1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 "icon_theme": "Zed (Default)",
14 // The name of a base set of key bindings to use.
15 // This setting can take six values, each named after another
16 // text editor:
17 //
18 // 1. "VSCode"
19 // 2. "Atom"
20 // 3. "JetBrains"
21 // 4. "None"
22 // 5. "SublimeText"
23 // 6. "TextMate"
24 "base_keymap": "VSCode",
25 // Features that can be globally enabled or disabled
26 "features": {
27 // Which edit prediction provider to use.
28 "edit_prediction_provider": "copilot"
29 },
30 // The name of a font to use for rendering text in the editor
31 "buffer_font_family": "Zed Plex Mono",
32 // Set the buffer text's font fallbacks, this will be merged with
33 // the platform's default fallbacks.
34 "buffer_font_fallbacks": null,
35 // The OpenType features to enable for text in the editor.
36 "buffer_font_features": {
37 // Disable ligatures:
38 // "calt": false
39 },
40 // The default font size for text in the editor
41 "buffer_font_size": 15,
42 // The weight of the editor font in standard CSS units from 100 to 900.
43 "buffer_font_weight": 400,
44 // Set the buffer's line height.
45 // May take 3 values:
46 // 1. Use a line height that's comfortable for reading (1.618)
47 // "buffer_line_height": "comfortable"
48 // 2. Use a standard line height, (1.3)
49 // "buffer_line_height": "standard",
50 // 3. Use a custom line height
51 // "buffer_line_height": {
52 // "custom": 2
53 // },
54 "buffer_line_height": "comfortable",
55 // The name of a font to use for rendering text in the UI
56 // You can set this to ".SystemUIFont" to use the system font
57 "ui_font_family": "Zed Plex Sans",
58 // Set the UI's font fallbacks, this will be merged with the platform's
59 // default font fallbacks.
60 "ui_font_fallbacks": null,
61 // The OpenType features to enable for text in the UI
62 "ui_font_features": {
63 // Disable ligatures:
64 "calt": false
65 },
66 // The weight of the UI font in standard CSS units from 100 to 900.
67 "ui_font_weight": 400,
68 // The default font size for text in the UI
69 "ui_font_size": 16,
70 // How much to fade out unused code.
71 "unnecessary_code_fade": 0.3,
72 // Active pane styling settings.
73 "active_pane_modifiers": {
74 // The factor to grow the active pane by. Defaults to 1.0
75 // which gives the same size as all other panes.
76 "magnification": 1.0,
77 // Inset border size of the active pane, in pixels.
78 "border_size": 0.0,
79 // Opacity of the inactive panes. 0 means transparent, 1 means opaque.
80 // Values are clamped to the [0.0, 1.0] range.
81 "inactive_opacity": 1.0
82 },
83 // The direction that you want to split panes horizontally. Defaults to "up"
84 "pane_split_direction_horizontal": "up",
85 // The direction that you want to split panes horizontally. Defaults to "left"
86 "pane_split_direction_vertical": "left",
87 // Centered layout related settings.
88 "centered_layout": {
89 // The relative width of the left padding of the central pane from the
90 // workspace when the centered layout is used.
91 "left_padding": 0.2,
92 // The relative width of the right padding of the central pane from the
93 // workspace when the centered layout is used.
94 "right_padding": 0.2
95 },
96 // All settings related to the image viewer.
97 "image_viewer": {
98 // The unit for image file sizes.
99 // By default we're setting it to binary.
100 // The second option is decimal.
101 "unit": "binary"
102 },
103 // The key to use for adding multiple cursors
104 // Currently "alt" or "cmd_or_ctrl" (also aliased as
105 // "cmd" and "ctrl") are supported.
106 "multi_cursor_modifier": "alt",
107 // Whether to enable vim modes and key bindings.
108 "vim_mode": false,
109 // Whether to show the informational hover box when moving the mouse
110 // over symbols in the editor.
111 "hover_popover_enabled": true,
112 // Time to wait before showing the informational hover box
113 "hover_popover_delay": 350,
114 // Whether to confirm before quitting Zed.
115 "confirm_quit": false,
116 // Whether to restore last closed project when fresh Zed instance is opened.
117 "restore_on_startup": "last_session",
118 // Size of the drop target in the editor.
119 "drop_target_size": 0.2,
120 // Whether the window should be closed when using 'close active item' on a window with no tabs.
121 // May take 3 values:
122 // 1. Use the current platform's convention
123 // "when_closing_with_no_tabs": "platform_default"
124 // 2. Always close the window:
125 // "when_closing_with_no_tabs": "close_window",
126 // 3. Never close the window
127 // "when_closing_with_no_tabs": "keep_window_open",
128 "when_closing_with_no_tabs": "platform_default",
129 // What to do when the last window is closed.
130 // May take 2 values:
131 // 1. Use the current platform's convention
132 // "on_last_window_closed": "platform_default"
133 // 2. Always quit the application
134 // "on_last_window_closed": "quit_app",
135 "on_last_window_closed": "platform_default",
136 // Whether to use the system provided dialogs for Open and Save As.
137 // When set to false, Zed will use the built-in keyboard-first pickers.
138 "use_system_path_prompts": true,
139 // Whether the cursor blinks in the editor.
140 "cursor_blink": true,
141 // Cursor shape for the default editor.
142 // 1. A vertical bar
143 // "bar"
144 // 2. A block that surrounds the following character
145 // "block"
146 // 3. An underline / underscore that runs along the following character
147 // "underline"
148 // 4. A box drawn around the following character
149 // "hollow"
150 //
151 // Default: not set, defaults to "bar"
152 "cursor_shape": null,
153 // How to highlight the current line in the editor.
154 //
155 // 1. Don't highlight the current line:
156 // "none"
157 // 2. Highlight the gutter area:
158 // "gutter"
159 // 3. Highlight the editor area:
160 // "line"
161 // 4. Highlight the full line (default):
162 // "all"
163 "current_line_highlight": "all",
164 // Whether to highlight all occurrences of the selected text in an editor.
165 "selection_highlight": true,
166 // The debounce delay before querying highlights based on the selected text.
167 "selection_highlight_debounce": 50,
168 // The debounce delay before querying highlights from the language
169 // server based on the current cursor location.
