1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 // The name of a base set of key bindings to use.
14 // This setting can take four values, each named after another
15 // text editor:
16 //
17 // 1. "VSCode"
18 // 2. "Atom"
19 // 3. "JetBrains"
20 // 4. "None"
21 // 5. "SublimeText"
22 // 6. "TextMate"
23 "base_keymap": "VSCode",
24 // Features that can be globally enabled or disabled
25 "features": {
26 // Which inline completion provider to use.
27 "inline_completion_provider": "copilot"
28 },
29 // The name of a font to use for rendering text in the editor
30 "buffer_font_family": "Zed Plex Mono",
31 // Set the buffer text's font fallbacks, this will be merged with
32 // the platform's default fallbacks.
33 "buffer_font_fallbacks": null,
34 // The OpenType features to enable for text in the editor.
35 "buffer_font_features": {
36 // Disable ligatures:
37 // "calt": false
38 },
39 // The default font size for text in the editor
40 "buffer_font_size": 15,
41 // The weight of the editor font in standard CSS units from 100 to 900.
42 "buffer_font_weight": 400,
43 // Set the buffer's line height.
44 // May take 3 values:
45 // 1. Use a line height that's comfortable for reading (1.618)
46 // "buffer_line_height": "comfortable"
47 // 2. Use a standard line height, (1.3)
48 // "buffer_line_height": "standard",
49 // 3. Use a custom line height
50 // "buffer_line_height": {
51 // "custom": 2
52 // },
53 "buffer_line_height": "comfortable",
54 // The name of a font to use for rendering text in the UI
55 // You can set this to ".SystemUIFont" to use the system font
56 "ui_font_family": "Zed Plex Sans",
57 // Set the UI's font fallbacks, this will be merged with the platform's
58 // default font fallbacks.
59 "ui_font_fallbacks": null,
60 // The OpenType features to enable for text in the UI
61 "ui_font_features": {
62 // Disable ligatures:
63 "calt": false
64 },
65 // The weight of the UI font in standard CSS units from 100 to 900.
66 "ui_font_weight": 400,
67 // The default font size for text in the UI
68 "ui_font_size": 16,
69 // How much to fade out unused code.
70 "unnecessary_code_fade": 0.3,
71 // Active pane styling settings.
72 "active_pane_modifiers": {
73 // The factor to grow the active pane by. Defaults to 1.0
74 // which gives the same size as all other panes.
75 "magnification": 1.0,
76 // Inset border size of the active pane, in pixels.
77 "border_size": 0.0,
78 // Opacity of the inactive panes. 0 means transparent, 1 means opaque.
79 // Values are clamped to the [0.0, 1.0] range.
80 "inactive_opacity": 1.0
81 },
82 // The direction that you want to split panes horizontally. Defaults to "up"
83 "pane_split_direction_horizontal": "up",
84 // The direction that you want to split panes horizontally. Defaults to "left"
85 "pane_split_direction_vertical": "left",
86 // Centered layout related settings.
87 "centered_layout": {
88 // The relative width of the left padding of the central pane from the
89 // workspace when the centered layout is used.
90 "left_padding": 0.2,
91 // The relative width of the right padding of the central pane from the
92 // workspace when the centered layout is used.
93 "right_padding": 0.2
94 },
95 // The key to use for adding multiple cursors
96 // Currently "alt" or "cmd_or_ctrl" (also aliased as
97 // "cmd" and "ctrl") are supported.
98 "multi_cursor_modifier": "alt",
99 // Whether to enable vim modes and key bindings.
100 "vim_mode": false,
101 // Whether to show the informational hover box when moving the mouse
102 // over symbols in the editor.
103 "hover_popover_enabled": true,
104 // Whether to confirm before quitting Zed.
105 "confirm_quit": false,
106 // Whether to restore last closed project when fresh Zed instance is opened.
107 "restore_on_startup": "last_session",
108 // Size of the drop target in the editor.
109 "drop_target_size": 0.2,
110 // Whether the window should be closed when using 'close active item' on a window with no tabs.
111 // May take 3 values:
112 // 1. Use the current platform's convention
113 // "when_closing_with_no_tabs": "platform_default"
114 // 2. Always close the window:
115 // "when_closing_with_no_tabs": "close_window",
116 // 3. Never close the window
117 // "when_closing_with_no_tabs": "keep_window_open",
118 "when_closing_with_no_tabs": "platform_default",
119 // Whether to use the system provided dialogs for Open and Save As.
120 // When set to false, Zed will use the built-in keyboard-first pickers.
121 "use_system_path_prompts": true,
122 // Whether the cursor blinks in the editor.
123 "cursor_blink": true,
124 // Cursor shape for the default editor.
125 // 1. A vertical bar
126 // "bar"
127 // 2. A block that surrounds the following character
128 // "block"
129 // 3. An underline / underscore that runs along the following character
130 // "underline"
131 // 4. A box drawn around the following character
132 // "hollow"
133 //
134 // Default: not set, defaults to "bar"
135 "cursor_shape": null,
136 // How to highlight the current line in the editor.
137 //
138 // 1. Don't highlight the current line:
139 // "none"
140 // 2. Highlight the gutter area:
141 // "gutter"
142 // 3. Highlight the editor area:
143 // "line"
144 // 4. Highlight the full line (default):
145 // "all"
146 "current_line_highlight": "all",
147 // Whether to pop the completions menu while typing in an editor without
148 // explicitly requesting it.
