1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 // The name of a base set of key bindings to use.
14 // This setting can take four values, each named after another
15 // text editor:
16 //
17 // 1. "VSCode"
18 // 2. "JetBrains"
19 // 3. "SublimeText"
20 // 4. "Atom"
21 "base_keymap": "VSCode",
22 // Features that can be globally enabled or disabled
23 "features": {
24 // Which inline completion provider to use.
25 "inline_completion_provider": "copilot"
26 },
27 // The name of a font to use for rendering text in the editor
28 "buffer_font_family": "Zed Plex Mono",
29 // Set the buffer text's font fallbacks, this will be merged with
30 // the platform's default fallbacks.
31 "buffer_font_fallbacks": [],
32 // The OpenType features to enable for text in the editor.
33 "buffer_font_features": {
34 // Disable ligatures:
35 // "calt": false
36 },
37 // The default font size for text in the editor
38 "buffer_font_size": 15,
39 // The weight of the editor font in standard CSS units from 100 to 900.
40 "buffer_font_weight": 400,
41 // Set the buffer's line height.
42 // May take 3 values:
43 // 1. Use a line height that's comfortable for reading (1.618)
44 // "buffer_line_height": "comfortable"
45 // 2. Use a standard line height, (1.3)
46 // "buffer_line_height": "standard",
47 // 3. Use a custom line height
48 // "buffer_line_height": {
49 // "custom": 2
50 // },
51 "buffer_line_height": "comfortable",
52 // The name of a font to use for rendering text in the UI
53 // You can set this to ".SystemUIFont" to use the system font
54 "ui_font_family": "Zed Plex Sans",
55 // Set the UI's font fallbacks, this will be merged with the platform's
56 // default font fallbacks.
57 "ui_font_fallbacks": [],
58 // The OpenType features to enable for text in the UI
59 "ui_font_features": {
60 // Disable ligatures:
61 "calt": false
62 },
63 // The weight of the UI font in standard CSS units from 100 to 900.
64 "ui_font_weight": 400,
65 // The default font size for text in the UI
66 "ui_font_size": 16,
67 // The factor to grow the active pane by. Defaults to 1.0
68 // which gives the same size as all other panes.
69 "active_pane_magnification": 1.0,
70 // Centered layout related settings.
71 "centered_layout": {
72 // The relative width of the left padding of the central pane from the
73 // workspace when the centered layout is used.
74 "left_padding": 0.2,
75 // The relative width of the right padding of the central pane from the
76 // workspace when the centered layout is used.
77 "right_padding": 0.2
78 },
79 // The key to use for adding multiple cursors
80 // Currently "alt" or "cmd_or_ctrl" (also aliased as
81 // "cmd" and "ctrl") are supported.
82 "multi_cursor_modifier": "alt",
83 // Whether to enable vim modes and key bindings.
84 "vim_mode": false,
85 // Whether to show the informational hover box when moving the mouse
86 // over symbols in the editor.
87 "hover_popover_enabled": true,
88 // Whether to confirm before quitting Zed.
89 "confirm_quit": false,
90 // Whether to restore last closed project when fresh Zed instance is opened.
91 "restore_on_startup": "last_session",
92 // Size of the drop target in the editor.
93 "drop_target_size": 0.2,
94 // Whether the window should be closed when using 'close active item' on a window with no tabs.
95 // May take 3 values:
96 // 1. Use the current platform's convention
97 // "when_closing_with_no_tabs": "platform_default"
98 // 2. Always close the window:
99 // "when_closing_with_no_tabs": "close_window",
100 // 3. Never close the window
101 // "when_closing_with_no_tabs": "keep_window_open",
102 "when_closing_with_no_tabs": "platform_default",
103 // Whether to use the system provided dialogs for Open and Save As.
104 // When set to false, Zed will use the built-in keyboard-first pickers.
105 "use_system_path_prompts": true,
106 // Whether the cursor blinks in the editor.
107 "cursor_blink": true,
108 // How to highlight the current line in the editor.
109 //
110 // 1. Don't highlight the current line:
111 // "none"
112 // 2. Highlight the gutter area:
113 // "gutter"
114 // 3. Highlight the editor area:
115 // "line"
116 // 4. Highlight the full line (default):
117 // "all"
118 "current_line_highlight": "all",
119 // Whether to pop the completions menu while typing in an editor without
120 // explicitly requesting it.
