1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 "icon_theme": "Zed (Default)",
14 // The name of a base set of key bindings to use.
15 // This setting can take six values, each named after another
16 // text editor:
17 //
18 // 1. "VSCode"
19 // 2. "Atom"
20 // 3. "JetBrains"
21 // 4. "None"
22 // 5. "SublimeText"
23 // 6. "TextMate"
24 "base_keymap": "VSCode",
25 // Features that can be globally enabled or disabled
26 "features": {
27 // Which edit prediction provider to use.
28 "edit_prediction_provider": "zed"
29 },
30 // The name of a font to use for rendering text in the editor
31 "buffer_font_family": "Zed Plex Mono",
32 // Set the buffer text's font fallbacks, this will be merged with
33 // the platform's default fallbacks.
34 "buffer_font_fallbacks": null,
35 // The OpenType features to enable for text in the editor.
36 "buffer_font_features": {
37 // Disable ligatures:
38 // "calt": false
39 },
40 // The default font size for text in the editor
41 "buffer_font_size": 15,
42 // The weight of the editor font in standard CSS units from 100 to 900.
43 "buffer_font_weight": 400,
44 // Set the buffer's line height.
45 // May take 3 values:
46 // 1. Use a line height that's comfortable for reading (1.618)
47 // "buffer_line_height": "comfortable"
48 // 2. Use a standard line height, (1.3)
49 // "buffer_line_height": "standard",
50 // 3. Use a custom line height
51 // "buffer_line_height": {
52 // "custom": 2
53 // },
54 "buffer_line_height": "comfortable",
55 // The name of a font to use for rendering text in the UI
56 // You can set this to ".SystemUIFont" to use the system font
57 "ui_font_family": "Zed Plex Sans",
58 // Set the UI's font fallbacks, this will be merged with the platform's
59 // default font fallbacks.
60 "ui_font_fallbacks": null,
61 // The OpenType features to enable for text in the UI
62 "ui_font_features": {
63 // Disable ligatures:
64 "calt": false
65 },
66 // The weight of the UI font in standard CSS units from 100 to 900.
67 "ui_font_weight": 400,
68 // The default font size for text in the UI
69 "ui_font_size": 16,
70 // How much to fade out unused code.
71 "unnecessary_code_fade": 0.3,
72 // Active pane styling settings.
73 "active_pane_modifiers": {
74 // The factor to grow the active pane by. Defaults to 1.0
75 // which gives the same size as all other panes.
76 "magnification": 1.0,
77 // Inset border size of the active pane, in pixels.
78 "border_size": 0.0,
79 // Opacity of the inactive panes. 0 means transparent, 1 means opaque.
80 // Values are clamped to the [0.0, 1.0] range.
81 "inactive_opacity": 1.0
82 },
83 // The direction that you want to split panes horizontally. Defaults to "up"
84 "pane_split_direction_horizontal": "up",
85 // The direction that you want to split panes horizontally. Defaults to "left"
86 "pane_split_direction_vertical": "left",
87 // Centered layout related settings.
88 "centered_layout": {
89 // The relative width of the left padding of the central pane from the
90 // workspace when the centered layout is used.
91 "left_padding": 0.2,
92 // The relative width of the right padding of the central pane from the
93 // workspace when the centered layout is used.
94 "right_padding": 0.2
95 },
96 // All settings related to the image viewer.
97 "image_viewer": {
98 // The unit for image file sizes.
99 // By default we're setting it to binary.
100 // The second option is decimal.
101 "unit": "binary"
102 },
103 // The key to use for adding multiple cursors
104 // Currently "alt" or "cmd_or_ctrl" (also aliased as
105 // "cmd" and "ctrl") are supported.
106 "multi_cursor_modifier": "alt",
107 // Whether to enable vim modes and key bindings.
108 "vim_mode": false,
109 // Whether to show the informational hover box when moving the mouse
110 // over symbols in the editor.
111 "hover_popover_enabled": true,
112 // Time to wait before showing the informational hover box
113 "hover_popover_delay": 350,
114 // Whether to confirm before quitting Zed.
115 "confirm_quit": false,
116 // Whether to restore last closed project when fresh Zed instance is opened.
117 "restore_on_startup": "last_session",
118 // Size of the drop target in the editor.
119 "drop_target_size": 0.2,
120 // Whether the window should be closed when using 'close active item' on a window with no tabs.
121 // May take 3 values:
122 // 1. Use the current platform's convention
123 // "when_closing_with_no_tabs": "platform_default"
124 // 2. Always close the window:
125 // "when_closing_with_no_tabs": "close_window",
126 // 3. Never close the window
127 // "when_closing_with_no_tabs": "keep_window_open",
128 "when_closing_with_no_tabs": "platform_default",
129 // What to do when the last window is closed.
130 // May take 2 values:
131 // 1. Use the current platform's convention
132 // "on_last_window_closed": "platform_default"
133 // 2. Always quit the application
134 // "on_last_window_closed": "quit_app",
135 "on_last_window_closed": "platform_default",
136 // Whether to use the system provided dialogs for Open and Save As.
137 // When set to false, Zed will use the built-in keyboard-first pickers.
138 "use_system_path_prompts": true,
139 // Whether to use the system provided dialogs for prompts, such as confirmation
140 // prompts.
141 // When set to false, Zed will use its built-in prompts. Note that on Linux,
142 // this option is ignored and Zed will always use the built-in prompts.
143 "use_system_prompts": true,
144 // Whether the cursor blinks in the editor.
145 "cursor_blink": true,
146 // Cursor shape for the default editor.
147 // 1. A vertical bar
148 // "bar"
149 // 2. A block that surrounds the following character
150 // "block"
151 // 3. An underline / underscore that runs along the following character
152 // "underline"
153 // 4. A box drawn around the following character
154 // "hollow"
155 //
156 // Default: not set, defaults to "bar"
157 "cursor_shape": null,
158 // How to highlight the current line in the editor.
159 //
160 // 1. Don't highlight the current line:
161 // "none"
162 // 2. Highlight the gutter area:
163 // "gutter"
164 // 3. Highlight the editor area:
165 // "line"
166 // 4. Highlight the full line (default):
167 // "all"
168 "current_line_highlight": "all",
169 // Whether to highlight all occurrences of the selected text in an editor.
170 "selection_highlight": true,
171 // The debounce delay before querying highlights based on the selected text.
172 "selection_highlight_debounce": 50,
173 // The debounce delay before querying highlights from the language
174 // server based on the current cursor location.
175 "lsp_highlight_debounce": 75,
176 // Whether to pop the completions menu while typing in an editor without
177 // explicitly requesting it.
