1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 // The name of a base set of key bindings to use.
14 // This setting can take four values, each named after another
15 // text editor:
16 //
17 // 1. "VSCode"
18 // 2. "JetBrains"
19 // 3. "SublimeText"
20 // 4. "Atom"
21 "base_keymap": "VSCode",
22 // Features that can be globally enabled or disabled
23 "features": {
24 // Which inline completion provider to use.
25 "inline_completion_provider": "copilot"
26 },
27 // The name of a font to use for rendering text in the editor
28 "buffer_font_family": "Zed Plex Mono",
29 // Set the buffer text's font fallbacks, this will be merged with
30 // the platform's default fallbacks.
31 "buffer_font_fallbacks": null,
32 // The OpenType features to enable for text in the editor.
33 "buffer_font_features": {
34 // Disable ligatures:
35 // "calt": false
36 },
37 // The default font size for text in the editor
38 "buffer_font_size": 15,
39 // The weight of the editor font in standard CSS units from 100 to 900.
40 "buffer_font_weight": 400,
41 // Set the buffer's line height.
42 // May take 3 values:
43 // 1. Use a line height that's comfortable for reading (1.618)
44 // "buffer_line_height": "comfortable"
45 // 2. Use a standard line height, (1.3)
46 // "buffer_line_height": "standard",
47 // 3. Use a custom line height
48 // "buffer_line_height": {
49 // "custom": 2
50 // },
51 "buffer_line_height": "comfortable",
52 // The name of a font to use for rendering text in the UI
53 // You can set this to ".SystemUIFont" to use the system font
54 "ui_font_family": "Zed Plex Sans",
55 // Set the UI's font fallbacks, this will be merged with the platform's
56 // default font fallbacks.
57 "ui_font_fallbacks": null,
58 // The OpenType features to enable for text in the UI
59 "ui_font_features": {
60 // Disable ligatures:
61 "calt": false
62 },
63 // The weight of the UI font in standard CSS units from 100 to 900.
64 "ui_font_weight": 400,
65 // The default font size for text in the UI
66 "ui_font_size": 16,
67 // How much to fade out unused code.
68 "unnecessary_code_fade": 0.3,
69 // The factor to grow the active pane by. Defaults to 1.0
70 // which gives the same size as all other panes.
71 "active_pane_magnification": 1.0,
72 // The direction that you want to split panes horizontally. Defaults to "up"
73 "pane_split_direction_horizontal": "up",
74 // The direction that you want to split panes horizontally. Defaults to "left"
75 "pane_split_direction_vertical": "left",
76 // Centered layout related settings.
77 "centered_layout": {
78 // The relative width of the left padding of the central pane from the
79 // workspace when the centered layout is used.
80 "left_padding": 0.2,
81 // The relative width of the right padding of the central pane from the
82 // workspace when the centered layout is used.
83 "right_padding": 0.2
84 },
85 // The key to use for adding multiple cursors
86 // Currently "alt" or "cmd_or_ctrl" (also aliased as
87 // "cmd" and "ctrl") are supported.
88 "multi_cursor_modifier": "alt",
89 // Whether to enable vim modes and key bindings.
90 "vim_mode": false,
91 // Whether to show the informational hover box when moving the mouse
92 // over symbols in the editor.
93 "hover_popover_enabled": true,
94 // Whether to confirm before quitting Zed.
95 "confirm_quit": false,
96 // Whether to restore last closed project when fresh Zed instance is opened.
97 "restore_on_startup": "last_session",
98 // Size of the drop target in the editor.
99 "drop_target_size": 0.2,
100 // Whether the window should be closed when using 'close active item' on a window with no tabs.
101 // May take 3 values:
102 // 1. Use the current platform's convention
103 // "when_closing_with_no_tabs": "platform_default"
104 // 2. Always close the window:
105 // "when_closing_with_no_tabs": "close_window",
106 // 3. Never close the window
107 // "when_closing_with_no_tabs": "keep_window_open",
108 "when_closing_with_no_tabs": "platform_default",
109 // Whether to use the system provided dialogs for Open and Save As.
110 // When set to false, Zed will use the built-in keyboard-first pickers.
111 "use_system_path_prompts": true,
112 // Whether the cursor blinks in the editor.
113 "cursor_blink": true,
114 // Cursor shape for the default editor.
115 // 1. A vertical bar
116 // "bar"
117 // 2. A block that surrounds the following character
118 // "block"
119 // 3. An underline that runs along the following character
120 // "underscore"
121 // 4. A box drawn around the following character
122 // "hollow"
123 //
124 // Default: not set, defaults to "bar"
125 "cursor_shape": null,
126 // How to highlight the current line in the editor.
