1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 "icon_theme": "Zed (Default)",
14 // The name of a base set of key bindings to use.
15 // This setting can take six values, each named after another
16 // text editor:
17 //
18 // 1. "VSCode"
19 // 2. "Atom"
20 // 3. "JetBrains"
21 // 4. "None"
22 // 5. "SublimeText"
23 // 6. "TextMate"
24 "base_keymap": "VSCode",
25 // Features that can be globally enabled or disabled
26 "features": {
27 // Which edit prediction provider to use.
28 "edit_prediction_provider": "copilot"
29 },
30 // The name of a font to use for rendering text in the editor
31 "buffer_font_family": "Zed Plex Mono",
32 // Set the buffer text's font fallbacks, this will be merged with
33 // the platform's default fallbacks.
34 "buffer_font_fallbacks": null,
35 // The OpenType features to enable for text in the editor.
36 "buffer_font_features": {
37 // Disable ligatures:
38 // "calt": false
39 },
40 // The default font size for text in the editor
41 "buffer_font_size": 15,
42 // The weight of the editor font in standard CSS units from 100 to 900.
43 "buffer_font_weight": 400,
44 // Set the buffer's line height.
45 // May take 3 values:
46 // 1. Use a line height that's comfortable for reading (1.618)
47 // "buffer_line_height": "comfortable"
48 // 2. Use a standard line height, (1.3)
49 // "buffer_line_height": "standard",
50 // 3. Use a custom line height
51 // "buffer_line_height": {
52 // "custom": 2
53 // },
54 "buffer_line_height": "comfortable",
55 // The name of a font to use for rendering text in the UI
56 // You can set this to ".SystemUIFont" to use the system font
57 "ui_font_family": "Zed Plex Sans",
58 // Set the UI's font fallbacks, this will be merged with the platform's
59 // default font fallbacks.
60 "ui_font_fallbacks": null,
61 // The OpenType features to enable for text in the UI
62 "ui_font_features": {
63 // Disable ligatures:
64 "calt": false
65 },
66 // The weight of the UI font in standard CSS units from 100 to 900.
67 "ui_font_weight": 400,
68 // The default font size for text in the UI
69 "ui_font_size": 16,
70 // How much to fade out unused code.
71 "unnecessary_code_fade": 0.3,
72 // Active pane styling settings.
73 "active_pane_modifiers": {
74 // The factor to grow the active pane by. Defaults to 1.0
75 // which gives the same size as all other panes.
76 "magnification": 1.0,
77 // Inset border size of the active pane, in pixels.
78 "border_size": 0.0,
79 // Opacity of the inactive panes. 0 means transparent, 1 means opaque.
80 // Values are clamped to the [0.0, 1.0] range.
81 "inactive_opacity": 1.0
82 },
83 // The direction that you want to split panes horizontally. Defaults to "up"
84 "pane_split_direction_horizontal": "up",
85 // The direction that you want to split panes horizontally. Defaults to "left"
86 "pane_split_direction_vertical": "left",
87 // Centered layout related settings.
88 "centered_layout": {
89 // The relative width of the left padding of the central pane from the
90 // workspace when the centered layout is used.
91 "left_padding": 0.2,
92 // The relative width of the right padding of the central pane from the
93 // workspace when the centered layout is used.
94 "right_padding": 0.2
95 },
96 // All settings related to the image viewer.
97 "image_viewer": {
98 // The unit for image file sizes.
99 // By default we're setting it to binary.
100 // The second option is decimal.
101 "unit": "binary"
102 },
103 // The key to use for adding multiple cursors
104 // Currently "alt" or "cmd_or_ctrl" (also aliased as
105 // "cmd" and "ctrl") are supported.
106 "multi_cursor_modifier": "alt",
107 // Whether to enable vim modes and key bindings.
108 "vim_mode": false,
109 // Whether to show the informational hover box when moving the mouse
110 // over symbols in the editor.
111 "hover_popover_enabled": true,
112 // Time to wait before showing the informational hover box
113 "hover_popover_delay": 350,
114 // Whether to confirm before quitting Zed.
115 "confirm_quit": false,
116 // Whether to restore last closed project when fresh Zed instance is opened.
117 "restore_on_startup": "last_session",
118 // Size of the drop target in the editor.
119 "drop_target_size": 0.2,
120 // Whether the window should be closed when using 'close active item' on a window with no tabs.
121 // May take 3 values:
122 // 1. Use the current platform's convention
123 // "when_closing_with_no_tabs": "platform_default"
124 // 2. Always close the window:
125 // "when_closing_with_no_tabs": "close_window",
126 // 3. Never close the window
127 // "when_closing_with_no_tabs": "keep_window_open",
128 "when_closing_with_no_tabs": "platform_default",
129 // What to do when the last window is closed.
130 // May take 2 values:
131 // 1. Use the current platform's convention
132 // "on_last_window_closed": "platform_default"
133 // 2. Always quit the application
134 // "on_last_window_closed": "quit_app",
135 "on_last_window_closed": "platform_default",
136 // Whether to use the system provided dialogs for Open and Save As.
137 // When set to false, Zed will use the built-in keyboard-first pickers.
138 "use_system_path_prompts": true,
139 // Whether the cursor blinks in the editor.
140 "cursor_blink": true,
141 // Cursor shape for the default editor.
142 // 1. A vertical bar
143 // "bar"
144 // 2. A block that surrounds the following character
145 // "block"
146 // 3. An underline / underscore that runs along the following character
147 // "underline"
148 // 4. A box drawn around the following character
149 // "hollow"
150 //
151 // Default: not set, defaults to "bar"
152 "cursor_shape": null,
153 // How to highlight the current line in the editor.
154 //
155 // 1. Don't highlight the current line:
156 // "none"
157 // 2. Highlight the gutter area:
158 // "gutter"
159 // 3. Highlight the editor area:
160 // "line"
161 // 4. Highlight the full line (default):
162 // "all"
163 "current_line_highlight": "all",
164 // Whether to highlight all occurrences of the selected text in an editor.
165 "selection_highlight": true,
166 // The debounce delay before querying highlights based on the selected text.
167 "selection_highlight_debounce": 50,
168 // The debounce delay before querying highlights from the language
169 // server based on the current cursor location.
170 "lsp_highlight_debounce": 75,
171 // Whether to pop the completions menu while typing in an editor without
172 // explicitly requesting it.
173 "show_completions_on_input": true,
174 // Whether to display inline and alongside documentation for items in the
175 // completions menu
176 "show_completion_documentation": true,
177 // Show method signatures in the editor, when inside parentheses.