170 "lsp_highlight_debounce": 75,
171 // Whether to pop the completions menu while typing in an editor without
172 // explicitly requesting it.
173 "show_completions_on_input": true,
174 // Whether to display inline and alongside documentation for items in the
175 // completions menu
176 "show_completion_documentation": true,
177 // Show method signatures in the editor, when inside parentheses.
178 "auto_signature_help": false,
179 /// Whether to show the signature help after completion or a bracket pair inserted.
180 /// If `auto_signature_help` is enabled, this setting will be treated as enabled also.
181 "show_signature_help_after_edits": false,
182 // Whether to show wrap guides (vertical rulers) in the editor.
183 // Setting this to true will show a guide at the 'preferred_line_length' value
184 // if 'soft_wrap' is set to 'preferred_line_length', and will show any
185 // additional guides as specified by the 'wrap_guides' setting.
186 "show_wrap_guides": true,
187 // Character counts at which to show wrap guides in the editor.
188 "wrap_guides": [],
189 // Hide the values of in variables from visual display in private files
190 "redact_private_values": false,
191 // The default number of lines to expand excerpts in the multibuffer by.
192 "expand_excerpt_lines": 3,
193 // Globs to match against file paths to determine if a file is private.
194 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
195 // Whether to use additional LSP queries to format (and amend) the code after
196 // every "trigger" symbol input, defined by LSP server capabilities.
197 "use_on_type_format": true,
198 // Whether to automatically add matching closing characters when typing
199 // opening parenthesis, bracket, brace, single or double quote characters.
200 // For example, when you type (, Zed will add a closing ) at the correct position.
201 "use_autoclose": true,
202 // Whether to automatically surround selected text when typing opening parenthesis,
203 // bracket, brace, single or double quote characters.
204 // For example, when you select text and type (, Zed will surround the text with ().
205 "use_auto_surround": true,
206 // Whether indentation of pasted content should be adjusted based on the context.
207 "auto_indent_on_paste": true,
208 // Controls how the editor handles the autoclosed characters.
209 // When set to `false`(default), skipping over and auto-removing of the closing characters
210 // happen only for auto-inserted characters.
211 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
212 // no matter how they were inserted.
213 "always_treat_brackets_as_autoclosed": false,
214 // Controls where the `editor::Rewrap` action is allowed in the current language scope.
215 //
216 // This setting can take three values:
217 //
218 // 1. Only allow rewrapping in comments:
219 // "in_comments"
220 // 2. Only allow rewrapping in the current selection(s):
221 // "in_selections"
222 // 3. Allow rewrapping anywhere:
223 // "anywhere"
224 //
225 // When using values other than `in_comments`, it is possible for the rewrapping to produce code
226 // that is syntactically invalid. Keep this in mind when selecting which behavior you would like
227 // to use.
228 //
229 // Note: This setting has no effect in Vim mode, as rewrap is already allowed everywhere.
230 "allow_rewrap": "in_comments",
231 // Controls whether edit predictions are shown immediately (true)
232 // or manually by triggering `editor::ShowEditPrediction` (false).
233 "show_edit_predictions": true,
234 // Controls whether edit predictions are shown in a given language scope.
235 // Example: ["string", "comment"]
236 "edit_predictions_disabled_in": [],
237 // Whether to show tabs and spaces in the editor.
238 // This setting can take four values:
239 //
240 // 1. Draw tabs and spaces only for the selected text (default):
241 // "selection"
242 // 2. Do not draw any tabs or spaces:
243 // "none"
244 // 3. Draw all invisible symbols:
245 // "all"
246 // 4. Draw whitespaces at boundaries only:
247 // "boundary"
248 // For a whitespace to be on a boundary, any of the following conditions need to be met:
249 // - It is a tab
250 // - It is adjacent to an edge (start or end)
251 // - It is adjacent to a whitespace (left or right)
252 "show_whitespaces": "selection",
253 // Settings related to calls in Zed
254 "calls": {
255 // Join calls with the microphone live by default
256 "mute_on_join": false,
257 // Share your project when you are the first to join a channel
258 "share_on_join": false
259 },
260 // Toolbar related settings
261 "toolbar": {
262 // Whether to show breadcrumbs.
263 "breadcrumbs": true,
264 // Whether to show quick action buttons.
265 "quick_actions": true,
266 // Whether to show the Selections menu in the editor toolbar
267 "selections_menu": true
268 },
269 // Scrollbar related settings
270 "scrollbar": {
271 // When to show the scrollbar in the editor.
272 // This setting can take four values:
273 //
274 // 1. Show the scrollbar if there's important information or
275 // follow the system's configured behavior (default):
276 // "auto"
277 // 2. Match the system's configured behavior:
278 // "system"
279 // 3. Always show the scrollbar:
280 // "always"
281 // 4. Never show the scrollbar:
282 // "never"
283 "show": "auto",
284 // Whether to show cursor positions in the scrollbar.
285 "cursors": true,
286 // Whether to show git diff indicators in the scrollbar.
287 "git_diff": true,
288 // Whether to show buffer search results in the scrollbar.
289 "search_results": true,
290 // Whether to show selected text occurrences in the scrollbar.
291 "selected_text": true,
292 // Whether to show selected symbol occurrences in the scrollbar.
293 "selected_symbol": true,
294 // Which diagnostic indicators to show in the scrollbar:
295 // - "none" or false: do not show diagnostics
296 // - "error": show only errors
297 // - "warning": show only errors and warnings
298 // - "information": show only errors, warnings, and information
299 // - "all" or true: show all diagnostics
300 "diagnostics": "all",
301 /// Forcefully enable or disable the scrollbar for each axis
302 "axes": {
303 /// When false, forcefully disables the horizontal scrollbar. Otherwise, obey other settings.
304 "horizontal": true,
305 /// When false, forcefully disables the vertical scrollbar. Otherwise, obey other settings.
306 "vertical": true
307 }
308 },
309 // Enable middle-click paste on Linux.
310 "middle_click_paste": true,
311 // What to do when multibuffer is double clicked in some of its excerpts
312 // (parts of singleton buffers).
313 // May take 2 values:
314 // 1. Behave as a regular buffer and select the whole word (default).