178 "show_completions_on_input": true,
179 // Whether to display inline and alongside documentation for items in the
180 // completions menu
181 "show_completion_documentation": true,
182 // Show method signatures in the editor, when inside parentheses.
183 "auto_signature_help": false,
184 // Whether to show the signature help after completion or a bracket pair inserted.
185 // If `auto_signature_help` is enabled, this setting will be treated as enabled also.
186 "show_signature_help_after_edits": false,
187 // Whether to show wrap guides (vertical rulers) in the editor.
188 // Setting this to true will show a guide at the 'preferred_line_length' value
189 // if 'soft_wrap' is set to 'preferred_line_length', and will show any
190 // additional guides as specified by the 'wrap_guides' setting.
191 "show_wrap_guides": true,
192 // Character counts at which to show wrap guides in the editor.
193 "wrap_guides": [],
194 // Hide the values of in variables from visual display in private files
195 "redact_private_values": false,
196 // The default number of lines to expand excerpts in the multibuffer by.
197 "expand_excerpt_lines": 3,
198 // Globs to match against file paths to determine if a file is private.
199 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
200 // Whether to use additional LSP queries to format (and amend) the code after
201 // every "trigger" symbol input, defined by LSP server capabilities.
202 "use_on_type_format": true,
203 // Whether to automatically add matching closing characters when typing
204 // opening parenthesis, bracket, brace, single or double quote characters.
205 // For example, when you type (, Zed will add a closing ) at the correct position.
206 "use_autoclose": true,
207 // Whether to automatically surround selected text when typing opening parenthesis,
208 // bracket, brace, single or double quote characters.
209 // For example, when you select text and type (, Zed will surround the text with ().
210 "use_auto_surround": true,
211 // Whether indentation of pasted content should be adjusted based on the context.
212 "auto_indent_on_paste": true,
213 // Controls how the editor handles the autoclosed characters.
214 // When set to `false`(default), skipping over and auto-removing of the closing characters
215 // happen only for auto-inserted characters.
216 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
217 // no matter how they were inserted.
218 "always_treat_brackets_as_autoclosed": false,
219 // Controls where the `editor::Rewrap` action is allowed in the current language scope.
220 //
221 // This setting can take three values:
222 //
223 // 1. Only allow rewrapping in comments:
224 // "in_comments"
225 // 2. Only allow rewrapping in the current selection(s):
226 // "in_selections"
227 // 3. Allow rewrapping anywhere:
228 // "anywhere"
229 //
230 // When using values other than `in_comments`, it is possible for the rewrapping to produce code
231 // that is syntactically invalid. Keep this in mind when selecting which behavior you would like
232 // to use.
233 //
234 // Note: This setting has no effect in Vim mode, as rewrap is already allowed everywhere.
235 "allow_rewrap": "in_comments",
236 // Controls whether edit predictions are shown immediately (true)
237 // or manually by triggering `editor::ShowEditPrediction` (false).
238 "show_edit_predictions": true,
239 // Controls whether edit predictions are shown in a given language scope.
240 // Example: ["string", "comment"]
241 "edit_predictions_disabled_in": [],
242 // Whether to show tabs and spaces in the editor.
243 // This setting can take four values:
244 //
245 // 1. Draw tabs and spaces only for the selected text (default):
246 // "selection"
247 // 2. Do not draw any tabs or spaces:
248 // "none"
249 // 3. Draw all invisible symbols:
250 // "all"
251 // 4. Draw whitespaces at boundaries only:
252 // "boundary"
253 // For a whitespace to be on a boundary, any of the following conditions need to be met:
254 // - It is a tab
255 // - It is adjacent to an edge (start or end)
256 // - It is adjacent to a whitespace (left or right)
257 "show_whitespaces": "selection",
258 // Settings related to calls in Zed
259 "calls": {
260 // Join calls with the microphone live by default
261 "mute_on_join": false,
262 // Share your project when you are the first to join a channel
263 "share_on_join": false
264 },
265 // Toolbar related settings
266 "toolbar": {
267 // Whether to show breadcrumbs.
268 "breadcrumbs": true,
269 // Whether to show quick action buttons.
270 "quick_actions": true,
271 // Whether to show the Selections menu in the editor toolbar
272 "selections_menu": true
273 },
274 // Scrollbar related settings
275 "scrollbar": {
276 // When to show the scrollbar in the editor.
277 // This setting can take four values:
278 //
279 // 1. Show the scrollbar if there's important information or
280 // follow the system's configured behavior (default):
281 // "auto"
282 // 2. Match the system's configured behavior:
283 // "system"
284 // 3. Always show the scrollbar:
285 // "always"
286 // 4. Never show the scrollbar:
287 // "never"
288 "show": "auto",
289 // Whether to show cursor positions in the scrollbar.
290 "cursors": true,
291 // Whether to show git diff indicators in the scrollbar.
292 "git_diff": true,
293 // Whether to show buffer search results in the scrollbar.
294 "search_results": true,
295 // Whether to show selected text occurrences in the scrollbar.
296 "selected_text": true,
297 // Whether to show selected symbol occurrences in the scrollbar.
298 "selected_symbol": true,
299 // Which diagnostic indicators to show in the scrollbar:
300 // - "none" or false: do not show diagnostics
301 // - "error": show only errors
302 // - "warning": show only errors and warnings
303 // - "information": show only errors, warnings, and information
304 // - "all" or true: show all diagnostics
305 "diagnostics": "all",
306 // Forcefully enable or disable the scrollbar for each axis
307 "axes": {
308 // When false, forcefully disables the horizontal scrollbar. Otherwise, obey other settings.
309 "horizontal": true,
310 // When false, forcefully disables the vertical scrollbar. Otherwise, obey other settings.
311 "vertical": true
312 }
313 },
314 // Enable middle-click paste on Linux.
315 "middle_click_paste": true,
316 // What to do when multibuffer is double clicked in some of its excerpts
317 // (parts of singleton buffers).
318 // May take 2 values:
319 // 1. Behave as a regular buffer and select the whole word (default).
320 // "double_click_in_multibuffer": "select"
321 // 2. Open the excerpt clicked as a new buffer in the new tab.
322 // "double_click_in_multibuffer": "open",
323 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
324 "double_click_in_multibuffer": "select",
325 "gutter": {
326 // Whether to show line numbers in the gutter.
327 "line_numbers": true,
328 // Whether to show code action buttons in the gutter.
329 "code_actions": true,
330 // Whether to show runnables buttons in the gutter.
331 "runnables": true,
332 // Whether to show breakpoints in the gutter.
333 "breakpoints": true,
334 // Whether to show fold buttons in the gutter.
335 "folds": true
336 },
337 "indent_guides": {
338 // Whether to show indent guides in the editor.
