1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 "icon_theme": "Zed (Default)",
14 // The name of a base set of key bindings to use.
15 // This setting can take six values, each named after another
16 // text editor:
17 //
18 // 1. "VSCode"
19 // 2. "Atom"
20 // 3. "JetBrains"
21 // 4. "None"
22 // 5. "SublimeText"
23 // 6. "TextMate"
24 "base_keymap": "VSCode",
25 // Features that can be globally enabled or disabled
26 "features": {
27 // Which edit prediction provider to use.
28 "edit_prediction_provider": "zed"
29 },
30 // The name of a font to use for rendering text in the editor
31 "buffer_font_family": "Zed Plex Mono",
32 // Set the buffer text's font fallbacks, this will be merged with
33 // the platform's default fallbacks.
34 "buffer_font_fallbacks": null,
35 // The OpenType features to enable for text in the editor.
36 "buffer_font_features": {
37 // Disable ligatures:
38 // "calt": false
39 },
40 // The default font size for text in the editor
41 "buffer_font_size": 15,
42 // The weight of the editor font in standard CSS units from 100 to 900.
43 "buffer_font_weight": 400,
44 // Set the buffer's line height.
45 // May take 3 values:
46 // 1. Use a line height that's comfortable for reading (1.618)
47 // "buffer_line_height": "comfortable"
48 // 2. Use a standard line height, (1.3)
49 // "buffer_line_height": "standard",
50 // 3. Use a custom line height
51 // "buffer_line_height": {
52 // "custom": 2
53 // },
54 "buffer_line_height": "comfortable",
55 // The name of a font to use for rendering text in the UI
56 // You can set this to ".SystemUIFont" to use the system font
57 "ui_font_family": "Zed Plex Sans",
58 // Set the UI's font fallbacks, this will be merged with the platform's
59 // default font fallbacks.
60 "ui_font_fallbacks": null,
61 // The OpenType features to enable for text in the UI
62 "ui_font_features": {
63 // Disable ligatures:
64 "calt": false
65 },
66 // The weight of the UI font in standard CSS units from 100 to 900.
67 "ui_font_weight": 400,
68 // The default font size for text in the UI
69 "ui_font_size": 16,
70 // How much to fade out unused code.
71 "unnecessary_code_fade": 0.3,
72 // Active pane styling settings.
73 "active_pane_modifiers": {
74 // The factor to grow the active pane by. Defaults to 1.0
75 // which gives the same size as all other panes.
76 "magnification": 1.0,
77 // Inset border size of the active pane, in pixels.
78 "border_size": 0.0,
79 // Opacity of the inactive panes. 0 means transparent, 1 means opaque.
80 // Values are clamped to the [0.0, 1.0] range.
81 "inactive_opacity": 1.0
82 },
83 // The direction that you want to split panes horizontally. Defaults to "up"
84 "pane_split_direction_horizontal": "up",
85 // The direction that you want to split panes horizontally. Defaults to "left"
86 "pane_split_direction_vertical": "left",
87 // Centered layout related settings.
88 "centered_layout": {
89 // The relative width of the left padding of the central pane from the
90 // workspace when the centered layout is used.
91 "left_padding": 0.2,
92 // The relative width of the right padding of the central pane from the
93 // workspace when the centered layout is used.
94 "right_padding": 0.2
95 },
96 // All settings related to the image viewer.
97 "image_viewer": {
98 // The unit for image file sizes.
99 // By default we're setting it to binary.
100 // The second option is decimal.
101 "unit": "binary"
102 },
103 // The key to use for adding multiple cursors
104 // Currently "alt" or "cmd_or_ctrl" (also aliased as
105 // "cmd" and "ctrl") are supported.
106 "multi_cursor_modifier": "alt",
107 // Whether to enable vim modes and key bindings.
108 "vim_mode": false,
109 // Whether to show the informational hover box when moving the mouse
110 // over symbols in the editor.
111 "hover_popover_enabled": true,
112 // Time to wait before showing the informational hover box
113 "hover_popover_delay": 350,
114 // Whether to confirm before quitting Zed.
115 "confirm_quit": false,
116 // Whether to restore last closed project when fresh Zed instance is opened.
117 "restore_on_startup": "last_session",
118 // Size of the drop target in the editor.
119 "drop_target_size": 0.2,
120 // Whether the window should be closed when using 'close active item' on a window with no tabs.
121 // May take 3 values:
122 // 1. Use the current platform's convention
123 // "when_closing_with_no_tabs": "platform_default"
124 // 2. Always close the window:
125 // "when_closing_with_no_tabs": "close_window",
126 // 3. Never close the window
127 // "when_closing_with_no_tabs": "keep_window_open",
128 "when_closing_with_no_tabs": "platform_default",
129 // What to do when the last window is closed.
130 // May take 2 values:
131 // 1. Use the current platform's convention
132 // "on_last_window_closed": "platform_default"
133 // 2. Always quit the application
134 // "on_last_window_closed": "quit_app",
135 "on_last_window_closed": "platform_default",
136 // Whether to use the system provided dialogs for Open and Save As.
137 // When set to false, Zed will use the built-in keyboard-first pickers.
138 "use_system_path_prompts": true,
139 // Whether to use the system provided dialogs for prompts, such as confirmation
140 // prompts.
141 // When set to false, Zed will use its built-in prompts. Note that on Linux,
142 // this option is ignored and Zed will always use the built-in prompts.
143 "use_system_prompts": true,
144 // Whether the cursor blinks in the editor.
145 "cursor_blink": true,
146 // Cursor shape for the default editor.
147 // 1. A vertical bar
148 // "bar"
149 // 2. A block that surrounds the following character
150 // "block"
151 // 3. An underline / underscore that runs along the following character
152 // "underline"
153 // 4. A box drawn around the following character
154 // "hollow"
155 //
156 // Default: not set, defaults to "bar"
157 "cursor_shape": null,
158 // Determines whether the mouse cursor is hidden when typing in an editor or input box.
159 "hide_mouse_while_typing": true,
160 // How to highlight the current line in the editor.
161 //
162 // 1. Don't highlight the current line:
163 // "none"
164 // 2. Highlight the gutter area:
165 // "gutter"
166 // 3. Highlight the editor area:
167 // "line"
168 // 4. Highlight the full line (default):
169 // "all"
170 "current_line_highlight": "all",
171 // Whether to highlight all occurrences of the selected text in an editor.
172 "selection_highlight": true,
173 // The debounce delay before querying highlights based on the selected text.
174 "selection_highlight_debounce": 50,
175 // The debounce delay before querying highlights from the language
176 // server based on the current cursor location.
177 "lsp_highlight_debounce": 75,
178 // Whether to pop the completions menu while typing in an editor without
179 // explicitly requesting it.