121 "show_completions_on_input": true,
122 // Whether to display inline and alongside documentation for items in the
123 // completions menu
124 "show_completion_documentation": true,
125 // The debounce delay before re-querying the language server for completion
126 // documentation when not included in original completion list.
127 "completion_documentation_secondary_query_debounce": 300,
128 // Show method signatures in the editor, when inside parentheses.
129 "auto_signature_help": false,
130 /// Whether to show the signature help after completion or a bracket pair inserted.
131 /// If `auto_signature_help` is enabled, this setting will be treated as enabled also.
132 "show_signature_help_after_edits": true,
133 // Whether to show wrap guides (vertical rulers) in the editor.
134 // Setting this to true will show a guide at the 'preferred_line_length' value
135 // if softwrap is set to 'preferred_line_length', and will show any
136 // additional guides as specified by the 'wrap_guides' setting.
137 "show_wrap_guides": true,
138 // Character counts at which to show wrap guides in the editor.
139 "wrap_guides": [],
140 // Hide the values of in variables from visual display in private files
141 "redact_private_values": false,
142 // The default number of lines to expand excerpts in the multibuffer by.
143 "expand_excerpt_lines": 3,
144 // Globs to match against file paths to determine if a file is private.
145 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
146 // Whether to use additional LSP queries to format (and amend) the code after
147 // every "trigger" symbol input, defined by LSP server capabilities.
148 "use_on_type_format": true,
149 // Whether to automatically add matching closing characters when typing
150 // opening parenthesis, bracket, brace, single or double quote characters.
151 // For example, when you type (, Zed will add a closing ) at the correct position.
152 "use_autoclose": true,
153 // Whether to automatically surround selected text when typing opening parenthesis,
154 // bracket, brace, single or double quote characters.
155 // For example, when you select text and type (, Zed will surround the text with ().
156 "use_auto_surround": true,
157 // Controls how the editor handles the autoclosed characters.
158 // When set to `false`(default), skipping over and auto-removing of the closing characters
159 // happen only for auto-inserted characters.
160 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
161 // no matter how they were inserted.
162 "always_treat_brackets_as_autoclosed": false,
163 // Controls whether inline completions are shown immediately (true)
164 // or manually by triggering `editor::ShowInlineCompletion` (false).
165 "show_inline_completions": true,
166 // Whether to show tabs and spaces in the editor.
167 // This setting can take three values:
168 //
169 // 1. Draw tabs and spaces only for the selected text (default):
170 // "selection"
171 // 2. Do not draw any tabs or spaces:
172 // "none"
173 // 3. Draw all invisible symbols:
174 // "all"
175 // 4. Draw whitespaces at boundaries only:
176 // "boundary"
177 // For a whitespace to be on a boundary, any of the following conditions need to be met:
178 // - It is a tab
179 // - It is adjacent to an edge (start or end)
180 // - It is adjacent to a whitespace (left or right)
181 "show_whitespaces": "selection",
182 // Settings related to calls in Zed
183 "calls": {
184 // Join calls with the microphone live by default
185 "mute_on_join": false,
186 // Share your project when you are the first to join a channel
187 "share_on_join": false
188 },
189 // Toolbar related settings
190 "toolbar": {
191 // Whether to show breadcrumbs.
192 "breadcrumbs": true,
193 // Whether to show quick action buttons.
194 "quick_actions": true,
195 // Whether to show the Selections menu in the editor toolbar
196 "selections_menu": true
197 },
198 // Scrollbar related settings
199 "scrollbar": {
200 // When to show the scrollbar in the editor.
201 // This setting can take four values:
202 //
203 // 1. Show the scrollbar if there's important information or
204 // follow the system's configured behavior (default):
205 // "auto"
206 // 2. Match the system's configured behavior:
207 // "system"
208 // 3. Always show the scrollbar:
209 // "always"
210 // 4. Never show the scrollbar:
211 // "never"
212 "show": "auto",
213 // Whether to show cursor positions in the scrollbar.
214 "cursors": true,
215 // Whether to show git diff indicators in the scrollbar.
216 "git_diff": true,
217 // Whether to show buffer search results in the scrollbar.
218 "search_results": true,
219 // Whether to show selected symbol occurrences in the scrollbar.
220 "selected_symbol": true,
221 // Whether to show diagnostic indicators in the scrollbar.
222 "diagnostics": true
223 },
224 // What to do when multibuffer is double clicked in some of its excerpts
225 // (parts of singleton buffers).
