1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 // The name of a base set of key bindings to use.
14 // This setting can take four values, each named after another
15 // text editor:
16 //
17 // 1. "VSCode"
18 // 2. "JetBrains"
19 // 3. "SublimeText"
20 // 4. "Atom"
21 "base_keymap": "VSCode",
22 // Features that can be globally enabled or disabled
23 "features": {
24 // Which inline completion provider to use.
25 "inline_completion_provider": "copilot"
26 },
27 // The name of a font to use for rendering text in the editor
28 "buffer_font_family": "Zed Plex Mono",
29 // The OpenType features to enable for text in the editor.
30 "buffer_font_features": {
31 // Disable ligatures:
32 // "calt": false
33 },
34 // The default font size for text in the editor
35 "buffer_font_size": 15,
36 // The weight of the editor font in standard CSS units from 100 to 900.
37 "buffer_font_weight": 400,
38 // Set the buffer's line height.
39 // May take 3 values:
40 // 1. Use a line height that's comfortable for reading (1.618)
41 // "buffer_line_height": "comfortable"
42 // 2. Use a standard line height, (1.3)
43 // "buffer_line_height": "standard",
44 // 3. Use a custom line height
45 // "buffer_line_height": {
46 // "custom": 2
47 // },
48 "buffer_line_height": "comfortable",
49 // The name of a font to use for rendering text in the UI
50 // (On macOS) You can set this to ".SystemUIFont" to use the system font
51 "ui_font_family": "Zed Plex Sans",
52 // The OpenType features to enable for text in the UI
53 "ui_font_features": {
54 // Disable ligatures:
55 "calt": false
56 },
57 // The weight of the UI font in standard CSS units from 100 to 900.
58 "ui_font_weight": 400,
59 // The default font size for text in the UI
60 "ui_font_size": 16,
61 // The factor to grow the active pane by. Defaults to 1.0
62 // which gives the same size as all other panes.
63 "active_pane_magnification": 1.0,
64 // Centered layout related settings.
65 "centered_layout": {
66 // The relative width of the left padding of the central pane from the
67 // workspace when the centered layout is used.
68 "left_padding": 0.2,
69 // The relative width of the right padding of the central pane from the
70 // workspace when the centered layout is used.
71 "right_padding": 0.2
72 },
73 // The key to use for adding multiple cursors
74 // Currently "alt" or "cmd_or_ctrl" (also aliased as
75 // "cmd" and "ctrl") are supported.
76 "multi_cursor_modifier": "alt",
77 // Whether to enable vim modes and key bindings.
78 "vim_mode": false,
79 // Whether to show the informational hover box when moving the mouse
80 // over symbols in the editor.
81 "hover_popover_enabled": true,
82 // Whether to confirm before quitting Zed.
83 "confirm_quit": false,
84 // Whether to restore last closed project when fresh Zed instance is opened.
85 "restore_on_startup": "last_session",
86 // Size of the drop target in the editor.
87 "drop_target_size": 0.2,
88 // Whether the window should be closed when using 'close active item' on a window with no tabs.
89 // May take 3 values:
90 // 1. Use the current platform's convention
91 // "when_closing_with_no_tabs": "platform_default"
92 // 2. Always close the window:
93 // "when_closing_with_no_tabs": "close_window",
94 // 3. Never close the window
95 // "when_closing_with_no_tabs": "keep_window_open",
96 "when_closing_with_no_tabs": "platform_default",
97 // Whether to use the system provided dialogs for Open and Save As.
98 // When set to false, Zed will use the built-in keyboard-first pickers.
99 "use_system_path_prompts": true,
100 // Whether the cursor blinks in the editor.
101 "cursor_blink": true,
102 // How to highlight the current line in the editor.
103 //
104 // 1. Don't highlight the current line:
105 // "none"
106 // 2. Highlight the gutter area:
107 // "gutter"
108 // 3. Highlight the editor area:
109 // "line"
110 // 4. Highlight the full line (default):
111 // "all"
112 "current_line_highlight": "all",
113 // Whether to pop the completions menu while typing in an editor without
114 // explicitly requesting it.
