1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 "icon_theme": "Zed (Default)",
14 // The name of a base set of key bindings to use.
15 // This setting can take six values, each named after another
16 // text editor:
17 //
18 // 1. "VSCode"
19 // 2. "Atom"
20 // 3. "JetBrains"
21 // 4. "None"
22 // 5. "SublimeText"
23 // 6. "TextMate"
24 "base_keymap": "VSCode",
25 // Features that can be globally enabled or disabled
26 "features": {
27 // Which edit prediction provider to use.
28 "edit_prediction_provider": "zed"
29 },
30 // The name of a font to use for rendering text in the editor
31 "buffer_font_family": "Zed Plex Mono",
32 // Set the buffer text's font fallbacks, this will be merged with
33 // the platform's default fallbacks.
34 "buffer_font_fallbacks": null,
35 // The OpenType features to enable for text in the editor.
36 "buffer_font_features": {
37 // Disable ligatures:
38 // "calt": false
39 },
40 // The default font size for text in the editor
41 "buffer_font_size": 15,
42 // The weight of the editor font in standard CSS units from 100 to 900.
43 "buffer_font_weight": 400,
44 // Set the buffer's line height.
45 // May take 3 values:
46 // 1. Use a line height that's comfortable for reading (1.618)
47 // "buffer_line_height": "comfortable"
48 // 2. Use a standard line height, (1.3)
49 // "buffer_line_height": "standard",
50 // 3. Use a custom line height
51 // "buffer_line_height": {
52 // "custom": 2
53 // },
54 "buffer_line_height": "comfortable",
55 // The name of a font to use for rendering text in the UI
56 // You can set this to ".SystemUIFont" to use the system font
57 "ui_font_family": "Zed Plex Sans",
58 // Set the UI's font fallbacks, this will be merged with the platform's
59 // default font fallbacks.
60 "ui_font_fallbacks": null,
61 // The OpenType features to enable for text in the UI
62 "ui_font_features": {
63 // Disable ligatures:
64 "calt": false
65 },
66 // The weight of the UI font in standard CSS units from 100 to 900.
67 "ui_font_weight": 400,
68 // The default font size for text in the UI
69 "ui_font_size": 16,
70 // How much to fade out unused code.
71 "unnecessary_code_fade": 0.3,
72 // Active pane styling settings.
73 "active_pane_modifiers": {
74 // The factor to grow the active pane by. Defaults to 1.0
75 // which gives the same size as all other panes.
76 "magnification": 1.0,
77 // Inset border size of the active pane, in pixels.
78 "border_size": 0.0,
79 // Opacity of the inactive panes. 0 means transparent, 1 means opaque.
80 // Values are clamped to the [0.0, 1.0] range.
81 "inactive_opacity": 1.0
82 },
83 // The direction that you want to split panes horizontally. Defaults to "up"
84 "pane_split_direction_horizontal": "up",
85 // The direction that you want to split panes horizontally. Defaults to "left"
86 "pane_split_direction_vertical": "left",
87 // Centered layout related settings.
88 "centered_layout": {
89 // The relative width of the left padding of the central pane from the
90 // workspace when the centered layout is used.
91 "left_padding": 0.2,
92 // The relative width of the right padding of the central pane from the
93 // workspace when the centered layout is used.
94 "right_padding": 0.2
95 },
96 // All settings related to the image viewer.
97 "image_viewer": {
98 // The unit for image file sizes.
99 // By default we're setting it to binary.
100 // The second option is decimal.
101 "unit": "binary"
102 },
103 // The key to use for adding multiple cursors
104 // Currently "alt" or "cmd_or_ctrl" (also aliased as
105 // "cmd" and "ctrl") are supported.
106 "multi_cursor_modifier": "alt",
107 // Whether to enable vim modes and key bindings.
108 "vim_mode": false,
109 // Whether to show the informational hover box when moving the mouse
110 // over symbols in the editor.
111 "hover_popover_enabled": true,
112 // Time to wait before showing the informational hover box
113 "hover_popover_delay": 350,
114 // Whether to confirm before quitting Zed.
115 "confirm_quit": false,
116 // Whether to restore last closed project when fresh Zed instance is opened.
117 "restore_on_startup": "last_session",
118 // Whether to attempt to restore previous file's state when opening it again.
119 // The state is stored per pane.
120 // When disabled, defaults are applied instead of the state restoration.
121 //
122 // E.g. for editors, selections, folds and scroll positions are restored, if the same file is closed and, later, opened again in the same pane.
123 // When disabled, a single selection in the very beginning of the file, zero scroll position and no folds state is used as a default.
124 //
125 // Default: true
126 "restore_on_file_reopen": true,
127 // Size of the drop target in the editor.
128 "drop_target_size": 0.2,
129 // Whether the window should be closed when using 'close active item' on a window with no tabs.
130 // May take 3 values:
131 // 1. Use the current platform's convention
132 // "when_closing_with_no_tabs": "platform_default"
133 // 2. Always close the window:
134 // "when_closing_with_no_tabs": "close_window",
135 // 3. Never close the window
136 // "when_closing_with_no_tabs": "keep_window_open",
137 "when_closing_with_no_tabs": "platform_default",
138 // What to do when the last window is closed.
139 // May take 2 values:
140 // 1. Use the current platform's convention
141 // "on_last_window_closed": "platform_default"
142 // 2. Always quit the application
143 // "on_last_window_closed": "quit_app",
144 "on_last_window_closed": "platform_default",
145 // Whether to use the system provided dialogs for Open and Save As.
146 // When set to false, Zed will use the built-in keyboard-first pickers.
147 "use_system_path_prompts": true,
148 // Whether to use the system provided dialogs for prompts, such as confirmation
149 // prompts.
150 // When set to false, Zed will use its built-in prompts. Note that on Linux,
151 // this option is ignored and Zed will always use the built-in prompts.
152 "use_system_prompts": true,
153 // Whether the cursor blinks in the editor.
154 "cursor_blink": true,
155 // Cursor shape for the default editor.
156 // 1. A vertical bar
157 // "bar"
158 // 2. A block that surrounds the following character
159 // "block"
160 // 3. An underline / underscore that runs along the following character
161 // "underline"
162 // 4. A box drawn around the following character
163 // "hollow"
164 //
165 // Default: not set, defaults to "bar"
166 "cursor_shape": null,
167 // Determines when the mouse cursor should be hidden in an editor or input box.
168 "hide_mouse": "on_typing_and_movement",
169 // How to highlight the current line in the editor.
170 //
171 // 1. Don't highlight the current line:
172 // "none"
173 // 2. Highlight the gutter area:
174 // "gutter"
175 // 3. Highlight the editor area:
176 // "line"
177 // 4. Highlight the full line (default):
178 // "all"
179 "current_line_highlight": "all",
180 // Whether to highlight all occurrences of the selected text in an editor.
181 "selection_highlight": true,
182 // The debounce delay before querying highlights based on the selected text.
183 "selection_highlight_debounce": 50,
184 // The debounce delay before querying highlights from the language
185 // server based on the current cursor location.