178 "auto_signature_help": false,
179 // Whether to show the signature help after completion or a bracket pair inserted.
180 // If `auto_signature_help` is enabled, this setting will be treated as enabled also.
181 "show_signature_help_after_edits": false,
182 // Whether to show wrap guides (vertical rulers) in the editor.
183 // Setting this to true will show a guide at the 'preferred_line_length' value
184 // if 'soft_wrap' is set to 'preferred_line_length', and will show any
185 // additional guides as specified by the 'wrap_guides' setting.
186 "show_wrap_guides": true,
187 // Character counts at which to show wrap guides in the editor.
188 "wrap_guides": [],
189 // Hide the values of in variables from visual display in private files
190 "redact_private_values": false,
191 // The default number of lines to expand excerpts in the multibuffer by.
192 "expand_excerpt_lines": 3,
193 // Globs to match against file paths to determine if a file is private.
194 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
195 // Whether to use additional LSP queries to format (and amend) the code after
196 // every "trigger" symbol input, defined by LSP server capabilities.
197 "use_on_type_format": true,
198 // Whether to automatically add matching closing characters when typing
199 // opening parenthesis, bracket, brace, single or double quote characters.
200 // For example, when you type (, Zed will add a closing ) at the correct position.
201 "use_autoclose": true,
202 // Whether to automatically surround selected text when typing opening parenthesis,
203 // bracket, brace, single or double quote characters.
204 // For example, when you select text and type (, Zed will surround the text with ().
205 "use_auto_surround": true,
206 // Whether indentation of pasted content should be adjusted based on the context.
207 "auto_indent_on_paste": true,
208 // Controls how the editor handles the autoclosed characters.
209 // When set to `false`(default), skipping over and auto-removing of the closing characters
210 // happen only for auto-inserted characters.
211 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
212 // no matter how they were inserted.
213 "always_treat_brackets_as_autoclosed": false,
214 // Controls where the `editor::Rewrap` action is allowed in the current language scope.
215 //
216 // This setting can take three values:
217 //
218 // 1. Only allow rewrapping in comments:
219 // "in_comments"
220 // 2. Only allow rewrapping in the current selection(s):
221 // "in_selections"
222 // 3. Allow rewrapping anywhere:
223 // "anywhere"
224 //
225 // When using values other than `in_comments`, it is possible for the rewrapping to produce code
226 // that is syntactically invalid. Keep this in mind when selecting which behavior you would like
227 // to use.
228 //
229 // Note: This setting has no effect in Vim mode, as rewrap is already allowed everywhere.
230 "allow_rewrap": "in_comments",
231 // Controls whether edit predictions are shown immediately (true)
232 // or manually by triggering `editor::ShowEditPrediction` (false).
233 "show_edit_predictions": true,
234 // Controls whether edit predictions are shown in a given language scope.
235 // Example: ["string", "comment"]
236 "edit_predictions_disabled_in": [],
237 // Whether to show tabs and spaces in the editor.
238 // This setting can take four values:
239 //
240 // 1. Draw tabs and spaces only for the selected text (default):
241 // "selection"
242 // 2. Do not draw any tabs or spaces:
243 // "none"
244 // 3. Draw all invisible symbols:
245 // "all"
246 // 4. Draw whitespaces at boundaries only:
247 // "boundary"
248 // For a whitespace to be on a boundary, any of the following conditions need to be met:
249 // - It is a tab
250 // - It is adjacent to an edge (start or end)
251 // - It is adjacent to a whitespace (left or right)
252 "show_whitespaces": "selection",
253 // Settings related to calls in Zed
254 "calls": {
255 // Join calls with the microphone live by default
256 "mute_on_join": false,
257 // Share your project when you are the first to join a channel
258 "share_on_join": false
259 },
260 // Toolbar related settings
261 "toolbar": {
262 // Whether to show breadcrumbs.
263 "breadcrumbs": true,
264 // Whether to show quick action buttons.
265 "quick_actions": true,
266 // Whether to show the Selections menu in the editor toolbar
267 "selections_menu": true
268 },
269 // Scrollbar related settings
270 "scrollbar": {
271 // When to show the scrollbar in the editor.
272 // This setting can take four values:
273 //
274 // 1. Show the scrollbar if there's important information or
275 // follow the system's configured behavior (default):
276 // "auto"
277 // 2. Match the system's configured behavior:
278 // "system"
279 // 3. Always show the scrollbar:
280 // "always"
281 // 4. Never show the scrollbar:
282 // "never"
283 "show": "auto",
284 // Whether to show cursor positions in the scrollbar.
285 "cursors": true,
286 // Whether to show git diff indicators in the scrollbar.
287 "git_diff": true,
288 // Whether to show buffer search results in the scrollbar.
289 "search_results": true,
290 // Whether to show selected text occurrences in the scrollbar.
291 "selected_text": true,
292 // Whether to show selected symbol occurrences in the scrollbar.
293 "selected_symbol": true,
294 // Which diagnostic indicators to show in the scrollbar:
295 // - "none" or false: do not show diagnostics
296 // - "error": show only errors
297 // - "warning": show only errors and warnings
298 // - "information": show only errors, warnings, and information
299 // - "all" or true: show all diagnostics
300 "diagnostics": "all",
301 // Forcefully enable or disable the scrollbar for each axis
302 "axes": {
303 // When false, forcefully disables the horizontal scrollbar. Otherwise, obey other settings.
304 "horizontal": true,
305 // When false, forcefully disables the vertical scrollbar. Otherwise, obey other settings.
306 "vertical": true
307 }
308 },
309 // Enable middle-click paste on Linux.
310 "middle_click_paste": true,
311 // What to do when multibuffer is double clicked in some of its excerpts
312 // (parts of singleton buffers).
313 // May take 2 values:
314 // 1. Behave as a regular buffer and select the whole word (default).
315 // "double_click_in_multibuffer": "select"
316 // 2. Open the excerpt clicked as a new buffer in the new tab.
317 // "double_click_in_multibuffer": "open",
318 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
319 "double_click_in_multibuffer": "select",
320 "gutter": {
321 // Whether to show line numbers in the gutter.
322 "line_numbers": true,
323 // Whether to show code action buttons in the gutter.
324 "code_actions": true,
325 // Whether to show runnables buttons in the gutter.
326 "runnables": true,
327 // Whether to show fold buttons in the gutter.
328 "folds": true
329 },
330 "indent_guides": {
331 // Whether to show indent guides in the editor.