115 "show_completions_on_input": true,
116 // Whether to display inline and alongside documentation for items in the
117 // completions menu
118 "show_completion_documentation": true,
119 // The debounce delay before re-querying the language server for completion
120 // documentation when not included in original completion list.
121 "completion_documentation_secondary_query_debounce": 300,
122 // Show method signatures in the editor, when inside parentheses.
123 "auto_signature_help": false,
124 /// Whether to show the signature help after completion or a bracket pair inserted.
125 /// If `auto_signature_help` is enabled, this setting will be treated as enabled also.
126 "show_signature_help_after_edits": true,
127 // Whether to show wrap guides (vertical rulers) in the editor.
128 // Setting this to true will show a guide at the 'preferred_line_length' value
129 // if softwrap is set to 'preferred_line_length', and will show any
130 // additional guides as specified by the 'wrap_guides' setting.
131 "show_wrap_guides": true,
132 // Character counts at which to show wrap guides in the editor.
133 "wrap_guides": [],
134 // Hide the values of in variables from visual display in private files
135 "redact_private_values": false,
136 // The default number of lines to expand excerpts in the multibuffer by.
137 "expand_excerpt_lines": 3,
138 // Globs to match against file paths to determine if a file is private.
139 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
140 // Whether to use additional LSP queries to format (and amend) the code after
141 // every "trigger" symbol input, defined by LSP server capabilities.
142 "use_on_type_format": true,
143 // Whether to automatically add matching closing characters when typing
144 // opening parenthesis, bracket, brace, single or double quote characters.
145 // For example, when you type (, Zed will add a closing ) at the correct position.
146 "use_autoclose": true,
147 // Whether to automatically surround selected text when typing opening parenthesis,
148 // bracket, brace, single or double quote characters.
149 // For example, when you select text and type (, Zed will surround the text with ().
150 "use_auto_surround": true,
151 // Controls how the editor handles the autoclosed characters.
152 // When set to `false`(default), skipping over and auto-removing of the closing characters
153 // happen only for auto-inserted characters.
154 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
155 // no matter how they were inserted.
156 "always_treat_brackets_as_autoclosed": false,
157 // Controls whether inline completions are shown immediately (true)
158 // or manually by triggering `editor::ShowInlineCompletion` (false).
159 "show_inline_completions": true,
160 // Whether to show tabs and spaces in the editor.
161 // This setting can take three values:
162 //
163 // 1. Draw tabs and spaces only for the selected text (default):
164 // "selection"
165 // 2. Do not draw any tabs or spaces:
166 // "none"
167 // 3. Draw all invisible symbols:
168 // "all"
169 // 4. Draw whitespaces at boundaries only:
170 // "boundary"
171 // For a whitespace to be on a boundary, any of the following conditions need to be met:
172 // - It is a tab
173 // - It is adjacent to an edge (start or end)
174 // - It is adjacent to a whitespace (left or right)
175 "show_whitespaces": "selection",
176 // Settings related to calls in Zed
177 "calls": {
178 // Join calls with the microphone live by default
179 "mute_on_join": false,
180 // Share your project when you are the first to join a channel
181 "share_on_join": false
182 },
183 // Toolbar related settings
184 "toolbar": {
185 // Whether to show breadcrumbs.
186 "breadcrumbs": true,
187 // Whether to show quick action buttons.
188 "quick_actions": true,
189 // Whether to show the Selections menu in the editor toolbar
190 "selections_menu": true
191 },
192 // Scrollbar related settings
193 "scrollbar": {
194 // When to show the scrollbar in the editor.
195 // This setting can take four values:
196 //
197 // 1. Show the scrollbar if there's important information or
198 // follow the system's configured behavior (default):
199 // "auto"
200 // 2. Match the system's configured behavior:
201 // "system"
202 // 3. Always show the scrollbar:
203 // "always"
204 // 4. Never show the scrollbar:
205 // "never"
206 "show": "auto",
207 // Whether to show cursor positions in the scrollbar.
208 "cursors": true,
209 // Whether to show git diff indicators in the scrollbar.
210 "git_diff": true,
211 // Whether to show buffer search results in the scrollbar.
212 "search_results": true,
213 // Whether to show selected symbol occurrences in the scrollbar.
214 "selected_symbol": true,
215 // Whether to show diagnostic indicators in the scrollbar.