127 //
128 // 1. Don't highlight the current line:
129 // "none"
130 // 2. Highlight the gutter area:
131 // "gutter"
132 // 3. Highlight the editor area:
133 // "line"
134 // 4. Highlight the full line (default):
135 // "all"
136 "current_line_highlight": "all",
137 // Whether to pop the completions menu while typing in an editor without
138 // explicitly requesting it.
139 "show_completions_on_input": true,
140 // Whether to display inline and alongside documentation for items in the
141 // completions menu
142 "show_completion_documentation": true,
143 // The debounce delay before re-querying the language server for completion
144 // documentation when not included in original completion list.
145 "completion_documentation_secondary_query_debounce": 300,
146 // Show method signatures in the editor, when inside parentheses.
147 "auto_signature_help": false,
148 /// Whether to show the signature help after completion or a bracket pair inserted.
149 /// If `auto_signature_help` is enabled, this setting will be treated as enabled also.
150 "show_signature_help_after_edits": true,
151 // Whether to show wrap guides (vertical rulers) in the editor.
152 // Setting this to true will show a guide at the 'preferred_line_length' value
153 // if softwrap is set to 'preferred_line_length', and will show any
154 // additional guides as specified by the 'wrap_guides' setting.
155 "show_wrap_guides": true,
156 // Character counts at which to show wrap guides in the editor.
157 "wrap_guides": [],
158 // Hide the values of in variables from visual display in private files
159 "redact_private_values": false,
160 // The default number of lines to expand excerpts in the multibuffer by.
161 "expand_excerpt_lines": 3,
162 // Globs to match against file paths to determine if a file is private.
163 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
164 // Whether to use additional LSP queries to format (and amend) the code after
165 // every "trigger" symbol input, defined by LSP server capabilities.
166 "use_on_type_format": true,
167 // Whether to automatically add matching closing characters when typing
168 // opening parenthesis, bracket, brace, single or double quote characters.
169 // For example, when you type (, Zed will add a closing ) at the correct position.
170 "use_autoclose": true,
171 // Whether to automatically surround selected text when typing opening parenthesis,
172 // bracket, brace, single or double quote characters.
173 // For example, when you select text and type (, Zed will surround the text with ().
174 "use_auto_surround": true,
175 // Controls how the editor handles the autoclosed characters.
176 // When set to `false`(default), skipping over and auto-removing of the closing characters
177 // happen only for auto-inserted characters.
178 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
179 // no matter how they were inserted.
180 "always_treat_brackets_as_autoclosed": false,
181 // Controls whether inline completions are shown immediately (true)
182 // or manually by triggering `editor::ShowInlineCompletion` (false).
183 "show_inline_completions": true,
184 // Whether to show tabs and spaces in the editor.
185 // This setting can take three values:
186 //
187 // 1. Draw tabs and spaces only for the selected text (default):
188 // "selection"
189 // 2. Do not draw any tabs or spaces:
190 // "none"
191 // 3. Draw all invisible symbols:
192 // "all"
193 // 4. Draw whitespaces at boundaries only:
194 // "boundary"
195 // For a whitespace to be on a boundary, any of the following conditions need to be met:
196 // - It is a tab
197 // - It is adjacent to an edge (start or end)
198 // - It is adjacent to a whitespace (left or right)
199 "show_whitespaces": "selection",
200 // Settings related to calls in Zed
201 "calls": {
202 // Join calls with the microphone live by default
203 "mute_on_join": false,
204 // Share your project when you are the first to join a channel
205 "share_on_join": false
206 },
207 // Toolbar related settings
208 "toolbar": {
209 // Whether to show breadcrumbs.
210 "breadcrumbs": true,
211 // Whether to show quick action buttons.
212 "quick_actions": true,
213 // Whether to show the Selections menu in the editor toolbar
214 "selections_menu": true
215 },
216 // Scrollbar related settings
217 "scrollbar": {
218 // When to show the scrollbar in the editor.
219 // This setting can take four values:
220 //
221 // 1. Show the scrollbar if there's important information or
222 // follow the system's configured behavior (default):
223 // "auto"
224 // 2. Match the system's configured behavior:
225 // "system"
226 // 3. Always show the scrollbar:
227 // "always"
228 // 4. Never show the scrollbar:
229 // "never"
230 "show": "auto",
231 // Whether to show cursor positions in the scrollbar.
232 "cursors": true,
233 // Whether to show git diff indicators in the scrollbar.
234 "git_diff": true,
235 // Whether to show buffer search results in the scrollbar.
236 "search_results": true,
237 // Whether to show selected symbol occurrences in the scrollbar.