186 "lsp_highlight_debounce": 75,
187 // Whether to pop the completions menu while typing in an editor without
188 // explicitly requesting it.
189 "show_completions_on_input": true,
190 // Whether to display inline and alongside documentation for items in the
191 // completions menu
192 "show_completion_documentation": true,
193 // Show method signatures in the editor, when inside parentheses.
194 "auto_signature_help": false,
195 // Whether to show the signature help after completion or a bracket pair inserted.
196 // If `auto_signature_help` is enabled, this setting will be treated as enabled also.
197 "show_signature_help_after_edits": false,
198 // What to do when go to definition yields no results.
199 //
200 // 1. Do nothing: `none`
201 // 2. Find references for the same symbol: `find_all_references` (default)
202 "go_to_definition_fallback": "find_all_references",
203 // Whether to show wrap guides (vertical rulers) in the editor.
204 // Setting this to true will show a guide at the 'preferred_line_length' value
205 // if 'soft_wrap' is set to 'preferred_line_length', and will show any
206 // additional guides as specified by the 'wrap_guides' setting.
207 "show_wrap_guides": true,
208 // Character counts at which to show wrap guides in the editor.
209 "wrap_guides": [],
210 // Hide the values of in variables from visual display in private files
211 "redact_private_values": false,
212 // The default number of lines to expand excerpts in the multibuffer by.
213 "expand_excerpt_lines": 3,
214 // Globs to match against file paths to determine if a file is private.
215 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
216 // Whether to use additional LSP queries to format (and amend) the code after
217 // every "trigger" symbol input, defined by LSP server capabilities.
218 "use_on_type_format": true,
219 // Whether to automatically add matching closing characters when typing
220 // opening parenthesis, bracket, brace, single or double quote characters.
221 // For example, when you type (, Zed will add a closing ) at the correct position.
222 "use_autoclose": true,
223 // Whether to automatically surround selected text when typing opening parenthesis,
224 // bracket, brace, single or double quote characters.
225 // For example, when you select text and type (, Zed will surround the text with ().
226 "use_auto_surround": true,
227 // Whether indentation of pasted content should be adjusted based on the context.
228 "auto_indent_on_paste": true,
229 // Controls how the editor handles the autoclosed characters.
230 // When set to `false`(default), skipping over and auto-removing of the closing characters
231 // happen only for auto-inserted characters.
232 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
233 // no matter how they were inserted.
234 "always_treat_brackets_as_autoclosed": false,
235 // Controls where the `editor::Rewrap` action is allowed in the current language scope.
236 //
237 // This setting can take three values:
238 //
239 // 1. Only allow rewrapping in comments:
240 // "in_comments"
241 // 2. Only allow rewrapping in the current selection(s):
242 // "in_selections"
243 // 3. Allow rewrapping anywhere:
244 // "anywhere"
245 //
246 // When using values other than `in_comments`, it is possible for the rewrapping to produce code
247 // that is syntactically invalid. Keep this in mind when selecting which behavior you would like
248 // to use.
249 //
250 // Note: This setting has no effect in Vim mode, as rewrap is already allowed everywhere.
251 "allow_rewrap": "in_comments",
252 // Controls whether edit predictions are shown immediately (true)
253 // or manually by triggering `editor::ShowEditPrediction` (false).
254 "show_edit_predictions": true,
255 // Controls whether edit predictions are shown in a given language scope.
256 // Example: ["string", "comment"]
257 "edit_predictions_disabled_in": [],
258 // Whether to show tabs and spaces in the editor.
259 // This setting can take four values:
260 //
261 // 1. Draw tabs and spaces only for the selected text (default):
262 // "selection"
263 // 2. Do not draw any tabs or spaces:
264 // "none"
265 // 3. Draw all invisible symbols:
266 // "all"
267 // 4. Draw whitespaces at boundaries only:
268 // "boundary"
269 // For a whitespace to be on a boundary, any of the following conditions need to be met:
270 // - It is a tab
271 // - It is adjacent to an edge (start or end)
272 // - It is adjacent to a whitespace (left or right)
273 "show_whitespaces": "selection",
274 // Settings related to calls in Zed
275 "calls": {
276 // Join calls with the microphone live by default
277 "mute_on_join": false,
278 // Share your project when you are the first to join a channel
279 "share_on_join": false
280 },
281 // Toolbar related settings
282 "toolbar": {
283 // Whether to show breadcrumbs.
284 "breadcrumbs": true,
285 // Whether to show quick action buttons.
286 "quick_actions": true,
287 // Whether to show the Selections menu in the editor toolbar
288 "selections_menu": true
289 },
290 // Scrollbar related settings
291 "scrollbar": {
292 // When to show the scrollbar in the editor.
293 // This setting can take four values:
294 //
295 // 1. Show the scrollbar if there's important information or
296 // follow the system's configured behavior (default):
297 // "auto"
298 // 2. Match the system's configured behavior:
299 // "system"
300 // 3. Always show the scrollbar:
301 // "always"
302 // 4. Never show the scrollbar:
303 // "never"
304 "show": "auto",
305 // Whether to show cursor positions in the scrollbar.
306 "cursors": true,
307 // Whether to show git diff indicators in the scrollbar.
308 "git_diff": true,
309 // Whether to show buffer search results in the scrollbar.
310 "search_results": true,
311 // Whether to show selected text occurrences in the scrollbar.
312 "selected_text": true,
313 // Whether to show selected symbol occurrences in the scrollbar.
314 "selected_symbol": true,
315 // Which diagnostic indicators to show in the scrollbar:
316 // - "none" or false: do not show diagnostics
317 // - "error": show only errors
318 // - "warning": show only errors and warnings
319 // - "information": show only errors, warnings, and information
320 // - "all" or true: show all diagnostics
321 "diagnostics": "all",
322 // Forcefully enable or disable the scrollbar for each axis
323 "axes": {
324 // When false, forcefully disables the horizontal scrollbar. Otherwise, obey other settings.
325 "horizontal": true,
326 // When false, forcefully disables the vertical scrollbar. Otherwise, obey other settings.
327 "vertical": true
328 }
329 },
330 // Enable middle-click paste on Linux.
331 "middle_click_paste": true,
332 // What to do when multibuffer is double clicked in some of its excerpts
333 // (parts of singleton buffers).
334 // May take 2 values:
335 // 1. Behave as a regular buffer and select the whole word (default).
336 // "double_click_in_multibuffer": "select"
337 // 2. Open the excerpt clicked as a new buffer in the new tab.
338 // "double_click_in_multibuffer": "open",
339 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
340 "double_click_in_multibuffer": "select",
341 "gutter": {
342 // Whether to show line numbers in the gutter.
343 "line_numbers": true,
344 // Whether to show code action buttons in the gutter.
345 "code_actions": true,
346 // Whether to show runnables buttons in the gutter.
347 "runnables": true,
348 // Whether to show breakpoints in the gutter.
349 "breakpoints": true,
350 // Whether to show fold buttons in the gutter.
351 "folds": true
352 },
353 "indent_guides": {
354 // Whether to show indent guides in the editor.