216 "diagnostics": true
217 },
218 // What to do when multibuffer is double clicked in some of its excerpts
219 // (parts of singleton buffers).
220 // May take 2 values:
221 // 1. Behave as a regular buffer and select the whole word (default).
222 // "double_click_in_multibuffer": "select"
223 // 2. Open the excerpt clicked as a new buffer in the new tab.
224 // "double_click_in_multibuffer": "open",
225 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
226 "double_click_in_multibuffer": "select",
227 "gutter": {
228 // Whether to show line numbers in the gutter.
229 "line_numbers": true,
230 // Whether to show code action buttons in the gutter.
231 "code_actions": true,
232 // Whether to show runnables buttons in the gutter.
233 "runnables": true,
234 // Whether to show fold buttons in the gutter.
235 "folds": true
236 },
237 "indent_guides": {
238 /// Whether to show indent guides in the editor.
239 "enabled": true,
240 /// The width of the indent guides in pixels, between 1 and 10.
241 "line_width": 1,
242 /// The width of the active indent guide in pixels, between 1 and 10.
243 "active_line_width": 1,
244 /// Determines how indent guides are colored.
245 /// This setting can take the following three values:
246 ///
247 /// 1. "disabled"
248 /// 2. "fixed"
249 /// 3. "indent_aware"
250 "coloring": "fixed",
251 /// Determines how indent guide backgrounds are colored.
252 /// This setting can take the following two values:
253 ///
254 /// 1. "disabled"
255 /// 2. "indent_aware"
256 "background_coloring": "disabled"
257 },
258 // Whether the editor will scroll beyond the last line.
259 "scroll_beyond_last_line": "one_page",
260 // The number of lines to keep above/below the cursor when scrolling.
261 "vertical_scroll_margin": 3,
262 // Scroll sensitivity multiplier. This multiplier is applied
263 // to both the horizontal and vertical delta values while scrolling.
264 "scroll_sensitivity": 1.0,
265 "relative_line_numbers": false,
266 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
267 "search_wrap": true,
268 // When to populate a new search's query based on the text under the cursor.
269 // This setting can take the following three values:
270 //
271 // 1. Always populate the search query with the word under the cursor (default).
272 // "always"
273 // 2. Only populate the search query when there is text selected
274 // "selection"
275 // 3. Never populate the search query
276 // "never"
277 "seed_search_query_from_cursor": "always",
278 // Inlay hint related settings
279 "inlay_hints": {
280 // Global switch to toggle hints on and off, switched off by default.
281 "enabled": false,
282 // Toggle certain types of hints on and off, all switched on by default.
283 "show_type_hints": true,
284 "show_parameter_hints": true,
285 // Corresponds to null/None LSP hint type value.
286 "show_other_hints": true,
287 // Time to wait after editing the buffer, before requesting the hints,
288 // set to 0 to disable debouncing.
289 "edit_debounce_ms": 700,
290 // Time to wait after scrolling the buffer, before requesting the hints,
291 // set to 0 to disable debouncing.
292 "scroll_debounce_ms": 50
293 },
294 "project_panel": {
295 // Whether to show the project panel button in the status bar
296 "button": true,
297 // Default width of the project panel.
298 "default_width": 240,
299 // Where to dock the project panel. Can be 'left' or 'right'.
300 "dock": "left",
301 // Whether to show file icons in the project panel.
302 "file_icons": true,
303 // Whether to show folder icons or chevrons for directories in the project panel.
304 "folder_icons": true,
305 // Whether to show the git status in the project panel.
306 "git_status": true,
307 // Amount of indentation for nested items.
308 "indent_size": 20,
309 // Whether to reveal it in the project panel automatically,
310 // when a corresponding project entry becomes active.
311 // Gitignored entries are never auto revealed.
312 "auto_reveal_entries": true,
313 // Whether to fold directories automatically and show compact folders
314 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
315 "auto_fold_dirs": false,
316 /// Scrollbar-related settings
317 "scrollbar": {
318 /// When to show the scrollbar in the project panel.
319 ///
320 /// Default: always
321 "show": "always"
322 }
323 },
324 "outline_panel": {
325 // Whether to show the outline panel button in the status bar
326 "button": true,
327 // Default width of the outline panel.