315 // "double_click_in_multibuffer": "select"
316 // 2. Open the excerpt clicked as a new buffer in the new tab.
317 // "double_click_in_multibuffer": "open",
318 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
319 "double_click_in_multibuffer": "select",
320 "gutter": {
321 // Whether to show line numbers in the gutter.
322 "line_numbers": true,
323 // Whether to show code action buttons in the gutter.
324 "code_actions": true,
325 // Whether to show runnables buttons in the gutter.
326 "runnables": true,
327 // Whether to show fold buttons in the gutter.
328 "folds": true
329 },
330 "indent_guides": {
331 /// Whether to show indent guides in the editor.
332 "enabled": true,
333 /// The width of the indent guides in pixels, between 1 and 10.
334 "line_width": 1,
335 /// The width of the active indent guide in pixels, between 1 and 10.
336 "active_line_width": 1,
337 /// Determines how indent guides are colored.
338 /// This setting can take the following three values:
339 ///
340 /// 1. "disabled"
341 /// 2. "fixed"
342 /// 3. "indent_aware"
343 "coloring": "fixed",
344 /// Determines how indent guide backgrounds are colored.
345 /// This setting can take the following two values:
346 ///
347 /// 1. "disabled"
348 /// 2. "indent_aware"
349 "background_coloring": "disabled"
350 },
351 // Whether the editor will scroll beyond the last line.
352 "scroll_beyond_last_line": "one_page",
353 // The number of lines to keep above/below the cursor when scrolling.
354 "vertical_scroll_margin": 3,
355 // Whether to scroll when clicking near the edge of the visible text area.
356 "autoscroll_on_clicks": false,
357 // The number of characters to keep on either side when scrolling with the mouse
358 "horizontal_scroll_margin": 5,
359 // Scroll sensitivity multiplier. This multiplier is applied
360 // to both the horizontal and vertical delta values while scrolling.
361 "scroll_sensitivity": 1.0,
362 "relative_line_numbers": false,
363 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
364 "search_wrap": true,
365 // Search options to enable by default when opening new project and buffer searches.
366 "search": {
367 "whole_word": false,
368 "case_sensitive": false,
369 "include_ignored": false,
370 "regex": false
371 },
372 // When to populate a new search's query based on the text under the cursor.
373 // This setting can take the following three values:
374 //
375 // 1. Always populate the search query with the word under the cursor (default).
376 // "always"
377 // 2. Only populate the search query when there is text selected
378 // "selection"
379 // 3. Never populate the search query
380 // "never"
381 "seed_search_query_from_cursor": "always",
382 "use_smartcase_search": false,
383 // Inlay hint related settings
384 "inlay_hints": {
385 // Global switch to toggle hints on and off, switched off by default.
386 "enabled": false,
387 // Toggle certain types of hints on and off, all switched on by default.
388 "show_type_hints": true,
389 "show_parameter_hints": true,
390 // Corresponds to null/None LSP hint type value.
391 "show_other_hints": true,
392 // Whether to show a background for inlay hints.
393 //
394 // If set to `true`, the background will use the `hint.background` color from the current theme.
395 "show_background": false,
396 // Time to wait after editing the buffer, before requesting the hints,
397 // set to 0 to disable debouncing.
398 "edit_debounce_ms": 700,
399 // Time to wait after scrolling the buffer, before requesting the hints,
400 // set to 0 to disable debouncing.
401 "scroll_debounce_ms": 50
402 },
403 "project_panel": {
404 // Whether to show the project panel button in the status bar
405 "button": true,
406 // Default width of the project panel.
407 "default_width": 240,
408 // Where to dock the project panel. Can be 'left' or 'right'.
409 "dock": "left",
410 // Spacing between worktree entries in the project panel. Can be 'comfortable' or 'standard'.
411 "entry_spacing": "comfortable",
412 // Whether to show file icons in the project panel.
413 "file_icons": true,
414 // Whether to show folder icons or chevrons for directories in the project panel.
415 "folder_icons": true,
416 // Whether to show the git status in the project panel.
417 "git_status": true,
418 // Amount of indentation for nested items.
419 "indent_size": 20,
420 // Whether to reveal it in the project panel automatically,
421 // when a corresponding project entry becomes active.
422 // Gitignored entries are never auto revealed.
423 "auto_reveal_entries": true,
424 // Whether to fold directories automatically and show compact folders
425 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
426 "auto_fold_dirs": true,
427 /// Scrollbar-related settings
428 "scrollbar": {
429 /// When to show the scrollbar in the project panel.
430 /// This setting can take five values:
431 ///
432 /// 1. null (default): Inherit editor settings
433 /// 2. Show the scrollbar if there's important information or
434 /// follow the system's configured behavior (default):
435 /// "auto"
436 /// 3. Match the system's configured behavior:
437 /// "system"
438 /// 4. Always show the scrollbar:
439 /// "always"
440 /// 5. Never show the scrollbar:
441 /// "never"
442 "show": null
443 },
444 /// Which files containing diagnostic errors/warnings to mark in the project panel.
445 /// This setting can take the following three values:
446 ///
447 /// 1. Do not mark any files:
448 /// "off"
449 /// 2. Only mark files with errors:
450 /// "errors"
451 /// 3. Mark files with errors and warnings:
452 /// "all"
453 "show_diagnostics": "all",
454 // Settings related to indent guides in the project panel.
455 "indent_guides": {
456 // When to show indent guides in the project panel.
457 // This setting can take two values:
458 //
459 // 1. Always show indent guides:
460 // "always"
461 // 2. Never show indent guides:
462 // "never"
463 "show": "always"
464 }
465 },
466 "outline_panel": {
467 // Whether to show the outline panel button in the status bar
468 "button": true,
469 // Default width of the outline panel.
470 "default_width": 300,
471 // Where to dock the outline panel. Can be 'left' or 'right'.
472 "dock": "left",
473 // Whether to show file icons in the outline panel.
474 "file_icons": true,
475 // Whether to show folder icons or chevrons for directories in the outline panel.
476 "folder_icons": true,
477 // Whether to show the git status in the outline panel.
478 "git_status": true,
479 // Amount of indentation for nested items.