355 "enabled": true,
356 // The width of the indent guides in pixels, between 1 and 10.
357 "line_width": 1,
358 // The width of the active indent guide in pixels, between 1 and 10.
359 "active_line_width": 1,
360 // Determines how indent guides are colored.
361 // This setting can take the following three values:
362 //
363 // 1. "disabled"
364 // 2. "fixed"
365 // 3. "indent_aware"
366 "coloring": "fixed",
367 // Determines how indent guide backgrounds are colored.
368 // This setting can take the following two values:
369 //
370 // 1. "disabled"
371 // 2. "indent_aware"
372 "background_coloring": "disabled"
373 },
374 // Whether the editor will scroll beyond the last line.
375 "scroll_beyond_last_line": "one_page",
376 // The number of lines to keep above/below the cursor when scrolling.
377 "vertical_scroll_margin": 3,
378 // Whether to scroll when clicking near the edge of the visible text area.
379 "autoscroll_on_clicks": false,
380 // The number of characters to keep on either side when scrolling with the mouse
381 "horizontal_scroll_margin": 5,
382 // Scroll sensitivity multiplier. This multiplier is applied
383 // to both the horizontal and vertical delta values while scrolling.
384 "scroll_sensitivity": 1.0,
385 "relative_line_numbers": false,
386 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
387 "search_wrap": true,
388 // Search options to enable by default when opening new project and buffer searches.
389 "search": {
390 "whole_word": false,
391 "case_sensitive": false,
392 "include_ignored": false,
393 "regex": false
394 },
395 // When to populate a new search's query based on the text under the cursor.
396 // This setting can take the following three values:
397 //
398 // 1. Always populate the search query with the word under the cursor (default).
399 // "always"
400 // 2. Only populate the search query when there is text selected
401 // "selection"
402 // 3. Never populate the search query
403 // "never"
404 "seed_search_query_from_cursor": "always",
405 // When enabled, automatically adjusts search case sensitivity based on your query.
406 // If your search query contains any uppercase letters, the search becomes case-sensitive;
407 // if it contains only lowercase letters, the search becomes case-insensitive.
408 "use_smartcase_search": false,
409 // Inlay hint related settings
410 "inlay_hints": {
411 // Global switch to toggle hints on and off, switched off by default.
412 "enabled": false,
413 // Toggle certain types of hints on and off, all switched on by default.
414 "show_type_hints": true,
415 "show_parameter_hints": true,
416 // Corresponds to null/None LSP hint type value.
417 "show_other_hints": true,
418 // Whether to show a background for inlay hints.
419 //
420 // If set to `true`, the background will use the `hint.background` color from the current theme.
421 "show_background": false,
422 // Time to wait after editing the buffer, before requesting the hints,
423 // set to 0 to disable debouncing.
424 "edit_debounce_ms": 700,
425 // Time to wait after scrolling the buffer, before requesting the hints,
426 // set to 0 to disable debouncing.
427 "scroll_debounce_ms": 50,
428 // A set of modifiers which, when pressed, will toggle the visibility of inlay hints.
429 // If the set if empty or not all the modifiers specified are pressed, inlay hints will not be toggled.
430 "toggle_on_modifiers_press": {
431 "control": false,
432 "shift": false,
433 "alt": false,
434 "platform": false,
435 "function": false
436 }
437 },
438 "project_panel": {
439 // Whether to show the project panel button in the status bar
440 "button": true,
441 // Whether to hide the gitignore entries in the project panel.
442 "hide_gitignore": false,
443 // Default width of the project panel.
444 "default_width": 240,
445 // Where to dock the project panel. Can be 'left' or 'right'.
446 "dock": "left",
447 // Spacing between worktree entries in the project panel. Can be 'comfortable' or 'standard'.
448 "entry_spacing": "comfortable",
449 // Whether to show file icons in the project panel.
450 "file_icons": true,
451 // Whether to show folder icons or chevrons for directories in the project panel.
452 "folder_icons": true,
453 // Whether to show the git status in the project panel.
454 "git_status": true,
455 // Amount of indentation for nested items.
456 "indent_size": 20,
457 // Whether to reveal it in the project panel automatically,
458 // when a corresponding project entry becomes active.
459 // Gitignored entries are never auto revealed.
460 "auto_reveal_entries": true,
461 // Whether to fold directories automatically and show compact folders
462 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
463 "auto_fold_dirs": true,
464 // Scrollbar-related settings
465 "scrollbar": {
466 // When to show the scrollbar in the project panel.
467 // This setting can take five values:
468 //
469 // 1. null (default): Inherit editor settings
470 // 2. Show the scrollbar if there's important information or
471 // follow the system's configured behavior (default):
472 // "auto"
473 // 3. Match the system's configured behavior:
474 // "system"
475 // 4. Always show the scrollbar:
476 // "always"
477 // 5. Never show the scrollbar:
478 // "never"
479 "show": null
480 },
481 // Which files containing diagnostic errors/warnings to mark in the project panel.
482 // This setting can take the following three values:
483 //
484 // 1. Do not mark any files:
485 // "off"
486 // 2. Only mark files with errors:
487 // "errors"
488 // 3. Mark files with errors and warnings:
489 // "all"
490 "show_diagnostics": "all",
491 // Settings related to indent guides in the project panel.
492 "indent_guides": {
493 // When to show indent guides in the project panel.
494 // This setting can take two values:
495 //
496 // 1. Always show indent guides:
497 // "always"
498 // 2. Never show indent guides:
499 // "never"
500 "show": "always"
501 }
502 },
503 "outline_panel": {
504 // Whether to show the outline panel button in the status bar
505 "button": true,
506 // Default width of the outline panel.
507 "default_width": 300,
508 // Where to dock the outline panel. Can be 'left' or 'right'.
509 "dock": "left",
510 // Whether to show file icons in the outline panel.
511 "file_icons": true,
512 // Whether to show folder icons or chevrons for directories in the outline panel.
513 "folder_icons": true,
514 // Whether to show the git status in the outline panel.
515 "git_status": true,
516 // Amount of indentation for nested items.
517 "indent_size": 20,
518 // Whether to reveal it in the outline panel automatically,
519 // when a corresponding outline entry becomes active.
520 // Gitignored entries are never auto revealed.
521 "auto_reveal_entries": true,
522 // Whether to fold directories automatically
523 // when a directory has only one directory inside.
524 "auto_fold_dirs": true,
525 // Settings related to indent guides in the outline panel.
526 "indent_guides": {
527 // When to show indent guides in the outline panel.
528 // This setting can take two values:
529 //
530 // 1. Always show indent guides:
531 // "always"
532 // 2. Never show indent guides:
533 // "never"
534 "show": "always"
535 },
536 // Scrollbar-related settings
537 "scrollbar": {
538 // When to show the scrollbar in the project panel.