226 // May take 2 values:
227 // 1. Behave as a regular buffer and select the whole word (default).
228 // "double_click_in_multibuffer": "select"
229 // 2. Open the excerpt clicked as a new buffer in the new tab.
230 // "double_click_in_multibuffer": "open",
231 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
232 "double_click_in_multibuffer": "select",
233 "gutter": {
234 // Whether to show line numbers in the gutter.
235 "line_numbers": true,
236 // Whether to show code action buttons in the gutter.
237 "code_actions": true,
238 // Whether to show runnables buttons in the gutter.
239 "runnables": true,
240 // Whether to show fold buttons in the gutter.
241 "folds": true
242 },
243 "indent_guides": {
244 /// Whether to show indent guides in the editor.
245 "enabled": true,
246 /// The width of the indent guides in pixels, between 1 and 10.
247 "line_width": 1,
248 /// The width of the active indent guide in pixels, between 1 and 10.
249 "active_line_width": 1,
250 /// Determines how indent guides are colored.
251 /// This setting can take the following three values:
252 ///
253 /// 1. "disabled"
254 /// 2. "fixed"
255 /// 3. "indent_aware"
256 "coloring": "fixed",
257 /// Determines how indent guide backgrounds are colored.
258 /// This setting can take the following two values:
259 ///
260 /// 1. "disabled"
261 /// 2. "indent_aware"
262 "background_coloring": "disabled"
263 },
264 // Whether the editor will scroll beyond the last line.
265 "scroll_beyond_last_line": "one_page",
266 // The number of lines to keep above/below the cursor when scrolling.
267 "vertical_scroll_margin": 3,
268 // Scroll sensitivity multiplier. This multiplier is applied
269 // to both the horizontal and vertical delta values while scrolling.
270 "scroll_sensitivity": 1.0,
271 "relative_line_numbers": false,
272 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
273 "search_wrap": true,
274 // When to populate a new search's query based on the text under the cursor.
275 // This setting can take the following three values:
276 //
277 // 1. Always populate the search query with the word under the cursor (default).
278 // "always"
279 // 2. Only populate the search query when there is text selected
280 // "selection"
281 // 3. Never populate the search query
282 // "never"
283 "seed_search_query_from_cursor": "always",
284 // Inlay hint related settings
285 "inlay_hints": {
286 // Global switch to toggle hints on and off, switched off by default.
287 "enabled": false,
288 // Toggle certain types of hints on and off, all switched on by default.
289 "show_type_hints": true,
290 "show_parameter_hints": true,
291 // Corresponds to null/None LSP hint type value.
292 "show_other_hints": true,
293 // Time to wait after editing the buffer, before requesting the hints,
294 // set to 0 to disable debouncing.
295 "edit_debounce_ms": 700,
296 // Time to wait after scrolling the buffer, before requesting the hints,
297 // set to 0 to disable debouncing.
298 "scroll_debounce_ms": 50
299 },
300 "project_panel": {
301 // Whether to show the project panel button in the status bar
302 "button": true,
303 // Default width of the project panel.
304 "default_width": 240,
305 // Where to dock the project panel. Can be 'left' or 'right'.
306 "dock": "left",
307 // Whether to show file icons in the project panel.
308 "file_icons": true,
309 // Whether to show folder icons or chevrons for directories in the project panel.
310 "folder_icons": true,
311 // Whether to show the git status in the project panel.
312 "git_status": true,
313 // Amount of indentation for nested items.
314 "indent_size": 20,
315 // Whether to reveal it in the project panel automatically,
316 // when a corresponding project entry becomes active.
317 // Gitignored entries are never auto revealed.
318 "auto_reveal_entries": true,
319 // Whether to fold directories automatically and show compact folders
320 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
321 "auto_fold_dirs": true,
322 /// Scrollbar-related settings
323 "scrollbar": {
324 /// When to show the scrollbar in the project panel.
325 ///
326 /// Default: always
327 "show": "always"
328 }
329 },
330 "outline_panel": {
331 // Whether to show the outline panel button in the status bar
332 "button": true,
333 // Default width of the outline panel.
334 "default_width": 300,
335 // Where to dock the outline panel. Can be 'left' or 'right'.
336 "dock": "left",
337 // Whether to show file icons in the outline panel.
338 "file_icons": true,
339 // Whether to show folder icons or chevrons for directories in the outline panel.