332 "enabled": true,
333 // The width of the indent guides in pixels, between 1 and 10.
334 "line_width": 1,
335 // The width of the active indent guide in pixels, between 1 and 10.
336 "active_line_width": 1,
337 // Determines how indent guides are colored.
338 // This setting can take the following three values:
339 //
340 // 1. "disabled"
341 // 2. "fixed"
342 // 3. "indent_aware"
343 "coloring": "fixed",
344 // Determines how indent guide backgrounds are colored.
345 // This setting can take the following two values:
346 //
347 // 1. "disabled"
348 // 2. "indent_aware"
349 "background_coloring": "disabled"
350 },
351 // Whether the editor will scroll beyond the last line.
352 "scroll_beyond_last_line": "one_page",
353 // The number of lines to keep above/below the cursor when scrolling.
354 "vertical_scroll_margin": 3,
355 // Whether to scroll when clicking near the edge of the visible text area.
356 "autoscroll_on_clicks": false,
357 // The number of characters to keep on either side when scrolling with the mouse
358 "horizontal_scroll_margin": 5,
359 // Scroll sensitivity multiplier. This multiplier is applied
360 // to both the horizontal and vertical delta values while scrolling.
361 "scroll_sensitivity": 1.0,
362 "relative_line_numbers": false,
363 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
364 "search_wrap": true,
365 // Search options to enable by default when opening new project and buffer searches.
366 "search": {
367 "whole_word": false,
368 "case_sensitive": false,
369 "include_ignored": false,
370 "regex": false
371 },
372 // When to populate a new search's query based on the text under the cursor.
373 // This setting can take the following three values:
374 //
375 // 1. Always populate the search query with the word under the cursor (default).
376 // "always"
377 // 2. Only populate the search query when there is text selected
378 // "selection"
379 // 3. Never populate the search query
380 // "never"
381 "seed_search_query_from_cursor": "always",
382 // When enabled, automatically adjusts search case sensitivity based on your query.
383 // If your search query contains any uppercase letters, the search becomes case-sensitive;
384 // if it contains only lowercase letters, the search becomes case-insensitive.
385 "use_smartcase_search": false,
386 // Inlay hint related settings
387 "inlay_hints": {
388 // Global switch to toggle hints on and off, switched off by default.
389 "enabled": false,
390 // Toggle certain types of hints on and off, all switched on by default.
391 "show_type_hints": true,
392 "show_parameter_hints": true,
393 // Corresponds to null/None LSP hint type value.
394 "show_other_hints": true,
395 // Whether to show a background for inlay hints.
396 //
397 // If set to `true`, the background will use the `hint.background` color from the current theme.
398 "show_background": false,
399 // Time to wait after editing the buffer, before requesting the hints,
400 // set to 0 to disable debouncing.
401 "edit_debounce_ms": 700,
402 // Time to wait after scrolling the buffer, before requesting the hints,
403 // set to 0 to disable debouncing.
404 "scroll_debounce_ms": 50,
405 // A set of modifiers which, when pressed, will toggle the visibility of inlay hints.
406 // If the set if empty or not all the modifiers specified are pressed, inlay hints will not be toggled.
407 "toggle_on_modifiers_press": {
408 "control": false,
409 "shift": false,
410 "alt": false,
411 "platform": false,
412 "function": false
413 }
414 },
415 "project_panel": {
416 // Whether to show the project panel button in the status bar
417 "button": true,
418 // Default width of the project panel.
419 "default_width": 240,
420 // Where to dock the project panel. Can be 'left' or 'right'.
421 "dock": "left",
422 // Spacing between worktree entries in the project panel. Can be 'comfortable' or 'standard'.
423 "entry_spacing": "comfortable",
424 // Whether to show file icons in the project panel.
425 "file_icons": true,
426 // Whether to show folder icons or chevrons for directories in the project panel.
427 "folder_icons": true,
428 // Whether to show the git status in the project panel.
429 "git_status": true,
430 // Amount of indentation for nested items.
431 "indent_size": 20,
432 // Whether to reveal it in the project panel automatically,
433 // when a corresponding project entry becomes active.
434 // Gitignored entries are never auto revealed.
435 "auto_reveal_entries": true,
436 // Whether to fold directories automatically and show compact folders
437 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
438 "auto_fold_dirs": true,
439 // Scrollbar-related settings
440 "scrollbar": {
441 // When to show the scrollbar in the project panel.
442 // This setting can take five values:
443 //
444 // 1. null (default): Inherit editor settings
445 // 2. Show the scrollbar if there's important information or
446 // follow the system's configured behavior (default):
447 // "auto"
448 // 3. Match the system's configured behavior:
449 // "system"
450 // 4. Always show the scrollbar:
451 // "always"
452 // 5. Never show the scrollbar:
453 // "never"
454 "show": null
455 },
456 // Which files containing diagnostic errors/warnings to mark in the project panel.
457 // This setting can take the following three values:
458 //
459 // 1. Do not mark any files:
460 // "off"
461 // 2. Only mark files with errors:
462 // "errors"
463 // 3. Mark files with errors and warnings:
464 // "all"
465 "show_diagnostics": "all",
466 // Settings related to indent guides in the project panel.
467 "indent_guides": {
468 // When to show indent guides in the project panel.
469 // This setting can take two values:
470 //
471 // 1. Always show indent guides:
472 // "always"
473 // 2. Never show indent guides:
474 // "never"
475 "show": "always"
476 }
477 },
478 "outline_panel": {
479 // Whether to show the outline panel button in the status bar
480 "button": true,
481 // Default width of the outline panel.
482 "default_width": 300,
483 // Where to dock the outline panel. Can be 'left' or 'right'.
484 "dock": "left",
485 // Whether to show file icons in the outline panel.
486 "file_icons": true,
487 // Whether to show folder icons or chevrons for directories in the outline panel.
488 "folder_icons": true,
489 // Whether to show the git status in the outline panel.
490 "git_status": true,
491 // Amount of indentation for nested items.
492 "indent_size": 20,
493 // Whether to reveal it in the outline panel automatically,
494 // when a corresponding outline entry becomes active.
495 // Gitignored entries are never auto revealed.
496 "auto_reveal_entries": true,
497 // Whether to fold directories automatically
498 // when a directory has only one directory inside.
499 "auto_fold_dirs": true,
500 // Settings related to indent guides in the outline panel.
501 "indent_guides": {
502 // When to show indent guides in the outline panel.