539 // This setting can take five values:
540 //
541 // 1. null (default): Inherit editor settings
542 // 2. Show the scrollbar if there's important information or
543 // follow the system's configured behavior (default):
544 // "auto"
545 // 3. Match the system's configured behavior:
546 // "system"
547 // 4. Always show the scrollbar:
548 // "always"
549 // 5. Never show the scrollbar:
550 // "never"
551 "show": null
552 }
553 },
554 "collaboration_panel": {
555 // Whether to show the collaboration panel button in the status bar.
556 "button": true,
557 // Where to dock the collaboration panel. Can be 'left' or 'right'.
558 "dock": "left",
559 // Default width of the collaboration panel.
560 "default_width": 240
561 },
562 "chat_panel": {
563 // When to show the chat panel button in the status bar.
564 // Can be 'never', 'always', or 'when_in_call',
565 // or a boolean (interpreted as 'never'/'always').
566 "button": "when_in_call",
567 // Where to the chat panel. Can be 'left' or 'right'.
568 "dock": "right",
569 // Default width of the chat panel.
570 "default_width": 240
571 },
572 "git_panel": {
573 // Whether to show the git panel button in the status bar.
574 "button": true,
575 // Where to show the git panel. Can be 'left' or 'right'.
576 "dock": "left",
577 // Default width of the git panel.
578 "default_width": 360,
579 // Style of the git status indicator in the panel.
580 //
581 // Default: icon
582 "status_style": "icon",
583 // What branch name to use if init.defaultBranch
584 // is not set
585 //
586 // Default: main
587 "fallback_branch_name": "main",
588
589 "scrollbar": {
590 // When to show the scrollbar in the git panel.
591 //
592 // Default: inherits editor scrollbar settings
593 "show": null
594 }
595 },
596 "message_editor": {
597 // Whether to automatically replace emoji shortcodes with emoji characters.
598 // For example: typing `:wave:` gets replaced with `👋`.
599 "auto_replace_emoji_shortcode": true
600 },
601 "notification_panel": {
602 // Whether to show the notification panel button in the status bar.
603 "button": true,
604 // Where to dock the notification panel. Can be 'left' or 'right'.
605 "dock": "right",
606 // Default width of the notification panel.
607 "default_width": 380
608 },
609 "assistant": {
610 // Version of this setting.
611 "version": "2",
612 // Whether the assistant is enabled.
613 "enabled": true,
614 // Whether to show the assistant panel button in the status bar.
615 "button": true,
616 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
617 "dock": "right",
618 // Default width when the assistant is docked to the left or right.
619 "default_width": 640,
620 // Default height when the assistant is docked to the bottom.
621 "default_height": 320,
622 // The default model to use when creating new chats.
623 "default_model": {
624 // The provider to use.
625 "provider": "zed.dev",
626 // The model to use.
627 "model": "claude-3-5-sonnet-latest"
628 },
629 // The model to use when applying edits from the assistant.
630 "editor_model": {
631 // The provider to use.
632 "provider": "zed.dev",
633 // The model to use.
634 "model": "claude-3-5-sonnet-latest"
635 },
636 // When enabled, the agent can run potentially destructive actions without asking for your confirmation.
637 "always_allow_tool_actions": false,
638 "default_profile": "write",
639 "profiles": {
640 "ask": {
641 "name": "Ask",
642 // We don't know which of the context server tools are safe for the "Ask" profile, so we don't enable them by default.
643 // "enable_all_context_servers": true,
644 "tools": {
645 "diagnostics": true,
646 "fetch": true,
647 "list_directory": false,
648 "now": true,
649 "path_search": true,
650 "read_file": true,
651 "regex_search": true,
652 "thinking": true
653 }
654 },
655 "write": {
656 "name": "Write",
657 "enable_all_context_servers": true,
658 "tools": {
659 "terminal": true,
660 "batch_tool": true,
661 "code_actions": true,
662 "code_symbols": true,
663 "copy_path": false,
664 "create_file": true,
665 "delete_path": false,
666 "diagnostics": true,
667 "find_replace_file": true,
668 "fetch": true,
669 "list_directory": false,
670 "move_path": false,
671 "now": true,
672 "path_search": true,
673 "read_file": true,
674 "regex_search": true,
675 "rename": true,
676 "symbol_info": true,
677 "thinking": true
678 }
679 }
680 },
681 // Where to show notifications when an agent has either completed
682 // its response, or else needs confirmation before it can run a
683 // tool action.
684 // "primary_screen" - Show the notification only on your primary screen (default)
685 // "all_screens" - Show these notifications on all screens
686 // "never" - Never show these notifications
687 "notify_when_agent_waiting": "primary_screen"
688 },
689 // The settings for slash commands.
690 "slash_commands": {
691 // Settings for the `/docs` slash command.
692 "docs": {
693 // Whether `/docs` is enabled.
694 "enabled": false
695 },
696 // Settings for the `/project` slash command.
697 "project": {
698 // Whether `/project` is enabled.
699 "enabled": false
700 }
701 },
702 // Whether the screen sharing icon is shown in the os status bar.
703 "show_call_status_icon": true,
704 // Whether to use language servers to provide code intelligence.
705 "enable_language_server": true,
706 // Whether to perform linked edits of associated ranges, if the language server supports it.
707 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
708 "linked_edits": true,
709 // The list of language servers to use (or disable) for all languages.
710 //
711 // This is typically customized on a per-language basis.
712 "language_servers": ["..."],
713 // When to automatically save edited buffers. This setting can
714 // take four values.
715 //
716 // 1. Never automatically save:
717 // "autosave": "off",
718 // 2. Save when changing focus away from the Zed window:
719 // "autosave": "on_window_change",
720 // 3. Save when changing focus away from a specific buffer:
721 // "autosave": "on_focus_change",
722 // 4. Save when idle for a certain amount of time:
723 // "autosave": { "after_delay": {"milliseconds": 500} },
724 "autosave": "off",
725 // Maximum number of tabs per pane. Unset for unlimited.
726 "max_tabs": null,
727 // Settings related to the editor's tab bar.
728 "tab_bar": {
729 // Whether or not to show the tab bar in the editor
730 "show": true,
731 // Whether or not to show the navigation history buttons.
732 "show_nav_history_buttons": true,
733 // Whether or not to show the tab bar buttons.
734 "show_tab_bar_buttons": true
735 },
736 // Settings related to the editor's tabs
737 "tabs": {
738 // Show git status colors in the editor tabs.
739 "git_status": false,
740 // Position of the close button on the editor tabs.
741 // One of: ["right", "left", "hidden"]
742 "close_position": "right",
743 // Whether to show the file icon for a tab.
744 "file_icons": false,
745 // Controls the appearance behavior of the tab's close button.
746 //
747 // 1. Show it just upon hovering the tab. (default)
748 // "hover"
749 // 2. Show it persistently.
750 // "always"
751 // 3. Never show it, even if hovering it.
752 // "hidden"
753 "show_close_button": "hover",
754 // What to do after closing the current tab.
755 //
756 // 1. Activate the tab that was open previously (default)
757 // "history"
758 // 2. Activate the right neighbour tab if present
759 // "neighbour"
760 // 3. Activate the left neighbour tab if present
761 // "left_neighbour"
762 "activate_on_close": "history",
763 // Which files containing diagnostic errors/warnings to mark in the tabs.