340 "folder_icons": true,
341 // Whether to show the git status in the outline panel.
342 "git_status": true,
343 // Amount of indentation for nested items.
344 "indent_size": 20,
345 // Whether to reveal it in the outline panel automatically,
346 // when a corresponding outline entry becomes active.
347 // Gitignored entries are never auto revealed.
348 "auto_reveal_entries": true,
349 /// Whether to fold directories automatically
350 /// when a directory has only one directory inside.
351 "auto_fold_dirs": true
352 },
353 "collaboration_panel": {
354 // Whether to show the collaboration panel button in the status bar.
355 "button": true,
356 // Where to dock the collaboration panel. Can be 'left' or 'right'.
357 "dock": "left",
358 // Default width of the collaboration panel.
359 "default_width": 240
360 },
361 "chat_panel": {
362 // Whether to show the chat panel button in the status bar.
363 "button": true,
364 // Where to the chat panel. Can be 'left' or 'right'.
365 "dock": "right",
366 // Default width of the chat panel.
367 "default_width": 240
368 },
369 "message_editor": {
370 // Whether to automatically replace emoji shortcodes with emoji characters.
371 // For example: typing `:wave:` gets replaced with `👋`.
372 "auto_replace_emoji_shortcode": true
373 },
374 "notification_panel": {
375 // Whether to show the notification panel button in the status bar.
376 "button": true,
377 // Where to dock the notification panel. Can be 'left' or 'right'.
378 "dock": "right",
379 // Default width of the notification panel.
380 "default_width": 380
381 },
382 "assistant": {
383 // Version of this setting.
384 "version": "2",
385 // Whether the assistant is enabled.
386 "enabled": true,
387 // Whether to show the assistant panel button in the status bar.
388 "button": true,
389 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
390 "dock": "right",
391 // Default width when the assistant is docked to the left or right.
392 "default_width": 640,
393 // Default height when the assistant is docked to the bottom.
394 "default_height": 320,
395 // The default model to use when creating new contexts.
396 "default_model": {
397 // The provider to use.
398 "provider": "openai",
399 // The model to use.
400 "model": "gpt-4o"
401 }
402 },
403 // Whether the screen sharing icon is shown in the os status bar.
404 "show_call_status_icon": true,
405 // Whether to use language servers to provide code intelligence.
406 "enable_language_server": true,
407 // Whether to perform linked edits of associated ranges, if the language server supports it.
408 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
409 "linked_edits": true,
410 // The list of language servers to use (or disable) for all languages.
411 //
412 // This is typically customized on a per-language basis.
413 "language_servers": ["..."],
414 // When to automatically save edited buffers. This setting can
415 // take four values.
416 //
417 // 1. Never automatically save:
418 // "autosave": "off",
419 // 2. Save when changing focus away from the Zed window:
420 // "autosave": "on_window_change",
421 // 3. Save when changing focus away from a specific buffer:
422 // "autosave": "on_focus_change",
423 // 4. Save when idle for a certain amount of time:
424 // "autosave": { "after_delay": {"milliseconds": 500} },
425 "autosave": "off",
426 // Settings related to the editor's tab bar.
427 "tab_bar": {
428 // Whether or not to show the tab bar in the editor
429 "show": true,
430 // Whether or not to show the navigation history buttons.
431 "show_nav_history_buttons": true
432 },
433 // Settings related to the editor's tabs
434 "tabs": {
435 // Show git status colors in the editor tabs.
436 "git_status": false,
437 // Position of the close button on the editor tabs.
438 "close_position": "right",
439 // Whether to show the file icon for a tab.
440 "file_icons": false
441 },
442 // Settings related to preview tabs.
443 "preview_tabs": {
444 // Whether preview tabs should be enabled.
445 // Preview tabs allow you to open files in preview mode, where they close automatically
446 // when you switch to another file unless you explicitly pin them.
447 // This is useful for quickly viewing files without cluttering your workspace.
448 "enabled": true,
449 // Whether to open tabs in preview mode when selected from the file finder.
450 "enable_preview_from_file_finder": false,
451 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
452 "enable_preview_from_code_navigation": false
453 },
454 // Whether or not to remove any trailing whitespace from lines of a buffer
455 // before saving it.
456 "remove_trailing_whitespace_on_save": true,
457 // Whether to start a new line with a comment when a previous line is a comment as well.