339 "enabled": true,
340 // The width of the indent guides in pixels, between 1 and 10.
341 "line_width": 1,
342 // The width of the active indent guide in pixels, between 1 and 10.
343 "active_line_width": 1,
344 // Determines how indent guides are colored.
345 // This setting can take the following three values:
346 //
347 // 1. "disabled"
348 // 2. "fixed"
349 // 3. "indent_aware"
350 "coloring": "fixed",
351 // Determines how indent guide backgrounds are colored.
352 // This setting can take the following two values:
353 //
354 // 1. "disabled"
355 // 2. "indent_aware"
356 "background_coloring": "disabled"
357 },
358 // Whether the editor will scroll beyond the last line.
359 "scroll_beyond_last_line": "one_page",
360 // The number of lines to keep above/below the cursor when scrolling.
361 "vertical_scroll_margin": 3,
362 // Whether to scroll when clicking near the edge of the visible text area.
363 "autoscroll_on_clicks": false,
364 // The number of characters to keep on either side when scrolling with the mouse
365 "horizontal_scroll_margin": 5,
366 // Scroll sensitivity multiplier. This multiplier is applied
367 // to both the horizontal and vertical delta values while scrolling.
368 "scroll_sensitivity": 1.0,
369 "relative_line_numbers": false,
370 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
371 "search_wrap": true,
372 // Search options to enable by default when opening new project and buffer searches.
373 "search": {
374 "whole_word": false,
375 "case_sensitive": false,
376 "include_ignored": false,
377 "regex": false
378 },
379 // When to populate a new search's query based on the text under the cursor.
380 // This setting can take the following three values:
381 //
382 // 1. Always populate the search query with the word under the cursor (default).
383 // "always"
384 // 2. Only populate the search query when there is text selected
385 // "selection"
386 // 3. Never populate the search query
387 // "never"
388 "seed_search_query_from_cursor": "always",
389 // When enabled, automatically adjusts search case sensitivity based on your query.
390 // If your search query contains any uppercase letters, the search becomes case-sensitive;
391 // if it contains only lowercase letters, the search becomes case-insensitive.
392 "use_smartcase_search": false,
393 // Inlay hint related settings
394 "inlay_hints": {
395 // Global switch to toggle hints on and off, switched off by default.
396 "enabled": false,
397 // Toggle certain types of hints on and off, all switched on by default.
398 "show_type_hints": true,
399 "show_parameter_hints": true,
400 // Corresponds to null/None LSP hint type value.
401 "show_other_hints": true,
402 // Whether to show a background for inlay hints.
403 //
404 // If set to `true`, the background will use the `hint.background` color from the current theme.
405 "show_background": false,
406 // Time to wait after editing the buffer, before requesting the hints,
407 // set to 0 to disable debouncing.
408 "edit_debounce_ms": 700,
409 // Time to wait after scrolling the buffer, before requesting the hints,
410 // set to 0 to disable debouncing.
411 "scroll_debounce_ms": 50,
412 // A set of modifiers which, when pressed, will toggle the visibility of inlay hints.
413 // If the set if empty or not all the modifiers specified are pressed, inlay hints will not be toggled.
414 "toggle_on_modifiers_press": {
415 "control": false,
416 "shift": false,
417 "alt": false,
418 "platform": false,
419 "function": false
420 }
421 },
422 "project_panel": {
423 // Whether to show the project panel button in the status bar
424 "button": true,
425 // Default width of the project panel.
426 "default_width": 240,
427 // Where to dock the project panel. Can be 'left' or 'right'.
428 "dock": "left",
429 // Spacing between worktree entries in the project panel. Can be 'comfortable' or 'standard'.
430 "entry_spacing": "comfortable",
431 // Whether to show file icons in the project panel.
432 "file_icons": true,
433 // Whether to show folder icons or chevrons for directories in the project panel.
434 "folder_icons": true,
435 // Whether to show the git status in the project panel.
436 "git_status": true,
437 // Amount of indentation for nested items.
438 "indent_size": 20,
439 // Whether to reveal it in the project panel automatically,
440 // when a corresponding project entry becomes active.
441 // Gitignored entries are never auto revealed.
442 "auto_reveal_entries": true,
443 // Whether to fold directories automatically and show compact folders
444 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
445 "auto_fold_dirs": true,
446 // Scrollbar-related settings
447 "scrollbar": {
448 // When to show the scrollbar in the project panel.
449 // This setting can take five values:
450 //
451 // 1. null (default): Inherit editor settings
452 // 2. Show the scrollbar if there's important information or
453 // follow the system's configured behavior (default):
454 // "auto"
455 // 3. Match the system's configured behavior:
456 // "system"
457 // 4. Always show the scrollbar:
458 // "always"
459 // 5. Never show the scrollbar:
460 // "never"
461 "show": null
462 },
463 // Which files containing diagnostic errors/warnings to mark in the project panel.
464 // This setting can take the following three values:
465 //
466 // 1. Do not mark any files:
467 // "off"
468 // 2. Only mark files with errors:
469 // "errors"
470 // 3. Mark files with errors and warnings:
471 // "all"
472 "show_diagnostics": "all",
473 // Settings related to indent guides in the project panel.
474 "indent_guides": {
475 // When to show indent guides in the project panel.
476 // This setting can take two values:
477 //
478 // 1. Always show indent guides:
479 // "always"
480 // 2. Never show indent guides:
481 // "never"
482 "show": "always"
483 }
484 },
485 "outline_panel": {
486 // Whether to show the outline panel button in the status bar
487 "button": true,
488 // Default width of the outline panel.
489 "default_width": 300,
490 // Where to dock the outline panel. Can be 'left' or 'right'.
491 "dock": "left",
492 // Whether to show file icons in the outline panel.
493 "file_icons": true,
494 // Whether to show folder icons or chevrons for directories in the outline panel.
495 "folder_icons": true,
496 // Whether to show the git status in the outline panel.
497 "git_status": true,
498 // Amount of indentation for nested items.
499 "indent_size": 20,
500 // Whether to reveal it in the outline panel automatically,
501 // when a corresponding outline entry becomes active.
502 // Gitignored entries are never auto revealed.
503 "auto_reveal_entries": true,
504 // Whether to fold directories automatically
505 // when a directory has only one directory inside.
506 "auto_fold_dirs": true,
507 // Settings related to indent guides in the outline panel.
508 "indent_guides": {
509 // When to show indent guides in the outline panel.
510 // This setting can take two values:
511 //
512 // 1. Always show indent guides:
513 // "always"
514 // 2. Never show indent guides:
515 // "never"
516 "show": "always"
517 },
518 // Scrollbar-related settings
519 "scrollbar": {
520 // When to show the scrollbar in the project panel.