328 "default_width": 300,
329 // Where to dock the outline panel. Can be 'left' or 'right'.
330 "dock": "left",
331 // Whether to show file icons in the outline panel.
332 "file_icons": true,
333 // Whether to show folder icons or chevrons for directories in the outline panel.
334 "folder_icons": true,
335 // Whether to show the git status in the outline panel.
336 "git_status": true,
337 // Amount of indentation for nested items.
338 "indent_size": 20,
339 // Whether to reveal it in the outline panel automatically,
340 // when a corresponding outline entry becomes active.
341 // Gitignored entries are never auto revealed.
342 "auto_reveal_entries": true,
343 /// Whether to fold directories automatically
344 /// when a directory has only one directory inside.
345 "auto_fold_dirs": true
346 },
347 "collaboration_panel": {
348 // Whether to show the collaboration panel button in the status bar.
349 "button": true,
350 // Where to dock the collaboration panel. Can be 'left' or 'right'.
351 "dock": "left",
352 // Default width of the collaboration panel.
353 "default_width": 240
354 },
355 "chat_panel": {
356 // Whether to show the chat panel button in the status bar.
357 "button": true,
358 // Where to the chat panel. Can be 'left' or 'right'.
359 "dock": "right",
360 // Default width of the chat panel.
361 "default_width": 240
362 },
363 "message_editor": {
364 // Whether to automatically replace emoji shortcodes with emoji characters.
365 // For example: typing `:wave:` gets replaced with `👋`.
366 "auto_replace_emoji_shortcode": true
367 },
368 "notification_panel": {
369 // Whether to show the notification panel button in the status bar.
370 "button": true,
371 // Where to dock the notification panel. Can be 'left' or 'right'.
372 "dock": "right",
373 // Default width of the notification panel.
374 "default_width": 380
375 },
376 "assistant": {
377 // Version of this setting.
378 "version": "2",
379 // Whether the assistant is enabled.
380 "enabled": true,
381 // Whether to show the assistant panel button in the status bar.
382 "button": true,
383 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
384 "dock": "right",
385 // Default width when the assistant is docked to the left or right.
386 "default_width": 640,
387 // Default height when the assistant is docked to the bottom.
388 "default_height": 320,
389 // The default model to use when creating new contexts.
390 "default_model": {
391 // The provider to use.
392 "provider": "openai",
393 // The model to use.
394 "model": "gpt-4o"
395 }
396 },
397 // Whether the screen sharing icon is shown in the os status bar.
398 "show_call_status_icon": true,
399 // Whether to use language servers to provide code intelligence.
400 "enable_language_server": true,
401 // Whether to perform linked edits of associated ranges, if the language server supports it.
402 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
403 "linked_edits": true,
404 // The list of language servers to use (or disable) for all languages.
405 //
406 // This is typically customized on a per-language basis.
407 "language_servers": ["..."],
408 // When to automatically save edited buffers. This setting can
409 // take four values.
410 //
411 // 1. Never automatically save:
412 // "autosave": "off",
413 // 2. Save when changing focus away from the Zed window:
414 // "autosave": "on_window_change",
415 // 3. Save when changing focus away from a specific buffer:
416 // "autosave": "on_focus_change",
417 // 4. Save when idle for a certain amount of time:
418 // "autosave": { "after_delay": {"milliseconds": 500} },
419 "autosave": "off",
420 // Settings related to the editor's tab bar.
421 "tab_bar": {
422 // Whether or not to show the tab bar in the editor
423 "show": true,
424 // Whether or not to show the navigation history buttons.
425 "show_nav_history_buttons": true
426 },
427 // Settings related to the editor's tabs
428 "tabs": {
429 // Show git status colors in the editor tabs.
430 "git_status": false,
431 // Position of the close button on the editor tabs.
432 "close_position": "right",
433 // Whether to show the file icon for a tab.
434 "file_icons": false
435 },
436 // Settings related to preview tabs.
437 "preview_tabs": {
438 // Whether preview tabs should be enabled.
439 // Preview tabs allow you to open files in preview mode, where they close automatically
440 // when you switch to another file unless you explicitly pin them.
441 // This is useful for quickly viewing files without cluttering your workspace.