149 "show_completions_on_input": true,
150 // Whether to display inline and alongside documentation for items in the
151 // completions menu
152 "show_completion_documentation": true,
153 // The debounce delay before re-querying the language server for completion
154 // documentation when not included in original completion list.
155 "completion_documentation_secondary_query_debounce": 300,
156 // Show method signatures in the editor, when inside parentheses.
157 "auto_signature_help": false,
158 /// Whether to show the signature help after completion or a bracket pair inserted.
159 /// If `auto_signature_help` is enabled, this setting will be treated as enabled also.
160 "show_signature_help_after_edits": false,
161 // Whether to show wrap guides (vertical rulers) in the editor.
162 // Setting this to true will show a guide at the 'preferred_line_length' value
163 // if 'soft_wrap' is set to 'preferred_line_length', and will show any
164 // additional guides as specified by the 'wrap_guides' setting.
165 "show_wrap_guides": true,
166 // Character counts at which to show wrap guides in the editor.
167 "wrap_guides": [],
168 // Hide the values of in variables from visual display in private files
169 "redact_private_values": false,
170 // The default number of lines to expand excerpts in the multibuffer by.
171 "expand_excerpt_lines": 3,
172 // Globs to match against file paths to determine if a file is private.
173 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
174 // Whether to use additional LSP queries to format (and amend) the code after
175 // every "trigger" symbol input, defined by LSP server capabilities.
176 "use_on_type_format": true,
177 // Whether to automatically add matching closing characters when typing
178 // opening parenthesis, bracket, brace, single or double quote characters.
179 // For example, when you type (, Zed will add a closing ) at the correct position.
180 "use_autoclose": true,
181 // Whether to automatically surround selected text when typing opening parenthesis,
182 // bracket, brace, single or double quote characters.
183 // For example, when you select text and type (, Zed will surround the text with ().
184 "use_auto_surround": true,
185 // Whether indentation of pasted content should be adjusted based on the context.
186 "auto_indent_on_paste": true,
187 // Controls how the editor handles the autoclosed characters.
188 // When set to `false`(default), skipping over and auto-removing of the closing characters
189 // happen only for auto-inserted characters.
190 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
191 // no matter how they were inserted.
192 "always_treat_brackets_as_autoclosed": false,
193 // Controls whether inline completions are shown immediately (true)
194 // or manually by triggering `editor::ShowInlineCompletion` (false).
195 "show_inline_completions": true,
196 // Controls whether inline completions are shown in a given language scope.
197 // Example: ["string", "comment"]
198 "inline_completions_disabled_in": [],
199 // Whether to show tabs and spaces in the editor.
200 // This setting can take three values:
201 //
202 // 1. Draw tabs and spaces only for the selected text (default):
203 // "selection"
204 // 2. Do not draw any tabs or spaces:
205 // "none"
206 // 3. Draw all invisible symbols:
207 // "all"
208 // 4. Draw whitespaces at boundaries only:
209 // "boundary"
210 // For a whitespace to be on a boundary, any of the following conditions need to be met:
211 // - It is a tab
212 // - It is adjacent to an edge (start or end)
213 // - It is adjacent to a whitespace (left or right)
214 "show_whitespaces": "selection",
215 // Settings related to calls in Zed
216 "calls": {
217 // Join calls with the microphone live by default
218 "mute_on_join": false,
219 // Share your project when you are the first to join a channel
220 "share_on_join": false
221 },
222 // Toolbar related settings
223 "toolbar": {
224 // Whether to show breadcrumbs.
225 "breadcrumbs": true,
226 // Whether to show quick action buttons.
227 "quick_actions": true,
228 // Whether to show the Selections menu in the editor toolbar
229 "selections_menu": true
230 },
231 // Scrollbar related settings
232 "scrollbar": {
233 // When to show the scrollbar in the editor.
234 // This setting can take four values:
235 //
236 // 1. Show the scrollbar if there's important information or
237 // follow the system's configured behavior (default):
238 // "auto"
239 // 2. Match the system's configured behavior:
240 // "system"
241 // 3. Always show the scrollbar:
242 // "always"
243 // 4. Never show the scrollbar:
244 // "never"
245 "show": "auto",
246 // Whether to show cursor positions in the scrollbar.
247 "cursors": true,
248 // Whether to show git diff indicators in the scrollbar.
249 "git_diff": true,
250 // Whether to show buffer search results in the scrollbar.
251 "search_results": true,
252 // Whether to show selected symbol occurrences in the scrollbar.
253 "selected_symbol": true,
254 // Whether to show diagnostic indicators in the scrollbar.
255 "diagnostics": true
256 },
257 // Enable middle-click paste on Linux.
258 "middle_click_paste": true,
259 // What to do when multibuffer is double clicked in some of its excerpts
260 // (parts of singleton buffers).
261 // May take 2 values:
262 // 1. Behave as a regular buffer and select the whole word (default).
263 // "double_click_in_multibuffer": "select"
264 // 2. Open the excerpt clicked as a new buffer in the new tab.
265 // "double_click_in_multibuffer": "open",
266 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
267 "double_click_in_multibuffer": "select",
268 "gutter": {
269 // Whether to show line numbers in the gutter.
270 "line_numbers": true,
271 // Whether to show code action buttons in the gutter.
272 "code_actions": true,
273 // Whether to show runnables buttons in the gutter.