503 // This setting can take two values:
504 //
505 // 1. Always show indent guides:
506 // "always"
507 // 2. Never show indent guides:
508 // "never"
509 "show": "always"
510 },
511 // Scrollbar-related settings
512 "scrollbar": {
513 // When to show the scrollbar in the project panel.
514 // This setting can take five values:
515 //
516 // 1. null (default): Inherit editor settings
517 // 2. Show the scrollbar if there's important information or
518 // follow the system's configured behavior (default):
519 // "auto"
520 // 3. Match the system's configured behavior:
521 // "system"
522 // 4. Always show the scrollbar:
523 // "always"
524 // 5. Never show the scrollbar:
525 // "never"
526 "show": null
527 }
528 },
529 "collaboration_panel": {
530 // Whether to show the collaboration panel button in the status bar.
531 "button": true,
532 // Where to dock the collaboration panel. Can be 'left' or 'right'.
533 "dock": "left",
534 // Default width of the collaboration panel.
535 "default_width": 240
536 },
537 "chat_panel": {
538 // When to show the chat panel button in the status bar.
539 // Can be 'never', 'always', or 'when_in_call',
540 // or a boolean (interpreted as 'never'/'always').
541 "button": "when_in_call",
542 // Where to the chat panel. Can be 'left' or 'right'.
543 "dock": "right",
544 // Default width of the chat panel.
545 "default_width": 240
546 },
547 "git_panel": {
548 // Whether to show the git panel button in the status bar.
549 "button": true,
550 // Where to show the git panel. Can be 'left' or 'right'.
551 "dock": "left",
552 // Default width of the git panel.
553 "default_width": 360,
554 // Style of the git status indicator in the panel.
555 //
556 // Default: icon
557 "status_style": "icon",
558 // What branch name to use if init.defaultBranch
559 // is not set
560 //
561 // Default: main
562 "fallback_branch_name": "main",
563
564 "scrollbar": {
565 // When to show the scrollbar in the git panel.
566 //
567 // Default: inherits editor scrollbar settings
568 "show": null
569 }
570 },
571 "message_editor": {
572 // Whether to automatically replace emoji shortcodes with emoji characters.
573 // For example: typing `:wave:` gets replaced with `👋`.
574 "auto_replace_emoji_shortcode": true
575 },
576 "notification_panel": {
577 // Whether to show the notification panel button in the status bar.
578 "button": true,
579 // Where to dock the notification panel. Can be 'left' or 'right'.
580 "dock": "right",
581 // Default width of the notification panel.
582 "default_width": 380
583 },
584 "assistant": {
585 // Version of this setting.
586 "version": "2",
587 // Whether the assistant is enabled.
588 "enabled": true,
589 // Whether to show the assistant panel button in the status bar.
590 "button": true,
591 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
592 "dock": "right",
593 // Default width when the assistant is docked to the left or right.
594 "default_width": 640,
595 // Default height when the assistant is docked to the bottom.
596 "default_height": 320,
597 // The default model to use when creating new chats.
598 "default_model": {
599 // The provider to use.
600 "provider": "zed.dev",
601 // The model to use.
602 "model": "claude-3-5-sonnet-latest"
603 },
604 // The model to use when applying edits from the assistant.
605 "editor_model": {
606 // The provider to use.
607 "provider": "zed.dev",
608 // The model to use.
609 "model": "claude-3-5-sonnet-latest"
610 }
611 },
612 // The settings for slash commands.
613 "slash_commands": {
614 // Settings for the `/docs` slash command.
615 "docs": {
616 // Whether `/docs` is enabled.
617 "enabled": false
618 },
619 // Settings for the `/project` slash command.
620 "project": {
621 // Whether `/project` is enabled.
622 "enabled": false
623 }
624 },
625 // Whether the screen sharing icon is shown in the os status bar.
626 "show_call_status_icon": true,
627 // Whether to use language servers to provide code intelligence.
628 "enable_language_server": true,
629 // Whether to perform linked edits of associated ranges, if the language server supports it.
630 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
631 "linked_edits": true,
632 // The list of language servers to use (or disable) for all languages.
633 //
634 // This is typically customized on a per-language basis.
635 "language_servers": ["..."],
636 // When to automatically save edited buffers. This setting can
637 // take four values.
638 //
639 // 1. Never automatically save:
640 // "autosave": "off",
641 // 2. Save when changing focus away from the Zed window:
642 // "autosave": "on_window_change",
643 // 3. Save when changing focus away from a specific buffer:
644 // "autosave": "on_focus_change",
645 // 4. Save when idle for a certain amount of time:
646 // "autosave": { "after_delay": {"milliseconds": 500} },
647 "autosave": "off",
648 // Maximum number of tabs per pane. Unset for unlimited.
649 "max_tabs": null,
650 // Settings related to the editor's tab bar.
651 "tab_bar": {
652 // Whether or not to show the tab bar in the editor
653 "show": true,
654 // Whether or not to show the navigation history buttons.
655 "show_nav_history_buttons": true,
656 // Whether or not to show the tab bar buttons.
657 "show_tab_bar_buttons": true
658 },
659 // Settings related to the editor's tabs
660 "tabs": {
661 // Show git status colors in the editor tabs.
662 "git_status": false,
663 // Position of the close button on the editor tabs.
664 // One of: ["right", "left", "hidden"]
665 "close_position": "right",
666 // Whether to show the file icon for a tab.
667 "file_icons": false,
668 // Controls the appearance behavior of the tab's close button.
669 //
670 // 1. Show it just upon hovering the tab. (default)
671 // "hover"
672 // 2. Show it persistently.
673 // "always"
674 // 3. Never show it, even if hovering it.
675 // "hidden"
676 "show_close_button": "hover",
677 // What to do after closing the current tab.
678 //
679 // 1. Activate the tab that was open previously (default)
680 // "history"
681 // 2. Activate the right neighbour tab if present
682 // "neighbour"
683 // 3. Activate the left neighbour tab if present
684 // "left_neighbour"
685 "activate_on_close": "history",
686 // Which files containing diagnostic errors/warnings to mark in the tabs.
687 // Diagnostics are only shown when file icons are also active.
688 // This setting only works when can take the following three values:
689 //
690 // 1. Do not mark any files:
691 // "off"
692 // 2. Only mark files with errors:
693 // "errors"
694 // 3. Mark files with errors and warnings:
695 // "all"
696 "show_diagnostics": "off"
697 },
698 // Settings related to preview tabs.
699 "preview_tabs": {
700 // Whether preview tabs should be enabled.
701 // Preview tabs allow you to open files in preview mode, where they close automatically
702 // when you switch to another file unless you explicitly pin them.