180 "show_completions_on_input": true,
181 // Whether to display inline and alongside documentation for items in the
182 // completions menu
183 "show_completion_documentation": true,
184 // Show method signatures in the editor, when inside parentheses.
185 "auto_signature_help": false,
186 // Whether to show the signature help after completion or a bracket pair inserted.
187 // If `auto_signature_help` is enabled, this setting will be treated as enabled also.
188 "show_signature_help_after_edits": false,
189 // What to do when go to definition yields no results.
190 //
191 // 1. Do nothing: `none`
192 // 2. Find references for the same symbol: `find_all_references` (default)
193 "go_to_definition_fallback": "find_all_references",
194 // Whether to show wrap guides (vertical rulers) in the editor.
195 // Setting this to true will show a guide at the 'preferred_line_length' value
196 // if 'soft_wrap' is set to 'preferred_line_length', and will show any
197 // additional guides as specified by the 'wrap_guides' setting.
198 "show_wrap_guides": true,
199 // Character counts at which to show wrap guides in the editor.
200 "wrap_guides": [],
201 // Hide the values of in variables from visual display in private files
202 "redact_private_values": false,
203 // The default number of lines to expand excerpts in the multibuffer by.
204 "expand_excerpt_lines": 3,
205 // Globs to match against file paths to determine if a file is private.
206 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
207 // Whether to use additional LSP queries to format (and amend) the code after
208 // every "trigger" symbol input, defined by LSP server capabilities.
209 "use_on_type_format": true,
210 // Whether to automatically add matching closing characters when typing
211 // opening parenthesis, bracket, brace, single or double quote characters.
212 // For example, when you type (, Zed will add a closing ) at the correct position.
213 "use_autoclose": true,
214 // Whether to automatically surround selected text when typing opening parenthesis,
215 // bracket, brace, single or double quote characters.
216 // For example, when you select text and type (, Zed will surround the text with ().
217 "use_auto_surround": true,
218 // Whether indentation of pasted content should be adjusted based on the context.
219 "auto_indent_on_paste": true,
220 // Controls how the editor handles the autoclosed characters.
221 // When set to `false`(default), skipping over and auto-removing of the closing characters
222 // happen only for auto-inserted characters.
223 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
224 // no matter how they were inserted.
225 "always_treat_brackets_as_autoclosed": false,
226 // Controls where the `editor::Rewrap` action is allowed in the current language scope.
227 //
228 // This setting can take three values:
229 //
230 // 1. Only allow rewrapping in comments:
231 // "in_comments"
232 // 2. Only allow rewrapping in the current selection(s):
233 // "in_selections"
234 // 3. Allow rewrapping anywhere:
235 // "anywhere"
236 //
237 // When using values other than `in_comments`, it is possible for the rewrapping to produce code
238 // that is syntactically invalid. Keep this in mind when selecting which behavior you would like
239 // to use.
240 //
241 // Note: This setting has no effect in Vim mode, as rewrap is already allowed everywhere.
242 "allow_rewrap": "in_comments",
243 // Controls whether edit predictions are shown immediately (true)
244 // or manually by triggering `editor::ShowEditPrediction` (false).
245 "show_edit_predictions": true,
246 // Controls whether edit predictions are shown in a given language scope.
247 // Example: ["string", "comment"]
248 "edit_predictions_disabled_in": [],
249 // Whether to show tabs and spaces in the editor.
250 // This setting can take four values:
251 //
252 // 1. Draw tabs and spaces only for the selected text (default):
253 // "selection"
254 // 2. Do not draw any tabs or spaces:
255 // "none"
256 // 3. Draw all invisible symbols:
257 // "all"
258 // 4. Draw whitespaces at boundaries only:
259 // "boundary"
260 // For a whitespace to be on a boundary, any of the following conditions need to be met:
261 // - It is a tab
262 // - It is adjacent to an edge (start or end)
263 // - It is adjacent to a whitespace (left or right)
264 "show_whitespaces": "selection",
265 // Settings related to calls in Zed
266 "calls": {
267 // Join calls with the microphone live by default
268 "mute_on_join": false,
269 // Share your project when you are the first to join a channel
270 "share_on_join": false
271 },
272 // Toolbar related settings
273 "toolbar": {
274 // Whether to show breadcrumbs.
275 "breadcrumbs": true,
276 // Whether to show quick action buttons.
277 "quick_actions": true,
278 // Whether to show the Selections menu in the editor toolbar
279 "selections_menu": true
280 },
281 // Scrollbar related settings
282 "scrollbar": {
283 // When to show the scrollbar in the editor.
284 // This setting can take four values:
285 //
286 // 1. Show the scrollbar if there's important information or
287 // follow the system's configured behavior (default):
288 // "auto"
289 // 2. Match the system's configured behavior:
290 // "system"
291 // 3. Always show the scrollbar:
292 // "always"
293 // 4. Never show the scrollbar:
294 // "never"
295 "show": "auto",
296 // Whether to show cursor positions in the scrollbar.
297 "cursors": true,
298 // Whether to show git diff indicators in the scrollbar.
299 "git_diff": true,
300 // Whether to show buffer search results in the scrollbar.
301 "search_results": true,
302 // Whether to show selected text occurrences in the scrollbar.
303 "selected_text": true,
304 // Whether to show selected symbol occurrences in the scrollbar.
305 "selected_symbol": true,
306 // Which diagnostic indicators to show in the scrollbar:
307 // - "none" or false: do not show diagnostics
308 // - "error": show only errors
309 // - "warning": show only errors and warnings
310 // - "information": show only errors, warnings, and information
311 // - "all" or true: show all diagnostics
312 "diagnostics": "all",
313 // Forcefully enable or disable the scrollbar for each axis
314 "axes": {
315 // When false, forcefully disables the horizontal scrollbar. Otherwise, obey other settings.
316 "horizontal": true,
317 // When false, forcefully disables the vertical scrollbar. Otherwise, obey other settings.
318 "vertical": true
319 }
320 },
321 // Enable middle-click paste on Linux.
322 "middle_click_paste": true,
323 // What to do when multibuffer is double clicked in some of its excerpts
324 // (parts of singleton buffers).
325 // May take 2 values:
326 // 1. Behave as a regular buffer and select the whole word (default).
327 // "double_click_in_multibuffer": "select"
328 // 2. Open the excerpt clicked as a new buffer in the new tab.
329 // "double_click_in_multibuffer": "open",
330 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
331 "double_click_in_multibuffer": "select",
332 "gutter": {
333 // Whether to show line numbers in the gutter.
334 "line_numbers": true,
335 // Whether to show code action buttons in the gutter.
336 "code_actions": true,
337 // Whether to show runnables buttons in the gutter.
338 "runnables": true,
339 // Whether to show breakpoints in the gutter.
340 "breakpoints": true,
341 // Whether to show fold buttons in the gutter.