238 "selected_symbol": true,
239 // Whether to show diagnostic indicators in the scrollbar.
240 "diagnostics": true
241 },
242 // Enable middle-click paste on Linux.
243 "middle_click_paste": true,
244 // What to do when multibuffer is double clicked in some of its excerpts
245 // (parts of singleton buffers).
246 // May take 2 values:
247 // 1. Behave as a regular buffer and select the whole word (default).
248 // "double_click_in_multibuffer": "select"
249 // 2. Open the excerpt clicked as a new buffer in the new tab.
250 // "double_click_in_multibuffer": "open",
251 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
252 "double_click_in_multibuffer": "select",
253 "gutter": {
254 // Whether to show line numbers in the gutter.
255 "line_numbers": true,
256 // Whether to show code action buttons in the gutter.
257 "code_actions": true,
258 // Whether to show runnables buttons in the gutter.
259 "runnables": true,
260 // Whether to show fold buttons in the gutter.
261 "folds": true
262 },
263 "indent_guides": {
264 /// Whether to show indent guides in the editor.
265 "enabled": true,
266 /// The width of the indent guides in pixels, between 1 and 10.
267 "line_width": 1,
268 /// The width of the active indent guide in pixels, between 1 and 10.
269 "active_line_width": 1,
270 /// Determines how indent guides are colored.
271 /// This setting can take the following three values:
272 ///
273 /// 1. "disabled"
274 /// 2. "fixed"
275 /// 3. "indent_aware"
276 "coloring": "fixed",
277 /// Determines how indent guide backgrounds are colored.
278 /// This setting can take the following two values:
279 ///
280 /// 1. "disabled"
281 /// 2. "indent_aware"
282 "background_coloring": "disabled"
283 },
284 // Whether the editor will scroll beyond the last line.
285 "scroll_beyond_last_line": "one_page",
286 // The number of lines to keep above/below the cursor when scrolling.
287 "vertical_scroll_margin": 3,
288 // Scroll sensitivity multiplier. This multiplier is applied
289 // to both the horizontal and vertical delta values while scrolling.
290 "scroll_sensitivity": 1.0,
291 "relative_line_numbers": false,
292 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
293 "search_wrap": true,
294 // Search options to enable by default when opening new project and buffer searches.
295 "search": {
296 "whole_word": false,
297 "case_sensitive": false,
298 "include_ignored": false,
299 "regex": false
300 },
301 // When to populate a new search's query based on the text under the cursor.
302 // This setting can take the following three values:
303 //
304 // 1. Always populate the search query with the word under the cursor (default).
305 // "always"
306 // 2. Only populate the search query when there is text selected
307 // "selection"
308 // 3. Never populate the search query
309 // "never"
310 "seed_search_query_from_cursor": "always",
311 "use_smartcase_search": false,
312 // Inlay hint related settings
313 "inlay_hints": {
314 // Global switch to toggle hints on and off, switched off by default.
315 "enabled": false,
316 // Toggle certain types of hints on and off, all switched on by default.
317 "show_type_hints": true,
318 "show_parameter_hints": true,
319 // Corresponds to null/None LSP hint type value.
320 "show_other_hints": true,
321 // Time to wait after editing the buffer, before requesting the hints,
322 // set to 0 to disable debouncing.
323 "edit_debounce_ms": 700,
324 // Time to wait after scrolling the buffer, before requesting the hints,
325 // set to 0 to disable debouncing.
326 "scroll_debounce_ms": 50
327 },
328 "project_panel": {
329 // Whether to show the project panel button in the status bar
330 "button": true,
331 // Default width of the project panel.
332 "default_width": 240,
333 // Where to dock the project panel. Can be 'left' or 'right'.
334 "dock": "left",
335 // Whether to show file icons in the project panel.
336 "file_icons": true,
337 // Whether to show folder icons or chevrons for directories in the project panel.
338 "folder_icons": true,
339 // Whether to show the git status in the project panel.
340 "git_status": true,
341 // Amount of indentation for nested items.
342 "indent_size": 20,
343 // Whether to reveal it in the project panel automatically,
344 // when a corresponding project entry becomes active.
345 // Gitignored entries are never auto revealed.
346 "auto_reveal_entries": true,
347 // Whether to fold directories automatically and show compact folders
348 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
349 "auto_fold_dirs": true,
350 /// Scrollbar-related settings
351 "scrollbar": {
352 /// When to show the scrollbar in the project panel.
353 ///
354 /// Default: always
355 "show": "always"
356 }
357 },
358 "outline_panel": {
359 // Whether to show the outline panel button in the status bar
360 "button": true,
361 // Default width of the outline panel.