703 // This is useful for quickly viewing files without cluttering your workspace.
704 "enabled": true,
705 // Whether to open tabs in preview mode when selected from the file finder.
706 "enable_preview_from_file_finder": false,
707 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
708 "enable_preview_from_code_navigation": false
709 },
710 // Settings related to the file finder.
711 "file_finder": {
712 // Whether to show file icons in the file finder.
713 "file_icons": true,
714 // Determines how much space the file finder can take up in relation to the available window width.
715 // There are 5 possible width values:
716 //
717 // 1. Small: This value is essentially a fixed width.
718 // "modal_max_width": "small"
719 // 2. Medium:
720 // "modal_max_width": "medium"
721 // 3. Large:
722 // "modal_max_width": "large"
723 // 4. Extra Large:
724 // "modal_max_width": "xlarge"
725 // 5. Fullscreen: This value removes any horizontal padding, as it consumes the whole viewport width.
726 // "modal_max_width": "full"
727 //
728 // Default: small
729 "modal_max_width": "small"
730 },
731 // Whether or not to remove any trailing whitespace from lines of a buffer
732 // before saving it.
733 "remove_trailing_whitespace_on_save": true,
734 // Whether to start a new line with a comment when a previous line is a comment as well.
735 "extend_comment_on_newline": true,
736 // Removes any lines containing only whitespace at the end of the file and
737 // ensures just one newline at the end.
738 "ensure_final_newline_on_save": true,
739 // Whether or not to perform a buffer format before saving
740 //
741 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
742 "format_on_save": "on",
743 // How to perform a buffer format. This setting can take 4 values:
744 //
745 // 1. Format code using the current language server:
746 // "formatter": "language_server"
747 // 2. Format code using an external command:
748 // "formatter": {
749 // "external": {
750 // "command": "prettier",
751 // "arguments": ["--stdin-filepath", "{buffer_path}"]
752 // }
753 // }
754 // 3. Format code using Zed's Prettier integration:
755 // "formatter": "prettier"
756 // 4. Default. Format files using Zed's Prettier integration (if applicable),
757 // or falling back to formatting via language server:
758 // "formatter": "auto"
759 "formatter": "auto",
760 // How to soft-wrap long lines of text.
761 // Possible values:
762 //
763 // 1. Prefer a single line generally, unless an overly long line is encountered.
764 // "soft_wrap": "none",
765 // "soft_wrap": "prefer_line", // (deprecated, same as "none")
766 // 2. Soft wrap lines that overflow the editor.
767 // "soft_wrap": "editor_width",
768 // 3. Soft wrap lines at the preferred line length.
769 // "soft_wrap": "preferred_line_length",
770 // 4. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
771 // "soft_wrap": "bounded",
772 "soft_wrap": "none",
773 // The column at which to soft-wrap lines, for buffers where soft-wrap
774 // is enabled.
775 "preferred_line_length": 80,
776 // Whether to indent lines using tab characters, as opposed to multiple
777 // spaces.
778 "hard_tabs": false,
779 // How many columns a tab should occupy.
780 "tab_size": 4,
781 // Control what info is collected by Zed.
782 "telemetry": {
783 // Send debug info like crash reports.
784 "diagnostics": true,
785 // Send anonymized usage data like what languages you're using Zed with.
786 "metrics": true
787 },
788 // Automatically update Zed. This setting may be ignored on Linux if
789 // installed through a package manager.
790 "auto_update": true,
791 // Diagnostics configuration.
792 "diagnostics": {
793 // Whether to show warnings or not by default.
794 "include_warnings": true,
795 // Settings for inline diagnostics
796 "inline": {
797 // Whether to show diagnostics inline or not
798 "enabled": false,
799 // The delay in milliseconds to show inline diagnostics after the
800 // last diagnostic update.
801 "update_debounce_ms": 150,
802 // The amount of padding between the end of the source line and the start
803 // of the inline diagnostic in units of em widths.
804 "padding": 4,
805 // The minimum column to display inline diagnostics. This setting can be
806 // used to horizontally align inline diagnostics at some column. Lines
807 // longer than this value will still push diagnostics further to the right.
808 "min_column": 0,
809 // The minimum severity of the diagnostics to show inline.
810 // Shows all diagnostics when not specified.
811 "max_severity": null
812 }
813 },
814 // Files or globs of files that will be excluded by Zed entirely. They will be skipped during file
815 // scans, file searches, and not be displayed in the project file tree. Takes precedence over `file_scan_inclusions`.
816 "file_scan_exclusions": [
817 "**/.git",
818 "**/.svn",
819 "**/.hg",
820 "**/.jj",
821 "**/CVS",
822 "**/.DS_Store",
823 "**/Thumbs.db",
824 "**/.classpath",
825 "**/.settings"
826 ],
827 // Files or globs of files that will be included by Zed, even when ignored by git. This is useful
828 // for files that are not tracked by git, but are still important to your project. Note that globs
829 // that are overly broad can slow down Zed's file scanning. `file_scan_exclusions` takes
830 // precedence over these inclusions.
831 "file_scan_inclusions": [".env*"],
832 // Git gutter behavior configuration.
833 "git": {
834 // Control whether the git gutter is shown. May take 2 values:
835 // 1. Show the gutter
836 // "git_gutter": "tracked_files"
837 // 2. Hide the gutter
838 // "git_gutter": "hide"
839 "git_gutter": "tracked_files",
840 // Control whether the git blame information is shown inline,
841 // in the currently focused line.
842 "inline_blame": {
843 "enabled": true
844 // Sets a delay after which the inline blame information is shown.
845 // Delay is restarted with every cursor movement.
846 // "delay_ms": 600
847 //
848 // Whether or not to display the git commit summary on the same line.
849 // "show_commit_summary": false
850 //
851 // The minimum column number to show the inline blame information at
852 // "min_column": 0
853 },
854 // How git hunks are displayed visually in the editor.
855 // This setting can take two values:
856 //
857 // 1. Show unstaged hunks filled and staged hunks hollow:
858 // "hunk_style": "staged_hollow"
859 // 2. Show unstaged hunks hollow and staged hunks filled:
860 // "hunk_style": "unstaged_hollow"
861 "hunk_style": "staged_hollow"
862 },
863 // The list of custom Git hosting providers.
864 "git_hosting_providers": [
865 // {
866 // "provider": "github",
867 // "name": "BigCorp GitHub",
868 // "base_url": "https://code.big-corp.com"
869 // }
870 ],
871 // Configuration for how direnv configuration should be loaded. May take 2 values:
872 // 1. Load direnv configuration using `direnv export json` directly.