342 "folds": true
343 },
344 "indent_guides": {
345 // Whether to show indent guides in the editor.
346 "enabled": true,
347 // The width of the indent guides in pixels, between 1 and 10.
348 "line_width": 1,
349 // The width of the active indent guide in pixels, between 1 and 10.
350 "active_line_width": 1,
351 // Determines how indent guides are colored.
352 // This setting can take the following three values:
353 //
354 // 1. "disabled"
355 // 2. "fixed"
356 // 3. "indent_aware"
357 "coloring": "fixed",
358 // Determines how indent guide backgrounds are colored.
359 // This setting can take the following two values:
360 //
361 // 1. "disabled"
362 // 2. "indent_aware"
363 "background_coloring": "disabled"
364 },
365 // Whether the editor will scroll beyond the last line.
366 "scroll_beyond_last_line": "one_page",
367 // The number of lines to keep above/below the cursor when scrolling.
368 "vertical_scroll_margin": 3,
369 // Whether to scroll when clicking near the edge of the visible text area.
370 "autoscroll_on_clicks": false,
371 // The number of characters to keep on either side when scrolling with the mouse
372 "horizontal_scroll_margin": 5,
373 // Scroll sensitivity multiplier. This multiplier is applied
374 // to both the horizontal and vertical delta values while scrolling.
375 "scroll_sensitivity": 1.0,
376 "relative_line_numbers": false,
377 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
378 "search_wrap": true,
379 // Search options to enable by default when opening new project and buffer searches.
380 "search": {
381 "whole_word": false,
382 "case_sensitive": false,
383 "include_ignored": false,
384 "regex": false
385 },
386 // When to populate a new search's query based on the text under the cursor.
387 // This setting can take the following three values:
388 //
389 // 1. Always populate the search query with the word under the cursor (default).
390 // "always"
391 // 2. Only populate the search query when there is text selected
392 // "selection"
393 // 3. Never populate the search query
394 // "never"
395 "seed_search_query_from_cursor": "always",
396 // When enabled, automatically adjusts search case sensitivity based on your query.
397 // If your search query contains any uppercase letters, the search becomes case-sensitive;
398 // if it contains only lowercase letters, the search becomes case-insensitive.
399 "use_smartcase_search": false,
400 // Inlay hint related settings
401 "inlay_hints": {
402 // Global switch to toggle hints on and off, switched off by default.
403 "enabled": false,
404 // Toggle certain types of hints on and off, all switched on by default.
405 "show_type_hints": true,
406 "show_parameter_hints": true,
407 // Corresponds to null/None LSP hint type value.
408 "show_other_hints": true,
409 // Whether to show a background for inlay hints.
410 //
411 // If set to `true`, the background will use the `hint.background` color from the current theme.
412 "show_background": false,
413 // Time to wait after editing the buffer, before requesting the hints,
414 // set to 0 to disable debouncing.
415 "edit_debounce_ms": 700,
416 // Time to wait after scrolling the buffer, before requesting the hints,
417 // set to 0 to disable debouncing.
418 "scroll_debounce_ms": 50,
419 // A set of modifiers which, when pressed, will toggle the visibility of inlay hints.
420 // If the set if empty or not all the modifiers specified are pressed, inlay hints will not be toggled.
421 "toggle_on_modifiers_press": {
422 "control": false,
423 "shift": false,
424 "alt": false,
425 "platform": false,
426 "function": false
427 }
428 },
429 "project_panel": {
430 // Whether to show the project panel button in the status bar
431 "button": true,
432 // Whether to hide the gitignore entries in the project panel.
433 "hide_gitignore": false,
434 // Default width of the project panel.
435 "default_width": 240,
436 // Where to dock the project panel. Can be 'left' or 'right'.
437 "dock": "left",
438 // Spacing between worktree entries in the project panel. Can be 'comfortable' or 'standard'.
439 "entry_spacing": "comfortable",
440 // Whether to show file icons in the project panel.
441 "file_icons": true,
442 // Whether to show folder icons or chevrons for directories in the project panel.
443 "folder_icons": true,
444 // Whether to show the git status in the project panel.
445 "git_status": true,
446 // Amount of indentation for nested items.
447 "indent_size": 20,
448 // Whether to reveal it in the project panel automatically,
449 // when a corresponding project entry becomes active.
450 // Gitignored entries are never auto revealed.
451 "auto_reveal_entries": true,
452 // Whether to fold directories automatically and show compact folders
453 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
454 "auto_fold_dirs": true,
455 // Scrollbar-related settings
456 "scrollbar": {
457 // When to show the scrollbar in the project panel.
458 // This setting can take five values:
459 //
460 // 1. null (default): Inherit editor settings
461 // 2. Show the scrollbar if there's important information or
462 // follow the system's configured behavior (default):
463 // "auto"
464 // 3. Match the system's configured behavior:
465 // "system"
466 // 4. Always show the scrollbar:
467 // "always"
468 // 5. Never show the scrollbar:
469 // "never"
470 "show": null
471 },
472 // Which files containing diagnostic errors/warnings to mark in the project panel.
473 // This setting can take the following three values:
474 //
475 // 1. Do not mark any files:
476 // "off"
477 // 2. Only mark files with errors:
478 // "errors"
479 // 3. Mark files with errors and warnings:
480 // "all"
481 "show_diagnostics": "all",
482 // Settings related to indent guides in the project panel.
483 "indent_guides": {
484 // When to show indent guides in the project panel.
485 // This setting can take two values:
486 //
487 // 1. Always show indent guides:
488 // "always"
489 // 2. Never show indent guides:
490 // "never"
491 "show": "always"
492 }
493 },
494 "outline_panel": {
495 // Whether to show the outline panel button in the status bar
496 "button": true,
497 // Default width of the outline panel.
498 "default_width": 300,
499 // Where to dock the outline panel. Can be 'left' or 'right'.
500 "dock": "left",
501 // Whether to show file icons in the outline panel.
502 "file_icons": true,
503 // Whether to show folder icons or chevrons for directories in the outline panel.
504 "folder_icons": true,
505 // Whether to show the git status in the outline panel.
506 "git_status": true,
507 // Amount of indentation for nested items.
508 "indent_size": 20,
509 // Whether to reveal it in the outline panel automatically,
510 // when a corresponding outline entry becomes active.
511 // Gitignored entries are never auto revealed.
512 "auto_reveal_entries": true,
513 // Whether to fold directories automatically
514 // when a directory has only one directory inside.
515 "auto_fold_dirs": true,
516 // Settings related to indent guides in the outline panel.
517 "indent_guides": {
518 // When to show indent guides in the outline panel.