480 "indent_size": 20,
481 // Whether to reveal it in the outline panel automatically,
482 // when a corresponding outline entry becomes active.
483 // Gitignored entries are never auto revealed.
484 "auto_reveal_entries": true,
485 /// Whether to fold directories automatically
486 /// when a directory has only one directory inside.
487 "auto_fold_dirs": true,
488 // Settings related to indent guides in the outline panel.
489 "indent_guides": {
490 // When to show indent guides in the outline panel.
491 // This setting can take two values:
492 //
493 // 1. Always show indent guides:
494 // "always"
495 // 2. Never show indent guides:
496 // "never"
497 "show": "always"
498 },
499 /// Scrollbar-related settings
500 "scrollbar": {
501 /// When to show the scrollbar in the project panel.
502 /// This setting can take five values:
503 ///
504 /// 1. null (default): Inherit editor settings
505 /// 2. Show the scrollbar if there's important information or
506 /// follow the system's configured behavior (default):
507 /// "auto"
508 /// 3. Match the system's configured behavior:
509 /// "system"
510 /// 4. Always show the scrollbar:
511 /// "always"
512 /// 5. Never show the scrollbar:
513 /// "never"
514 "show": null
515 }
516 },
517 "collaboration_panel": {
518 // Whether to show the collaboration panel button in the status bar.
519 "button": true,
520 // Where to dock the collaboration panel. Can be 'left' or 'right'.
521 "dock": "left",
522 // Default width of the collaboration panel.
523 "default_width": 240
524 },
525 "chat_panel": {
526 // When to show the chat panel button in the status bar.
527 // Can be 'never', 'always', or 'when_in_call',
528 // or a boolean (interpreted as 'never'/'always').
529 "button": "when_in_call",
530 // Where to the chat panel. Can be 'left' or 'right'.
531 "dock": "right",
532 // Default width of the chat panel.
533 "default_width": 240
534 },
535 "git_panel": {
536 // Whether to show the git panel button in the status bar.
537 "button": true,
538 // Where to the git panel. Can be 'left' or 'right'.
539 "dock": "left",
540 // Default width of the git panel.
541 "default_width": 360,
542 // Style of the git status indicator in the panel.
543 //
544 // Default: icon
545 "status_style": "icon",
546 "scrollbar": {
547 // When to show the scrollbar in the git panel.
548 //
549 // Default: inherits editor scrollbar settings
550 "show": null
551 }
552 },
553 "message_editor": {
554 // Whether to automatically replace emoji shortcodes with emoji characters.
555 // For example: typing `:wave:` gets replaced with `👋`.
556 "auto_replace_emoji_shortcode": true
557 },
558 "notification_panel": {
559 // Whether to show the notification panel button in the status bar.
560 "button": true,
561 // Where to dock the notification panel. Can be 'left' or 'right'.
562 "dock": "right",
563 // Default width of the notification panel.
564 "default_width": 380
565 },
566 "assistant": {
567 // Version of this setting.
568 "version": "2",
569 // Whether the assistant is enabled.
570 "enabled": true,
571 // Whether to show the assistant panel button in the status bar.
572 "button": true,
573 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
574 "dock": "right",
575 // Default width when the assistant is docked to the left or right.
576 "default_width": 640,
577 // Default height when the assistant is docked to the bottom.
578 "default_height": 320,
579 // The default model to use when creating new chats.
580 "default_model": {
581 // The provider to use.
582 "provider": "zed.dev",
583 // The model to use.
584 "model": "claude-3-5-sonnet-latest"
585 }
586 },
587 // The settings for slash commands.
588 "slash_commands": {
589 // Settings for the `/docs` slash command.
590 "docs": {
591 // Whether `/docs` is enabled.
592 "enabled": false
593 },
594 // Settings for the `/project` slash command.
595 "project": {
596 // Whether `/project` is enabled.
597 "enabled": false
598 }
599 },
600 // Whether the screen sharing icon is shown in the os status bar.
601 "show_call_status_icon": true,
602 // Whether to use language servers to provide code intelligence.
603 "enable_language_server": true,
604 // Whether to perform linked edits of associated ranges, if the language server supports it.
605 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
606 "linked_edits": true,
607 // The list of language servers to use (or disable) for all languages.
608 //
609 // This is typically customized on a per-language basis.
610 "language_servers": ["..."],
611 // When to automatically save edited buffers. This setting can
612 // take four values.
613 //
614 // 1. Never automatically save:
615 // "autosave": "off",
616 // 2. Save when changing focus away from the Zed window:
617 // "autosave": "on_window_change",
618 // 3. Save when changing focus away from a specific buffer:
619 // "autosave": "on_focus_change",
620 // 4. Save when idle for a certain amount of time:
621 // "autosave": { "after_delay": {"milliseconds": 500} },
622 "autosave": "off",
623 // Maximum number of tabs per pane. Unset for unlimited.
624 "max_tabs": null,
625 // Settings related to the editor's tab bar.
626 "tab_bar": {
627 // Whether or not to show the tab bar in the editor
628 "show": true,
629 // Whether or not to show the navigation history buttons.
630 "show_nav_history_buttons": true,
631 /// Whether or not to show the tab bar buttons.
632 "show_tab_bar_buttons": true
633 },
634 // Settings related to the editor's tabs
635 "tabs": {
636 // Show git status colors in the editor tabs.
637 "git_status": false,
638 // Position of the close button on the editor tabs.
639 "close_position": "right",
640 // Whether to show the file icon for a tab.
641 "file_icons": false,
642 // Whether to always show the close button on tabs.
643 "always_show_close_button": false,
644 // What to do after closing the current tab.
645 //
646 // 1. Activate the tab that was open previously (default)
647 // "history"
648 // 2. Activate the right neighbour tab if present
649 // "neighbour"
650 // 3. Activate the left neighbour tab if present
651 // "left_neighbour"
652 "activate_on_close": "history",
653 /// Which files containing diagnostic errors/warnings to mark in the tabs.
654 /// Diagnostics are only shown when file icons are also active.
655 /// This setting only works when can take the following three values:
656 ///
657 /// 1. Do not mark any files:
658 /// "off"
659 /// 2. Only mark files with errors:
660 /// "errors"
661 /// 3. Mark files with errors and warnings:
662 /// "all"
663 "show_diagnostics": "off"
664 },
665 // Settings related to preview tabs.