521 // This setting can take five values:
522 //
523 // 1. null (default): Inherit editor settings
524 // 2. Show the scrollbar if there's important information or
525 // follow the system's configured behavior (default):
526 // "auto"
527 // 3. Match the system's configured behavior:
528 // "system"
529 // 4. Always show the scrollbar:
530 // "always"
531 // 5. Never show the scrollbar:
532 // "never"
533 "show": null
534 }
535 },
536 "collaboration_panel": {
537 // Whether to show the collaboration panel button in the status bar.
538 "button": true,
539 // Where to dock the collaboration panel. Can be 'left' or 'right'.
540 "dock": "left",
541 // Default width of the collaboration panel.
542 "default_width": 240
543 },
544 "chat_panel": {
545 // When to show the chat panel button in the status bar.
546 // Can be 'never', 'always', or 'when_in_call',
547 // or a boolean (interpreted as 'never'/'always').
548 "button": "when_in_call",
549 // Where to the chat panel. Can be 'left' or 'right'.
550 "dock": "right",
551 // Default width of the chat panel.
552 "default_width": 240
553 },
554 "git_panel": {
555 // Whether to show the git panel button in the status bar.
556 "button": true,
557 // Where to show the git panel. Can be 'left' or 'right'.
558 "dock": "left",
559 // Default width of the git panel.
560 "default_width": 360,
561 // Style of the git status indicator in the panel.
562 //
563 // Default: icon
564 "status_style": "icon",
565 // What branch name to use if init.defaultBranch
566 // is not set
567 //
568 // Default: main
569 "fallback_branch_name": "main",
570
571 "scrollbar": {
572 // When to show the scrollbar in the git panel.
573 //
574 // Default: inherits editor scrollbar settings
575 "show": null
576 }
577 },
578 "message_editor": {
579 // Whether to automatically replace emoji shortcodes with emoji characters.
580 // For example: typing `:wave:` gets replaced with `👋`.
581 "auto_replace_emoji_shortcode": true
582 },
583 "notification_panel": {
584 // Whether to show the notification panel button in the status bar.
585 "button": true,
586 // Where to dock the notification panel. Can be 'left' or 'right'.
587 "dock": "right",
588 // Default width of the notification panel.
589 "default_width": 380
590 },
591 "assistant": {
592 // Version of this setting.
593 "version": "2",
594 // Whether the assistant is enabled.
595 "enabled": true,
596 // Whether to show the assistant panel button in the status bar.
597 "button": true,
598 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
599 "dock": "right",
600 // Default width when the assistant is docked to the left or right.
601 "default_width": 640,
602 // Default height when the assistant is docked to the bottom.
603 "default_height": 320,
604 // The default model to use when creating new chats.
605 "default_model": {
606 // The provider to use.
607 "provider": "zed.dev",
608 // The model to use.
609 "model": "claude-3-5-sonnet-latest"
610 },
611 // The model to use when applying edits from the assistant.
612 "editor_model": {
613 // The provider to use.
614 "provider": "zed.dev",
615 // The model to use.
616 "model": "claude-3-5-sonnet-latest"
617 },
618 "profiles": {
619 "read-only": {
620 "name": "Read-only",
621 "tools": {
622 "diagnostics": true,
623 "fetch": true,
624 "list-directory": true,
625 "now": true,
626 "path-search": true,
627 "read-file": true,
628 "regex-search": true,
629 "thinking": true
630 }
631 },
632 "code-writer": {
633 "name": "Code Writer",
634 "tools": {
635 "bash": true,
636 "delete-path": true,
637 "diagnostics": true,
638 "edit-files": true,
639 "fetch": true,
640 "list-directory": true,
641 "move-path": true,
642 "now": true,
643 "path-search": true,
644 "read-file": true,
645 "regex-search": true,
646 "thinking": true
647 }
648 }
649 }
650 },
651 // The settings for slash commands.
652 "slash_commands": {
653 // Settings for the `/docs` slash command.
654 "docs": {
655 // Whether `/docs` is enabled.
656 "enabled": false
657 },
658 // Settings for the `/project` slash command.
659 "project": {
660 // Whether `/project` is enabled.
661 "enabled": false
662 }
663 },
664 // Whether the screen sharing icon is shown in the os status bar.
665 "show_call_status_icon": true,
666 // Whether to use language servers to provide code intelligence.
667 "enable_language_server": true,
668 // Whether to perform linked edits of associated ranges, if the language server supports it.
669 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
670 "linked_edits": true,
671 // The list of language servers to use (or disable) for all languages.
672 //
673 // This is typically customized on a per-language basis.
674 "language_servers": ["..."],
675 // When to automatically save edited buffers. This setting can
676 // take four values.
677 //
678 // 1. Never automatically save:
679 // "autosave": "off",
680 // 2. Save when changing focus away from the Zed window:
681 // "autosave": "on_window_change",
682 // 3. Save when changing focus away from a specific buffer:
683 // "autosave": "on_focus_change",
684 // 4. Save when idle for a certain amount of time:
685 // "autosave": { "after_delay": {"milliseconds": 500} },
686 "autosave": "off",
687 // Maximum number of tabs per pane. Unset for unlimited.
688 "max_tabs": null,
689 // Settings related to the editor's tab bar.
690 "tab_bar": {
691 // Whether or not to show the tab bar in the editor
692 "show": true,
693 // Whether or not to show the navigation history buttons.
694 "show_nav_history_buttons": true,
695 // Whether or not to show the tab bar buttons.
696 "show_tab_bar_buttons": true
697 },
698 // Settings related to the editor's tabs
699 "tabs": {
700 // Show git status colors in the editor tabs.
701 "git_status": false,
702 // Position of the close button on the editor tabs.
703 // One of: ["right", "left", "hidden"]
704 "close_position": "right",
705 // Whether to show the file icon for a tab.
706 "file_icons": false,
707 // Controls the appearance behavior of the tab's close button.
708 //
709 // 1. Show it just upon hovering the tab. (default)
710 // "hover"
711 // 2. Show it persistently.
712 // "always"
713 // 3. Never show it, even if hovering it.
714 // "hidden"
715 "show_close_button": "hover",
716 // What to do after closing the current tab.
717 //
718 // 1. Activate the tab that was open previously (default)
719 // "history"
720 // 2. Activate the right neighbour tab if present
721 // "neighbour"
722 // 3. Activate the left neighbour tab if present
723 // "left_neighbour"
724 "activate_on_close": "history",
725 // Which files containing diagnostic errors/warnings to mark in the tabs.
726 // Diagnostics are only shown when file icons are also active.