519 // This setting can take two values:
520 //
521 // 1. Always show indent guides:
522 // "always"
523 // 2. Never show indent guides:
524 // "never"
525 "show": "always"
526 },
527 // Scrollbar-related settings
528 "scrollbar": {
529 // When to show the scrollbar in the project panel.
530 // This setting can take five values:
531 //
532 // 1. null (default): Inherit editor settings
533 // 2. Show the scrollbar if there's important information or
534 // follow the system's configured behavior (default):
535 // "auto"
536 // 3. Match the system's configured behavior:
537 // "system"
538 // 4. Always show the scrollbar:
539 // "always"
540 // 5. Never show the scrollbar:
541 // "never"
542 "show": null
543 }
544 },
545 "collaboration_panel": {
546 // Whether to show the collaboration panel button in the status bar.
547 "button": true,
548 // Where to dock the collaboration panel. Can be 'left' or 'right'.
549 "dock": "left",
550 // Default width of the collaboration panel.
551 "default_width": 240
552 },
553 "chat_panel": {
554 // When to show the chat panel button in the status bar.
555 // Can be 'never', 'always', or 'when_in_call',
556 // or a boolean (interpreted as 'never'/'always').
557 "button": "when_in_call",
558 // Where to the chat panel. Can be 'left' or 'right'.
559 "dock": "right",
560 // Default width of the chat panel.
561 "default_width": 240
562 },
563 "git_panel": {
564 // Whether to show the git panel button in the status bar.
565 "button": true,
566 // Where to show the git panel. Can be 'left' or 'right'.
567 "dock": "left",
568 // Default width of the git panel.
569 "default_width": 360,
570 // Style of the git status indicator in the panel.
571 //
572 // Default: icon
573 "status_style": "icon",
574 // What branch name to use if init.defaultBranch
575 // is not set
576 //
577 // Default: main
578 "fallback_branch_name": "main",
579
580 "scrollbar": {
581 // When to show the scrollbar in the git panel.
582 //
583 // Default: inherits editor scrollbar settings
584 "show": null
585 }
586 },
587 "message_editor": {
588 // Whether to automatically replace emoji shortcodes with emoji characters.
589 // For example: typing `:wave:` gets replaced with `👋`.
590 "auto_replace_emoji_shortcode": true
591 },
592 "notification_panel": {
593 // Whether to show the notification panel button in the status bar.
594 "button": true,
595 // Where to dock the notification panel. Can be 'left' or 'right'.
596 "dock": "right",
597 // Default width of the notification panel.
598 "default_width": 380
599 },
600 "assistant": {
601 // Version of this setting.
602 "version": "2",
603 // Whether the assistant is enabled.
604 "enabled": true,
605 // Whether to show the assistant panel button in the status bar.
606 "button": true,
607 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
608 "dock": "right",
609 // Default width when the assistant is docked to the left or right.
610 "default_width": 640,
611 // Default height when the assistant is docked to the bottom.
612 "default_height": 320,
613 // The default model to use when creating new chats.
614 "default_model": {
615 // The provider to use.
616 "provider": "zed.dev",
617 // The model to use.
618 "model": "claude-3-5-sonnet-latest"
619 },
620 // The model to use when applying edits from the assistant.
621 "editor_model": {
622 // The provider to use.
623 "provider": "zed.dev",
624 // The model to use.
625 "model": "claude-3-5-sonnet-latest"
626 },
627 "default_profile": "code-writer",
628 "profiles": {
629 "read-only": {
630 "name": "Read-only",
631 "tools": {
632 "diagnostics": true,
633 "fetch": true,
634 "list-directory": true,
635 "now": true,
636 "path-search": true,
637 "read-file": true,
638 "regex-search": true,
639 "thinking": true
640 }
641 },
642 "code-writer": {
643 "name": "Code Writer",
644 "tools": {
645 "bash": true,
646 "copy-path": true,
647 "create-file": true,
648 "delete-path": true,
649 "diagnostics": true,
650 "find-replace-file": true,
651 "edit-files": false,
652 "fetch": true,
653 "list-directory": true,
654 "move-path": true,
655 "now": true,
656 "path-search": true,
657 "read-file": true,
658 "regex-search": true,
659 "thinking": true
660 }
661 }
662 },
663 "notify_when_agent_waiting": true
664 },
665 // The settings for slash commands.
666 "slash_commands": {
667 // Settings for the `/docs` slash command.
668 "docs": {
669 // Whether `/docs` is enabled.
670 "enabled": false
671 },
672 // Settings for the `/project` slash command.
673 "project": {
674 // Whether `/project` is enabled.
675 "enabled": false
676 }
677 },
678 // Whether the screen sharing icon is shown in the os status bar.
679 "show_call_status_icon": true,
680 // Whether to use language servers to provide code intelligence.
681 "enable_language_server": true,
682 // Whether to perform linked edits of associated ranges, if the language server supports it.
683 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
684 "linked_edits": true,
685 // The list of language servers to use (or disable) for all languages.
686 //
687 // This is typically customized on a per-language basis.
688 "language_servers": ["..."],
689 // When to automatically save edited buffers. This setting can
690 // take four values.
691 //
692 // 1. Never automatically save:
693 // "autosave": "off",
694 // 2. Save when changing focus away from the Zed window:
695 // "autosave": "on_window_change",
696 // 3. Save when changing focus away from a specific buffer:
697 // "autosave": "on_focus_change",
698 // 4. Save when idle for a certain amount of time:
699 // "autosave": { "after_delay": {"milliseconds": 500} },
700 "autosave": "off",
701 // Maximum number of tabs per pane. Unset for unlimited.
702 "max_tabs": null,
703 // Settings related to the editor's tab bar.
704 "tab_bar": {
705 // Whether or not to show the tab bar in the editor
706 "show": true,
707 // Whether or not to show the navigation history buttons.
708 "show_nav_history_buttons": true,
709 // Whether or not to show the tab bar buttons.
710 "show_tab_bar_buttons": true
711 },
712 // Settings related to the editor's tabs
713 "tabs": {
714 // Show git status colors in the editor tabs.
715 "git_status": false,
716 // Position of the close button on the editor tabs.
717 // One of: ["right", "left", "hidden"]
718 "close_position": "right",
719 // Whether to show the file icon for a tab.
720 "file_icons": false,
721 // Controls the appearance behavior of the tab's close button.
722 //
723 // 1. Show it just upon hovering the tab. (default)
724 // "hover"
725 // 2. Show it persistently.
726 // "always"
727 // 3. Never show it, even if hovering it.
728 // "hidden"
729 "show_close_button": "hover",
730 // What to do after closing the current tab.
731 //
732 // 1. Activate the tab that was open previously (default)
733 // "history"
734 // 2. Activate the right neighbour tab if present
735 // "neighbour"
736 // 3. Activate the left neighbour tab if present
737 // "left_neighbour"
738 "activate_on_close": "history",
739 // Which files containing diagnostic errors/warnings to mark in the tabs.