666 "preview_tabs": {
667 // Whether preview tabs should be enabled.
668 // Preview tabs allow you to open files in preview mode, where they close automatically
669 // when you switch to another file unless you explicitly pin them.
670 // This is useful for quickly viewing files without cluttering your workspace.
671 "enabled": true,
672 // Whether to open tabs in preview mode when selected from the file finder.
673 "enable_preview_from_file_finder": false,
674 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
675 "enable_preview_from_code_navigation": false
676 },
677 // Settings related to the file finder.
678 "file_finder": {
679 // Whether to show file icons in the file finder.
680 "file_icons": true,
681 // Determines how much space the file finder can take up in relation to the available window width.
682 // There are 5 possible width values:
683 //
684 // 1. Small: This value is essentially a fixed width.
685 // "modal_max_width": "small"
686 // 2. Medium:
687 // "modal_max_width": "medium"
688 // 3. Large:
689 // "modal_max_width": "large"
690 // 4. Extra Large:
691 // "modal_max_width": "xlarge"
692 // 5. Fullscreen: This value removes any horizontal padding, as it consumes the whole viewport width.
693 // "modal_max_width": "full"
694 //
695 // Default: small
696 "modal_max_width": "small"
697 },
698 // Whether or not to remove any trailing whitespace from lines of a buffer
699 // before saving it.
700 "remove_trailing_whitespace_on_save": true,
701 // Whether to start a new line with a comment when a previous line is a comment as well.
702 "extend_comment_on_newline": true,
703 // Whether or not to ensure there's a single newline at the end of a buffer
704 // when saving it.
705 "ensure_final_newline_on_save": true,
706 // Whether or not to perform a buffer format before saving
707 //
708 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
709 "format_on_save": "on",
710 // How to perform a buffer format. This setting can take 4 values:
711 //
712 // 1. Format code using the current language server:
713 // "formatter": "language_server"
714 // 2. Format code using an external command:
715 // "formatter": {
716 // "external": {
717 // "command": "prettier",
718 // "arguments": ["--stdin-filepath", "{buffer_path}"]
719 // }
720 // }
721 // 3. Format code using Zed's Prettier integration:
722 // "formatter": "prettier"
723 // 4. Default. Format files using Zed's Prettier integration (if applicable),
724 // or falling back to formatting via language server:
725 // "formatter": "auto"
726 "formatter": "auto",
727 // How to soft-wrap long lines of text.
728 // Possible values:
729 //
730 // 1. Prefer a single line generally, unless an overly long line is encountered.
731 // "soft_wrap": "none",
732 // "soft_wrap": "prefer_line", // (deprecated, same as "none")
733 // 2. Soft wrap lines that overflow the editor.
734 // "soft_wrap": "editor_width",
735 // 3. Soft wrap lines at the preferred line length.
736 // "soft_wrap": "preferred_line_length",
737 // 4. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
738 // "soft_wrap": "bounded",
739 "soft_wrap": "none",
740 // The column at which to soft-wrap lines, for buffers where soft-wrap
741 // is enabled.
742 "preferred_line_length": 80,
743 // Whether to indent lines using tab characters, as opposed to multiple
744 // spaces.
745 "hard_tabs": false,
746 // How many columns a tab should occupy.
747 "tab_size": 4,
748 // Control what info is collected by Zed.
749 "telemetry": {
750 // Send debug info like crash reports.
751 "diagnostics": true,
752 // Send anonymized usage data like what languages you're using Zed with.
753 "metrics": true
754 },
755 // Automatically update Zed. This setting may be ignored on Linux if
756 // installed through a package manager.
757 "auto_update": true,
758 // Diagnostics configuration.
759 "diagnostics": {
760 // Whether to show warnings or not by default.
761 "include_warnings": true,
762 // Settings for inline diagnostics
763 "inline": {
764 // Whether to show diagnostics inline or not
765 "enabled": false,
766 // The delay in milliseconds to show inline diagnostics after the
767 // last diagnostic update.
768 "update_debounce_ms": 150,
769 // The amount of padding between the end of the source line and the start
770 // of the inline diagnostic in units of em widths.
771 "padding": 4,
772 // The minimum column to display inline diagnostics. This setting can be
773 // used to horizontally align inline diagnostics at some column. Lines
774 // longer than this value will still push diagnostics further to the right.
775 "min_column": 0,
776 // The minimum severity of the diagnostics to show inline.
777 // Shows all diagnostics when not specified.
778 "max_severity": null
779 }
780 },
781 // Files or globs of files that will be excluded by Zed entirely. They will be skipped during file
782 // scans, file searches, and not be displayed in the project file tree. Takes precedence over `file_scan_inclusions`.
783 "file_scan_exclusions": [
784 "**/.git",
785 "**/.svn",
786 "**/.hg",
787 "**/.jj",
788 "**/CVS",
789 "**/.DS_Store",
790 "**/Thumbs.db",
791 "**/.classpath",
792 "**/.settings"
793 ],
794 // Files or globs of files that will be included by Zed, even when ignored by git. This is useful
795 // for files that are not tracked by git, but are still important to your project. Note that globs
796 // that are overly broad can slow down Zed's file scanning. `file_scan_exclusions` takes
797 // precedence over these inclusions.
798 "file_scan_inclusions": [".env*"],
799 // Git gutter behavior configuration.
800 "git": {
801 // Control whether the git gutter is shown. May take 2 values:
802 // 1. Show the gutter
803 // "git_gutter": "tracked_files"
804 // 2. Hide the gutter
805 // "git_gutter": "hide"
806 "git_gutter": "tracked_files",
807 // Control whether the git blame information is shown inline,
808 // in the currently focused line.
809 "inline_blame": {
810 "enabled": true
811 // Sets a delay after which the inline blame information is shown.
812 // Delay is restarted with every cursor movement.
813 // "delay_ms": 600
814 //
815 // Whether or not to display the git commit summary on the same line.
816 // "show_commit_summary": false
817 //
818 // The minimum column number to show the inline blame information at
819 // "min_column": 0
820 }
821 },
822 // Configuration for how direnv configuration should be loaded. May take 2 values:
823 // 1. Load direnv configuration using `direnv export json` directly.