362 "default_width": 300,
363 // Where to dock the outline panel. Can be 'left' or 'right'.
364 "dock": "left",
365 // Whether to show file icons in the outline panel.
366 "file_icons": true,
367 // Whether to show folder icons or chevrons for directories in the outline panel.
368 "folder_icons": true,
369 // Whether to show the git status in the outline panel.
370 "git_status": true,
371 // Amount of indentation for nested items.
372 "indent_size": 20,
373 // Whether to reveal it in the outline panel automatically,
374 // when a corresponding outline entry becomes active.
375 // Gitignored entries are never auto revealed.
376 "auto_reveal_entries": true,
377 /// Whether to fold directories automatically
378 /// when a directory has only one directory inside.
379 "auto_fold_dirs": true
380 },
381 "collaboration_panel": {
382 // Whether to show the collaboration panel button in the status bar.
383 "button": true,
384 // Where to dock the collaboration panel. Can be 'left' or 'right'.
385 "dock": "left",
386 // Default width of the collaboration panel.
387 "default_width": 240
388 },
389 "chat_panel": {
390 // Whether to show the chat panel button in the status bar.
391 "button": true,
392 // Where to the chat panel. Can be 'left' or 'right'.
393 "dock": "right",
394 // Default width of the chat panel.
395 "default_width": 240
396 },
397 "message_editor": {
398 // Whether to automatically replace emoji shortcodes with emoji characters.
399 // For example: typing `:wave:` gets replaced with `👋`.
400 "auto_replace_emoji_shortcode": true
401 },
402 "notification_panel": {
403 // Whether to show the notification panel button in the status bar.
404 "button": true,
405 // Where to dock the notification panel. Can be 'left' or 'right'.
406 "dock": "right",
407 // Default width of the notification panel.
408 "default_width": 380
409 },
410 "assistant": {
411 // Version of this setting.
412 "version": "2",
413 // Whether the assistant is enabled.
414 "enabled": true,
415 // Whether to show the assistant panel button in the status bar.
416 "button": true,
417 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
418 "dock": "right",
419 // Default width when the assistant is docked to the left or right.
420 "default_width": 640,
421 // Default height when the assistant is docked to the bottom.
422 "default_height": 320,
423 // The default model to use when creating new contexts.
424 "default_model": {
425 // The provider to use.
426 "provider": "zed.dev",
427 // The model to use.
428 "model": "claude-3-5-sonnet"
429 }
430 },
431 // The settings for slash commands.
432 "slash_commands": {
433 // Settings for the `/docs` slash command.
434 "docs": {
435 // Whether `/docs` is enabled.
436 "enabled": false
437 },
438 // Settings for the `/project` slash command.
439 "project": {
440 // Whether `/project` is enabled.
441 "enabled": false
442 }
443 },
444 // Whether the screen sharing icon is shown in the os status bar.
445 "show_call_status_icon": true,
446 // Whether to use language servers to provide code intelligence.
447 "enable_language_server": true,
448 // Whether to perform linked edits of associated ranges, if the language server supports it.
449 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
450 "linked_edits": true,
451 // The list of language servers to use (or disable) for all languages.
452 //
453 // This is typically customized on a per-language basis.
454 "language_servers": ["..."],
455 // When to automatically save edited buffers. This setting can
456 // take four values.
457 //
458 // 1. Never automatically save:
459 // "autosave": "off",
460 // 2. Save when changing focus away from the Zed window:
461 // "autosave": "on_window_change",
462 // 3. Save when changing focus away from a specific buffer:
463 // "autosave": "on_focus_change",
464 // 4. Save when idle for a certain amount of time:
465 // "autosave": { "after_delay": {"milliseconds": 500} },
466 "autosave": "off",
467 // Settings related to the editor's tab bar.
468 "tab_bar": {
469 // Whether or not to show the tab bar in the editor
470 "show": true,
471 // Whether or not to show the navigation history buttons.
472 "show_nav_history_buttons": true
473 },
474 // Settings related to the editor's tabs
475 "tabs": {
476 // Show git status colors in the editor tabs.
477 "git_status": false,
478 // Position of the close button on the editor tabs.
479 "close_position": "right",
480 // Whether to show the file icon for a tab.
481 "file_icons": false
482 },
483 // Settings related to preview tabs.
484 "preview_tabs": {
485 // Whether preview tabs should be enabled.
486 // Preview tabs allow you to open files in preview mode, where they close automatically
487 // when you switch to another file unless you explicitly pin them.
488 // This is useful for quickly viewing files without cluttering your workspace.
489 "enabled": true,
490 // Whether to open tabs in preview mode when selected from the file finder.