274 "runnables": true,
275 // Whether to show fold buttons in the gutter.
276 "folds": true
277 },
278 "indent_guides": {
279 /// Whether to show indent guides in the editor.
280 "enabled": true,
281 /// The width of the indent guides in pixels, between 1 and 10.
282 "line_width": 1,
283 /// The width of the active indent guide in pixels, between 1 and 10.
284 "active_line_width": 1,
285 /// Determines how indent guides are colored.
286 /// This setting can take the following three values:
287 ///
288 /// 1. "disabled"
289 /// 2. "fixed"
290 /// 3. "indent_aware"
291 "coloring": "fixed",
292 /// Determines how indent guide backgrounds are colored.
293 /// This setting can take the following two values:
294 ///
295 /// 1. "disabled"
296 /// 2. "indent_aware"
297 "background_coloring": "disabled"
298 },
299 // Whether the editor will scroll beyond the last line.
300 "scroll_beyond_last_line": "one_page",
301 // The number of lines to keep above/below the cursor when scrolling.
302 "vertical_scroll_margin": 3,
303 // Whether to scroll when clicking near the edge of the visible text area.
304 "autoscroll_on_clicks": false,
305 // Scroll sensitivity multiplier. This multiplier is applied
306 // to both the horizontal and vertical delta values while scrolling.
307 "scroll_sensitivity": 1.0,
308 "relative_line_numbers": false,
309 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
310 "search_wrap": true,
311 // Search options to enable by default when opening new project and buffer searches.
312 "search": {
313 "whole_word": false,
314 "case_sensitive": false,
315 "include_ignored": false,
316 "regex": false
317 },
318 // When to populate a new search's query based on the text under the cursor.
319 // This setting can take the following three values:
320 //
321 // 1. Always populate the search query with the word under the cursor (default).
322 // "always"
323 // 2. Only populate the search query when there is text selected
324 // "selection"
325 // 3. Never populate the search query
326 // "never"
327 "seed_search_query_from_cursor": "always",
328 "use_smartcase_search": false,
329 // Inlay hint related settings
330 "inlay_hints": {
331 // Global switch to toggle hints on and off, switched off by default.
332 "enabled": false,
333 // Toggle certain types of hints on and off, all switched on by default.
334 "show_type_hints": true,
335 "show_parameter_hints": true,
336 // Corresponds to null/None LSP hint type value.
337 "show_other_hints": true,
338 // Whether to show a background for inlay hints.
339 //
340 // If set to `true`, the background will use the `hint.background` color from the current theme.
341 "show_background": false,
342 // Time to wait after editing the buffer, before requesting the hints,
343 // set to 0 to disable debouncing.
344 "edit_debounce_ms": 700,
345 // Time to wait after scrolling the buffer, before requesting the hints,
346 // set to 0 to disable debouncing.
347 "scroll_debounce_ms": 50
348 },
349 "project_panel": {
350 // Whether to show the project panel button in the status bar
351 "button": true,
352 // Default width of the project panel.
353 "default_width": 240,
354 // Where to dock the project panel. Can be 'left' or 'right'.
355 "dock": "left",
356 // Whether to show file icons in the project panel.
357 "file_icons": true,
358 // Whether to show folder icons or chevrons for directories in the project panel.
359 "folder_icons": true,
360 // Whether to show the git status in the project panel.
361 "git_status": true,
362 // Amount of indentation for nested items.
363 "indent_size": 20,
364 // Whether to reveal it in the project panel automatically,
365 // when a corresponding project entry becomes active.
366 // Gitignored entries are never auto revealed.
367 "auto_reveal_entries": true,
368 // Whether to fold directories automatically and show compact folders
369 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
370 "auto_fold_dirs": true,
371 /// Scrollbar-related settings
372 "scrollbar": {
373 /// When to show the scrollbar in the project panel.
374 /// This setting can take four values:
375 ///
376 /// 1. null (default): Inherit editor settings
377 /// 2. Show the scrollbar if there's important information or
378 /// follow the system's configured behavior (default):
379 /// "auto"
380 /// 3. Match the system's configured behavior:
381 /// "system"
382 /// 4. Always show the scrollbar:
383 /// "always"
384 /// 5. Never show the scrollbar:
385 /// "never"
386 "show": null
387 },
388 /// Which files containing diagnostic errors/warnings to mark in the project panel.
389 /// This setting can take the following three values:
390 ///
391 /// 1. Do not mark any files:
392 /// "off"
393 /// 2. Only mark files with errors:
394 /// "errors"
395 /// 3. Mark files with errors and warnings:
396 /// "all"
397 "show_diagnostics": "all",
398 // Settings related to indent guides in the project panel.
399 "indent_guides": {
400 // When to show indent guides in the project panel.
401 // This setting can take two values:
402 //
403 // 1. Always show indent guides:
404 // "always"
405 // 2. Never show indent guides:
406 // "never"
407 "show": "always"
408 }
409 },
410 "outline_panel": {
411 // Whether to show the outline panel button in the status bar
412 "button": true,
413 // Default width of the outline panel.
414 "default_width": 300,
415 // Where to dock the outline panel. Can be 'left' or 'right'.
416 "dock": "left",
417 // Whether to show file icons in the outline panel.
418 "file_icons": true,
419 // Whether to show folder icons or chevrons for directories in the outline panel.
420 "folder_icons": true,
421 // Whether to show the git status in the outline panel.