442 "enabled": true,
443 // Whether to open tabs in preview mode when selected from the file finder.
444 "enable_preview_from_file_finder": false,
445 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
446 "enable_preview_from_code_navigation": false
447 },
448 // Whether or not to remove any trailing whitespace from lines of a buffer
449 // before saving it.
450 "remove_trailing_whitespace_on_save": true,
451 // Whether to start a new line with a comment when a previous line is a comment as well.
452 "extend_comment_on_newline": true,
453 // Whether or not to ensure there's a single newline at the end of a buffer
454 // when saving it.
455 "ensure_final_newline_on_save": true,
456 // Whether or not to perform a buffer format before saving
457 //
458 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
459 "format_on_save": "on",
460 // How to perform a buffer format. This setting can take 4 values:
461 //
462 // 1. Format code using the current language server:
463 // "formatter": "language_server"
464 // 2. Format code using an external command:
465 // "formatter": {
466 // "external": {
467 // "command": "prettier",
468 // "arguments": ["--stdin-filepath", "{buffer_path}"]
469 // }
470 // }
471 // 3. Format code using Zed's Prettier integration:
472 // "formatter": "prettier"
473 // 4. Default. Format files using Zed's Prettier integration (if applicable),
474 // or falling back to formatting via language server:
475 // "formatter": "auto"
476 "formatter": "auto",
477 // How to soft-wrap long lines of text.
478 // Possible values:
479 //
480 // 1. Do not soft wrap.
481 // "soft_wrap": "none",
482 // 2. Prefer a single line generally, unless an overly long line is encountered.
483 // "soft_wrap": "prefer_line",
484 // 3. Soft wrap lines that overflow the editor.
485 // "soft_wrap": "editor_width",
486 // 4. Soft wrap lines at the preferred line length.
487 // "soft_wrap": "preferred_line_length",
488 "soft_wrap": "prefer_line",
489 // The column at which to soft-wrap lines, for buffers where soft-wrap
490 // is enabled.
491 "preferred_line_length": 80,
492 // Whether to indent lines using tab characters, as opposed to multiple
493 // spaces.
494 "hard_tabs": false,
495 // How many columns a tab should occupy.
496 "tab_size": 4,
497 // Control what info is collected by Zed.
498 "telemetry": {
499 // Send debug info like crash reports.
500 "diagnostics": true,
501 // Send anonymized usage data like what languages you're using Zed with.
502 "metrics": true
503 },
504 // Automatically update Zed. This setting may be ignored on Linux if
505 // installed through a package manager.
506 "auto_update": true,
507 // Diagnostics configuration.
508 "diagnostics": {
509 // Whether to show warnings or not by default.
510 "include_warnings": true
511 },
512 // Add files or globs of files that will be excluded by Zed entirely:
513 // they will be skipped during FS scan(s), file tree and file search
514 // will lack the corresponding file entries.
515 "file_scan_exclusions": [
516 "**/.git",
517 "**/.svn",
518 "**/.hg",
519 "**/CVS",
520 "**/.DS_Store",
521 "**/Thumbs.db",
522 "**/.classpath",
523 "**/.settings"
524 ],
525 // Git gutter behavior configuration.
526 "git": {
527 // Control whether the git gutter is shown. May take 2 values:
528 // 1. Show the gutter
529 // "git_gutter": "tracked_files"
530 // 2. Hide the gutter
531 // "git_gutter": "hide"
532 "git_gutter": "tracked_files",
533 // Control whether the git blame information is shown inline,
534 // in the currently focused line.
535 "inline_blame": {
536 "enabled": true
537 // Sets a delay after which the inline blame information is shown.
538 // Delay is restarted with every cursor movement.
539 // "delay_ms": 600
540 }
541 },
542 // Configuration for how direnv configuration should be loaded. May take 2 values:
543 // 1. Load direnv configuration through the shell hook, works for POSIX shells and fish.
544 // "load_direnv": "shell_hook"
545 // 2. Load direnv configuration using `direnv export json` directly.
546 // This can help with some shells that otherwise would not detect
547 // the direnv environment, such as nushell or elvish.
548 // "load_direnv": "direct"
549 "load_direnv": "shell_hook",
550 "inline_completions": {
551 // A list of globs representing files that inline completions should be disabled for.