873 // "load_direnv": "direct"
874 // 2. Load direnv configuration through the shell hook, works for POSIX shells and fish.
875 // "load_direnv": "shell_hook"
876 "load_direnv": "direct",
877 "edit_predictions": {
878 // A list of globs representing files that edit predictions should be disabled for.
879 // There's a sensible default list of globs already included.
880 // Any addition to this list will be merged with the default list.
881 // Globs are matched relative to the worktree root,
882 // except when starting with a slash (/) or equivalent in Windows.
883 "disabled_globs": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/.dev.vars", "**/secrets.yml"],
884 // When to show edit predictions previews in buffer.
885 // This setting takes two possible values:
886 // 1. Display predictions inline when there are no language server completions available.
887 // "mode": "eager"
888 // 2. Display predictions inline only when holding a modifier key (alt by default).
889 // "mode": "subtle"
890 "mode": "eager",
891 // Whether edit predictions are enabled in the assistant panel.
892 // This setting has no effect if globally disabled.
893 "enabled_in_assistant": true
894 },
895 // Settings specific to journaling
896 "journal": {
897 // The path of the directory where journal entries are stored
898 "path": "~",
899 // What format to display the hours in
900 // May take 2 values:
901 // 1. hour12
902 // 2. hour24
903 "hour_format": "hour12"
904 },
905 // Settings specific to the terminal
906 "terminal": {
907 // What shell to use when opening a terminal. May take 3 values:
908 // 1. Use the system's default terminal configuration in /etc/passwd
909 // "shell": "system"
910 // 2. A program:
911 // "shell": {
912 // "program": "sh"
913 // }
914 // 3. A program with arguments:
915 // "shell": {
916 // "with_arguments": {
917 // "program": "/bin/bash",
918 // "args": ["--login"]
919 // }
920 // }
921 "shell": "system",
922 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
923 "dock": "bottom",
924 // Default width when the terminal is docked to the left or right.
925 "default_width": 640,
926 // Default height when the terminal is docked to the bottom.
927 "default_height": 320,
928 // What working directory to use when launching the terminal.
929 // May take 4 values:
930 // 1. Use the current file's project directory. Will Fallback to the
931 // first project directory strategy if unsuccessful
932 // "working_directory": "current_project_directory"
933 // 2. Use the first project in this workspace's directory
934 // "working_directory": "first_project_directory"
935 // 3. Always use this platform's home directory (if we can find it)
936 // "working_directory": "always_home"
937 // 4. Always use a specific directory. This value will be shell expanded.
938 // If this path is not a valid directory the terminal will default to
939 // this platform's home directory (if we can find it)
940 // "working_directory": {
941 // "always": {
942 // "directory": "~/zed/projects/"
943 // }
944 // }
945 "working_directory": "current_project_directory",
946 // Set the cursor blinking behavior in the terminal.
947 // May take 3 values:
948 // 1. Never blink the cursor, ignoring the terminal mode
949 // "blinking": "off",
950 // 2. Default the cursor blink to off, but allow the terminal to
951 // set blinking
952 // "blinking": "terminal_controlled",
953 // 3. Always blink the cursor, ignoring the terminal mode
954 // "blinking": "on",
955 "blinking": "terminal_controlled",
956 // Default cursor shape for the terminal.
957 // 1. A block that surrounds the following character
958 // "block"
959 // 2. A vertical bar
960 // "bar"
961 // 3. An underline / underscore that runs along the following character
962 // "underline"
963 // 4. A box drawn around the following character
964 // "hollow"
965 //
966 // Default: not set, defaults to "block"
967 "cursor_shape": null,
968 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
969 // Alternate Scroll mode converts mouse scroll events into up / down key
970 // presses when in the alternate screen (e.g. when running applications
971 // like vim or less). The terminal can still set and unset this mode.
972 // May take 2 values:
973 // 1. Default alternate scroll mode to on
974 // "alternate_scroll": "on",
975 // 2. Default alternate scroll mode to off
976 // "alternate_scroll": "off",
977 "alternate_scroll": "off",
978 // Set whether the option key behaves as the meta key.
979 // May take 2 values:
980 // 1. Rely on default platform handling of option key, on macOS
981 // this means generating certain unicode characters
982 // "option_as_meta": false,
983 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
984 // "option_as_meta": true,
985 "option_as_meta": false,
986 // Whether or not selecting text in the terminal will automatically
987 // copy to the system clipboard.
988 "copy_on_select": false,
989 // Whether to show the terminal button in the status bar
990 "button": true,
991 // Any key-value pairs added to this list will be added to the terminal's
992 // environment. Use `:` to separate multiple values.
993 "env": {
994 // "KEY": "value1:value2"
995 },
996 // Set the terminal's line height.
997 // May take 3 values:
998 // 1. Use a line height that's comfortable for reading, 1.618
999 // "line_height": "comfortable"
1000 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
1001 // particularly if they use box characters
1002 // "line_height": "standard",
1003 // 3. Use a custom line height.
1004 // "line_height": {
1005 // "custom": 2
1006 // },
1007 "line_height": "comfortable",
1008 // Activate the python virtual environment, if one is found, in the
1009 // terminal's working directory (as resolved by the working_directory
1010 // setting). Set this to "off" to disable this behavior.
1011 "detect_venv": {
1012 "on": {
1013 // Default directories to search for virtual environments, relative
1014 // to the current working directory. We recommend overriding this
1015 // in your project's settings, rather than globally.
1016 "directories": [".env", "env", ".venv", "venv"],
1017 // Can also be `csh`, `fish`, `nushell` and `power_shell`
1018 "activate_script": "default"
1019 }
1020 },
1021 "toolbar": {
1022 // Whether to display the terminal title in its toolbar's breadcrumbs.
1023 // Only shown if the terminal title is not empty.
1024 //
1025 // The shell running in the terminal needs to be configured to emit the title.
1026 // Example: `echo -e "\e]2;New Title\007";`
1027 "breadcrumbs": true
1028 },
1029 // Scrollbar-related settings
1030 "scrollbar": {
1031 // When to show the scrollbar in the terminal.
1032 // This setting can take five values:
1033 //
1034 // 1. null (default): Inherit editor settings
1035 // 2. Show the scrollbar if there's important information or
1036 // follow the system's configured behavior (default):
1037 // "auto"
1038 // 3. Match the system's configured behavior:
1039 // "system"
1040 // 4. Always show the scrollbar:
1041 // "always"
1042 // 5. Never show the scrollbar:
1043 // "never"
1044 "show": null
1045 }
1046 // Set the terminal's font size. If this option is not included,
1047 // the terminal will default to matching the buffer's font size.