764 // Diagnostics are only shown when file icons are also active.
765 // This setting only works when can take the following three values:
766 //
767 // 1. Do not mark any files:
768 // "off"
769 // 2. Only mark files with errors:
770 // "errors"
771 // 3. Mark files with errors and warnings:
772 // "all"
773 "show_diagnostics": "off"
774 },
775 // Settings related to preview tabs.
776 "preview_tabs": {
777 // Whether preview tabs should be enabled.
778 // Preview tabs allow you to open files in preview mode, where they close automatically
779 // when you switch to another file unless you explicitly pin them.
780 // This is useful for quickly viewing files without cluttering your workspace.
781 "enabled": true,
782 // Whether to open tabs in preview mode when selected from the file finder.
783 "enable_preview_from_file_finder": false,
784 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
785 "enable_preview_from_code_navigation": false
786 },
787 // Settings related to the file finder.
788 "file_finder": {
789 // Whether to show file icons in the file finder.
790 "file_icons": true,
791 // Determines how much space the file finder can take up in relation to the available window width.
792 // There are 5 possible width values:
793 //
794 // 1. Small: This value is essentially a fixed width.
795 // "modal_max_width": "small"
796 // 2. Medium:
797 // "modal_max_width": "medium"
798 // 3. Large:
799 // "modal_max_width": "large"
800 // 4. Extra Large:
801 // "modal_max_width": "xlarge"
802 // 5. Fullscreen: This value removes any horizontal padding, as it consumes the whole viewport width.
803 // "modal_max_width": "full"
804 //
805 // Default: small
806 "modal_max_width": "small"
807 },
808 // Whether or not to remove any trailing whitespace from lines of a buffer
809 // before saving it.
810 "remove_trailing_whitespace_on_save": true,
811 // Whether to start a new line with a comment when a previous line is a comment as well.
812 "extend_comment_on_newline": true,
813 // Removes any lines containing only whitespace at the end of the file and
814 // ensures just one newline at the end.
815 "ensure_final_newline_on_save": true,
816 // Whether or not to perform a buffer format before saving
817 //
818 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
819 "format_on_save": "on",
820 // How to perform a buffer format. This setting can take 4 values:
821 //
822 // 1. Format code using the current language server:
823 // "formatter": "language_server"
824 // 2. Format code using an external command:
825 // "formatter": {
826 // "external": {
827 // "command": "prettier",
828 // "arguments": ["--stdin-filepath", "{buffer_path}"]
829 // }
830 // }
831 // 3. Format code using Zed's Prettier integration:
832 // "formatter": "prettier"
833 // 4. Default. Format files using Zed's Prettier integration (if applicable),
834 // or falling back to formatting via language server:
835 // "formatter": "auto"
836 "formatter": "auto",
837 // How to soft-wrap long lines of text.
838 // Possible values:
839 //
840 // 1. Prefer a single line generally, unless an overly long line is encountered.
841 // "soft_wrap": "none",
842 // "soft_wrap": "prefer_line", // (deprecated, same as "none")
843 // 2. Soft wrap lines that overflow the editor.
844 // "soft_wrap": "editor_width",
845 // 3. Soft wrap lines at the preferred line length.
846 // "soft_wrap": "preferred_line_length",
847 // 4. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
848 // "soft_wrap": "bounded",
849 "soft_wrap": "none",
850 // The column at which to soft-wrap lines, for buffers where soft-wrap
851 // is enabled.
852 "preferred_line_length": 80,
853 // Whether to indent lines using tab characters, as opposed to multiple
854 // spaces.
855 "hard_tabs": false,
856 // How many columns a tab should occupy.
857 "tab_size": 4,
858 // Control what info is collected by Zed.
859 "telemetry": {
860 // Send debug info like crash reports.
861 "diagnostics": true,
862 // Send anonymized usage data like what languages you're using Zed with.
863 "metrics": true
864 },
865 // Automatically update Zed. This setting may be ignored on Linux if
866 // installed through a package manager.
867 "auto_update": true,
868 // Diagnostics configuration.
869 "diagnostics": {
870 // Whether to show warnings or not by default.
871 "include_warnings": true,
872 // Settings for inline diagnostics
873 "inline": {
874 // Whether to show diagnostics inline or not
875 "enabled": false,
876 // The delay in milliseconds to show inline diagnostics after the
877 // last diagnostic update.
878 "update_debounce_ms": 150,
879 // The amount of padding between the end of the source line and the start
880 // of the inline diagnostic in units of em widths.
881 "padding": 4,
882 // The minimum column to display inline diagnostics. This setting can be
883 // used to horizontally align inline diagnostics at some column. Lines
884 // longer than this value will still push diagnostics further to the right.
885 "min_column": 0,
886 // The minimum severity of the diagnostics to show inline.
887 // Shows all diagnostics when not specified.
888 "max_severity": null
889 }
890 },
891 // Files or globs of files that will be excluded by Zed entirely. They will be skipped during file
892 // scans, file searches, and not be displayed in the project file tree. Takes precedence over `file_scan_inclusions`.
893 "file_scan_exclusions": [
894 "**/.git",
895 "**/.svn",
896 "**/.hg",
897 "**/.jj",
898 "**/CVS",
899 "**/.DS_Store",
900 "**/Thumbs.db",
901 "**/.classpath",
902 "**/.settings"
903 ],
904 // Files or globs of files that will be included by Zed, even when ignored by git. This is useful
905 // for files that are not tracked by git, but are still important to your project. Note that globs
906 // that are overly broad can slow down Zed's file scanning. `file_scan_exclusions` takes
907 // precedence over these inclusions.
908 "file_scan_inclusions": [".env*"],
909 // Git gutter behavior configuration.
910 "git": {
911 // Control whether the git gutter is shown. May take 2 values:
912 // 1. Show the gutter
913 // "git_gutter": "tracked_files"
914 // 2. Hide the gutter
915 // "git_gutter": "hide"
916 "git_gutter": "tracked_files",
917 // Control whether the git blame information is shown inline,
918 // in the currently focused line.
919 "inline_blame": {
920 "enabled": true
921 // Sets a delay after which the inline blame information is shown.
922 // Delay is restarted with every cursor movement.
923 // "delay_ms": 600
924 //
925 // Whether or not to display the git commit summary on the same line.
926 // "show_commit_summary": false
927 //
928 // The minimum column number to show the inline blame information at
929 // "min_column": 0
930 },
931 // How git hunks are displayed visually in the editor.
932 // This setting can take two values:
933 //
934 // 1. Show unstaged hunks filled and staged hunks hollow:
935 // "hunk_style": "staged_hollow"
936 // 2. Show unstaged hunks hollow and staged hunks filled:
937 // "hunk_style": "unstaged_hollow"
938 "hunk_style": "staged_hollow"
939 },
940 // The list of custom Git hosting providers.
941 "git_hosting_providers": [
942 // {
943 // "provider": "github",
944 // "name": "BigCorp GitHub",
945 // "base_url": "https://code.big-corp.com"
946 // }
947 ],
948 // Configuration for how direnv configuration should be loaded. May take 2 values:
949 // 1. Load direnv configuration using `direnv export json` directly.