552 "disabled_globs": [".env"]
553 },
554 // Settings specific to journaling
555 "journal": {
556 // The path of the directory where journal entries are stored
557 "path": "~",
558 // What format to display the hours in
559 // May take 2 values:
560 // 1. hour12
561 // 2. hour24
562 "hour_format": "hour12"
563 },
564 // Settings specific to the terminal
565 "terminal": {
566 // What shell to use when opening a terminal. May take 3 values:
567 // 1. Use the system's default terminal configuration in /etc/passwd
568 // "shell": "system"
569 // 2. A program:
570 // "shell": {
571 // "program": "sh"
572 // }
573 // 3. A program with arguments:
574 // "shell": {
575 // "with_arguments": {
576 // "program": "/bin/bash",
577 // "arguments": ["--login"]
578 // }
579 // }
580 "shell": "system",
581 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
582 "dock": "bottom",
583 // Default width when the terminal is docked to the left or right.
584 "default_width": 640,
585 // Default height when the terminal is docked to the bottom.
586 "default_height": 320,
587 // What working directory to use when launching the terminal.
588 // May take 4 values:
589 // 1. Use the current file's project directory. Will Fallback to the
590 // first project directory strategy if unsuccessful
591 // "working_directory": "current_project_directory"
592 // 2. Use the first project in this workspace's directory
593 // "working_directory": "first_project_directory"
594 // 3. Always use this platform's home directory (if we can find it)
595 // "working_directory": "always_home"
596 // 4. Always use a specific directory. This value will be shell expanded.
597 // If this path is not a valid directory the terminal will default to
598 // this platform's home directory (if we can find it)
599 // "working_directory": {
600 // "always": {
601 // "directory": "~/zed/projects/"
602 // }
603 // }
604 "working_directory": "current_project_directory",
605 // Set the cursor blinking behavior in the terminal.
606 // May take 3 values:
607 // 1. Never blink the cursor, ignoring the terminal mode
608 // "blinking": "off",
609 // 2. Default the cursor blink to off, but allow the terminal to
610 // set blinking
611 // "blinking": "terminal_controlled",
612 // 3. Always blink the cursor, ignoring the terminal mode
613 // "blinking": "on",
614 "blinking": "terminal_controlled",
615 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
616 // Alternate Scroll mode converts mouse scroll events into up / down key
617 // presses when in the alternate screen (e.g. when running applications
618 // like vim or less). The terminal can still set and unset this mode.
619 // May take 2 values:
620 // 1. Default alternate scroll mode to on
621 // "alternate_scroll": "on",
622 // 2. Default alternate scroll mode to off
623 // "alternate_scroll": "off",
624 "alternate_scroll": "off",
625 // Set whether the option key behaves as the meta key.
626 // May take 2 values:
627 // 1. Rely on default platform handling of option key, on macOS
628 // this means generating certain unicode characters
629 // "option_to_meta": false,
630 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
631 // "option_to_meta": true,
632 "option_as_meta": false,
633 // Whether or not selecting text in the terminal will automatically
634 // copy to the system clipboard.
635 "copy_on_select": false,
636 // Whether to show the terminal button in the status bar
637 "button": true,
638 // Any key-value pairs added to this list will be added to the terminal's
639 // environment. Use `:` to separate multiple values.
640 "env": {
641 // "KEY": "value1:value2"
642 },
643 // Set the terminal's line height.
644 // May take 3 values:
645 // 1. Use a line height that's comfortable for reading, 1.618
646 // "line_height": "comfortable"
647 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
648 // particularly if they use box characters
649 // "line_height": "standard",
650 // 3. Use a custom line height.
651 // "line_height": {
652 // "custom": 2
653 // },
654 "line_height": "comfortable",
655 // Activate the python virtual environment, if one is found, in the
656 // terminal's working directory (as resolved by the working_directory
657 // setting). Set this to "off" to disable this behavior.
658 "detect_venv": {
659 "on": {
660 // Default directories to search for virtual environments, relative
661 // to the current working directory. We recommend overriding this
662 // in your project's settings, rather than globally.