422 "git_status": true,
423 // Amount of indentation for nested items.
424 "indent_size": 20,
425 // Whether to reveal it in the outline panel automatically,
426 // when a corresponding outline entry becomes active.
427 // Gitignored entries are never auto revealed.
428 "auto_reveal_entries": true,
429 /// Whether to fold directories automatically
430 /// when a directory has only one directory inside.
431 "auto_fold_dirs": true,
432 // Settings related to indent guides in the outline panel.
433 "indent_guides": {
434 // When to show indent guides in the outline panel.
435 // This setting can take two values:
436 //
437 // 1. Always show indent guides:
438 // "always"
439 // 2. Never show indent guides:
440 // "never"
441 "show": "always"
442 },
443 /// Scrollbar-related settings
444 "scrollbar": {
445 /// When to show the scrollbar in the project panel.
446 /// This setting can take four values:
447 ///
448 /// 1. null (default): Inherit editor settings
449 /// 2. Show the scrollbar if there's important information or
450 /// follow the system's configured behavior (default):
451 /// "auto"
452 /// 3. Match the system's configured behavior:
453 /// "system"
454 /// 4. Always show the scrollbar:
455 /// "always"
456 /// 5. Never show the scrollbar:
457 /// "never"
458 "show": null
459 }
460 },
461 "collaboration_panel": {
462 // Whether to show the collaboration panel button in the status bar.
463 "button": true,
464 // Where to dock the collaboration panel. Can be 'left' or 'right'.
465 "dock": "left",
466 // Default width of the collaboration panel.
467 "default_width": 240
468 },
469 "chat_panel": {
470 // Whether to show the chat panel button in the status bar.
471 "button": true,
472 // Where to the chat panel. Can be 'left' or 'right'.
473 "dock": "right",
474 // Default width of the chat panel.
475 "default_width": 240
476 },
477 "message_editor": {
478 // Whether to automatically replace emoji shortcodes with emoji characters.
479 // For example: typing `:wave:` gets replaced with `👋`.
480 "auto_replace_emoji_shortcode": true
481 },
482 "notification_panel": {
483 // Whether to show the notification panel button in the status bar.
484 "button": true,
485 // Where to dock the notification panel. Can be 'left' or 'right'.
486 "dock": "right",
487 // Default width of the notification panel.
488 "default_width": 380
489 },
490 "assistant": {
491 // Version of this setting.
492 "version": "2",
493 // Whether the assistant is enabled.
494 "enabled": true,
495 // Whether to show the assistant panel button in the status bar.
496 "button": true,
497 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
498 "dock": "right",
499 // Default width when the assistant is docked to the left or right.
500 "default_width": 640,
501 // Default height when the assistant is docked to the bottom.
502 "default_height": 320,
503 // The default model to use when creating new chats.
504 "default_model": {
505 // The provider to use.
506 "provider": "zed.dev",
507 // The model to use.
508 "model": "claude-3-5-sonnet"
509 }
510 },
511 // The settings for slash commands.
512 "slash_commands": {
513 // Settings for the `/docs` slash command.
514 "docs": {
515 // Whether `/docs` is enabled.
516 "enabled": false
517 },
518 // Settings for the `/project` slash command.
519 "project": {
520 // Whether `/project` is enabled.
521 "enabled": false
522 }
523 },
524 // Whether the screen sharing icon is shown in the os status bar.
525 "show_call_status_icon": true,
526 // Whether to use language servers to provide code intelligence.
527 "enable_language_server": true,
528 // Whether to perform linked edits of associated ranges, if the language server supports it.
529 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
530 "linked_edits": true,
531 // The list of language servers to use (or disable) for all languages.
532 //
533 // This is typically customized on a per-language basis.
534 "language_servers": ["..."],
535 // When to automatically save edited buffers. This setting can
536 // take four values.
537 //
538 // 1. Never automatically save:
539 // "autosave": "off",
540 // 2. Save when changing focus away from the Zed window:
541 // "autosave": "on_window_change",
542 // 3. Save when changing focus away from a specific buffer:
543 // "autosave": "on_focus_change",
544 // 4. Save when idle for a certain amount of time:
545 // "autosave": { "after_delay": {"milliseconds": 500} },
546 "autosave": "off",
547 // Settings related to the editor's tab bar.
548 "tab_bar": {
549 // Whether or not to show the tab bar in the editor
550 "show": true,
551 // Whether or not to show the navigation history buttons.
552 "show_nav_history_buttons": true
553 },
554 // Settings related to the editor's tabs
555 "tabs": {
556 // Show git status colors in the editor tabs.
557 "git_status": false,
558 // Position of the close button on the editor tabs.
559 "close_position": "right",
560 // Whether to show the file icon for a tab.
561 "file_icons": false,
562 // Whether to always show the close button on tabs.
563 "always_show_close_button": false,
564 // What to do after closing the current tab.
565 //
566 // 1. Activate the tab that was open previously (default)
567 // "History"
568 // 2. Activate the neighbour tab (prefers the right one, if present)
569 // "Neighbour"
570 "activate_on_close": "history",
571 /// Which files containing diagnostic errors/warnings to mark in the tabs.
572 /// This setting can take the following three values:
573 ///
574 /// 1. Do not mark any files:
575 /// "off"
576 /// 2. Only mark files with errors:
577 /// "errors"
578 /// 3. Mark files with errors and warnings:
579 /// "all"
580 "show_diagnostics": "all"
581 },
582 // Settings related to preview tabs.