1048 // "font_size": 15,
1049 // Set the terminal's font family. If this option is not included,
1050 // the terminal will default to matching the buffer's font family.
1051 // "font_family": "Zed Plex Mono",
1052 // Set the terminal's font fallbacks. If this option is not included,
1053 // the terminal will default to matching the buffer's font fallbacks.
1054 // This will be merged with the platform's default font fallbacks
1055 // "font_fallbacks": ["FiraCode Nerd Fonts"],
1056 // Sets the maximum number of lines in the terminal's scrollback buffer.
1057 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
1058 // Existing terminals will not pick up this change until they are recreated.
1059 // "max_scroll_history_lines": 10000,
1060 },
1061 "code_actions_on_format": {},
1062 // Settings related to running tasks.
1063 "tasks": {
1064 "variables": {}
1065 },
1066 // An object whose keys are language names, and whose values
1067 // are arrays of filenames or extensions of files that should
1068 // use those languages.
1069 //
1070 // For example, to treat files like `foo.notjs` as JavaScript,
1071 // and `Embargo.lock` as TOML:
1072 //
1073 // {
1074 // "JavaScript": ["notjs"],
1075 // "TOML": ["Embargo.lock"]
1076 // }
1077 //
1078 "file_types": {
1079 "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "**/.vscode/**/*.json"],
1080 "Shell Script": [".env.*"]
1081 },
1082 // By default use a recent system version of node, or install our own.
1083 // You can override this to use a version of node that is not in $PATH with:
1084 // {
1085 // "node": {
1086 // "path": "/path/to/node"
1087 // "npm_path": "/path/to/npm" (defaults to node_path/../npm)
1088 // }
1089 // }
1090 // or to ensure Zed always downloads and installs an isolated version of node:
1091 // {
1092 // "node": {
1093 // "ignore_system_version": true,
1094 // }
1095 // NOTE: changing this setting currently requires restarting Zed.
1096 "node": {},
1097 // The extensions that Zed should automatically install on startup.
1098 //
1099 // If you don't want any of these extensions, add this field to your settings
1100 // and change the value to `false`.
1101 "auto_install_extensions": {
1102 "html": true
1103 },
1104 // Controls how completions are processed for this language.
1105 "completions": {
1106 // Controls how words are completed.
1107 // For large documents, not all words may be fetched for completion.
1108 //
1109 // May take 3 values:
1110 // 1. "enabled"
1111 // Always fetch document's words for completions along with LSP completions.
1112 // 2. "fallback"
1113 // Only if LSP response errors or times out, use document's words to show completions.
1114 // 3. "disabled"
1115 // Never fetch or complete document's words for completions.
1116 // (Word-based completions can still be queried via a separate action)
1117 //
1118 // Default: fallback
1119 "words": "fallback",
1120 // Whether to fetch LSP completions or not.
1121 //
1122 // Default: true
1123 "lsp": true,
1124 // When fetching LSP completions, determines how long to wait for a response of a particular server.
1125 // When set to 0, waits indefinitely.
1126 //
1127 // Default: 0
1128 "lsp_fetch_timeout_ms": 0
1129 },
1130 // Different settings for specific languages.
1131 "languages": {
1132 "Astro": {
1133 "language_servers": ["astro-language-server", "..."],
1134 "prettier": {
1135 "allowed": true,
1136 "plugins": ["prettier-plugin-astro"]
1137 }
1138 },
1139 "Blade": {
1140 "prettier": {
1141 "allowed": true
1142 }
1143 },
1144 "C": {
1145 "format_on_save": "off",
1146 "use_on_type_format": false,
1147 "prettier": {
1148 "allowed": false
1149 }
1150 },
1151 "C++": {
1152 "format_on_save": "off",
1153 "use_on_type_format": false,
1154 "prettier": {
1155 "allowed": false
1156 }
1157 },
1158 "CSS": {
1159 "prettier": {
1160 "allowed": true
1161 }
1162 },
1163 "Dart": {
1164 "tab_size": 2
1165 },
1166 "Diff": {
1167 "show_edit_predictions": false,
1168 "remove_trailing_whitespace_on_save": false,
1169 "ensure_final_newline_on_save": false
1170 },
1171 "Elixir": {
1172 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1173 },
1174 "Erlang": {
1175 "language_servers": ["erlang-ls", "!elp", "..."]
1176 },
1177 "Git Commit": {
1178 "allow_rewrap": "anywhere"
1179 },
1180 "Go": {
1181 "code_actions_on_format": {
1182 "source.organizeImports": true
1183 }
1184 },
1185 "GraphQL": {
1186 "prettier": {
1187 "allowed": true
1188 }
1189 },
1190 "HEEX": {
1191 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1192 },
1193 "HTML": {
1194 "prettier": {
1195 "allowed": true
1196 }
1197 },
1198 "Java": {
1199 "prettier": {
1200 "allowed": true,
1201 "plugins": ["prettier-plugin-java"]
1202 }
1203 },
1204 "JavaScript": {
1205 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1206 "prettier": {
1207 "allowed": true
1208 }
1209 },
1210 "JSON": {
1211 "prettier": {
1212 "allowed": true
1213 }
1214 },
1215 "JSONC": {
1216 "prettier": {
1217 "allowed": true
1218 }
1219 },
1220 "Markdown": {
1221 "format_on_save": "off",
1222 "use_on_type_format": false,
1223 "allow_rewrap": "anywhere",
1224 "soft_wrap": "bounded",
1225 "prettier": {
1226 "allowed": true
1227 }
1228 },
1229 "PHP": {
1230 "language_servers": ["phpactor", "!intelephense", "..."],
1231 "prettier": {
1232 "allowed": true,
1233 "plugins": ["@prettier/plugin-php"],
1234 "parser": "php"
1235 }
1236 },
1237 "Plain Text": {
1238 "allow_rewrap": "anywhere"
1239 },
1240 "Ruby": {
1241 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
1242 },
1243 "SCSS": {
1244 "prettier": {
1245 "allowed": true
1246 }
1247 },
1248 "SQL": {
1249 "prettier": {
1250 "allowed": true,
1251 "plugins": ["prettier-plugin-sql"]
1252 }
1253 },
1254 "Starlark": {
1255 "language_servers": ["starpls", "!buck2-lsp", "..."]