740 // Diagnostics are only shown when file icons are also active.
741 // This setting only works when can take the following three values:
742 //
743 // 1. Do not mark any files:
744 // "off"
745 // 2. Only mark files with errors:
746 // "errors"
747 // 3. Mark files with errors and warnings:
748 // "all"
749 "show_diagnostics": "off"
750 },
751 // Settings related to preview tabs.
752 "preview_tabs": {
753 // Whether preview tabs should be enabled.
754 // Preview tabs allow you to open files in preview mode, where they close automatically
755 // when you switch to another file unless you explicitly pin them.
756 // This is useful for quickly viewing files without cluttering your workspace.
757 "enabled": true,
758 // Whether to open tabs in preview mode when selected from the file finder.
759 "enable_preview_from_file_finder": false,
760 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
761 "enable_preview_from_code_navigation": false
762 },
763 // Settings related to the file finder.
764 "file_finder": {
765 // Whether to show file icons in the file finder.
766 "file_icons": true,
767 // Determines how much space the file finder can take up in relation to the available window width.
768 // There are 5 possible width values:
769 //
770 // 1. Small: This value is essentially a fixed width.
771 // "modal_max_width": "small"
772 // 2. Medium:
773 // "modal_max_width": "medium"
774 // 3. Large:
775 // "modal_max_width": "large"
776 // 4. Extra Large:
777 // "modal_max_width": "xlarge"
778 // 5. Fullscreen: This value removes any horizontal padding, as it consumes the whole viewport width.
779 // "modal_max_width": "full"
780 //
781 // Default: small
782 "modal_max_width": "small"
783 },
784 // Whether or not to remove any trailing whitespace from lines of a buffer
785 // before saving it.
786 "remove_trailing_whitespace_on_save": true,
787 // Whether to start a new line with a comment when a previous line is a comment as well.
788 "extend_comment_on_newline": true,
789 // Removes any lines containing only whitespace at the end of the file and
790 // ensures just one newline at the end.
791 "ensure_final_newline_on_save": true,
792 // Whether or not to perform a buffer format before saving
793 //
794 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
795 "format_on_save": "on",
796 // How to perform a buffer format. This setting can take 4 values:
797 //
798 // 1. Format code using the current language server:
799 // "formatter": "language_server"
800 // 2. Format code using an external command:
801 // "formatter": {
802 // "external": {
803 // "command": "prettier",
804 // "arguments": ["--stdin-filepath", "{buffer_path}"]
805 // }
806 // }
807 // 3. Format code using Zed's Prettier integration:
808 // "formatter": "prettier"
809 // 4. Default. Format files using Zed's Prettier integration (if applicable),
810 // or falling back to formatting via language server:
811 // "formatter": "auto"
812 "formatter": "auto",
813 // How to soft-wrap long lines of text.
814 // Possible values:
815 //
816 // 1. Prefer a single line generally, unless an overly long line is encountered.
817 // "soft_wrap": "none",
818 // "soft_wrap": "prefer_line", // (deprecated, same as "none")
819 // 2. Soft wrap lines that overflow the editor.
820 // "soft_wrap": "editor_width",
821 // 3. Soft wrap lines at the preferred line length.
822 // "soft_wrap": "preferred_line_length",
823 // 4. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
824 // "soft_wrap": "bounded",
825 "soft_wrap": "none",
826 // The column at which to soft-wrap lines, for buffers where soft-wrap
827 // is enabled.
828 "preferred_line_length": 80,
829 // Whether to indent lines using tab characters, as opposed to multiple
830 // spaces.
831 "hard_tabs": false,
832 // How many columns a tab should occupy.
833 "tab_size": 4,
834 // Control what info is collected by Zed.
835 "telemetry": {
836 // Send debug info like crash reports.
837 "diagnostics": true,
838 // Send anonymized usage data like what languages you're using Zed with.
839 "metrics": true
840 },
841 // Automatically update Zed. This setting may be ignored on Linux if
842 // installed through a package manager.
843 "auto_update": true,
844 // Diagnostics configuration.
845 "diagnostics": {
846 // Whether to show warnings or not by default.
847 "include_warnings": true,
848 // Settings for inline diagnostics
849 "inline": {
850 // Whether to show diagnostics inline or not
851 "enabled": false,
852 // The delay in milliseconds to show inline diagnostics after the
853 // last diagnostic update.
854 "update_debounce_ms": 150,
855 // The amount of padding between the end of the source line and the start
856 // of the inline diagnostic in units of em widths.
857 "padding": 4,
858 // The minimum column to display inline diagnostics. This setting can be
859 // used to horizontally align inline diagnostics at some column. Lines
860 // longer than this value will still push diagnostics further to the right.
861 "min_column": 0,
862 // The minimum severity of the diagnostics to show inline.
863 // Shows all diagnostics when not specified.
864 "max_severity": null
865 }
866 },
867 // Files or globs of files that will be excluded by Zed entirely. They will be skipped during file
868 // scans, file searches, and not be displayed in the project file tree. Takes precedence over `file_scan_inclusions`.
869 "file_scan_exclusions": [
870 "**/.git",
871 "**/.svn",
872 "**/.hg",
873 "**/.jj",
874 "**/CVS",
875 "**/.DS_Store",
876 "**/Thumbs.db",
877 "**/.classpath",
878 "**/.settings"
879 ],
880 // Files or globs of files that will be included by Zed, even when ignored by git. This is useful
881 // for files that are not tracked by git, but are still important to your project. Note that globs
882 // that are overly broad can slow down Zed's file scanning. `file_scan_exclusions` takes
883 // precedence over these inclusions.
884 "file_scan_inclusions": [".env*"],
885 // Git gutter behavior configuration.
886 "git": {
887 // Control whether the git gutter is shown. May take 2 values:
888 // 1. Show the gutter
889 // "git_gutter": "tracked_files"
890 // 2. Hide the gutter
891 // "git_gutter": "hide"
892 "git_gutter": "tracked_files",
893 // Control whether the git blame information is shown inline,
894 // in the currently focused line.
895 "inline_blame": {
896 "enabled": true
897 // Sets a delay after which the inline blame information is shown.
898 // Delay is restarted with every cursor movement.
899 // "delay_ms": 600
900 //
901 // Whether or not to display the git commit summary on the same line.
902 // "show_commit_summary": false
903 //
904 // The minimum column number to show the inline blame information at
905 // "min_column": 0
906 },
907 // How git hunks are displayed visually in the editor.
908 // This setting can take two values:
909 //
910 // 1. Show unstaged hunks filled and staged hunks hollow:
911 // "hunk_style": "staged_hollow"
912 // 2. Show unstaged hunks hollow and staged hunks filled:
913 // "hunk_style": "unstaged_hollow"
914 "hunk_style": "staged_hollow"
915 },
916 // The list of custom Git hosting providers.