458 "extend_comment_on_newline": true,
459 // Whether or not to ensure there's a single newline at the end of a buffer
460 // when saving it.
461 "ensure_final_newline_on_save": true,
462 // Whether or not to perform a buffer format before saving
463 //
464 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
465 "format_on_save": "on",
466 // How to perform a buffer format. This setting can take 4 values:
467 //
468 // 1. Format code using the current language server:
469 // "formatter": "language_server"
470 // 2. Format code using an external command:
471 // "formatter": {
472 // "external": {
473 // "command": "prettier",
474 // "arguments": ["--stdin-filepath", "{buffer_path}"]
475 // }
476 // }
477 // 3. Format code using Zed's Prettier integration:
478 // "formatter": "prettier"
479 // 4. Default. Format files using Zed's Prettier integration (if applicable),
480 // or falling back to formatting via language server:
481 // "formatter": "auto"
482 "formatter": "auto",
483 // How to soft-wrap long lines of text.
484 // Possible values:
485 //
486 // 1. Do not soft wrap.
487 // "soft_wrap": "none",
488 // 2. Prefer a single line generally, unless an overly long line is encountered.
489 // "soft_wrap": "prefer_line",
490 // 3. Soft wrap lines that overflow the editor.
491 // "soft_wrap": "editor_width",
492 // 4. Soft wrap lines at the preferred line length.
493 // "soft_wrap": "preferred_line_length",
494 "soft_wrap": "prefer_line",
495 // The column at which to soft-wrap lines, for buffers where soft-wrap
496 // is enabled.
497 "preferred_line_length": 80,
498 // Whether to indent lines using tab characters, as opposed to multiple
499 // spaces.
500 "hard_tabs": false,
501 // How many columns a tab should occupy.
502 "tab_size": 4,
503 // Control what info is collected by Zed.
504 "telemetry": {
505 // Send debug info like crash reports.
506 "diagnostics": true,
507 // Send anonymized usage data like what languages you're using Zed with.
508 "metrics": true
509 },
510 // Automatically update Zed. This setting may be ignored on Linux if
511 // installed through a package manager.
512 "auto_update": true,
513 // Diagnostics configuration.
514 "diagnostics": {
515 // Whether to show warnings or not by default.
516 "include_warnings": true
517 },
518 // Add files or globs of files that will be excluded by Zed entirely:
519 // they will be skipped during FS scan(s), file tree and file search
520 // will lack the corresponding file entries.
521 "file_scan_exclusions": [
522 "**/.git",
523 "**/.svn",
524 "**/.hg",
525 "**/CVS",
526 "**/.DS_Store",
527 "**/Thumbs.db",
528 "**/.classpath",
529 "**/.settings"
530 ],
531 // Git gutter behavior configuration.
532 "git": {
533 // Control whether the git gutter is shown. May take 2 values:
534 // 1. Show the gutter
535 // "git_gutter": "tracked_files"
536 // 2. Hide the gutter
537 // "git_gutter": "hide"
538 "git_gutter": "tracked_files",
539 // Control whether the git blame information is shown inline,
540 // in the currently focused line.
541 "inline_blame": {
542 "enabled": true
543 // Sets a delay after which the inline blame information is shown.
544 // Delay is restarted with every cursor movement.
545 // "delay_ms": 600
546 }
547 },
548 // Configuration for how direnv configuration should be loaded. May take 2 values:
549 // 1. Load direnv configuration through the shell hook, works for POSIX shells and fish.
550 // "load_direnv": "shell_hook"
551 // 2. Load direnv configuration using `direnv export json` directly.
552 // This can help with some shells that otherwise would not detect
553 // the direnv environment, such as nushell or elvish.
554 // "load_direnv": "direct"
555 "load_direnv": "shell_hook",
556 "inline_completions": {
557 // A list of globs representing files that inline completions should be disabled for.
558 "disabled_globs": [".env"]
559 },
560 // Settings specific to journaling
561 "journal": {
562 // The path of the directory where journal entries are stored
563 "path": "~",
564 // What format to display the hours in
565 // May take 2 values:
566 // 1. hour12
567 // 2. hour24
568 "hour_format": "hour12"
569 },
570 // Settings specific to the terminal
571 "terminal": {
572 // What shell to use when opening a terminal. May take 3 values:
573 // 1. Use the system's default terminal configuration in /etc/passwd
574 // "shell": "system"
575 // 2. A program:
576 // "shell": {
577 // "program": "sh"
578 // }
579 // 3. A program with arguments:
580 // "shell": {
581 // "with_arguments": {
582 // "program": "/bin/bash",
583 // "arguments": ["--login"]
584 // }
585 // }
586 "shell": "system",
587 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
588 "dock": "bottom",
589 // Default width when the terminal is docked to the left or right.