950 // "load_direnv": "direct"
951 // 2. Load direnv configuration through the shell hook, works for POSIX shells and fish.
952 // "load_direnv": "shell_hook"
953 "load_direnv": "direct",
954 "edit_predictions": {
955 // A list of globs representing files that edit predictions should be disabled for.
956 // There's a sensible default list of globs already included.
957 // Any addition to this list will be merged with the default list.
958 // Globs are matched relative to the worktree root,
959 // except when starting with a slash (/) or equivalent in Windows.
960 "disabled_globs": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/.dev.vars", "**/secrets.yml"],
961 // When to show edit predictions previews in buffer.
962 // This setting takes two possible values:
963 // 1. Display predictions inline when there are no language server completions available.
964 // "mode": "eager"
965 // 2. Display predictions inline only when holding a modifier key (alt by default).
966 // "mode": "subtle"
967 "mode": "eager",
968 // Whether edit predictions are enabled in the assistant panel.
969 // This setting has no effect if globally disabled.
970 "enabled_in_assistant": true
971 },
972 // Settings specific to journaling
973 "journal": {
974 // The path of the directory where journal entries are stored
975 "path": "~",
976 // What format to display the hours in
977 // May take 2 values:
978 // 1. hour12
979 // 2. hour24
980 "hour_format": "hour12"
981 },
982 // Settings specific to the terminal
983 "terminal": {
984 // What shell to use when opening a terminal. May take 3 values:
985 // 1. Use the system's default terminal configuration in /etc/passwd
986 // "shell": "system"
987 // 2. A program:
988 // "shell": {
989 // "program": "sh"
990 // }
991 // 3. A program with arguments:
992 // "shell": {
993 // "with_arguments": {
994 // "program": "/bin/bash",
995 // "args": ["--login"]
996 // }
997 // }
998 "shell": "system",
999 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
1000 "dock": "bottom",
1001 // Default width when the terminal is docked to the left or right.
1002 "default_width": 640,
1003 // Default height when the terminal is docked to the bottom.
1004 "default_height": 320,
1005 // What working directory to use when launching the terminal.
1006 // May take 4 values:
1007 // 1. Use the current file's project directory. Will Fallback to the
1008 // first project directory strategy if unsuccessful
1009 // "working_directory": "current_project_directory"
1010 // 2. Use the first project in this workspace's directory
1011 // "working_directory": "first_project_directory"
1012 // 3. Always use this platform's home directory (if we can find it)
1013 // "working_directory": "always_home"
1014 // 4. Always use a specific directory. This value will be shell expanded.
1015 // If this path is not a valid directory the terminal will default to
1016 // this platform's home directory (if we can find it)
1017 // "working_directory": {
1018 // "always": {
1019 // "directory": "~/zed/projects/"
1020 // }
1021 // }
1022 "working_directory": "current_project_directory",
1023 // Set the cursor blinking behavior in the terminal.
1024 // May take 3 values:
1025 // 1. Never blink the cursor, ignoring the terminal mode
1026 // "blinking": "off",
1027 // 2. Default the cursor blink to off, but allow the terminal to
1028 // set blinking
1029 // "blinking": "terminal_controlled",
1030 // 3. Always blink the cursor, ignoring the terminal mode
1031 // "blinking": "on",
1032 "blinking": "terminal_controlled",
1033 // Default cursor shape for the terminal.
1034 // 1. A block that surrounds the following character
1035 // "block"
1036 // 2. A vertical bar
1037 // "bar"
1038 // 3. An underline / underscore that runs along the following character
1039 // "underline"
1040 // 4. A box drawn around the following character
1041 // "hollow"
1042 //
1043 // Default: not set, defaults to "block"
1044 "cursor_shape": null,
1045 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
1046 // Alternate Scroll mode converts mouse scroll events into up / down key
1047 // presses when in the alternate screen (e.g. when running applications
1048 // like vim or less). The terminal can still set and unset this mode.
1049 // May take 2 values:
1050 // 1. Default alternate scroll mode to on
1051 // "alternate_scroll": "on",
1052 // 2. Default alternate scroll mode to off
1053 // "alternate_scroll": "off",
1054 "alternate_scroll": "on",
1055 // Set whether the option key behaves as the meta key.
1056 // May take 2 values:
1057 // 1. Rely on default platform handling of option key, on macOS
1058 // this means generating certain unicode characters
1059 // "option_as_meta": false,
1060 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
1061 // "option_as_meta": true,
1062 "option_as_meta": false,
1063 // Whether or not selecting text in the terminal will automatically
1064 // copy to the system clipboard.
1065 "copy_on_select": false,
1066 // Whether to show the terminal button in the status bar
1067 "button": true,
1068 // Any key-value pairs added to this list will be added to the terminal's
1069 // environment. Use `:` to separate multiple values.
1070 "env": {
1071 // "KEY": "value1:value2"
1072 },
1073 // Set the terminal's line height.
1074 // May take 3 values:
1075 // 1. Use a line height that's comfortable for reading, 1.618
1076 // "line_height": "comfortable"
1077 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
1078 // particularly if they use box characters
1079 // "line_height": "standard",
1080 // 3. Use a custom line height.
1081 // "line_height": {
1082 // "custom": 2
1083 // },
1084 "line_height": "comfortable",
1085 // Activate the python virtual environment, if one is found, in the
1086 // terminal's working directory (as resolved by the working_directory
1087 // setting). Set this to "off" to disable this behavior.
1088 "detect_venv": {
1089 "on": {
1090 // Default directories to search for virtual environments, relative
1091 // to the current working directory. We recommend overriding this
1092 // in your project's settings, rather than globally.
1093 "directories": [".env", "env", ".venv", "venv"],
1094 // Can also be `csh`, `fish`, `nushell` and `power_shell`
1095 "activate_script": "default"
1096 }
1097 },
1098 "toolbar": {
1099 // Whether to display the terminal title in its toolbar's breadcrumbs.
1100 // Only shown if the terminal title is not empty.
1101 //
1102 // The shell running in the terminal needs to be configured to emit the title.
1103 // Example: `echo -e "\e]2;New Title\007";`
1104 "breadcrumbs": true
1105 },
1106 // Scrollbar-related settings
1107 "scrollbar": {
1108 // When to show the scrollbar in the terminal.
1109 // This setting can take five values:
1110 //
1111 // 1. null (default): Inherit editor settings
1112 // 2. Show the scrollbar if there's important information or
1113 // follow the system's configured behavior (default):
1114 // "auto"
1115 // 3. Match the system's configured behavior:
1116 // "system"
1117 // 4. Always show the scrollbar:
1118 // "always"
1119 // 5. Never show the scrollbar:
1120 // "never"
1121 "show": null
1122 }
1123 // Set the terminal's font size. If this option is not included,
1124 // the terminal will default to matching the buffer's font size.
1125 // "font_size": 15,
1126 // Set the terminal's font family. If this option is not included,
1127 // the terminal will default to matching the buffer's font family.