727 // This setting only works when can take the following three values:
728 //
729 // 1. Do not mark any files:
730 // "off"
731 // 2. Only mark files with errors:
732 // "errors"
733 // 3. Mark files with errors and warnings:
734 // "all"
735 "show_diagnostics": "off"
736 },
737 // Settings related to preview tabs.
738 "preview_tabs": {
739 // Whether preview tabs should be enabled.
740 // Preview tabs allow you to open files in preview mode, where they close automatically
741 // when you switch to another file unless you explicitly pin them.
742 // This is useful for quickly viewing files without cluttering your workspace.
743 "enabled": true,
744 // Whether to open tabs in preview mode when selected from the file finder.
745 "enable_preview_from_file_finder": false,
746 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
747 "enable_preview_from_code_navigation": false
748 },
749 // Settings related to the file finder.
750 "file_finder": {
751 // Whether to show file icons in the file finder.
752 "file_icons": true,
753 // Determines how much space the file finder can take up in relation to the available window width.
754 // There are 5 possible width values:
755 //
756 // 1. Small: This value is essentially a fixed width.
757 // "modal_max_width": "small"
758 // 2. Medium:
759 // "modal_max_width": "medium"
760 // 3. Large:
761 // "modal_max_width": "large"
762 // 4. Extra Large:
763 // "modal_max_width": "xlarge"
764 // 5. Fullscreen: This value removes any horizontal padding, as it consumes the whole viewport width.
765 // "modal_max_width": "full"
766 //
767 // Default: small
768 "modal_max_width": "small"
769 },
770 // Whether or not to remove any trailing whitespace from lines of a buffer
771 // before saving it.
772 "remove_trailing_whitespace_on_save": true,
773 // Whether to start a new line with a comment when a previous line is a comment as well.
774 "extend_comment_on_newline": true,
775 // Removes any lines containing only whitespace at the end of the file and
776 // ensures just one newline at the end.
777 "ensure_final_newline_on_save": true,
778 // Whether or not to perform a buffer format before saving
779 //
780 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
781 "format_on_save": "on",
782 // How to perform a buffer format. This setting can take 4 values:
783 //
784 // 1. Format code using the current language server:
785 // "formatter": "language_server"
786 // 2. Format code using an external command:
787 // "formatter": {
788 // "external": {
789 // "command": "prettier",
790 // "arguments": ["--stdin-filepath", "{buffer_path}"]
791 // }
792 // }
793 // 3. Format code using Zed's Prettier integration:
794 // "formatter": "prettier"
795 // 4. Default. Format files using Zed's Prettier integration (if applicable),
796 // or falling back to formatting via language server:
797 // "formatter": "auto"
798 "formatter": "auto",
799 // How to soft-wrap long lines of text.
800 // Possible values:
801 //
802 // 1. Prefer a single line generally, unless an overly long line is encountered.
803 // "soft_wrap": "none",
804 // "soft_wrap": "prefer_line", // (deprecated, same as "none")
805 // 2. Soft wrap lines that overflow the editor.
806 // "soft_wrap": "editor_width",
807 // 3. Soft wrap lines at the preferred line length.
808 // "soft_wrap": "preferred_line_length",
809 // 4. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
810 // "soft_wrap": "bounded",
811 "soft_wrap": "none",
812 // The column at which to soft-wrap lines, for buffers where soft-wrap
813 // is enabled.
814 "preferred_line_length": 80,
815 // Whether to indent lines using tab characters, as opposed to multiple
816 // spaces.
817 "hard_tabs": false,
818 // How many columns a tab should occupy.
819 "tab_size": 4,
820 // Control what info is collected by Zed.
821 "telemetry": {
822 // Send debug info like crash reports.
823 "diagnostics": true,
824 // Send anonymized usage data like what languages you're using Zed with.
825 "metrics": true
826 },
827 // Automatically update Zed. This setting may be ignored on Linux if
828 // installed through a package manager.
829 "auto_update": true,
830 // Diagnostics configuration.
831 "diagnostics": {
832 // Whether to show warnings or not by default.
833 "include_warnings": true,
834 // Settings for inline diagnostics
835 "inline": {
836 // Whether to show diagnostics inline or not
837 "enabled": false,
838 // The delay in milliseconds to show inline diagnostics after the
839 // last diagnostic update.
840 "update_debounce_ms": 150,
841 // The amount of padding between the end of the source line and the start
842 // of the inline diagnostic in units of em widths.
843 "padding": 4,
844 // The minimum column to display inline diagnostics. This setting can be
845 // used to horizontally align inline diagnostics at some column. Lines
846 // longer than this value will still push diagnostics further to the right.
847 "min_column": 0,
848 // The minimum severity of the diagnostics to show inline.
849 // Shows all diagnostics when not specified.
850 "max_severity": null
851 }
852 },
853 // Files or globs of files that will be excluded by Zed entirely. They will be skipped during file
854 // scans, file searches, and not be displayed in the project file tree. Takes precedence over `file_scan_inclusions`.
855 "file_scan_exclusions": [
856 "**/.git",
857 "**/.svn",
858 "**/.hg",
859 "**/.jj",
860 "**/CVS",
861 "**/.DS_Store",
862 "**/Thumbs.db",
863 "**/.classpath",
864 "**/.settings"
865 ],
866 // Files or globs of files that will be included by Zed, even when ignored by git. This is useful
867 // for files that are not tracked by git, but are still important to your project. Note that globs
868 // that are overly broad can slow down Zed's file scanning. `file_scan_exclusions` takes
869 // precedence over these inclusions.
870 "file_scan_inclusions": [".env*"],
871 // Git gutter behavior configuration.
872 "git": {
873 // Control whether the git gutter is shown. May take 2 values:
874 // 1. Show the gutter
875 // "git_gutter": "tracked_files"
876 // 2. Hide the gutter
877 // "git_gutter": "hide"
878 "git_gutter": "tracked_files",
879 // Control whether the git blame information is shown inline,
880 // in the currently focused line.
881 "inline_blame": {
882 "enabled": true
883 // Sets a delay after which the inline blame information is shown.
884 // Delay is restarted with every cursor movement.
885 // "delay_ms": 600
886 //
887 // Whether or not to display the git commit summary on the same line.
888 // "show_commit_summary": false
889 //
890 // The minimum column number to show the inline blame information at
891 // "min_column": 0
892 },
893 // How git hunks are displayed visually in the editor.
894 // This setting can take two values:
895 //
896 // 1. Show unstaged hunks filled and staged hunks hollow:
897 // "hunk_style": "staged_hollow"
898 // 2. Show unstaged hunks hollow and staged hunks filled:
899 // "hunk_style": "unstaged_hollow"
900 "hunk_style": "staged_hollow"
901 },
902 // The list of custom Git hosting providers.