824 // "load_direnv": "direct"
825 // 2. Load direnv configuration through the shell hook, works for POSIX shells and fish.
826 // "load_direnv": "shell_hook"
827 "load_direnv": "direct",
828 "edit_predictions": {
829 // A list of globs representing files that edit predictions should be disabled for.
830 // There's a sensible default list of globs already included.
831 // Any addition to this list will be merged with the default list.
832 // Globs are matched relative to the worktree root,
833 // except when starting with a slash (/) or equivalent in Windows.
834 "disabled_globs": [
835 "**/.env*",
836 "**/*.pem",
837 "**/*.key",
838 "**/*.cert",
839 "**/*.crt",
840 "**/.dev.vars",
841 "**/secrets.yml"
842 ],
843 // When to show edit predictions previews in buffer.
844 // This setting takes two possible values:
845 // 1. Display predictions inline when there are no language server completions available.
846 // "mode": "eager"
847 // 2. Display predictions inline only when holding a modifier key (alt by default).
848 // "mode": "subtle"
849 "mode": "eager",
850 // Whether edit predictions are enabled in the assistant panel.
851 // This setting has no effect if globally disabled.
852 "enabled_in_assistant": true
853 },
854 // Settings specific to journaling
855 "journal": {
856 // The path of the directory where journal entries are stored
857 "path": "~",
858 // What format to display the hours in
859 // May take 2 values:
860 // 1. hour12
861 // 2. hour24
862 "hour_format": "hour12"
863 },
864 // Settings specific to the terminal
865 "terminal": {
866 // What shell to use when opening a terminal. May take 3 values:
867 // 1. Use the system's default terminal configuration in /etc/passwd
868 // "shell": "system"
869 // 2. A program:
870 // "shell": {
871 // "program": "sh"
872 // }
873 // 3. A program with arguments:
874 // "shell": {
875 // "with_arguments": {
876 // "program": "/bin/bash",
877 // "args": ["--login"]
878 // }
879 // }
880 "shell": "system",
881 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
882 "dock": "bottom",
883 // Default width when the terminal is docked to the left or right.
884 "default_width": 640,
885 // Default height when the terminal is docked to the bottom.
886 "default_height": 320,
887 // What working directory to use when launching the terminal.
888 // May take 4 values:
889 // 1. Use the current file's project directory. Will Fallback to the
890 // first project directory strategy if unsuccessful
891 // "working_directory": "current_project_directory"
892 // 2. Use the first project in this workspace's directory
893 // "working_directory": "first_project_directory"
894 // 3. Always use this platform's home directory (if we can find it)
895 // "working_directory": "always_home"
896 // 4. Always use a specific directory. This value will be shell expanded.
897 // If this path is not a valid directory the terminal will default to
898 // this platform's home directory (if we can find it)
899 // "working_directory": {
900 // "always": {
901 // "directory": "~/zed/projects/"
902 // }
903 // }
904 "working_directory": "current_project_directory",
905 // Set the cursor blinking behavior in the terminal.
906 // May take 3 values:
907 // 1. Never blink the cursor, ignoring the terminal mode
908 // "blinking": "off",
909 // 2. Default the cursor blink to off, but allow the terminal to
910 // set blinking
911 // "blinking": "terminal_controlled",
912 // 3. Always blink the cursor, ignoring the terminal mode
913 // "blinking": "on",
914 "blinking": "terminal_controlled",
915 // Default cursor shape for the terminal.
916 // 1. A block that surrounds the following character
917 // "block"
918 // 2. A vertical bar
919 // "bar"
920 // 3. An underline / underscore that runs along the following character
921 // "underline"
922 // 4. A box drawn around the following character
923 // "hollow"
924 //
925 // Default: not set, defaults to "block"
926 "cursor_shape": null,
927 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
928 // Alternate Scroll mode converts mouse scroll events into up / down key
929 // presses when in the alternate screen (e.g. when running applications
930 // like vim or less). The terminal can still set and unset this mode.
931 // May take 2 values:
932 // 1. Default alternate scroll mode to on
933 // "alternate_scroll": "on",
934 // 2. Default alternate scroll mode to off
935 // "alternate_scroll": "off",
936 "alternate_scroll": "off",
937 // Set whether the option key behaves as the meta key.
938 // May take 2 values:
939 // 1. Rely on default platform handling of option key, on macOS
940 // this means generating certain unicode characters
941 // "option_as_meta": false,
942 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
943 // "option_as_meta": true,
944 "option_as_meta": false,
945 // Whether or not selecting text in the terminal will automatically
946 // copy to the system clipboard.
947 "copy_on_select": false,
948 // Whether to show the terminal button in the status bar
949 "button": true,
950 // Any key-value pairs added to this list will be added to the terminal's
951 // environment. Use `:` to separate multiple values.
952 "env": {
953 // "KEY": "value1:value2"
954 },
955 // Set the terminal's line height.
956 // May take 3 values:
957 // 1. Use a line height that's comfortable for reading, 1.618
958 // "line_height": "comfortable"
959 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
960 // particularly if they use box characters
961 // "line_height": "standard",
962 // 3. Use a custom line height.
963 // "line_height": {
964 // "custom": 2
965 // },
966 "line_height": "comfortable",
967 // Activate the python virtual environment, if one is found, in the
968 // terminal's working directory (as resolved by the working_directory
969 // setting). Set this to "off" to disable this behavior.
970 "detect_venv": {
971 "on": {
972 // Default directories to search for virtual environments, relative
973 // to the current working directory. We recommend overriding this
974 // in your project's settings, rather than globally.
975 "directories": [".env", "env", ".venv", "venv"],
976 // Can also be `csh`, `fish`, `nushell` and `power_shell`
977 "activate_script": "default"
978 }
979 },
980 "toolbar": {
981 // Whether to display the terminal title in its toolbar's breadcrumbs.
982 // Only shown if the terminal title is not empty.
983 //
984 // The shell running in the terminal needs to be configured to emit the title.
985 // Example: `echo -e "\e]2;New Title\007";`
986 "breadcrumbs": true
987 },
988 /// Scrollbar-related settings
989 "scrollbar": {
990 /// When to show the scrollbar in the terminal.