1128 // "font_family": "Zed Plex Mono",
1129 // Set the terminal's font fallbacks. If this option is not included,
1130 // the terminal will default to matching the buffer's font fallbacks.
1131 // This will be merged with the platform's default font fallbacks
1132 // "font_fallbacks": ["FiraCode Nerd Fonts"],
1133 // Sets the maximum number of lines in the terminal's scrollback buffer.
1134 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
1135 // Existing terminals will not pick up this change until they are recreated.
1136 // "max_scroll_history_lines": 10000,
1137 },
1138 "code_actions_on_format": {},
1139 // Settings related to running tasks.
1140 "tasks": {
1141 "variables": {},
1142 "enabled": true
1143 },
1144 // An object whose keys are language names, and whose values
1145 // are arrays of filenames or extensions of files that should
1146 // use those languages.
1147 //
1148 // For example, to treat files like `foo.notjs` as JavaScript,
1149 // and `Embargo.lock` as TOML:
1150 //
1151 // {
1152 // "JavaScript": ["notjs"],
1153 // "TOML": ["Embargo.lock"]
1154 // }
1155 //
1156 "file_types": {
1157 "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "**/.vscode/**/*.json"],
1158 "Shell Script": [".env.*"]
1159 },
1160 // By default use a recent system version of node, or install our own.
1161 // You can override this to use a version of node that is not in $PATH with:
1162 // {
1163 // "node": {
1164 // "path": "/path/to/node"
1165 // "npm_path": "/path/to/npm" (defaults to node_path/../npm)
1166 // }
1167 // }
1168 // or to ensure Zed always downloads and installs an isolated version of node:
1169 // {
1170 // "node": {
1171 // "ignore_system_version": true,
1172 // }
1173 // NOTE: changing this setting currently requires restarting Zed.
1174 "node": {},
1175 // The extensions that Zed should automatically install on startup.
1176 //
1177 // If you don't want any of these extensions, add this field to your settings
1178 // and change the value to `false`.
1179 "auto_install_extensions": {
1180 "html": true
1181 },
1182 // Controls how completions are processed for this language.
1183 "completions": {
1184 // Controls how words are completed.
1185 // For large documents, not all words may be fetched for completion.
1186 //
1187 // May take 3 values:
1188 // 1. "enabled"
1189 // Always fetch document's words for completions along with LSP completions.
1190 // 2. "fallback"
1191 // Only if LSP response errors or times out, use document's words to show completions.
1192 // 3. "disabled"
1193 // Never fetch or complete document's words for completions.
1194 // (Word-based completions can still be queried via a separate action)
1195 //
1196 // Default: fallback
1197 "words": "fallback",
1198 // Whether to fetch LSP completions or not.
1199 //
1200 // Default: true
1201 "lsp": true,
1202 // When fetching LSP completions, determines how long to wait for a response of a particular server.
1203 // When set to 0, waits indefinitely.
1204 //
1205 // Default: 0
1206 "lsp_fetch_timeout_ms": 0,
1207 // Controls what range to replace when accepting LSP completions.
1208 //
1209 // When LSP servers give an `InsertReplaceEdit` completion, they provides two ranges: `insert` and `replace`. Usually, `insert`
1210 // contains the word prefix before your cursor and `replace` contains the whole word.
1211 //
1212 // Effectively, this setting just changes whether Zed will use the received range for `insert` or `replace`, so the results may
1213 // differ depending on the underlying LSP server.
1214 //
1215 // Possible values:
1216 // 1. "insert"
1217 // Replaces text before the cursor, using the `insert` range described in the LSP specification.
1218 // 2. "replace"
1219 // Replaces text before and after the cursor, using the `replace` range described in the LSP specification.
1220 // 3. "replace_subsequence"
1221 // Behaves like `"replace"` if the text that would be replaced is a subsequence of the completion text,
1222 // and like `"insert"` otherwise.
1223 // 4. "replace_suffix"
1224 // Behaves like `"replace"` if the text after the cursor is a suffix of the completion, and like
1225 // `"insert"` otherwise.
1226 "lsp_insert_mode": "replace_suffix"
1227 },
1228 // Different settings for specific languages.
1229 "languages": {
1230 "Astro": {
1231 "language_servers": ["astro-language-server", "..."],
1232 "prettier": {
1233 "allowed": true,
1234 "plugins": ["prettier-plugin-astro"]
1235 }
1236 },
1237 "Blade": {
1238 "prettier": {
1239 "allowed": true
1240 }
1241 },
1242 "C": {
1243 "format_on_save": "off",
1244 "use_on_type_format": false,
1245 "prettier": {
1246 "allowed": false
1247 }
1248 },
1249 "C++": {
1250 "format_on_save": "off",
1251 "use_on_type_format": false,
1252 "prettier": {
1253 "allowed": false
1254 }
1255 },
1256 "CSS": {
1257 "prettier": {
1258 "allowed": true
1259 }
1260 },
1261 "Dart": {
1262 "tab_size": 2
1263 },
1264 "Diff": {
1265 "show_edit_predictions": false,
1266 "remove_trailing_whitespace_on_save": false,
1267 "ensure_final_newline_on_save": false
1268 },
1269 "Elixir": {
1270 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1271 },
1272 "Erlang": {
1273 "language_servers": ["erlang-ls", "!elp", "..."]
1274 },
1275 "Git Commit": {
1276 "allow_rewrap": "anywhere"
1277 },
1278 "Go": {
1279 "code_actions_on_format": {
1280 "source.organizeImports": true
1281 }
1282 },
1283 "GraphQL": {
1284 "prettier": {
1285 "allowed": true
1286 }
1287 },
1288 "HEEX": {
1289 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1290 },
1291 "HTML": {
1292 "prettier": {
1293 "allowed": true
1294 }
1295 },
1296 "Java": {
1297 "prettier": {
1298 "allowed": true,
1299 "plugins": ["prettier-plugin-java"]
1300 }
1301 },
1302 "JavaScript": {
1303 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1304 "prettier": {
1305 "allowed": true
1306 }
1307 },
1308 "JSON": {
1309 "prettier": {
1310 "allowed": true
1311 }
1312 },
1313 "JSONC": {
1314 "prettier": {
1315 "allowed": true
1316 }
1317 },
1318 "LaTeX": {
1319 "format_on_save": "on",
1320 "formatter": "language_server",
1321 "language_servers": ["texlab", "..."],
1322 "prettier": {
1323 "allowed": false
1324 }
1325 },
1326 "Markdown": {
1327 "format_on_save": "off",
1328 "use_on_type_format": false,
1329 "allow_rewrap": "anywhere",
1330 "soft_wrap": "editor_width",
1331 "prettier": {
1332 "allowed": true
1333 }
1334 },
1335 "PHP": {
1336 "language_servers": ["phpactor", "!intelephense", "..."],
1337 "prettier": {
1338 "allowed": true,
1339 "plugins": ["@prettier/plugin-php"],
1340 "parser": "php"
1341 }
1342 },
1343 "Plain Text": {
1344 "allow_rewrap": "anywhere"
1345 },
1346 "Ruby": {
1347 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
1348 },
1349 "SCSS": {
1350 "prettier": {
1351 "allowed": true
1352 }
1353 },
1354 "SQL": {
1355 "prettier": {
1356 "allowed": true,
1357 "plugins": ["prettier-plugin-sql"]
1358 }
1359 },
1360 "Starlark": {
1361 "language_servers": ["starpls", "!buck2-lsp", "..."]