583 "preview_tabs": {
584 // Whether preview tabs should be enabled.
585 // Preview tabs allow you to open files in preview mode, where they close automatically
586 // when you switch to another file unless you explicitly pin them.
587 // This is useful for quickly viewing files without cluttering your workspace.
588 "enabled": true,
589 // Whether to open tabs in preview mode when selected from the file finder.
590 "enable_preview_from_file_finder": false,
591 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
592 "enable_preview_from_code_navigation": false
593 },
594 // Settings related to the file finder.
595 "file_finder": {
596 // Whether to show file icons in the file finder.
597 "file_icons": true,
598 // Determines how much space the file finder can take up in relation to the available window width.
599 // There are 5 possible width values:
600 //
601 // 1. Small: This value is essentially a fixed width.
602 // "modal_width": "small"
603 // 2. Medium:
604 // "modal_width": "medium"
605 // 3. Large:
606 // "modal_width": "large"
607 // 4. Extra Large:
608 // "modal_width": "xlarge"
609 // 5. Fullscreen: This value removes any horizontal padding, as it consumes the whole viewport width.
610 // "modal_width": "full"
611 //
612 // Default: small
613 "modal_max_width": "small"
614 },
615 // Whether or not to remove any trailing whitespace from lines of a buffer
616 // before saving it.
617 "remove_trailing_whitespace_on_save": true,
618 // Whether to start a new line with a comment when a previous line is a comment as well.
619 "extend_comment_on_newline": true,
620 // Whether or not to ensure there's a single newline at the end of a buffer
621 // when saving it.
622 "ensure_final_newline_on_save": true,
623 // Whether or not to perform a buffer format before saving
624 //
625 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
626 "format_on_save": "on",
627 // How to perform a buffer format. This setting can take 4 values:
628 //
629 // 1. Format code using the current language server:
630 // "formatter": "language_server"
631 // 2. Format code using an external command:
632 // "formatter": {
633 // "external": {
634 // "command": "prettier",
635 // "arguments": ["--stdin-filepath", "{buffer_path}"]
636 // }
637 // }
638 // 3. Format code using Zed's Prettier integration:
639 // "formatter": "prettier"
640 // 4. Default. Format files using Zed's Prettier integration (if applicable),
641 // or falling back to formatting via language server:
642 // "formatter": "auto"
643 "formatter": "auto",
644 // How to soft-wrap long lines of text.
645 // Possible values:
646 //
647 // 1. Prefer a single line generally, unless an overly long line is encountered.
648 // "soft_wrap": "none",
649 // "soft_wrap": "prefer_line", // (deprecated, same as "none")
650 // 2. Soft wrap lines that overflow the editor.
651 // "soft_wrap": "editor_width",
652 // 3. Soft wrap lines at the preferred line length.
653 // "soft_wrap": "preferred_line_length",
654 // 4. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
655 // "soft_wrap": "bounded",
656 "soft_wrap": "none",
657 // The column at which to soft-wrap lines, for buffers where soft-wrap
658 // is enabled.
659 "preferred_line_length": 80,
660 // Whether to indent lines using tab characters, as opposed to multiple
661 // spaces.
662 "hard_tabs": false,
663 // How many columns a tab should occupy.
664 "tab_size": 4,
665 // Control what info is collected by Zed.
666 "telemetry": {
667 // Send debug info like crash reports.
668 "diagnostics": true,
669 // Send anonymized usage data like what languages you're using Zed with.
670 "metrics": true
671 },
672 // Automatically update Zed. This setting may be ignored on Linux if
673 // installed through a package manager.
674 "auto_update": true,
675 // Diagnostics configuration.
676 "diagnostics": {
677 // Whether to show warnings or not by default.
678 "include_warnings": true
679 },
680 // Add files or globs of files that will be excluded by Zed entirely:
681 // they will be skipped during FS scan(s), file tree and file search
682 // will lack the corresponding file entries. Overrides `file_scan_inclusions`.
683 "file_scan_exclusions": [
684 "**/.git",
685 "**/.svn",
686 "**/.hg",
687 "**/CVS",
688 "**/.DS_Store",
689 "**/Thumbs.db",
690 "**/.classpath",
691 "**/.settings"
692 ],
693 // Add files or globs of files that will be included by Zed, even when
694 // ignored by git. This is useful for files that are not tracked by git,
695 // but are still important to your project. Note that globs that are
696 // overly broad can slow down Zed's file scanning. Overridden by `file_scan_exclusions`.
697 "file_scan_inclusions": [".env*"],
698 // Git gutter behavior configuration.
699 "git": {
700 // Control whether the git gutter is shown. May take 2 values:
701 // 1. Show the gutter
702 // "git_gutter": "tracked_files"
703 // 2. Hide the gutter
704 // "git_gutter": "hide"
705 "git_gutter": "tracked_files",
706 // Control whether the git blame information is shown inline,
707 // in the currently focused line.
708 "inline_blame": {
709 "enabled": true
710 // Sets a delay after which the inline blame information is shown.
711 // Delay is restarted with every cursor movement.
712 // "delay_ms": 600
713 //
714 // Whether or not do display the git commit summary on the same line.
715 // "show_commit_summary": false
716 //
717 // The minimum column number to show the inline blame information at
718 // "min_column": 0
719 }
720 },
721 // Configuration for how direnv configuration should be loaded. May take 2 values:
722 // 1. Load direnv configuration using `direnv export json` directly.