917 "git_hosting_providers": [
918 // {
919 // "provider": "github",
920 // "name": "BigCorp GitHub",
921 // "base_url": "https://code.big-corp.com"
922 // }
923 ],
924 // Configuration for how direnv configuration should be loaded. May take 2 values:
925 // 1. Load direnv configuration using `direnv export json` directly.
926 // "load_direnv": "direct"
927 // 2. Load direnv configuration through the shell hook, works for POSIX shells and fish.
928 // "load_direnv": "shell_hook"
929 "load_direnv": "direct",
930 "edit_predictions": {
931 // A list of globs representing files that edit predictions should be disabled for.
932 // There's a sensible default list of globs already included.
933 // Any addition to this list will be merged with the default list.
934 // Globs are matched relative to the worktree root,
935 // except when starting with a slash (/) or equivalent in Windows.
936 "disabled_globs": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/.dev.vars", "**/secrets.yml"],
937 // When to show edit predictions previews in buffer.
938 // This setting takes two possible values:
939 // 1. Display predictions inline when there are no language server completions available.
940 // "mode": "eager"
941 // 2. Display predictions inline only when holding a modifier key (alt by default).
942 // "mode": "subtle"
943 "mode": "eager",
944 // Whether edit predictions are enabled in the assistant panel.
945 // This setting has no effect if globally disabled.
946 "enabled_in_assistant": true
947 },
948 // Settings specific to journaling
949 "journal": {
950 // The path of the directory where journal entries are stored
951 "path": "~",
952 // What format to display the hours in
953 // May take 2 values:
954 // 1. hour12
955 // 2. hour24
956 "hour_format": "hour12"
957 },
958 // Settings specific to the terminal
959 "terminal": {
960 // What shell to use when opening a terminal. May take 3 values:
961 // 1. Use the system's default terminal configuration in /etc/passwd
962 // "shell": "system"
963 // 2. A program:
964 // "shell": {
965 // "program": "sh"
966 // }
967 // 3. A program with arguments:
968 // "shell": {
969 // "with_arguments": {
970 // "program": "/bin/bash",
971 // "args": ["--login"]
972 // }
973 // }
974 "shell": "system",
975 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
976 "dock": "bottom",
977 // Default width when the terminal is docked to the left or right.
978 "default_width": 640,
979 // Default height when the terminal is docked to the bottom.
980 "default_height": 320,
981 // What working directory to use when launching the terminal.
982 // May take 4 values:
983 // 1. Use the current file's project directory. Will Fallback to the
984 // first project directory strategy if unsuccessful
985 // "working_directory": "current_project_directory"
986 // 2. Use the first project in this workspace's directory
987 // "working_directory": "first_project_directory"
988 // 3. Always use this platform's home directory (if we can find it)
989 // "working_directory": "always_home"
990 // 4. Always use a specific directory. This value will be shell expanded.
991 // If this path is not a valid directory the terminal will default to
992 // this platform's home directory (if we can find it)
993 // "working_directory": {
994 // "always": {
995 // "directory": "~/zed/projects/"
996 // }
997 // }
998 "working_directory": "current_project_directory",
999 // Set the cursor blinking behavior in the terminal.
1000 // May take 3 values:
1001 // 1. Never blink the cursor, ignoring the terminal mode
1002 // "blinking": "off",
1003 // 2. Default the cursor blink to off, but allow the terminal to
1004 // set blinking
1005 // "blinking": "terminal_controlled",
1006 // 3. Always blink the cursor, ignoring the terminal mode
1007 // "blinking": "on",
1008 "blinking": "terminal_controlled",
1009 // Default cursor shape for the terminal.
1010 // 1. A block that surrounds the following character
1011 // "block"
1012 // 2. A vertical bar
1013 // "bar"
1014 // 3. An underline / underscore that runs along the following character
1015 // "underline"
1016 // 4. A box drawn around the following character
1017 // "hollow"
1018 //
1019 // Default: not set, defaults to "block"
1020 "cursor_shape": null,
1021 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
1022 // Alternate Scroll mode converts mouse scroll events into up / down key
1023 // presses when in the alternate screen (e.g. when running applications
1024 // like vim or less). The terminal can still set and unset this mode.
1025 // May take 2 values:
1026 // 1. Default alternate scroll mode to on
1027 // "alternate_scroll": "on",
1028 // 2. Default alternate scroll mode to off
1029 // "alternate_scroll": "off",
1030 "alternate_scroll": "on",
1031 // Set whether the option key behaves as the meta key.
1032 // May take 2 values:
1033 // 1. Rely on default platform handling of option key, on macOS
1034 // this means generating certain unicode characters
1035 // "option_as_meta": false,
1036 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
1037 // "option_as_meta": true,
1038 "option_as_meta": false,
1039 // Whether or not selecting text in the terminal will automatically
1040 // copy to the system clipboard.
1041 "copy_on_select": false,
1042 // Whether to show the terminal button in the status bar
1043 "button": true,
1044 // Any key-value pairs added to this list will be added to the terminal's
1045 // environment. Use `:` to separate multiple values.
1046 "env": {
1047 // "KEY": "value1:value2"
1048 },
1049 // Set the terminal's line height.
1050 // May take 3 values:
1051 // 1. Use a line height that's comfortable for reading, 1.618
1052 // "line_height": "comfortable"
1053 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
1054 // particularly if they use box characters
1055 // "line_height": "standard",
1056 // 3. Use a custom line height.
1057 // "line_height": {
1058 // "custom": 2
1059 // },
1060 "line_height": "comfortable",
1061 // Activate the python virtual environment, if one is found, in the
1062 // terminal's working directory (as resolved by the working_directory
1063 // setting). Set this to "off" to disable this behavior.
1064 "detect_venv": {
1065 "on": {
1066 // Default directories to search for virtual environments, relative
1067 // to the current working directory. We recommend overriding this
1068 // in your project's settings, rather than globally.
1069 "directories": [".env", "env", ".venv", "venv"],
1070 // Can also be `csh`, `fish`, `nushell` and `power_shell`
1071 "activate_script": "default"
1072 }
1073 },
1074 "toolbar": {
1075 // Whether to display the terminal title in its toolbar's breadcrumbs.
1076 // Only shown if the terminal title is not empty.
1077 //
1078 // The shell running in the terminal needs to be configured to emit the title.
1079 // Example: `echo -e "\e]2;New Title\007";`
1080 "breadcrumbs": true
1081 },
1082 // Scrollbar-related settings
1083 "scrollbar": {
1084 // When to show the scrollbar in the terminal.