663 "directories": [".env", "env", ".venv", "venv"],
664 // Can also be `csh`, `fish`, and `nushell`
665 "activate_script": "default"
666 }
667 },
668 "toolbar": {
669 // Whether to display the terminal title in its toolbar.
670 "title": true
671 }
672 // Set the terminal's font size. If this option is not included,
673 // the terminal will default to matching the buffer's font size.
674 // "font_size": 15,
675 // Set the terminal's font family. If this option is not included,
676 // the terminal will default to matching the buffer's font family.
677 // "font_family": "Zed Plex Mono",
678 // Sets the maximum number of lines in the terminal's scrollback buffer.
679 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
680 // Existing terminals will not pick up this change until they are recreated.
681 // "max_scroll_history_lines": 10000,
682 },
683 "code_actions_on_format": {},
684 /// Settings related to running tasks.
685 "tasks": {
686 "variables": {}
687 },
688 // An object whose keys are language names, and whose values
689 // are arrays of filenames or extensions of files that should
690 // use those languages.
691 //
692 // For example, to treat files like `foo.notjs` as JavaScript,
693 // and `Embargo.lock` as TOML:
694 //
695 // {
696 // "JavaScript": ["notjs"],
697 // "TOML": ["Embargo.lock"]
698 // }
699 //
700 "file_types": {
701 "JSON": ["flake.lock"],
702 "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "tsconfig.json"]
703 },
704 // The extensions that Zed should automatically install on startup.
705 //
706 // If you don't want any of these extensions, add this field to your settings
707 // and change the value to `false`.
708 "auto_install_extensions": {
709 "html": true
710 },
711 // Different settings for specific languages.
712 "languages": {
713 "Astro": {
714 "prettier": {
715 "allowed": true,
716 "plugins": ["prettier-plugin-astro"]
717 }
718 },
719 "Blade": {
720 "prettier": {
721 "allowed": true
722 }
723 },
724 "C": {
725 "format_on_save": "off",
726 "use_on_type_format": false
727 },
728 "C++": {
729 "format_on_save": "off",
730 "use_on_type_format": false
731 },
732 "CSS": {
733 "prettier": {
734 "allowed": true
735 }
736 },
737 "Elixir": {
738 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
739 },
740 "Erlang": {
741 "language_servers": ["erlang-ls", "!elp", "..."]
742 },
743 "Go": {
744 "code_actions_on_format": {
745 "source.organizeImports": true
746 }
747 },
748 "GraphQL": {
749 "prettier": {
750 "allowed": true
751 }
752 },
753 "HEEX": {
754 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
755 },
756 "HTML": {
757 "prettier": {
758 "allowed": true
759 }
760 },
761 "Java": {
762 "prettier": {
763 "allowed": true,
764 "plugins": ["prettier-plugin-java"]
765 }
766 },
767 "JavaScript": {
768 "language_servers": ["!typescript-language-server", "vtsls", "..."],
769 "prettier": {
770 "allowed": true
771 }
772 },
773 "JSON": {
774 "prettier": {
775 "allowed": true
776 }
777 },
778 "JSONC": {
779 "prettier": {
780 "allowed": true
781 }
782 },
783 "Markdown": {
784 "format_on_save": "off",
785 "use_on_type_format": false,
786 "prettier": {
787 "allowed": true
788 }
789 },
790 "PHP": {
791 "language_servers": ["phpactor", "!intelephense", "..."],
792 "prettier": {
793 "allowed": true,
794 "plugins": ["@prettier/plugin-php"],
795 "parser": "php"
796 }
797 },
798 "Ruby": {
799 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
800 },
801 "SCSS": {
802 "prettier": {
803 "allowed": true
804 }
805 },
806 "SQL": {
807 "prettier": {
808 "allowed": true,
809 "plugins": ["prettier-plugin-sql"]
810 }
811 },
812 "Starlark": {
813 "language_servers": ["starpls", "!buck2-lsp", "..."]
