1{
2 // The name of the Zed theme to use for the UI
3 "theme": "one-dark",
4 // The name of a font to use for rendering text in the editor
5 "buffer_font_family": "Zed Mono",
6 // The default font size for text in the editor
7 "buffer_font_size": 15,
8 // Whether to enable vim modes and key bindings
9 "vim_mode": false,
10 // Whether to show the informational hover box when moving the mouse
11 // over symbols in the editor.
12 "hover_popover_enabled": true,
13 // Whether to pop the completions menu while typing in an editor without
14 // explicitly requesting it.
15 "show_completions_on_input": true,
16 // Whether new projects should start out 'online'. Online projects
17 // appear in the contacts panel under your name, so that your contacts
18 // can see which projects you are working on. Regardless of this
19 // setting, projects keep their last online status when you reopen them.
20 "projects_online_by_default": true,
21 // Whether to use language servers to provide code intelligence.
22 "enable_language_server": true,
23 // When to automatically save edited buffers. This setting can
24 // take four values.
25 //
26 // 1. Never automatically save:
27 // "autosave": "off",
28 // 2. Save when changing focus away from the Zed window:
29 // "autosave": "on_window_change",
30 // 3. Save when changing focus away from a specific buffer:
31 // "autosave": "on_focus_change",
32 // 4. Save when idle for a certain amount of time:
33 // "autosave": { "after_delay": {"milliseconds": 500} },
34 "autosave": "off",
35 // Where to place the dock by default. This setting can take three
36 // values:
37 //
38 // 1. Position the dock attached to the bottom of the workspace
39 // "default_dock_anchor": "bottom"
40 // 2. Position the dock to the right of the workspace like a side panel
41 // "default_dock_anchor": "right"
42 // 3. Position the dock full screen over the entire workspace"
43 // "default_dock_anchor": "expanded"
44 "default_dock_anchor": "right",
45 // Whether or not to perform a buffer format before saving
46 "format_on_save": "on",
47 // How to perform a buffer format. This setting can take two values:
48 //
49 // 1. Format code using the current language server:
50 // "format_on_save": "language_server"
51 // 2. Format code using an external command:
52 // "format_on_save": {
53 // "external": {
54 // "command": "prettier",
55 // "arguments": ["--stdin-filepath", "{buffer_path}"]
56 // }
57 // }
58 "formatter": "language_server",
59 // How to soft-wrap long lines of text. This setting can take
60 // three values:
61 //
62 // 1. Do not soft wrap.
63 // "soft_wrap": "none",
64 // 2. Soft wrap lines that overflow the editor:
65 // "soft_wrap": "editor_width",
66 // 3. Soft wrap lines at the preferred line length
67 // "soft_wrap": "preferred_line_length",
68 "soft_wrap": "none",
69 // The column at which to soft-wrap lines, for buffers where soft-wrap
70 // is enabled.
71 "preferred_line_length": 80,
72 // Whether to indent lines using tab characters, as opposed to multiple
73 // spaces.
74 "hard_tabs": false,
75 // How many columns a tab should occupy.
76 "tab_size": 4,
77 // Settings specific to the terminal
78 "terminal": {
79 // What shell to use when opening a terminal. May take 3 values:
80 // 1. Use the system's default terminal configuration (e.g. $TERM).
81 // "shell": "system"
82 // 2. A program:
83 // "shell": {
84 // "program": "sh"
85 // }
86 // 3. A program with arguments:
87 // "shell": {
88 // "with_arguments": {
89 // "program": "/bin/bash",
90 // "arguments": ["--login"]
91 // }
92 // }
93 "shell": "system",
94 // What working directory to use when launching the terminal.
95 // May take 4 values:
96 // 1. Use the current file's project directory. Will Fallback to the
97 // first project directory strategy if unsuccessful
98 // "working_directory": "current_project_directory"
99 // 2. Use the first project in this workspace's directory
100 // "working_directory": "first_project_directory"
101 // 3. Always use this platform's home directory (if we can find it)
102 // "working_directory": "always_home"
103 // 4. Always use a specific directory. This value will be shell expanded.
104 // If this path is not a valid directory the terminal will default to
105 // this platform's home directory (if we can find it)
106 // "working_directory": {
107 // "always": {
108 // "directory": "~/zed/projects/"
109 // }
110 // }
111 //
112 //
113 "working_directory": "current_project_directory",
114 // Set the cursor blinking behavior in the terminal.
115 // May take 4 values:
116 // 1. Never blink the cursor, ignoring the terminal mode
117 // "blinking": "off",
118 // 2. Default the cursor blink to off, but allow the terminal to
119 // set blinking
120 // "blinking": "terminal_controlled",
121 // 3. Always blink the cursor, ignoring the terminal mode
122 // "blinking": "on",
123 "blinking": "terminal_controlled",
124 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
125 // Alternate Scroll mode converts mouse scroll events into up / down key
126 // presses when in the alternate screen (e.g. when running applications
127 // like vim or less). The terminal can still set and unset this mode.
128 // May take 2 values:
129 // 1. Default alternate scroll mode to on
130 // "alternate_scroll": "on",
131 // 2. Default alternate scroll mode to off
132 // "alternate_scroll": "off",
133 "alternate_scroll": "off",
134 // Set whether the option key behaves as the meta key.
135 // May take 2 values:
136 // 1. Rely on default platform handling of option key, on macOS
137 // this means generating certain unicode characters
138 // "option_to_meta": false,
139 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
140 // "option_to_meta": true,
141 "option_as_meta": false,
142 // Any key-value pairs added to this list will be added to the terminal's
143 // enviroment. Use `:` to seperate multiple values.
144 "env": {
145 // "KEY": "value1:value2"
146 }
147 // Set the terminal's font size. If this option is not included,
148 // the terminal will default to matching the buffer's font size.
149 // "font_size": "15"
150 // Set the terminal's font family. If this option is not included,
151 // the terminal will default to matching the buffer's font family.
152 // "font_family": "Zed Mono"
153 },
154 // Different settings for specific languages.
155 "languages": {
156 "Plain Text": {
157 "soft_wrap": "preferred_line_length"
158 },
159 "C": {
160 "tab_size": 2
161 },
162 "C++": {
163 "tab_size": 2
164 },
165 "Elixir": {
166 "tab_size": 2
167 },
168 "Go": {
169 "tab_size": 4,
170 "hard_tabs": true
171 },
172 "Markdown": {
173 "soft_wrap": "preferred_line_length"
174 },
175 "Rust": {
176 "tab_size": 4
177 },
178 "JavaScript": {
179 "tab_size": 2
180 },
181 "TypeScript": {
182 "tab_size": 2
183 },
184 "TSX": {
185 "tab_size": 2
186 }
187 },
188 // LSP Specific settings.
189 "lsp": {
190 // Specify the LSP name as a key here.
191 // As of 8/10/22, supported LSPs are:
192 // pyright
193 // gopls
194 // rust-analyzer
195 // typescript-language-server
196 // vscode-json-languageserver
197 // "rust_analyzer": {
198 // //These initialization options are merged into Zed's defaults
199 // "initialization_options": {
200 // "checkOnSave": {
201 // "command": "clippy"
202 // }
203 // }
204 // }
205 }
206}