1085 // This setting can take five values:
1086 //
1087 // 1. null (default): Inherit editor settings
1088 // 2. Show the scrollbar if there's important information or
1089 // follow the system's configured behavior (default):
1090 // "auto"
1091 // 3. Match the system's configured behavior:
1092 // "system"
1093 // 4. Always show the scrollbar:
1094 // "always"
1095 // 5. Never show the scrollbar:
1096 // "never"
1097 "show": null
1098 }
1099 // Set the terminal's font size. If this option is not included,
1100 // the terminal will default to matching the buffer's font size.
1101 // "font_size": 15,
1102 // Set the terminal's font family. If this option is not included,
1103 // the terminal will default to matching the buffer's font family.
1104 // "font_family": "Zed Plex Mono",
1105 // Set the terminal's font fallbacks. If this option is not included,
1106 // the terminal will default to matching the buffer's font fallbacks.
1107 // This will be merged with the platform's default font fallbacks
1108 // "font_fallbacks": ["FiraCode Nerd Fonts"],
1109 // Sets the maximum number of lines in the terminal's scrollback buffer.
1110 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
1111 // Existing terminals will not pick up this change until they are recreated.
1112 // "max_scroll_history_lines": 10000,
1113 },
1114 "code_actions_on_format": {},
1115 // Settings related to running tasks.
1116 "tasks": {
1117 "variables": {}
1118 },
1119 // An object whose keys are language names, and whose values
1120 // are arrays of filenames or extensions of files that should
1121 // use those languages.
1122 //
1123 // For example, to treat files like `foo.notjs` as JavaScript,
1124 // and `Embargo.lock` as TOML:
1125 //
1126 // {
1127 // "JavaScript": ["notjs"],
1128 // "TOML": ["Embargo.lock"]
1129 // }
1130 //
1131 "file_types": {
1132 "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "**/.vscode/**/*.json"],
1133 "Shell Script": [".env.*"]
1134 },
1135 // By default use a recent system version of node, or install our own.
1136 // You can override this to use a version of node that is not in $PATH with:
1137 // {
1138 // "node": {
1139 // "path": "/path/to/node"
1140 // "npm_path": "/path/to/npm" (defaults to node_path/../npm)
1141 // }
1142 // }
1143 // or to ensure Zed always downloads and installs an isolated version of node:
1144 // {
1145 // "node": {
1146 // "ignore_system_version": true,
1147 // }
1148 // NOTE: changing this setting currently requires restarting Zed.
1149 "node": {},
1150 // The extensions that Zed should automatically install on startup.
1151 //
1152 // If you don't want any of these extensions, add this field to your settings
1153 // and change the value to `false`.
1154 "auto_install_extensions": {
1155 "html": true
1156 },
1157 // Controls how completions are processed for this language.
1158 "completions": {
1159 // Controls how words are completed.
1160 // For large documents, not all words may be fetched for completion.
1161 //
1162 // May take 3 values:
1163 // 1. "enabled"
1164 // Always fetch document's words for completions along with LSP completions.
1165 // 2. "fallback"
1166 // Only if LSP response errors or times out, use document's words to show completions.
1167 // 3. "disabled"
1168 // Never fetch or complete document's words for completions.
1169 // (Word-based completions can still be queried via a separate action)
1170 //
1171 // Default: fallback
1172 "words": "fallback",
1173 // Whether to fetch LSP completions or not.
1174 //
1175 // Default: true
1176 "lsp": true,
1177 // When fetching LSP completions, determines how long to wait for a response of a particular server.
1178 // When set to 0, waits indefinitely.
1179 //
1180 // Default: 0
1181 "lsp_fetch_timeout_ms": 0
1182 },
1183 // Different settings for specific languages.
1184 "languages": {
1185 "Astro": {
1186 "language_servers": ["astro-language-server", "..."],
1187 "prettier": {
1188 "allowed": true,
1189 "plugins": ["prettier-plugin-astro"]
1190 }
1191 },
1192 "Blade": {
1193 "prettier": {
1194 "allowed": true
1195 }
1196 },
1197 "C": {
1198 "format_on_save": "off",
1199 "use_on_type_format": false,
1200 "prettier": {
1201 "allowed": false
1202 }
1203 },
1204 "C++": {
1205 "format_on_save": "off",
1206 "use_on_type_format": false,
1207 "prettier": {
1208 "allowed": false
1209 }
1210 },
1211 "CSS": {
1212 "prettier": {
1213 "allowed": true
1214 }
1215 },
1216 "Dart": {
1217 "tab_size": 2
1218 },
1219 "Diff": {
1220 "show_edit_predictions": false,
1221 "remove_trailing_whitespace_on_save": false,
1222 "ensure_final_newline_on_save": false
1223 },
1224 "Elixir": {
1225 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1226 },
1227 "Erlang": {
1228 "language_servers": ["erlang-ls", "!elp", "..."]
1229 },
1230 "Git Commit": {
1231 "allow_rewrap": "anywhere"
1232 },
1233 "Go": {
1234 "code_actions_on_format": {
1235 "source.organizeImports": true
1236 }
1237 },
1238 "GraphQL": {
1239 "prettier": {
1240 "allowed": true
1241 }
1242 },
1243 "HEEX": {
1244 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1245 },
1246 "HTML": {
1247 "prettier": {
1248 "allowed": true
1249 }
1250 },
1251 "Java": {
1252 "prettier": {
1253 "allowed": true,
1254 "plugins": ["prettier-plugin-java"]
1255 }
1256 },
1257 "JavaScript": {
1258 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1259 "prettier": {
1260 "allowed": true
1261 }
1262 },
1263 "JSON": {
1264 "prettier": {
1265 "allowed": true
1266 }
1267 },
1268 "JSONC": {
1269 "prettier": {
1270 "allowed": true
1271 }
1272 },
1273 "LaTeX": {
1274 "format_on_save": "on",
1275 "formatter": "language_server",
1276 "language_servers": ["texlab", "..."],
1277 "prettier": {
1278 "allowed": false
1279 }
1280 },
1281 "Markdown": {
1282 "format_on_save": "off",
1283 "use_on_type_format": false,
1284 "allow_rewrap": "anywhere",
1285 "soft_wrap": "editor_width",
1286 "prettier": {
1287 "allowed": true
1288 }
1289 },
1290 "PHP": {
1291 "language_servers": ["phpactor", "!intelephense", "..."],
1292 "prettier": {
1293 "allowed": true,
1294 "plugins": ["@prettier/plugin-php"],
1295 "parser": "php"
1296 }
1297 },
1298 "Plain Text": {
1299 "allow_rewrap": "anywhere"
1300 },
1301 "Ruby": {
1302 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
1303 },
1304 "SCSS": {
1305 "prettier": {
1306 "allowed": true
1307 }
1308 },
1309 "SQL": {
1310 "prettier": {
1311 "allowed": true,
1312 "plugins": ["prettier-plugin-sql"]
1313 }
1314 },
1315 "Starlark": {
1316 "language_servers": ["starpls", "!buck2-lsp", "..."]