723 // "load_direnv": "direct"
724 // 2. Load direnv configuration through the shell hook, works for POSIX shells and fish.
725 // "load_direnv": "shell_hook"
726 "load_direnv": "direct",
727 "inline_completions": {
728 // A list of globs representing files that inline completions should be disabled for.
729 "disabled_globs": [".env"]
730 },
731 // Settings specific to journaling
732 "journal": {
733 // The path of the directory where journal entries are stored
734 "path": "~",
735 // What format to display the hours in
736 // May take 2 values:
737 // 1. hour12
738 // 2. hour24
739 "hour_format": "hour12"
740 },
741 // Settings specific to the terminal
742 "terminal": {
743 // What shell to use when opening a terminal. May take 3 values:
744 // 1. Use the system's default terminal configuration in /etc/passwd
745 // "shell": "system"
746 // 2. A program:
747 // "shell": {
748 // "program": "sh"
749 // }
750 // 3. A program with arguments:
751 // "shell": {
752 // "with_arguments": {
753 // "program": "/bin/bash",
754 // "args": ["--login"]
755 // }
756 // }
757 "shell": "system",
758 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
759 "dock": "bottom",
760 // Default width when the terminal is docked to the left or right.
761 "default_width": 640,
762 // Default height when the terminal is docked to the bottom.
763 "default_height": 320,
764 // What working directory to use when launching the terminal.
765 // May take 4 values:
766 // 1. Use the current file's project directory. Will Fallback to the
767 // first project directory strategy if unsuccessful
768 // "working_directory": "current_project_directory"
769 // 2. Use the first project in this workspace's directory
770 // "working_directory": "first_project_directory"
771 // 3. Always use this platform's home directory (if we can find it)
772 // "working_directory": "always_home"
773 // 4. Always use a specific directory. This value will be shell expanded.
774 // If this path is not a valid directory the terminal will default to
775 // this platform's home directory (if we can find it)
776 // "working_directory": {
777 // "always": {
778 // "directory": "~/zed/projects/"
779 // }
780 // }
781 "working_directory": "current_project_directory",
782 // Set the cursor blinking behavior in the terminal.
783 // May take 3 values:
784 // 1. Never blink the cursor, ignoring the terminal mode
785 // "blinking": "off",
786 // 2. Default the cursor blink to off, but allow the terminal to
787 // set blinking
788 // "blinking": "terminal_controlled",
789 // 3. Always blink the cursor, ignoring the terminal mode
790 // "blinking": "on",
791 "blinking": "terminal_controlled",
792 // Default cursor shape for the terminal.
793 // 1. A block that surrounds the following character
794 // "block"
795 // 2. A vertical bar
796 // "bar"
797 // 3. An underline / underscore that runs along the following character
798 // "underline"
799 // 4. A box drawn around the following character
800 // "hollow"
801 //
802 // Default: not set, defaults to "block"
803 "cursor_shape": null,
804 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
805 // Alternate Scroll mode converts mouse scroll events into up / down key
806 // presses when in the alternate screen (e.g. when running applications
807 // like vim or less). The terminal can still set and unset this mode.
808 // May take 2 values:
809 // 1. Default alternate scroll mode to on
810 // "alternate_scroll": "on",
811 // 2. Default alternate scroll mode to off
812 // "alternate_scroll": "off",
813 "alternate_scroll": "off",
814 // Set whether the option key behaves as the meta key.
815 // May take 2 values:
816 // 1. Rely on default platform handling of option key, on macOS
817 // this means generating certain unicode characters
818 // "option_as_meta": false,
819 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
820 // "option_as_meta": true,
821 "option_as_meta": false,
822 // Whether or not selecting text in the terminal will automatically
823 // copy to the system clipboard.
824 "copy_on_select": false,
825 // Whether to show the terminal button in the status bar
826 "button": true,
827 // Any key-value pairs added to this list will be added to the terminal's
828 // environment. Use `:` to separate multiple values.
829 "env": {
830 // "KEY": "value1:value2"
831 },
832 // Set the terminal's line height.
833 // May take 3 values:
834 // 1. Use a line height that's comfortable for reading, 1.618
835 // "line_height": "comfortable"
836 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
837 // particularly if they use box characters
838 // "line_height": "standard",
839 // 3. Use a custom line height.
840 // "line_height": {
841 // "custom": 2
842 // },
843 "line_height": "comfortable",
844 // Activate the python virtual environment, if one is found, in the
845 // terminal's working directory (as resolved by the working_directory
846 // setting). Set this to "off" to disable this behavior.
847 "detect_venv": {
848 "on": {
849 // Default directories to search for virtual environments, relative
850 // to the current working directory. We recommend overriding this
851 // in your project's settings, rather than globally.
852 "directories": [".env", "env", ".venv", "venv"],
853 // Can also be `csh`, `fish`, `nushell` and `power_shell`
854 "activate_script": "default"
855 }
856 },
857 "toolbar": {
858 // Whether to display the terminal title in its toolbar's breadcrumbs.
859 // Only shown if the terminal title is not empty.
860 //
861 // The shell running in the terminal needs to be configured to emit the title.
862 // Example: `echo -e "\e]2;New Title\007";`
863 "breadcrumbs": true
864 }
865 // Set the terminal's font size. If this option is not included,
866 // the terminal will default to matching the buffer's font size.