1362 },
1363 "Svelte": {
1364 "language_servers": ["svelte-language-server", "..."],
1365 "prettier": {
1366 "allowed": true,
1367 "plugins": ["prettier-plugin-svelte"]
1368 }
1369 },
1370 "TSX": {
1371 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1372 "prettier": {
1373 "allowed": true
1374 }
1375 },
1376 "Twig": {
1377 "prettier": {
1378 "allowed": true
1379 }
1380 },
1381 "TypeScript": {
1382 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1383 "prettier": {
1384 "allowed": true
1385 }
1386 },
1387 "Vue.js": {
1388 "language_servers": ["vue-language-server", "..."],
1389 "prettier": {
1390 "allowed": true
1391 }
1392 },
1393 "XML": {
1394 "prettier": {
1395 "allowed": true,
1396 "plugins": ["@prettier/plugin-xml"]
1397 }
1398 },
1399 "YAML": {
1400 "prettier": {
1401 "allowed": true
1402 }
1403 },
1404 "Zig": {
1405 "language_servers": ["zls", "..."]
1406 }
1407 },
1408 // Different settings for specific language models.
1409 "language_models": {
1410 "anthropic": {
1411 "version": "1",
1412 "api_url": "https://api.anthropic.com"
1413 },
1414 "google": {
1415 "api_url": "https://generativelanguage.googleapis.com"
1416 },
1417 "ollama": {
1418 "api_url": "http://localhost:11434"
1419 },
1420 "openai": {
1421 "version": "1",
1422 "api_url": "https://api.openai.com/v1"
1423 },
1424 "lmstudio": {
1425 "api_url": "http://localhost:1234/api/v0"
1426 },
1427 "deepseek": {
1428 "api_url": "https://api.deepseek.com"
1429 },
1430 "mistral": {
1431 "api_url": "https://api.mistral.ai/v1"
1432 }
1433 },
1434 // Zed's Prettier integration settings.
1435 // Allows to enable/disable formatting with Prettier
1436 // and configure default Prettier, used when no project-level Prettier installation is found.
1437 "prettier": {
1438 // // Whether to consider prettier formatter or not when attempting to format a file.
1439 // "allowed": false,
1440 //
1441 // // Use regular Prettier json configuration.
1442 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1443 // // the project has no other Prettier installed.
1444 // "plugins": [],
1445 //
1446 // // Use regular Prettier json configuration.
1447 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1448 // // the project has no other Prettier installed.
1449 // "trailingComma": "es5",
1450 // "tabWidth": 4,
1451 // "semi": false,
1452 // "singleQuote": true
1453 },
1454 // Settings for auto-closing of JSX tags.
1455 "jsx_tag_auto_close": {
1456 "enabled": true
1457 },
1458 // LSP Specific settings.
1459 "lsp": {
1460 // Specify the LSP name as a key here.
1461 // "rust-analyzer": {
1462 // // A special flag for rust-analyzer integration, to use server-provided tasks
1463 // enable_lsp_tasks": true,
1464 // // These initialization options are merged into Zed's defaults
1465 // "initialization_options": {
1466 // "check": {
1467 // "command": "clippy" // rust-analyzer.check.command (default: "check")
1468 // }
1469 // }
1470 // }
1471 },
1472 // Jupyter settings
1473 "jupyter": {
1474 "enabled": true
1475 // Specify the language name as the key and the kernel name as the value.
1476 // "kernel_selections": {
1477 // "python": "conda-base"
1478 // "typescript": "deno"
1479 // }
1480 },
1481 // Vim settings
1482 "vim": {
1483 "default_mode": "normal",
1484 "toggle_relative_line_numbers": false,
1485 "use_system_clipboard": "always",
1486 "use_multiline_find": false,
1487 "use_smartcase_find": false,
1488 "highlight_on_yank_duration": 200,
1489 "custom_digraphs": {}
1490 },
1491 // The server to connect to. If the environment variable
1492 // ZED_SERVER_URL is set, it will override this setting.
1493 "server_url": "https://zed.dev",
1494 // Settings overrides to use when using Zed Preview.
1495 // Mostly useful for developers who are managing multiple instances of Zed.
1496 "preview": {
1497 // "theme": "Andromeda"
1498 },
1499 // Settings overrides to use when using Zed Nightly.
1500 // Mostly useful for developers who are managing multiple instances of Zed.
1501 "nightly": {
1502 // "theme": "Andromeda"
1503 },
1504 // Settings overrides to use when using Zed Stable.
1505 // Mostly useful for developers who are managing multiple instances of Zed.
1506 "stable": {
1507 // "theme": "Andromeda"
1508 },
1509 // Settings overrides to use when using Zed Dev.
1510 // Mostly useful for developers who are managing multiple instances of Zed.
1511 "dev": {
1512 // "theme": "Andromeda"
1513 },
1514 // Whether to show full labels in line indicator or short ones
1515 //
1516 // Values:
1517 // - `short`: "2 s, 15 l, 32 c"
1518 // - `long`: "2 selections, 15 lines, 32 characters"
1519 // Default: long
1520 "line_indicator_format": "long",
1521 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1522 //
1523 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1524 // `socks5h`. `http` will be used when no scheme is specified.
1525 //
1526 // By default no proxy will be used, or Zed will try get proxy settings from
1527 // environment variables.
1528 //
1529 // Examples:
1530 // - "proxy": "socks5h://localhost:10808"
1531 // - "proxy": "http://127.0.0.1:10809"
1532 "proxy": null,
1533 // Set to configure aliases for the command palette.
1534 // When typing a query which is a key of this object, the value will be used instead.
1535 //
1536 // Examples:
1537 // {
1538 // "W": "workspace::Save"
1539 // }
1540 "command_aliases": {},
1541 // Whether to show user picture in titlebar.
1542 "show_user_picture": true,
1543 // ssh_connections is an array of ssh connections.
1544 // You can configure these from `project: Open Remote` in the command palette.
1545 // Zed's ssh support will pull configuration from your ~/.ssh too.
1546 // Examples:
1547 // [
1548 // {
1549 // "host": "example-box",
1550 // // "port": 22, "username": "test", "args": ["-i", "/home/user/.ssh/id_rsa"]
1551 // "projects": [
1552 // {
1553 // "paths": ["/home/user/code/zed"]
1554 // }
1555 // ]
1556 // }
1557 // ]
1558 "ssh_connections": [],
1559
1560 // Configures context servers for use in the Assistant.
1561 "context_servers": {},
1562 "debugger": {
1563 "stepping_granularity": "line",
1564 "save_breakpoints": true,
1565 "button": true
1566 }
1567}