991 /// This setting can take five values:
992 ///
993 /// 1. null (default): Inherit editor settings
994 /// 2. Show the scrollbar if there's important information or
995 /// follow the system's configured behavior (default):
996 /// "auto"
997 /// 3. Match the system's configured behavior:
998 /// "system"
999 /// 4. Always show the scrollbar:
1000 /// "always"
1001 /// 5. Never show the scrollbar:
1002 /// "never"
1003 "show": null
1004 }
1005 // Set the terminal's font size. If this option is not included,
1006 // the terminal will default to matching the buffer's font size.
1007 // "font_size": 15,
1008 // Set the terminal's font family. If this option is not included,
1009 // the terminal will default to matching the buffer's font family.
1010 // "font_family": "Zed Plex Mono",
1011 // Set the terminal's font fallbacks. If this option is not included,
1012 // the terminal will default to matching the buffer's font fallbacks.
1013 // This will be merged with the platform's default font fallbacks
1014 // "font_fallbacks": ["FiraCode Nerd Fonts"],
1015 // Sets the maximum number of lines in the terminal's scrollback buffer.
1016 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
1017 // Existing terminals will not pick up this change until they are recreated.
1018 // "max_scroll_history_lines": 10000,
1019 },
1020 "code_actions_on_format": {},
1021 /// Settings related to running tasks.
1022 "tasks": {
1023 "variables": {}
1024 },
1025 // An object whose keys are language names, and whose values
1026 // are arrays of filenames or extensions of files that should
1027 // use those languages.
1028 //
1029 // For example, to treat files like `foo.notjs` as JavaScript,
1030 // and `Embargo.lock` as TOML:
1031 //
1032 // {
1033 // "JavaScript": ["notjs"],
1034 // "TOML": ["Embargo.lock"]
1035 // }
1036 //
1037 "file_types": {
1038 "Plain Text": ["txt"],
1039 "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "**/.vscode/**/*.json"],
1040 "Shell Script": [".env.*"]
1041 },
1042 /// By default use a recent system version of node, or install our own.
1043 /// You can override this to use a version of node that is not in $PATH with:
1044 /// {
1045 /// "node": {
1046 /// "path": "/path/to/node"
1047 /// "npm_path": "/path/to/npm" (defaults to node_path/../npm)
1048 /// }
1049 /// }
1050 /// or to ensure Zed always downloads and installs an isolated version of node:
1051 /// {
1052 /// "node": {
1053 /// "ignore_system_version": true,
1054 /// }
1055 /// NOTE: changing this setting currently requires restarting Zed.
1056 "node": {},
1057 // The extensions that Zed should automatically install on startup.
1058 //
1059 // If you don't want any of these extensions, add this field to your settings
1060 // and change the value to `false`.
1061 "auto_install_extensions": {
1062 "html": true
1063 },
1064 // Different settings for specific languages.
1065 "languages": {
1066 "Astro": {
1067 "language_servers": ["astro-language-server", "..."],
1068 "prettier": {
1069 "allowed": true,
1070 "plugins": ["prettier-plugin-astro"]
1071 }
1072 },
1073 "Blade": {
1074 "prettier": {
1075 "allowed": true
1076 }
1077 },
1078 "C": {
1079 "format_on_save": "off",
1080 "use_on_type_format": false,
1081 "prettier": {
1082 "allowed": false
1083 }
1084 },
1085 "C++": {
1086 "format_on_save": "off",
1087 "use_on_type_format": false,
1088 "prettier": {
1089 "allowed": false
1090 }
1091 },
1092 "CSS": {
1093 "prettier": {
1094 "allowed": true
1095 }
1096 },
1097 "Dart": {
1098 "tab_size": 2
1099 },
1100 "Diff": {
1101 "show_edit_predictions": false,
1102 "remove_trailing_whitespace_on_save": false,
1103 "ensure_final_newline_on_save": false
1104 },
1105 "Elixir": {
1106 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1107 },
1108 "Erlang": {
1109 "language_servers": ["erlang-ls", "!elp", "..."]
1110 },
1111 "Git Commit": {
1112 "allow_rewrap": "anywhere"
1113 },
1114 "Go": {
1115 "code_actions_on_format": {
1116 "source.organizeImports": true
1117 }
1118 },
1119 "GraphQL": {
1120 "prettier": {
1121 "allowed": true
1122 }
1123 },
1124 "HEEX": {
1125 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1126 },
1127 "HTML": {
1128 "prettier": {
1129 "allowed": true
1130 }
1131 },
1132 "Java": {
1133 "prettier": {
1134 "allowed": true,
1135 "plugins": ["prettier-plugin-java"]
1136 }
1137 },
1138 "JavaScript": {
1139 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1140 "prettier": {
1141 "allowed": true
1142 }
1143 },
1144 "JSON": {
1145 "prettier": {
1146 "allowed": true
1147 }
1148 },
1149 "JSONC": {
1150 "prettier": {
1151 "allowed": true
1152 }
1153 },
1154 "Markdown": {
1155 "format_on_save": "off",
1156 "use_on_type_format": false,
1157 "allow_rewrap": "anywhere",
1158 "prettier": {
1159 "allowed": true
1160 }
1161 },
1162 "PHP": {
1163 "language_servers": ["phpactor", "!intelephense", "..."],
1164 "prettier": {
1165 "allowed": true,
1166 "plugins": ["@prettier/plugin-php"],
1167 "parser": "php"
1168 }
1169 },
1170 "Plain Text": {
1171 "allow_rewrap": "anywhere"
1172 },
1173 "Ruby": {
1174 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
1175 },
1176 "SCSS": {
1177 "prettier": {
1178 "allowed": true
1179 }
1180 },
1181 "SQL": {
1182 "prettier": {
1183 "allowed": true,
1184 "plugins": ["prettier-plugin-sql"]
1185 }
1186 },
1187 "Starlark": {
1188 "language_servers": ["starpls", "!buck2-lsp", "..."]