491 "enable_preview_from_file_finder": false,
492 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
493 "enable_preview_from_code_navigation": false
494 },
495 // Whether or not to remove any trailing whitespace from lines of a buffer
496 // before saving it.
497 "remove_trailing_whitespace_on_save": true,
498 // Whether to start a new line with a comment when a previous line is a comment as well.
499 "extend_comment_on_newline": true,
500 // Whether or not to ensure there's a single newline at the end of a buffer
501 // when saving it.
502 "ensure_final_newline_on_save": true,
503 // Whether or not to perform a buffer format before saving
504 //
505 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
506 "format_on_save": "on",
507 // How to perform a buffer format. This setting can take 4 values:
508 //
509 // 1. Format code using the current language server:
510 // "formatter": "language_server"
511 // 2. Format code using an external command:
512 // "formatter": {
513 // "external": {
514 // "command": "prettier",
515 // "arguments": ["--stdin-filepath", "{buffer_path}"]
516 // }
517 // }
518 // 3. Format code using Zed's Prettier integration:
519 // "formatter": "prettier"
520 // 4. Default. Format files using Zed's Prettier integration (if applicable),
521 // or falling back to formatting via language server:
522 // "formatter": "auto"
523 "formatter": "auto",
524 // How to soft-wrap long lines of text.
525 // Possible values:
526 //
527 // 1. Do not soft wrap.
528 // "soft_wrap": "none",
529 // 2. Prefer a single line generally, unless an overly long line is encountered.
530 // "soft_wrap": "prefer_line",
531 // 3. Soft wrap lines that overflow the editor.
532 // "soft_wrap": "editor_width",
533 // 4. Soft wrap lines at the preferred line length.
534 // "soft_wrap": "preferred_line_length",
535 // 5. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
536 // "soft_wrap": "bounded",
537 "soft_wrap": "prefer_line",
538 // The column at which to soft-wrap lines, for buffers where soft-wrap
539 // is enabled.
540 "preferred_line_length": 80,
541 // Whether to indent lines using tab characters, as opposed to multiple
542 // spaces.
543 "hard_tabs": false,
544 // How many columns a tab should occupy.
545 "tab_size": 4,
546 // Control what info is collected by Zed.
547 "telemetry": {
548 // Send debug info like crash reports.
549 "diagnostics": true,
550 // Send anonymized usage data like what languages you're using Zed with.
551 "metrics": true
552 },
553 // Automatically update Zed. This setting may be ignored on Linux if
554 // installed through a package manager.
555 "auto_update": true,
556 // Diagnostics configuration.
557 "diagnostics": {
558 // Whether to show warnings or not by default.
559 "include_warnings": true
560 },
561 // Add files or globs of files that will be excluded by Zed entirely:
562 // they will be skipped during FS scan(s), file tree and file search
563 // will lack the corresponding file entries.
564 "file_scan_exclusions": [
565 "**/.git",
566 "**/.svn",
567 "**/.hg",
568 "**/CVS",
569 "**/.DS_Store",
570 "**/Thumbs.db",
571 "**/.classpath",
572 "**/.settings"
573 ],
574 // Git gutter behavior configuration.
575 "git": {
576 // Control whether the git gutter is shown. May take 2 values:
577 // 1. Show the gutter
578 // "git_gutter": "tracked_files"
579 // 2. Hide the gutter
580 // "git_gutter": "hide"
581 "git_gutter": "tracked_files",
582 // Control whether the git blame information is shown inline,
583 // in the currently focused line.
584 "inline_blame": {
585 "enabled": true
586 // Sets a delay after which the inline blame information is shown.
587 // Delay is restarted with every cursor movement.
588 // "delay_ms": 600
589 }
590 },
591 // Configuration for how direnv configuration should be loaded. May take 2 values:
592 // 1. Load direnv configuration through the shell hook, works for POSIX shells and fish.
593 // "load_direnv": "shell_hook"
594 // 2. Load direnv configuration using `direnv export json` directly.
595 // This can help with some shells that otherwise would not detect
596 // the direnv environment, such as nushell or elvish.
597 // "load_direnv": "direct"
598 "load_direnv": "shell_hook",
599 "inline_completions": {
600 // A list of globs representing files that inline completions should be disabled for.
601 "disabled_globs": [".env"]
602 },
603 // Settings specific to journaling
604 "journal": {
605 // The path of the directory where journal entries are stored
606 "path": "~",
607 // What format to display the hours in
608 // May take 2 values:
609 // 1. hour12
610 // 2. hour24
611 "hour_format": "hour12"
612 },
613 // Settings specific to the terminal
614 "terminal": {
615 // What shell to use when opening a terminal. May take 3 values:
616 // 1. Use the system's default terminal configuration in /etc/passwd
617 // "shell": "system"
618 // 2. A program:
619 // "shell": {
620 // "program": "sh"
621 // }
622 // 3. A program with arguments:
623 // "shell": {
624 // "with_arguments": {
625 // "program": "/bin/bash",
626 // "args": ["--login"]
627 // }
628 // }
629 "shell": "system",
630 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
631 "dock": "bottom",
632 // Default width when the terminal is docked to the left or right.