1317 },
1318 "Svelte": {
1319 "language_servers": ["svelte-language-server", "..."],
1320 "prettier": {
1321 "allowed": true,
1322 "plugins": ["prettier-plugin-svelte"]
1323 }
1324 },
1325 "TSX": {
1326 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1327 "prettier": {
1328 "allowed": true
1329 }
1330 },
1331 "Twig": {
1332 "prettier": {
1333 "allowed": true
1334 }
1335 },
1336 "TypeScript": {
1337 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1338 "prettier": {
1339 "allowed": true
1340 }
1341 },
1342 "Vue.js": {
1343 "language_servers": ["vue-language-server", "..."],
1344 "prettier": {
1345 "allowed": true
1346 }
1347 },
1348 "XML": {
1349 "prettier": {
1350 "allowed": true,
1351 "plugins": ["@prettier/plugin-xml"]
1352 }
1353 },
1354 "YAML": {
1355 "prettier": {
1356 "allowed": true
1357 }
1358 },
1359 "Zig": {
1360 "language_servers": ["zls", "..."]
1361 }
1362 },
1363 // Different settings for specific language models.
1364 "language_models": {
1365 "anthropic": {
1366 "version": "1",
1367 "api_url": "https://api.anthropic.com"
1368 },
1369 "google": {
1370 "api_url": "https://generativelanguage.googleapis.com"
1371 },
1372 "ollama": {
1373 "api_url": "http://localhost:11434"
1374 },
1375 "openai": {
1376 "version": "1",
1377 "api_url": "https://api.openai.com/v1"
1378 },
1379 "lmstudio": {
1380 "api_url": "http://localhost:1234/api/v0"
1381 },
1382 "deepseek": {
1383 "api_url": "https://api.deepseek.com"
1384 },
1385 "mistral": {
1386 "api_url": "https://api.mistral.ai/v1"
1387 }
1388 },
1389 // Zed's Prettier integration settings.
1390 // Allows to enable/disable formatting with Prettier
1391 // and configure default Prettier, used when no project-level Prettier installation is found.
1392 "prettier": {
1393 // // Whether to consider prettier formatter or not when attempting to format a file.
1394 // "allowed": false,
1395 //
1396 // // Use regular Prettier json configuration.
1397 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1398 // // the project has no other Prettier installed.
1399 // "plugins": [],
1400 //
1401 // // Use regular Prettier json configuration.
1402 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1403 // // the project has no other Prettier installed.
1404 // "trailingComma": "es5",
1405 // "tabWidth": 4,
1406 // "semi": false,
1407 // "singleQuote": true
1408 },
1409 // Settings for auto-closing of JSX tags.
1410 "jsx_tag_auto_close": {
1411 "enabled": true
1412 },
1413 // LSP Specific settings.
1414 "lsp": {
1415 // Specify the LSP name as a key here.
1416 // "rust-analyzer": {
1417 // // These initialization options are merged into Zed's defaults
1418 // "initialization_options": {
1419 // "check": {
1420 // "command": "clippy" // rust-analyzer.check.command (default: "check")
1421 // }
1422 // }
1423 // }
1424 },
1425 // Jupyter settings
1426 "jupyter": {
1427 "enabled": true
1428 // Specify the language name as the key and the kernel name as the value.
1429 // "kernel_selections": {
1430 // "python": "conda-base"
1431 // "typescript": "deno"
1432 // }
1433 },
1434 // Vim settings
1435 "vim": {
1436 "default_mode": "normal",
1437 "toggle_relative_line_numbers": false,
1438 "use_system_clipboard": "always",
1439 "use_multiline_find": false,
1440 "use_smartcase_find": false,
1441 "highlight_on_yank_duration": 200,
1442 "custom_digraphs": {}
1443 },
1444 // The server to connect to. If the environment variable
1445 // ZED_SERVER_URL is set, it will override this setting.
1446 "server_url": "https://zed.dev",
1447 // Settings overrides to use when using Zed Preview.
1448 // Mostly useful for developers who are managing multiple instances of Zed.
1449 "preview": {
1450 // "theme": "Andromeda"
1451 },
1452 // Settings overrides to use when using Zed Nightly.
1453 // Mostly useful for developers who are managing multiple instances of Zed.
1454 "nightly": {
1455 // "theme": "Andromeda"
1456 },
1457 // Settings overrides to use when using Zed Stable.
1458 // Mostly useful for developers who are managing multiple instances of Zed.
1459 "stable": {
1460 // "theme": "Andromeda"
1461 },
1462 // Settings overrides to use when using Zed Dev.
1463 // Mostly useful for developers who are managing multiple instances of Zed.
1464 "dev": {
1465 // "theme": "Andromeda"
1466 },
1467 // Task-related settings.
1468 "task": {
1469 // Whether to show task status indicator in the status bar. Default: true
1470 "show_status_indicator": true
1471 },
1472 // Whether to show full labels in line indicator or short ones
1473 //
1474 // Values:
1475 // - `short`: "2 s, 15 l, 32 c"
1476 // - `long`: "2 selections, 15 lines, 32 characters"
1477 // Default: long
1478 "line_indicator_format": "long",
1479 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1480 //
1481 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1482 // `socks5h`. `http` will be used when no scheme is specified.
1483 //
1484 // By default no proxy will be used, or Zed will try get proxy settings from
1485 // environment variables.
1486 //
1487 // Examples:
1488 // - "proxy": "socks5h://localhost:10808"
1489 // - "proxy": "http://127.0.0.1:10809"
1490 "proxy": null,
1491 // Set to configure aliases for the command palette.
1492 // When typing a query which is a key of this object, the value will be used instead.
1493 //
1494 // Examples:
1495 // {
1496 // "W": "workspace::Save"
1497 // }
1498 "command_aliases": {},
1499 // Whether to show user picture in titlebar.
1500 "show_user_picture": true,
1501 // ssh_connections is an array of ssh connections.
1502 // You can configure these from `project: Open Remote` in the command palette.
1503 // Zed's ssh support will pull configuration from your ~/.ssh too.
1504 // Examples:
1505 // [
1506 // {
1507 // "host": "example-box",
1508 // // "port": 22, "username": "test", "args": ["-i", "/home/user/.ssh/id_rsa"]
1509 // "projects": [
1510 // {
1511 // "paths": ["/home/user/code/zed"]
1512 // }
1513 // ]
1514 // }
1515 // ]
1516 "ssh_connections": [],
1517
1518 // Configures context servers for use in the Assistant.
1519 "context_servers": {},
1520 "debugger": {
1521 "stepping_granularity": "line",
1522 "save_breakpoints": true,
1523 "button": true
1524 }
1525}