1256 },
1257 "Svelte": {
1258 "language_servers": ["svelte-language-server", "..."],
1259 "prettier": {
1260 "allowed": true,
1261 "plugins": ["prettier-plugin-svelte"]
1262 }
1263 },
1264 "TSX": {
1265 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1266 "prettier": {
1267 "allowed": true
1268 }
1269 },
1270 "Twig": {
1271 "prettier": {
1272 "allowed": true
1273 }
1274 },
1275 "TypeScript": {
1276 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1277 "prettier": {
1278 "allowed": true
1279 }
1280 },
1281 "Vue.js": {
1282 "language_servers": ["vue-language-server", "..."],
1283 "prettier": {
1284 "allowed": true
1285 }
1286 },
1287 "XML": {
1288 "prettier": {
1289 "allowed": true,
1290 "plugins": ["@prettier/plugin-xml"]
1291 }
1292 },
1293 "YAML": {
1294 "prettier": {
1295 "allowed": true
1296 }
1297 },
1298 "Zig": {
1299 "language_servers": ["zls", "..."]
1300 }
1301 },
1302 // Different settings for specific language models.
1303 "language_models": {
1304 "anthropic": {
1305 "version": "1",
1306 "api_url": "https://api.anthropic.com"
1307 },
1308 "google": {
1309 "api_url": "https://generativelanguage.googleapis.com"
1310 },
1311 "ollama": {
1312 "api_url": "http://localhost:11434"
1313 },
1314 "openai": {
1315 "version": "1",
1316 "api_url": "https://api.openai.com/v1"
1317 },
1318 "lmstudio": {
1319 "api_url": "http://localhost:1234/api/v0"
1320 },
1321 "deepseek": {
1322 "api_url": "https://api.deepseek.com"
1323 },
1324 "mistral": {
1325 "api_url": "https://api.mistral.ai/v1"
1326 }
1327 },
1328 // Zed's Prettier integration settings.
1329 // Allows to enable/disable formatting with Prettier
1330 // and configure default Prettier, used when no project-level Prettier installation is found.
1331 "prettier": {
1332 // // Whether to consider prettier formatter or not when attempting to format a file.
1333 // "allowed": false,
1334 //
1335 // // Use regular Prettier json configuration.
1336 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1337 // // the project has no other Prettier installed.
1338 // "plugins": [],
1339 //
1340 // // Use regular Prettier json configuration.
1341 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1342 // // the project has no other Prettier installed.
1343 // "trailingComma": "es5",
1344 // "tabWidth": 4,
1345 // "semi": false,
1346 // "singleQuote": true
1347 },
1348 // Settings for auto-closing of JSX tags.
1349 "jsx_tag_auto_close": {
1350 "enabled": true
1351 },
1352 // LSP Specific settings.
1353 "lsp": {
1354 // Specify the LSP name as a key here.
1355 // "rust-analyzer": {
1356 // // These initialization options are merged into Zed's defaults
1357 // "initialization_options": {
1358 // "check": {
1359 // "command": "clippy" // rust-analyzer.check.command (default: "check")
1360 // }
1361 // }
1362 // }
1363 },
1364 // Jupyter settings
1365 "jupyter": {
1366 "enabled": true
1367 // Specify the language name as the key and the kernel name as the value.
1368 // "kernel_selections": {
1369 // "python": "conda-base"
1370 // "typescript": "deno"
1371 // }
1372 },
1373 // Vim settings
1374 "vim": {
1375 "default_mode": "normal",
1376 "toggle_relative_line_numbers": false,
1377 "use_system_clipboard": "always",
1378 "use_multiline_find": false,
1379 "use_smartcase_find": false,
1380 "highlight_on_yank_duration": 200,
1381 "custom_digraphs": {}
1382 },
1383 // The server to connect to. If the environment variable
1384 // ZED_SERVER_URL is set, it will override this setting.
1385 "server_url": "https://zed.dev",
1386 // Settings overrides to use when using Zed Preview.
1387 // Mostly useful for developers who are managing multiple instances of Zed.
1388 "preview": {
1389 // "theme": "Andromeda"
1390 },
1391 // Settings overrides to use when using Zed Nightly.
1392 // Mostly useful for developers who are managing multiple instances of Zed.
1393 "nightly": {
1394 // "theme": "Andromeda"
1395 },
1396 // Settings overrides to use when using Zed Stable.
1397 // Mostly useful for developers who are managing multiple instances of Zed.
1398 "stable": {
1399 // "theme": "Andromeda"
1400 },
1401 // Settings overrides to use when using Zed Dev.
1402 // Mostly useful for developers who are managing multiple instances of Zed.
1403 "dev": {
1404 // "theme": "Andromeda"
1405 },
1406 // Task-related settings.
1407 "task": {
1408 // Whether to show task status indicator in the status bar. Default: true
1409 "show_status_indicator": true
1410 },
1411 // Whether to show full labels in line indicator or short ones
1412 //
1413 // Values:
1414 // - `short`: "2 s, 15 l, 32 c"
1415 // - `long`: "2 selections, 15 lines, 32 characters"
1416 // Default: long
1417 "line_indicator_format": "long",
1418 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1419 //
1420 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1421 // `socks5h`. `http` will be used when no scheme is specified.
1422 //
1423 // By default no proxy will be used, or Zed will try get proxy settings from
1424 // environment variables.
1425 //
1426 // Examples:
1427 // - "proxy": "socks5h://localhost:10808"
1428 // - "proxy": "http://127.0.0.1:10809"
1429 "proxy": null,
1430 // Set to configure aliases for the command palette.
1431 // When typing a query which is a key of this object, the value will be used instead.
1432 //
1433 // Examples:
1434 // {
1435 // "W": "workspace::Save"
1436 // }
1437 "command_aliases": {},
1438 // Whether to show user picture in titlebar.
1439 "show_user_picture": true,
1440 // ssh_connections is an array of ssh connections.
1441 // You can configure these from `project: Open Remote` in the command palette.
1442 // Zed's ssh support will pull configuration from your ~/.ssh too.
1443 // Examples:
1444 // [
1445 // {
1446 // "host": "example-box",
1447 // // "port": 22, "username": "test", "args": ["-i", "/home/user/.ssh/id_rsa"]
1448 // "projects": [
1449 // {
1450 // "paths": ["/home/user/code/zed"]
1451 // }
1452 // ]
1453 // }
1454 // ]
1455 "ssh_connections": [],
1456 // Configures context servers for use in the Assistant.
1457 "context_servers": {}
1458}