633 "default_width": 640,
634 // Default height when the terminal is docked to the bottom.
635 "default_height": 320,
636 // What working directory to use when launching the terminal.
637 // May take 4 values:
638 // 1. Use the current file's project directory. Will Fallback to the
639 // first project directory strategy if unsuccessful
640 // "working_directory": "current_project_directory"
641 // 2. Use the first project in this workspace's directory
642 // "working_directory": "first_project_directory"
643 // 3. Always use this platform's home directory (if we can find it)
644 // "working_directory": "always_home"
645 // 4. Always use a specific directory. This value will be shell expanded.
646 // If this path is not a valid directory the terminal will default to
647 // this platform's home directory (if we can find it)
648 // "working_directory": {
649 // "always": {
650 // "directory": "~/zed/projects/"
651 // }
652 // }
653 "working_directory": "current_project_directory",
654 // Set the cursor blinking behavior in the terminal.
655 // May take 3 values:
656 // 1. Never blink the cursor, ignoring the terminal mode
657 // "blinking": "off",
658 // 2. Default the cursor blink to off, but allow the terminal to
659 // set blinking
660 // "blinking": "terminal_controlled",
661 // 3. Always blink the cursor, ignoring the terminal mode
662 // "blinking": "on",
663 "blinking": "terminal_controlled",
664 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
665 // Alternate Scroll mode converts mouse scroll events into up / down key
666 // presses when in the alternate screen (e.g. when running applications
667 // like vim or less). The terminal can still set and unset this mode.
668 // May take 2 values:
669 // 1. Default alternate scroll mode to on
670 // "alternate_scroll": "on",
671 // 2. Default alternate scroll mode to off
672 // "alternate_scroll": "off",
673 "alternate_scroll": "off",
674 // Set whether the option key behaves as the meta key.
675 // May take 2 values:
676 // 1. Rely on default platform handling of option key, on macOS
677 // this means generating certain unicode characters
678 // "option_to_meta": false,
679 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
680 // "option_to_meta": true,
681 "option_as_meta": true,
682 // Whether or not selecting text in the terminal will automatically
683 // copy to the system clipboard.
684 "copy_on_select": false,
685 // Whether to show the terminal button in the status bar
686 "button": true,
687 // Any key-value pairs added to this list will be added to the terminal's
688 // environment. Use `:` to separate multiple values.
689 "env": {
690 // "KEY": "value1:value2"
691 },
692 // Set the terminal's line height.
693 // May take 3 values:
694 // 1. Use a line height that's comfortable for reading, 1.618
695 // "line_height": "comfortable"
696 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
697 // particularly if they use box characters
698 // "line_height": "standard",
699 // 3. Use a custom line height.
700 // "line_height": {
701 // "custom": 2
702 // },
703 "line_height": "comfortable",
704 // Activate the python virtual environment, if one is found, in the
705 // terminal's working directory (as resolved by the working_directory
706 // setting). Set this to "off" to disable this behavior.
707 "detect_venv": {
708 "on": {
709 // Default directories to search for virtual environments, relative
710 // to the current working directory. We recommend overriding this
711 // in your project's settings, rather than globally.
712 "directories": [".env", "env", ".venv", "venv"],
713 // Can also be `csh`, `fish`, `nushell` and `power_shell`
714 "activate_script": "default"
715 }
716 },
717 "toolbar": {
718 // Whether to display the terminal title in its toolbar.
719 "title": true
720 }
721 // Set the terminal's font size. If this option is not included,
722 // the terminal will default to matching the buffer's font size.
723 // "font_size": 15,
724 // Set the terminal's font family. If this option is not included,
725 // the terminal will default to matching the buffer's font family.
726 // "font_family": "Zed Plex Mono",
727 // Set the terminal's font fallbacks. If this option is not included,
728 // the terminal will default to matching the buffer's font fallbacks.
729 // This will be merged with the platform's default font fallbacks
730 // "font_fallbacks": ["FiraCode Nerd Fonts"],
731 // Sets the maximum number of lines in the terminal's scrollback buffer.
732 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
733 // Existing terminals will not pick up this change until they are recreated.
734 // "max_scroll_history_lines": 10000,
735 },
736 "code_actions_on_format": {},
737 /// Settings related to running tasks.