1189 },
1190 "Svelte": {
1191 "language_servers": ["svelte-language-server", "..."],
1192 "prettier": {
1193 "allowed": true,
1194 "plugins": ["prettier-plugin-svelte"]
1195 }
1196 },
1197 "TSX": {
1198 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1199 "prettier": {
1200 "allowed": true
1201 }
1202 },
1203 "Twig": {
1204 "prettier": {
1205 "allowed": true
1206 }
1207 },
1208 "TypeScript": {
1209 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1210 "prettier": {
1211 "allowed": true
1212 }
1213 },
1214 "Vue.js": {
1215 "language_servers": ["vue-language-server", "..."],
1216 "prettier": {
1217 "allowed": true
1218 }
1219 },
1220 "XML": {
1221 "prettier": {
1222 "allowed": true,
1223 "plugins": ["@prettier/plugin-xml"]
1224 }
1225 },
1226 "YAML": {
1227 "prettier": {
1228 "allowed": true
1229 }
1230 },
1231 "Zig": {
1232 "language_servers": ["zls", "..."]
1233 }
1234 },
1235 // Different settings for specific language models.
1236 "language_models": {
1237 "anthropic": {
1238 "version": "1",
1239 "api_url": "https://api.anthropic.com"
1240 },
1241 "google": {
1242 "api_url": "https://generativelanguage.googleapis.com"
1243 },
1244 "ollama": {
1245 "api_url": "http://localhost:11434"
1246 },
1247 "openai": {
1248 "version": "1",
1249 "api_url": "https://api.openai.com/v1"
1250 },
1251 "lmstudio": {
1252 "api_url": "http://localhost:1234/api/v0"
1253 },
1254 "deepseek": {
1255 "api_url": "https://api.deepseek.com"
1256 },
1257 "mistral": {
1258 "api_url": "https://api.mistral.ai/v1"
1259 }
1260 },
1261 // Zed's Prettier integration settings.
1262 // Allows to enable/disable formatting with Prettier
1263 // and configure default Prettier, used when no project-level Prettier installation is found.
1264 "prettier": {
1265 // // Whether to consider prettier formatter or not when attempting to format a file.
1266 // "allowed": false,
1267 //
1268 // // Use regular Prettier json configuration.
1269 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1270 // // the project has no other Prettier installed.
1271 // "plugins": [],
1272 //
1273 // // Use regular Prettier json configuration.
1274 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1275 // // the project has no other Prettier installed.
1276 // "trailingComma": "es5",
1277 // "tabWidth": 4,
1278 // "semi": false,
1279 // "singleQuote": true
1280 },
1281 // LSP Specific settings.
1282 "lsp": {
1283 // Specify the LSP name as a key here.
1284 // "rust-analyzer": {
1285 // // These initialization options are merged into Zed's defaults
1286 // "initialization_options": {
1287 // "check": {
1288 // "command": "clippy" // rust-analyzer.check.command (default: "check")
1289 // }
1290 // }
1291 // }
1292 },
1293 // Jupyter settings
1294 "jupyter": {
1295 "enabled": true
1296 // Specify the language name as the key and the kernel name as the value.
1297 // "kernel_selections": {
1298 // "python": "conda-base"
1299 // "typescript": "deno"
1300 // }
1301 },
1302 // Vim settings
1303 "vim": {
1304 "default_mode": "normal",
1305 "toggle_relative_line_numbers": false,
1306 "use_system_clipboard": "always",
1307 "use_multiline_find": false,
1308 "use_smartcase_find": false,
1309 "highlight_on_yank_duration": 200,
1310 "custom_digraphs": {}
1311 },
1312 // The server to connect to. If the environment variable
1313 // ZED_SERVER_URL is set, it will override this setting.
1314 "server_url": "https://zed.dev",
1315 // Settings overrides to use when using Zed Preview.
1316 // Mostly useful for developers who are managing multiple instances of Zed.
1317 "preview": {
1318 // "theme": "Andromeda"
1319 },
1320 // Settings overrides to use when using Zed Nightly.
1321 // Mostly useful for developers who are managing multiple instances of Zed.
1322 "nightly": {
1323 // "theme": "Andromeda"
1324 },
1325 // Settings overrides to use when using Zed Stable.
1326 // Mostly useful for developers who are managing multiple instances of Zed.
1327 "stable": {
1328 // "theme": "Andromeda"
1329 },
1330 // Settings overrides to use when using Zed Dev.
1331 // Mostly useful for developers who are managing multiple instances of Zed.
1332 "dev": {
1333 // "theme": "Andromeda"
1334 },
1335 // Task-related settings.
1336 "task": {
1337 // Whether to show task status indicator in the status bar. Default: true
1338 "show_status_indicator": true
1339 },
1340 // Whether to show full labels in line indicator or short ones
1341 //
1342 // Values:
1343 // - `short`: "2 s, 15 l, 32 c"
1344 // - `long`: "2 selections, 15 lines, 32 characters"
1345 // Default: long
1346 "line_indicator_format": "long",
1347 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1348 //
1349 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1350 // `socks5h`. `http` will be used when no scheme is specified.
1351 //
1352 // By default no proxy will be used, or Zed will try get proxy settings from
1353 // environment variables.
1354 //
1355 // Examples:
1356 // - "proxy": "socks5h://localhost:10808"
1357 // - "proxy": "http://127.0.0.1:10809"
1358 "proxy": null,
1359 // Set to configure aliases for the command palette.
1360 // When typing a query which is a key of this object, the value will be used instead.
1361 //
1362 // Examples:
1363 // {
1364 // "W": "workspace::Save"
1365 // }
1366 "command_aliases": {},
1367 // Whether to show user picture in titlebar.
1368 "show_user_picture": true,
1369 // ssh_connections is an array of ssh connections.
1370 // You can configure these from `project: Open Remote` in the command palette.
1371 // Zed's ssh support will pull configuration from your ~/.ssh too.
1372 // Examples:
1373 // [
1374 // {
1375 // "host": "example-box",
1376 // // "port": 22, "username": "test", "args": ["-i", "/home/user/.ssh/id_rsa"]
1377 // "projects": [
1378 // {
1379 // "paths": ["/home/user/code/zed"]
1380 // }
1381 // ]
1382 // }
1383 // ]
1384 "ssh_connections": [],
1385 // Configures context servers for use in the Assistant.
1386 "context_servers": {}
1387}