903 "git_hosting_providers": [
904 // {
905 // "provider": "github",
906 // "name": "BigCorp GitHub",
907 // "base_url": "https://code.big-corp.com"
908 // }
909 ],
910 // Configuration for how direnv configuration should be loaded. May take 2 values:
911 // 1. Load direnv configuration using `direnv export json` directly.
912 // "load_direnv": "direct"
913 // 2. Load direnv configuration through the shell hook, works for POSIX shells and fish.
914 // "load_direnv": "shell_hook"
915 "load_direnv": "direct",
916 "edit_predictions": {
917 // A list of globs representing files that edit predictions should be disabled for.
918 // There's a sensible default list of globs already included.
919 // Any addition to this list will be merged with the default list.
920 // Globs are matched relative to the worktree root,
921 // except when starting with a slash (/) or equivalent in Windows.
922 "disabled_globs": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/.dev.vars", "**/secrets.yml"],
923 // When to show edit predictions previews in buffer.
924 // This setting takes two possible values:
925 // 1. Display predictions inline when there are no language server completions available.
926 // "mode": "eager"
927 // 2. Display predictions inline only when holding a modifier key (alt by default).
928 // "mode": "subtle"
929 "mode": "eager",
930 // Whether edit predictions are enabled in the assistant panel.
931 // This setting has no effect if globally disabled.
932 "enabled_in_assistant": true
933 },
934 // Settings specific to journaling
935 "journal": {
936 // The path of the directory where journal entries are stored
937 "path": "~",
938 // What format to display the hours in
939 // May take 2 values:
940 // 1. hour12
941 // 2. hour24
942 "hour_format": "hour12"
943 },
944 // Settings specific to the terminal
945 "terminal": {
946 // What shell to use when opening a terminal. May take 3 values:
947 // 1. Use the system's default terminal configuration in /etc/passwd
948 // "shell": "system"
949 // 2. A program:
950 // "shell": {
951 // "program": "sh"
952 // }
953 // 3. A program with arguments:
954 // "shell": {
955 // "with_arguments": {
956 // "program": "/bin/bash",
957 // "args": ["--login"]
958 // }
959 // }
960 "shell": "system",
961 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
962 "dock": "bottom",
963 // Default width when the terminal is docked to the left or right.
964 "default_width": 640,
965 // Default height when the terminal is docked to the bottom.
966 "default_height": 320,
967 // What working directory to use when launching the terminal.
968 // May take 4 values:
969 // 1. Use the current file's project directory. Will Fallback to the
970 // first project directory strategy if unsuccessful
971 // "working_directory": "current_project_directory"
972 // 2. Use the first project in this workspace's directory
973 // "working_directory": "first_project_directory"
974 // 3. Always use this platform's home directory (if we can find it)
975 // "working_directory": "always_home"
976 // 4. Always use a specific directory. This value will be shell expanded.
977 // If this path is not a valid directory the terminal will default to
978 // this platform's home directory (if we can find it)
979 // "working_directory": {
980 // "always": {
981 // "directory": "~/zed/projects/"
982 // }
983 // }
984 "working_directory": "current_project_directory",
985 // Set the cursor blinking behavior in the terminal.
986 // May take 3 values:
987 // 1. Never blink the cursor, ignoring the terminal mode
988 // "blinking": "off",
989 // 2. Default the cursor blink to off, but allow the terminal to
990 // set blinking
991 // "blinking": "terminal_controlled",
992 // 3. Always blink the cursor, ignoring the terminal mode
993 // "blinking": "on",
994 "blinking": "terminal_controlled",
995 // Default cursor shape for the terminal.
996 // 1. A block that surrounds the following character
997 // "block"
998 // 2. A vertical bar
999 // "bar"
1000 // 3. An underline / underscore that runs along the following character
1001 // "underline"
1002 // 4. A box drawn around the following character
1003 // "hollow"
1004 //
1005 // Default: not set, defaults to "block"
1006 "cursor_shape": null,
1007 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
1008 // Alternate Scroll mode converts mouse scroll events into up / down key
1009 // presses when in the alternate screen (e.g. when running applications
1010 // like vim or less). The terminal can still set and unset this mode.
1011 // May take 2 values:
1012 // 1. Default alternate scroll mode to on
1013 // "alternate_scroll": "on",
1014 // 2. Default alternate scroll mode to off
1015 // "alternate_scroll": "off",
1016 "alternate_scroll": "on",
1017 // Set whether the option key behaves as the meta key.
1018 // May take 2 values:
1019 // 1. Rely on default platform handling of option key, on macOS
1020 // this means generating certain unicode characters
1021 // "option_as_meta": false,
1022 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
1023 // "option_as_meta": true,
1024 "option_as_meta": false,
1025 // Whether or not selecting text in the terminal will automatically
1026 // copy to the system clipboard.
1027 "copy_on_select": false,
1028 // Whether to show the terminal button in the status bar
1029 "button": true,
1030 // Any key-value pairs added to this list will be added to the terminal's
1031 // environment. Use `:` to separate multiple values.
1032 "env": {
1033 // "KEY": "value1:value2"
1034 },
1035 // Set the terminal's line height.
1036 // May take 3 values:
1037 // 1. Use a line height that's comfortable for reading, 1.618
1038 // "line_height": "comfortable"
1039 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
1040 // particularly if they use box characters
1041 // "line_height": "standard",
1042 // 3. Use a custom line height.
1043 // "line_height": {
1044 // "custom": 2
1045 // },
1046 "line_height": "comfortable",
1047 // Activate the python virtual environment, if one is found, in the
1048 // terminal's working directory (as resolved by the working_directory
1049 // setting). Set this to "off" to disable this behavior.
1050 "detect_venv": {
1051 "on": {
1052 // Default directories to search for virtual environments, relative
1053 // to the current working directory. We recommend overriding this
1054 // in your project's settings, rather than globally.
1055 "directories": [".env", "env", ".venv", "venv"],
1056 // Can also be `csh`, `fish`, `nushell` and `power_shell`
1057 "activate_script": "default"
1058 }
1059 },
1060 "toolbar": {
1061 // Whether to display the terminal title in its toolbar's breadcrumbs.
1062 // Only shown if the terminal title is not empty.
1063 //
1064 // The shell running in the terminal needs to be configured to emit the title.
1065 // Example: `echo -e "\e]2;New Title\007";`
1066 "breadcrumbs": true
1067 },
1068 // Scrollbar-related settings
1069 "scrollbar": {
1070 // When to show the scrollbar in the terminal.