738 "tasks": {
739 "variables": {}
740 },
741 // An object whose keys are language names, and whose values
742 // are arrays of filenames or extensions of files that should
743 // use those languages.
744 //
745 // For example, to treat files like `foo.notjs` as JavaScript,
746 // and `Embargo.lock` as TOML:
747 //
748 // {
749 // "JavaScript": ["notjs"],
750 // "TOML": ["Embargo.lock"]
751 // }
752 //
753 "file_types": {
754 "JSON": ["flake.lock"],
755 "JSONC": [
756 "**/.zed/**/*.json",
757 "**/zed/**/*.json",
758 "**/Zed/**/*.json",
759 "tsconfig.json",
760 "pyrightconfig.json"
761 ]
762 },
763 // The extensions that Zed should automatically install on startup.
764 //
765 // If you don't want any of these extensions, add this field to your settings
766 // and change the value to `false`.
767 "auto_install_extensions": {
768 "html": true
769 },
770 // Different settings for specific languages.
771 "languages": {
772 "Astro": {
773 "prettier": {
774 "allowed": true,
775 "plugins": ["prettier-plugin-astro"]
776 }
777 },
778 "Blade": {
779 "prettier": {
780 "allowed": true
781 }
782 },
783 "C": {
784 "format_on_save": "off",
785 "use_on_type_format": false
786 },
787 "C++": {
788 "format_on_save": "off",
789 "use_on_type_format": false
790 },
791 "CSS": {
792 "prettier": {
793 "allowed": true
794 }
795 },
796 "Elixir": {
797 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
798 },
799 "Erlang": {
800 "language_servers": ["erlang-ls", "!elp", "..."]
801 },
802 "Go": {
803 "code_actions_on_format": {
804 "source.organizeImports": true
805 }
806 },
807 "GraphQL": {
808 "prettier": {
809 "allowed": true
810 }
811 },
812 "HEEX": {
813 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
814 },
815 "HTML": {
816 "prettier": {
817 "allowed": true
818 }
819 },
820 "Java": {
821 "prettier": {
822 "allowed": true,
823 "plugins": ["prettier-plugin-java"]
824 }
825 },
826 "JavaScript": {
827 "language_servers": ["!typescript-language-server", "vtsls", "..."],
828 "prettier": {
829 "allowed": true
830 }
831 },
832 "JSON": {
833 "prettier": {
834 "allowed": true
835 }
836 },
837 "JSONC": {
838 "prettier": {
839 "allowed": true
840 }
841 },
842 "Markdown": {
843 "format_on_save": "off",
844 "use_on_type_format": false,
845 "prettier": {
846 "allowed": true
847 }
848 },
849 "PHP": {
850 "language_servers": ["phpactor", "!intelephense", "..."],
851 "prettier": {
852 "allowed": true,
853 "plugins": ["@prettier/plugin-php"],
854 "parser": "php"
855 }
856 },
857 "Ruby": {
858 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
859 },
860 "SCSS": {
861 "prettier": {
862 "allowed": true
863 }
864 },
865 "SQL": {
866 "prettier": {
867 "allowed": true,
868 "plugins": ["prettier-plugin-sql"]
869 }
870 },
871 "Starlark": {
872 "language_servers": ["starpls", "!buck2-lsp", "..."]
873 },
874 "Svelte": {
875 "language_servers": ["svelte-language-server", "..."],
876 "prettier": {
877 "allowed": true,
878 "plugins": ["prettier-plugin-svelte"]
879 }
880 },
881 "TSX": {
882 "language_servers": ["!typescript-language-server", "vtsls", "..."],
883 "prettier": {
884 "allowed": true
885 }
886 },
887 "Twig": {
888 "prettier": {
889 "allowed": true
890 }
891 },
892 "TypeScript": {
893 "language_servers": ["!typescript-language-server", "vtsls", "..."],
894 "prettier": {
895 "allowed": true
896 }
897 },
898 "Vue.js": {
899 "language_servers": ["vue-language-server", "..."],
900 "prettier": {
901 "allowed": true
902 }
903 },
904 "XML": {
905 "prettier": {
906 "allowed": true,
907 "plugins": ["@prettier/plugin-xml"]
908 }
909 },
910 "YAML": {
911 "prettier": {
912 "allowed": true
913 }
914 }
915 },
916 // Different settings for specific language models.