590 "default_width": 640,
591 // Default height when the terminal is docked to the bottom.
592 "default_height": 320,
593 // What working directory to use when launching the terminal.
594 // May take 4 values:
595 // 1. Use the current file's project directory. Will Fallback to the
596 // first project directory strategy if unsuccessful
597 // "working_directory": "current_project_directory"
598 // 2. Use the first project in this workspace's directory
599 // "working_directory": "first_project_directory"
600 // 3. Always use this platform's home directory (if we can find it)
601 // "working_directory": "always_home"
602 // 4. Always use a specific directory. This value will be shell expanded.
603 // If this path is not a valid directory the terminal will default to
604 // this platform's home directory (if we can find it)
605 // "working_directory": {
606 // "always": {
607 // "directory": "~/zed/projects/"
608 // }
609 // }
610 "working_directory": "current_project_directory",
611 // Set the cursor blinking behavior in the terminal.
612 // May take 3 values:
613 // 1. Never blink the cursor, ignoring the terminal mode
614 // "blinking": "off",
615 // 2. Default the cursor blink to off, but allow the terminal to
616 // set blinking
617 // "blinking": "terminal_controlled",
618 // 3. Always blink the cursor, ignoring the terminal mode
619 // "blinking": "on",
620 "blinking": "terminal_controlled",
621 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
622 // Alternate Scroll mode converts mouse scroll events into up / down key
623 // presses when in the alternate screen (e.g. when running applications
624 // like vim or less). The terminal can still set and unset this mode.
625 // May take 2 values:
626 // 1. Default alternate scroll mode to on
627 // "alternate_scroll": "on",
628 // 2. Default alternate scroll mode to off
629 // "alternate_scroll": "off",
630 "alternate_scroll": "off",
631 // Set whether the option key behaves as the meta key.
632 // May take 2 values:
633 // 1. Rely on default platform handling of option key, on macOS
634 // this means generating certain unicode characters
635 // "option_to_meta": false,
636 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
637 // "option_to_meta": true,
638 "option_as_meta": true,
639 // Whether or not selecting text in the terminal will automatically
640 // copy to the system clipboard.
641 "copy_on_select": false,
642 // Whether to show the terminal button in the status bar
643 "button": true,
644 // Any key-value pairs added to this list will be added to the terminal's
645 // environment. Use `:` to separate multiple values.
646 "env": {
647 // "KEY": "value1:value2"
648 },
649 // Set the terminal's line height.
650 // May take 3 values:
651 // 1. Use a line height that's comfortable for reading, 1.618
652 // "line_height": "comfortable"
653 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
654 // particularly if they use box characters
655 // "line_height": "standard",
656 // 3. Use a custom line height.
657 // "line_height": {
658 // "custom": 2
659 // },
660 "line_height": "comfortable",
661 // Activate the python virtual environment, if one is found, in the
662 // terminal's working directory (as resolved by the working_directory
663 // setting). Set this to "off" to disable this behavior.
664 "detect_venv": {
665 "on": {
666 // Default directories to search for virtual environments, relative
667 // to the current working directory. We recommend overriding this
668 // in your project's settings, rather than globally.
669 "directories": [".env", "env", ".venv", "venv"],
670 // Can also be `csh`, `fish`, and `nushell`
671 "activate_script": "default"
672 }
673 },
674 "toolbar": {
675 // Whether to display the terminal title in its toolbar.
676 "title": true
677 }
678 // Set the terminal's font size. If this option is not included,
679 // the terminal will default to matching the buffer's font size.
680 // "font_size": 15,
681 // Set the terminal's font family. If this option is not included,
682 // the terminal will default to matching the buffer's font family.
683 // "font_family": "Zed Plex Mono",
684 // Set the terminal's font fallbacks. If this option is not included,
685 // the terminal will default to matching the buffer's font fallbacks.
686 // This will be merged with the platform's default font fallbacks
687 // "font_fallbacks": ["FiraCode Nerd Fonts"],
688 // Sets the maximum number of lines in the terminal's scrollback buffer.