1071 // This setting can take five values:
1072 //
1073 // 1. null (default): Inherit editor settings
1074 // 2. Show the scrollbar if there's important information or
1075 // follow the system's configured behavior (default):
1076 // "auto"
1077 // 3. Match the system's configured behavior:
1078 // "system"
1079 // 4. Always show the scrollbar:
1080 // "always"
1081 // 5. Never show the scrollbar:
1082 // "never"
1083 "show": null
1084 }
1085 // Set the terminal's font size. If this option is not included,
1086 // the terminal will default to matching the buffer's font size.
1087 // "font_size": 15,
1088 // Set the terminal's font family. If this option is not included,
1089 // the terminal will default to matching the buffer's font family.
1090 // "font_family": "Zed Plex Mono",
1091 // Set the terminal's font fallbacks. If this option is not included,
1092 // the terminal will default to matching the buffer's font fallbacks.
1093 // This will be merged with the platform's default font fallbacks
1094 // "font_fallbacks": ["FiraCode Nerd Fonts"],
1095 // Sets the maximum number of lines in the terminal's scrollback buffer.
1096 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
1097 // Existing terminals will not pick up this change until they are recreated.
1098 // "max_scroll_history_lines": 10000,
1099 },
1100 "code_actions_on_format": {},
1101 // Settings related to running tasks.
1102 "tasks": {
1103 "variables": {}
1104 },
1105 // An object whose keys are language names, and whose values
1106 // are arrays of filenames or extensions of files that should
1107 // use those languages.
1108 //
1109 // For example, to treat files like `foo.notjs` as JavaScript,
1110 // and `Embargo.lock` as TOML:
1111 //
1112 // {
1113 // "JavaScript": ["notjs"],
1114 // "TOML": ["Embargo.lock"]
1115 // }
1116 //
1117 "file_types": {
1118 "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "**/.vscode/**/*.json"],
1119 "Shell Script": [".env.*"]
1120 },
1121 // By default use a recent system version of node, or install our own.
1122 // You can override this to use a version of node that is not in $PATH with:
1123 // {
1124 // "node": {
1125 // "path": "/path/to/node"
1126 // "npm_path": "/path/to/npm" (defaults to node_path/../npm)
1127 // }
1128 // }
1129 // or to ensure Zed always downloads and installs an isolated version of node:
1130 // {
1131 // "node": {
1132 // "ignore_system_version": true,
1133 // }
1134 // NOTE: changing this setting currently requires restarting Zed.
1135 "node": {},
1136 // The extensions that Zed should automatically install on startup.
1137 //
1138 // If you don't want any of these extensions, add this field to your settings
1139 // and change the value to `false`.
1140 "auto_install_extensions": {
1141 "html": true
1142 },
1143 // Controls how completions are processed for this language.
1144 "completions": {
1145 // Controls how words are completed.
1146 // For large documents, not all words may be fetched for completion.
1147 //
1148 // May take 3 values:
1149 // 1. "enabled"
1150 // Always fetch document's words for completions along with LSP completions.
1151 // 2. "fallback"
1152 // Only if LSP response errors or times out, use document's words to show completions.
1153 // 3. "disabled"
1154 // Never fetch or complete document's words for completions.
1155 // (Word-based completions can still be queried via a separate action)
1156 //
1157 // Default: fallback
1158 "words": "fallback",
1159 // Whether to fetch LSP completions or not.
1160 //
1161 // Default: true
1162 "lsp": true,
1163 // When fetching LSP completions, determines how long to wait for a response of a particular server.
1164 // When set to 0, waits indefinitely.
1165 //
1166 // Default: 0
1167 "lsp_fetch_timeout_ms": 0
1168 },
1169 // Different settings for specific languages.
1170 "languages": {
1171 "Astro": {
1172 "language_servers": ["astro-language-server", "..."],
1173 "prettier": {
1174 "allowed": true,
1175 "plugins": ["prettier-plugin-astro"]
1176 }
1177 },
1178 "Blade": {
1179 "prettier": {
1180 "allowed": true
1181 }
1182 },
1183 "C": {
1184 "format_on_save": "off",
1185 "use_on_type_format": false,
1186 "prettier": {
1187 "allowed": false
1188 }
1189 },
1190 "C++": {
1191 "format_on_save": "off",
1192 "use_on_type_format": false,
1193 "prettier": {
1194 "allowed": false
1195 }
1196 },
1197 "CSS": {
1198 "prettier": {
1199 "allowed": true
1200 }
1201 },
1202 "Dart": {
1203 "tab_size": 2
1204 },
1205 "Diff": {
1206 "show_edit_predictions": false,
1207 "remove_trailing_whitespace_on_save": false,
1208 "ensure_final_newline_on_save": false
1209 },
1210 "Elixir": {
1211 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1212 },
1213 "Erlang": {
1214 "language_servers": ["erlang-ls", "!elp", "..."]
1215 },
1216 "Git Commit": {
1217 "allow_rewrap": "anywhere"
1218 },
1219 "Go": {
1220 "code_actions_on_format": {
1221 "source.organizeImports": true
1222 }
1223 },
1224 "GraphQL": {
1225 "prettier": {
1226 "allowed": true
1227 }
1228 },
1229 "HEEX": {
1230 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1231 },
1232 "HTML": {
1233 "prettier": {
1234 "allowed": true
1235 }
1236 },
1237 "Java": {
1238 "prettier": {
1239 "allowed": true,
1240 "plugins": ["prettier-plugin-java"]
1241 }
1242 },
1243 "JavaScript": {
1244 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1245 "prettier": {
1246 "allowed": true
1247 }
1248 },
1249 "JSON": {
1250 "prettier": {
1251 "allowed": true
1252 }
1253 },
1254 "JSONC": {
1255 "prettier": {
1256 "allowed": true
1257 }
1258 },
1259 "Markdown": {
1260 "format_on_save": "off",
1261 "use_on_type_format": false,
1262 "allow_rewrap": "anywhere",
1263 "soft_wrap": "editor_width",
1264 "prettier": {
1265 "allowed": true
1266 }
1267 },
1268 "PHP": {
1269 "language_servers": ["phpactor", "!intelephense", "..."],
1270 "prettier": {
1271 "allowed": true,
1272 "plugins": ["@prettier/plugin-php"],
1273 "parser": "php"
1274 }
1275 },
1276 "Plain Text": {
1277 "allow_rewrap": "anywhere"
1278 },
1279 "Ruby": {
1280 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
1281 },
1282 "SCSS": {
1283 "prettier": {
1284 "allowed": true
1285 }
1286 },
1287 "SQL": {
1288 "prettier": {
1289 "allowed": true,
1290 "plugins": ["prettier-plugin-sql"]
1291 }
1292 },
1293 "Starlark": {
1294 "language_servers": ["starpls", "!buck2-lsp", "..."]