917 "language_models": {
918 "anthropic": {
919 "version": "1",
920 "api_url": "https://api.anthropic.com"
921 },
922 "google": {
923 "api_url": "https://generativelanguage.googleapis.com"
924 },
925 "ollama": {
926 "api_url": "http://localhost:11434",
927 "low_speed_timeout_in_seconds": 60
928 },
929 "openai": {
930 "version": "1",
931 "api_url": "https://api.openai.com/v1",
932 "low_speed_timeout_in_seconds": 600
933 }
934 },
935 // Zed's Prettier integration settings.
936 // Allows to enable/disable formatting with Prettier
937 // and configure default Prettier, used when no project-level Prettier installation is found.
938 "prettier": {
939 // // Whether to consider prettier formatter or not when attempting to format a file.
940 // "allowed": false,
941 //
942 // // Use regular Prettier json configuration.
943 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
944 // // the project has no other Prettier installed.
945 // "plugins": [],
946 //
947 // // Use regular Prettier json configuration.
948 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
949 // // the project has no other Prettier installed.
950 // "trailingComma": "es5",
951 // "tabWidth": 4,
952 // "semi": false,
953 // "singleQuote": true
954 },
955 // LSP Specific settings.
956 "lsp": {
957 // Specify the LSP name as a key here.
958 // "rust-analyzer": {
959 // // These initialization options are merged into Zed's defaults
960 // "initialization_options": {
961 // "check": {
962 // "command": "clippy" // rust-analyzer.check.command (default: "check")
963 // }
964 // }
965 // }
966 },
967 // Jupyter settings
968 "jupyter": {
969 "enabled": true
970 // Specify the language name as the key and the kernel name as the value.
971 // "kernel_selections": {
972 // "python": "conda-base"
973 // "typescript": "deno"
974 // }
975 },
976 // Vim settings
977 "vim": {
978 "toggle_relative_line_numbers": false,
979 "use_system_clipboard": "always",
980 "use_multiline_find": false,
981 "use_smartcase_find": false,
982 "custom_digraphs": {}
983 },
984 // The server to connect to. If the environment variable
985 // ZED_SERVER_URL is set, it will override this setting.
986 "server_url": "https://zed.dev",
987 // Settings overrides to use when using Zed Preview.
988 // Mostly useful for developers who are managing multiple instances of Zed.
989 "preview": {
990 // "theme": "Andromeda"
991 },
992 // Settings overrides to use when using Zed Nightly.
993 // Mostly useful for developers who are managing multiple instances of Zed.
994 "nightly": {
995 // "theme": "Andromeda"
996 },
997 // Settings overrides to use when using Zed Stable.
998 // Mostly useful for developers who are managing multiple instances of Zed.
999 "stable": {
1000 // "theme": "Andromeda"
1001 },
1002 // Settings overrides to use when using Zed Dev.
1003 // Mostly useful for developers who are managing multiple instances of Zed.
1004 "dev": {
1005 // "theme": "Andromeda"
1006 },
1007 // Task-related settings.
1008 "task": {
1009 // Whether to show task status indicator in the status bar. Default: true
1010 "show_status_indicator": true
1011 },
1012 // Whether to show full labels in line indicator or short ones
1013 //
1014 // Values:
1015 // - `short`: "2 s, 15 l, 32 c"
1016 // - `long`: "2 selections, 15 lines, 32 characters"
1017 // Default: long
1018 "line_indicator_format": "long",
1019 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1020 //
1021 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1022 // `socks5h`. `http` will be used when no scheme is specified.
1023 //
1024 // By default no proxy will be used, or Zed will try get proxy settings from
1025 // environment variables.
1026 //
1027 // Examples:
1028 // - "proxy": "socks5://localhost:10808"
1029 // - "proxy": "http://127.0.0.1:10809"
1030 "proxy": null,
1031 // Set to configure aliases for the command palette.
1032 // When typing a query which is a key of this object, the value will be used instead.
1033 //
1034 // Examples:
1035 // {
1036 // "W": "workspace::Save"
1037 // }
1038 "command_aliases": {},
1039 // ssh_connections is an array of ssh connections.
1040 // By default this setting is null, which disables the direct ssh connection support.
1041 // You can configure these from `project: Open Remote` in the command palette.
1042 // Zed's ssh support will pull configuration from your ~/.ssh too.
1043 // Examples:
1044 // [
1045 // {
1046 // "host": "example-box",
1047 // "projects": [
1048 // {
1049 // "paths": ["/home/user/code/zed"]
1050 // }
1051 // ]
1052 // }
1053 // ]
1054 "ssh_connections": null,
1055 // Configures the Context Server Protocol binaries
1056 //
1057 // Examples:
1058 // {
1059 // "id": "server-1",
1060 // "executable": "/path",
1061 // "args": ['arg1", "args2"]
1062 // }
1063 "experimental.context_servers": {
1064 "servers": []
1065 }
1066}