814 },
815 "Svelte": {
816 "prettier": {
817 "allowed": true,
818 "plugins": ["prettier-plugin-svelte"]
819 }
820 },
821 "TSX": {
822 "language_servers": ["!typescript-language-server", "vtsls", "..."],
823 "prettier": {
824 "allowed": true
825 }
826 },
827 "Twig": {
828 "prettier": {
829 "allowed": true
830 }
831 },
832 "TypeScript": {
833 "language_servers": ["!typescript-language-server", "vtsls", "..."],
834 "prettier": {
835 "allowed": true
836 }
837 },
838 "Vue.js": {
839 "prettier": {
840 "allowed": true
841 }
842 },
843 "XML": {
844 "prettier": {
845 "allowed": true,
846 "plugins": ["@prettier/plugin-xml"]
847 }
848 },
849 "YAML": {
850 "prettier": {
851 "allowed": true
852 }
853 }
854 },
855 // Different settings for specific language models.
856 "language_models": {
857 "anthropic": {
858 "api_url": "https://api.anthropic.com"
859 },
860 "openai": {
861 "api_url": "https://api.openai.com/v1"
862 },
863 "ollama": {
864 "api_url": "http://localhost:11434"
865 }
866 },
867 // Zed's Prettier integration settings.
868 // Allows to enable/disable formatting with Prettier
869 // and configure default Prettier, used when no project-level Prettier installation is found.
870 "prettier": {
871 // // Whether to consider prettier formatter or not when attempting to format a file.
872 // "allowed": false,
873 //
874 // // Use regular Prettier json configuration.
875 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
876 // // the project has no other Prettier installed.
877 // "plugins": [],
878 //
879 // // Use regular Prettier json configuration.
880 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
881 // // the project has no other Prettier installed.
882 // "trailingComma": "es5",
883 // "tabWidth": 4,
884 // "semi": false,
885 // "singleQuote": true
886 },
887 // LSP Specific settings.
888 "lsp": {
889 // Specify the LSP name as a key here.
890 // "rust-analyzer": {
891 // // These initialization options are merged into Zed's defaults
892 // "initialization_options": {
893 // "check": {
894 // "command": "clippy" // rust-analyzer.check.command (default: "check")
895 // }
896 // }
897 // }
898 },
899 // Jupyter settings
900 "jupyter": {
901 "enabled": true
902 // Specify the language name as the key and the kernel name as the value.
903 // "kernel_selections": {
904 // "python": "conda-base"
905 // "typescript": "deno"
906 // }
907 },
908 // Vim settings
909 "vim": {
910 "use_system_clipboard": "always",
911 "use_multiline_find": false,
912 "use_smartcase_find": false
913 },
914 // The server to connect to. If the environment variable
915 // ZED_SERVER_URL is set, it will override this setting.
916 "server_url": "https://zed.dev",
917 // Settings overrides to use when using Zed Preview.
918 // Mostly useful for developers who are managing multiple instances of Zed.
919 "preview": {
920 // "theme": "Andromeda"
921 },
922 // Settings overrides to use when using Zed Nightly.
923 // Mostly useful for developers who are managing multiple instances of Zed.
924 "nightly": {
925 // "theme": "Andromeda"
926 },
927 // Settings overrides to use when using Zed Stable.
928 // Mostly useful for developers who are managing multiple instances of Zed.
929 "stable": {
930 // "theme": "Andromeda"
931 },
932 // Settings overrides to use when using Zed Dev.
933 // Mostly useful for developers who are managing multiple instances of Zed.
934 "dev": {
935 // "theme": "Andromeda"
936 },
937 // Task-related settings.
938 "task": {
939 // Whether to show task status indicator in the status bar. Default: true
940 "show_status_indicator": true
941 },
942 // Whether to show full labels in line indicator or short ones
943 //
944 // Values:
945 // - `short`: "2 s, 15 l, 32 c"
946 // - `long`: "2 selections, 15 lines, 32 characters"
947 // Default: long
948 "line_indicator_format": "long",
949 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
950 //
951 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
952 // `socks5h`. `http` will be used when no scheme is specified.
953 //
954 // By default no proxy will be used, or Zed will try get proxy settings from
955 // environment variables.
956 //
957 // Examples:
958 // - "proxy": "socks5://localhost:10808"
959 // - "proxy": "http://127.0.0.1:10809"
960 "proxy": null,
961 // Set to configure aliases for the command palette.
962 // When typing a query which is a key of this object, the value will be used instead.
963 //
964 // Examples:
965 // {
966 // "W": "workspace::Save"
967 // }
968 "command_aliases": {}
969}