1295 },
1296 "Svelte": {
1297 "language_servers": ["svelte-language-server", "..."],
1298 "prettier": {
1299 "allowed": true,
1300 "plugins": ["prettier-plugin-svelte"]
1301 }
1302 },
1303 "TSX": {
1304 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1305 "prettier": {
1306 "allowed": true
1307 }
1308 },
1309 "Twig": {
1310 "prettier": {
1311 "allowed": true
1312 }
1313 },
1314 "TypeScript": {
1315 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1316 "prettier": {
1317 "allowed": true
1318 }
1319 },
1320 "Vue.js": {
1321 "language_servers": ["vue-language-server", "..."],
1322 "prettier": {
1323 "allowed": true
1324 }
1325 },
1326 "XML": {
1327 "prettier": {
1328 "allowed": true,
1329 "plugins": ["@prettier/plugin-xml"]
1330 }
1331 },
1332 "YAML": {
1333 "prettier": {
1334 "allowed": true
1335 }
1336 },
1337 "Zig": {
1338 "language_servers": ["zls", "..."]
1339 }
1340 },
1341 // Different settings for specific language models.
1342 "language_models": {
1343 "anthropic": {
1344 "version": "1",
1345 "api_url": "https://api.anthropic.com"
1346 },
1347 "google": {
1348 "api_url": "https://generativelanguage.googleapis.com"
1349 },
1350 "ollama": {
1351 "api_url": "http://localhost:11434"
1352 },
1353 "openai": {
1354 "version": "1",
1355 "api_url": "https://api.openai.com/v1"
1356 },
1357 "lmstudio": {
1358 "api_url": "http://localhost:1234/api/v0"
1359 },
1360 "deepseek": {
1361 "api_url": "https://api.deepseek.com"
1362 },
1363 "mistral": {
1364 "api_url": "https://api.mistral.ai/v1"
1365 }
1366 },
1367 // Zed's Prettier integration settings.
1368 // Allows to enable/disable formatting with Prettier
1369 // and configure default Prettier, used when no project-level Prettier installation is found.
1370 "prettier": {
1371 // // Whether to consider prettier formatter or not when attempting to format a file.
1372 // "allowed": false,
1373 //
1374 // // Use regular Prettier json configuration.
1375 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1376 // // the project has no other Prettier installed.
1377 // "plugins": [],
1378 //
1379 // // Use regular Prettier json configuration.
1380 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1381 // // the project has no other Prettier installed.
1382 // "trailingComma": "es5",
1383 // "tabWidth": 4,
1384 // "semi": false,
1385 // "singleQuote": true
1386 },
1387 // Settings for auto-closing of JSX tags.
1388 "jsx_tag_auto_close": {
1389 "enabled": true
1390 },
1391 // LSP Specific settings.
1392 "lsp": {
1393 // Specify the LSP name as a key here.
1394 // "rust-analyzer": {
1395 // // These initialization options are merged into Zed's defaults
1396 // "initialization_options": {
1397 // "check": {
1398 // "command": "clippy" // rust-analyzer.check.command (default: "check")
1399 // }
1400 // }
1401 // }
1402 },
1403 // Jupyter settings
1404 "jupyter": {
1405 "enabled": true
1406 // Specify the language name as the key and the kernel name as the value.
1407 // "kernel_selections": {
1408 // "python": "conda-base"
1409 // "typescript": "deno"
1410 // }
1411 },
1412 // Vim settings
1413 "vim": {
1414 "default_mode": "normal",
1415 "toggle_relative_line_numbers": false,
1416 "use_system_clipboard": "always",
1417 "use_multiline_find": false,
1418 "use_smartcase_find": false,
1419 "highlight_on_yank_duration": 200,
1420 "custom_digraphs": {}
1421 },
1422 // The server to connect to. If the environment variable
1423 // ZED_SERVER_URL is set, it will override this setting.
1424 "server_url": "https://zed.dev",
1425 // Settings overrides to use when using Zed Preview.
1426 // Mostly useful for developers who are managing multiple instances of Zed.
1427 "preview": {
1428 // "theme": "Andromeda"
1429 },
1430 // Settings overrides to use when using Zed Nightly.
1431 // Mostly useful for developers who are managing multiple instances of Zed.
1432 "nightly": {
1433 // "theme": "Andromeda"
1434 },
1435 // Settings overrides to use when using Zed Stable.
1436 // Mostly useful for developers who are managing multiple instances of Zed.
1437 "stable": {
1438 // "theme": "Andromeda"
1439 },
1440 // Settings overrides to use when using Zed Dev.
1441 // Mostly useful for developers who are managing multiple instances of Zed.
1442 "dev": {
1443 // "theme": "Andromeda"
1444 },
1445 // Task-related settings.
1446 "task": {
1447 // Whether to show task status indicator in the status bar. Default: true
1448 "show_status_indicator": true
1449 },
1450 // Whether to show full labels in line indicator or short ones
1451 //
1452 // Values:
1453 // - `short`: "2 s, 15 l, 32 c"
1454 // - `long`: "2 selections, 15 lines, 32 characters"
1455 // Default: long
1456 "line_indicator_format": "long",
1457 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1458 //
1459 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1460 // `socks5h`. `http` will be used when no scheme is specified.
1461 //
1462 // By default no proxy will be used, or Zed will try get proxy settings from
1463 // environment variables.
1464 //
1465 // Examples:
1466 // - "proxy": "socks5h://localhost:10808"
1467 // - "proxy": "http://127.0.0.1:10809"
1468 "proxy": null,
1469 // Set to configure aliases for the command palette.
1470 // When typing a query which is a key of this object, the value will be used instead.
1471 //
1472 // Examples:
1473 // {
1474 // "W": "workspace::Save"
1475 // }
1476 "command_aliases": {},
1477 // Whether to show user picture in titlebar.
1478 "show_user_picture": true,
1479 // ssh_connections is an array of ssh connections.
1480 // You can configure these from `project: Open Remote` in the command palette.
1481 // Zed's ssh support will pull configuration from your ~/.ssh too.
1482 // Examples:
1483 // [
1484 // {
1485 // "host": "example-box",
1486 // // "port": 22, "username": "test", "args": ["-i", "/home/user/.ssh/id_rsa"]
1487 // "projects": [
1488 // {
1489 // "paths": ["/home/user/code/zed"]
1490 // }
1491 // ]
1492 // }
1493 // ]
1494 "ssh_connections": [],
1495
1496 // Configures context servers for use in the Assistant.
1497 "context_servers": {},
1498 "debugger": {
1499 "stepping_granularity": "line",
1500 "save_breakpoints": true,
1501 "button": true
1502 }
1503}