867 // "font_size": 15,
868 // Set the terminal's font family. If this option is not included,
869 // the terminal will default to matching the buffer's font family.
870 // "font_family": "Zed Plex Mono",
871 // Set the terminal's font fallbacks. If this option is not included,
872 // the terminal will default to matching the buffer's font fallbacks.
873 // This will be merged with the platform's default font fallbacks
874 // "font_fallbacks": ["FiraCode Nerd Fonts"],
875 // Sets the maximum number of lines in the terminal's scrollback buffer.
876 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
877 // Existing terminals will not pick up this change until they are recreated.
878 // "max_scroll_history_lines": 10000,
879 },
880 "code_actions_on_format": {},
881 /// Settings related to running tasks.
882 "tasks": {
883 "variables": {}
884 },
885 // An object whose keys are language names, and whose values
886 // are arrays of filenames or extensions of files that should
887 // use those languages.
888 //
889 // For example, to treat files like `foo.notjs` as JavaScript,
890 // and `Embargo.lock` as TOML:
891 //
892 // {
893 // "JavaScript": ["notjs"],
894 // "TOML": ["Embargo.lock"]
895 // }
896 //
897 "file_types": {
898 "Plain Text": ["txt"],
899 "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "**/.vscode/**/*.json"],
900 "Shell Script": [".env.*"]
901 },
902 /// By default use a recent system version of node, or install our own.
903 /// You can override this to use a version of node that is not in $PATH with:
904 /// {
905 /// "node": {
906 /// "path": "/path/to/node"
907 /// "npm_path": "/path/to/npm" (defaults to node_path/../npm)
908 /// }
909 /// }
910 /// or to ensure Zed always downloads and installs an isolated version of node:
911 /// {
912 /// "node": {
913 /// "ignore_system_version": true,
914 /// }
915 /// NOTE: changing this setting currently requires restarting Zed.
916 "node": {},
917 // The extensions that Zed should automatically install on startup.
918 //
919 // If you don't want any of these extensions, add this field to your settings
920 // and change the value to `false`.
921 "auto_install_extensions": {
922 "html": true
923 },
924 // Different settings for specific languages.
925 "languages": {
926 "Astro": {
927 "language_servers": ["astro-language-server", "..."],
928 "prettier": {
929 "allowed": true,
930 "plugins": ["prettier-plugin-astro"]
931 }
932 },
933 "Blade": {
934 "prettier": {
935 "allowed": true
936 }
937 },
938 "C": {
939 "format_on_save": "off",
940 "use_on_type_format": false
941 },
942 "C++": {
943 "format_on_save": "off",
944 "use_on_type_format": false
945 },
946 "CSS": {
947 "prettier": {
948 "allowed": true
949 }
950 },
951 "Dart": {
952 "tab_size": 2
953 },
954 "Diff": {
955 "remove_trailing_whitespace_on_save": false,
956 "ensure_final_newline_on_save": false
957 },
958 "Elixir": {
959 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
960 },
961 "Erlang": {
962 "language_servers": ["erlang-ls", "!elp", "..."]
963 },
964 "Go": {
965 "code_actions_on_format": {
966 "source.organizeImports": true
967 }
968 },
969 "GraphQL": {
970 "prettier": {
971 "allowed": true
972 }
973 },
974 "HEEX": {
975 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
976 },
977 "HTML": {
978 "prettier": {
979 "allowed": true
980 }
981 },
982 "Java": {
983 "prettier": {
984 "allowed": true,
985 "plugins": ["prettier-plugin-java"]
986 }
987 },
988 "JavaScript": {
989 "language_servers": ["!typescript-language-server", "vtsls", "..."],
990 "prettier": {
991 "allowed": true
992 }
993 },
994 "JSON": {
995 "prettier": {
996 "allowed": true
997 }
998 },
999 "JSONC": {
1000 "prettier": {
1001 "allowed": true
1002 }
1003 },
1004 "Markdown": {
1005 "format_on_save": "off",
1006 "use_on_type_format": false,
1007 "prettier": {
1008 "allowed": true
1009 }
1010 },
1011 "PHP": {
1012 "language_servers": ["phpactor", "!intelephense", "..."],
1013 "prettier": {
1014 "allowed": true,
1015 "plugins": ["@prettier/plugin-php"],
1016 "parser": "php"
1017 }
1018 },
1019 "Ruby": {
1020 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
1021 },
1022 "SCSS": {
1023 "prettier": {
1024 "allowed": true
1025 }
1026 },
1027 "SQL": {
1028 "prettier": {
1029 "allowed": true,
1030 "plugins": ["prettier-plugin-sql"]
1031 }
1032 },
1033 "Starlark": {
1034 "language_servers": ["starpls", "!buck2-lsp", "..."]
1035 },
1036 "Svelte": {
1037 "language_servers": ["svelte-language-server", "..."],
1038 "prettier": {
1039 "allowed": true,
1040 "plugins": ["prettier-plugin-svelte"]
1041 }
1042 },
1043 "TSX": {
1044 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1045 "prettier": {
1046 "allowed": true
1047 }
1048 },
1049 "Twig": {
1050 "prettier": {
1051 "allowed": true
1052 }
1053 },
1054 "TypeScript": {
1055 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1056 "prettier": {
1057 "allowed": true
1058 }
1059 },
1060 "Vue.js": {
1061 "language_servers": ["vue-language-server", "..."],
1062 "prettier": {
1063 "allowed": true
1064 }
1065 },
1066 "XML": {
1067 "prettier": {
1068 "allowed": true,
1069 "plugins": ["@prettier/plugin-xml"]
1070 }
1071 },
1072 "YAML": {
1073 "prettier": {
1074 "allowed": true
1075 }
1076 }
1077 },
1078 // Different settings for specific language models.
1079 "language_models": {
1080 "anthropic": {
1081 "version": "1",
1082 "api_url": "https://api.anthropic.com"
1083 },
1084 "google": {
1085 "api_url": "https://generativelanguage.googleapis.com"
1086 },
1087 "ollama": {
1088 "api_url": "http://localhost:11434"
1089 },
1090 "openai": {
1091 "version": "1",
1092 "api_url": "https://api.openai.com/v1"
1093 }
1094 },
1095 // Zed's Prettier integration settings.
1096 // Allows to enable/disable formatting with Prettier
1097 // and configure default Prettier, used when no project-level Prettier installation is found.
1098 "prettier": {
1099 // // Whether to consider prettier formatter or not when attempting to format a file.
1100 // "allowed": false,
1101 //
1102 // // Use regular Prettier json configuration.
1103 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1104 // // the project has no other Prettier installed.
1105 // "plugins": [],
1106 //
1107 // // Use regular Prettier json configuration.
1108 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1109 // // the project has no other Prettier installed.
1110 // "trailingComma": "es5",
1111 // "tabWidth": 4,
1112 // "semi": false,
1113 // "singleQuote": true
1114 },
1115 // LSP Specific settings.
1116 "lsp": {
1117 // Specify the LSP name as a key here.
1118 // "rust-analyzer": {
1119 // // These initialization options are merged into Zed's defaults
1120 // "initialization_options": {
1121 // "check": {
1122 // "command": "clippy" // rust-analyzer.check.command (default: "check")
1123 // }
1124 // }
1125 // }
1126 },
1127 // Jupyter settings
1128 "jupyter": {
1129 "enabled": true
1130 // Specify the language name as the key and the kernel name as the value.
1131 // "kernel_selections": {
1132 // "python": "conda-base"
1133 // "typescript": "deno"
1134 // }
1135 },
1136 // Vim settings
1137 "vim": {
1138 "toggle_relative_line_numbers": false,
1139 "use_system_clipboard": "always",
1140 "use_multiline_find": false,
1141 "use_smartcase_find": false,
1142 "highlight_on_yank_duration": 200,
1143 "custom_digraphs": {}
1144 },
1145 // The server to connect to. If the environment variable
1146 // ZED_SERVER_URL is set, it will override this setting.
1147 "server_url": "https://zed.dev",
1148 // Settings overrides to use when using Zed Preview.
1149 // Mostly useful for developers who are managing multiple instances of Zed.
1150 "preview": {
1151 // "theme": "Andromeda"
1152 },
1153 // Settings overrides to use when using Zed Nightly.
1154 // Mostly useful for developers who are managing multiple instances of Zed.
1155 "nightly": {
1156 // "theme": "Andromeda"
1157 },
1158 // Settings overrides to use when using Zed Stable.
1159 // Mostly useful for developers who are managing multiple instances of Zed.
1160 "stable": {
1161 // "theme": "Andromeda"
1162 },
1163 // Settings overrides to use when using Zed Dev.
1164 // Mostly useful for developers who are managing multiple instances of Zed.
1165 "dev": {
1166 // "theme": "Andromeda"
1167 },
1168 // Task-related settings.
1169 "task": {
1170 // Whether to show task status indicator in the status bar. Default: true
1171 "show_status_indicator": true
1172 },
1173 // Whether to show full labels in line indicator or short ones
1174 //
1175 // Values:
1176 // - `short`: "2 s, 15 l, 32 c"
1177 // - `long`: "2 selections, 15 lines, 32 characters"
1178 // Default: long
1179 "line_indicator_format": "long",
1180 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1181 //
1182 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1183 // `socks5h`. `http` will be used when no scheme is specified.
1184 //
1185 // By default no proxy will be used, or Zed will try get proxy settings from
1186 // environment variables.
1187 //
1188 // Examples:
1189 // - "proxy": "socks5h://localhost:10808"
1190 // - "proxy": "http://127.0.0.1:10809"
1191 "proxy": null,
1192 // Set to configure aliases for the command palette.
1193 // When typing a query which is a key of this object, the value will be used instead.
1194 //
1195 // Examples:
1196 // {
1197 // "W": "workspace::Save"
1198 // }
1199 "command_aliases": {},
1200 // Whether to show user picture in titlebar.
1201 "show_user_picture": true,
1202 // ssh_connections is an array of ssh connections.
1203 // You can configure these from `project: Open Remote` in the command palette.
1204 // Zed's ssh support will pull configuration from your ~/.ssh too.
1205 // Examples:
1206 // [
1207 // {
1208 // "host": "example-box",
1209 // // "port": 22, "username": "test", "args": ["-i", "/home/user/.ssh/id_rsa"]
1210 // "projects": [
1211 // {
1212 // "paths": ["/home/user/code/zed"]
1213 // }
1214 // ]
1215 // }
1216 // ]
1217 "ssh_connections": [],
1218 // Configures context servers for use in the Assistant.
1219 "context_servers": {}
1220}