689 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
690 // Existing terminals will not pick up this change until they are recreated.
691 // "max_scroll_history_lines": 10000,
692 },
693 "code_actions_on_format": {},
694 /// Settings related to running tasks.
695 "tasks": {
696 "variables": {}
697 },
698 // An object whose keys are language names, and whose values
699 // are arrays of filenames or extensions of files that should
700 // use those languages.
701 //
702 // For example, to treat files like `foo.notjs` as JavaScript,
703 // and `Embargo.lock` as TOML:
704 //
705 // {
706 // "JavaScript": ["notjs"],
707 // "TOML": ["Embargo.lock"]
708 // }
709 //
710 "file_types": {
711 "JSON": ["flake.lock"],
712 "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "tsconfig.json"]
713 },
714 // The extensions that Zed should automatically install on startup.
715 //
716 // If you don't want any of these extensions, add this field to your settings
717 // and change the value to `false`.
718 "auto_install_extensions": {
719 "html": true
720 },
721 // Different settings for specific languages.
722 "languages": {
723 "Astro": {
724 "prettier": {
725 "allowed": true,
726 "plugins": ["prettier-plugin-astro"]
727 }
728 },
729 "Blade": {
730 "prettier": {
731 "allowed": true
732 }
733 },
734 "C": {
735 "format_on_save": "off",
736 "use_on_type_format": false
737 },
738 "C++": {
739 "format_on_save": "off",
740 "use_on_type_format": false
741 },
742 "CSS": {
743 "prettier": {
744 "allowed": true
745 }
746 },
747 "Elixir": {
748 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
749 },
750 "Erlang": {
751 "language_servers": ["erlang-ls", "!elp", "..."]
752 },
753 "Go": {
754 "code_actions_on_format": {
755 "source.organizeImports": true
756 }
757 },
758 "GraphQL": {
759 "prettier": {
760 "allowed": true
761 }
762 },
763 "HEEX": {
764 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
765 },
766 "HTML": {
767 "prettier": {
768 "allowed": true
769 }
770 },
771 "Java": {
772 "prettier": {
773 "allowed": true,
774 "plugins": ["prettier-plugin-java"]
775 }
776 },
777 "JavaScript": {
778 "language_servers": ["!typescript-language-server", "vtsls", "..."],
779 "prettier": {
780 "allowed": true
781 }
782 },
783 "JSON": {
784 "prettier": {
785 "allowed": true
786 }
787 },
788 "JSONC": {
789 "prettier": {
790 "allowed": true
791 }
792 },
793 "Markdown": {
794 "format_on_save": "off",
795 "use_on_type_format": false,
796 "prettier": {
797 "allowed": true
798 }
799 },
800 "PHP": {
801 "language_servers": ["phpactor", "!intelephense", "..."],
802 "prettier": {
803 "allowed": true,
804 "plugins": ["@prettier/plugin-php"],
805 "parser": "php"
806 }
807 },
808 "Ruby": {
809 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
810 },
811 "SCSS": {
812 "prettier": {
813 "allowed": true
814 }
815 },
816 "SQL": {
817 "prettier": {
818 "allowed": true,
819 "plugins": ["prettier-plugin-sql"]
820 }
821 },
822 "Starlark": {
823 "language_servers": ["starpls", "!buck2-lsp", "..."]
824 },
825 "Svelte": {
826 "prettier": {
827 "allowed": true,
828 "plugins": ["prettier-plugin-svelte"]
829 }
830 },
831 "TSX": {
832 "language_servers": ["!typescript-language-server", "vtsls", "..."],
833 "prettier": {
834 "allowed": true
835 }
836 },
837 "Twig": {
838 "prettier": {
839 "allowed": true
840 }
841 },
842 "TypeScript": {
843 "language_servers": ["!typescript-language-server", "vtsls", "..."],
844 "prettier": {
845 "allowed": true
846 }
847 },
848 "Vue.js": {
849 "prettier": {
850 "allowed": true
851 }
852 },
853 "XML": {
854 "prettier": {
855 "allowed": true,
856 "plugins": ["@prettier/plugin-xml"]
857 }
858 },
859 "YAML": {
860 "prettier": {
861 "allowed": true
862 }
863 }
864 },
865 // Different settings for specific language models.
866 "language_models": {
867 "anthropic": {
868 "version": "1",
869 "api_url": "https://api.anthropic.com"
870 },
871 "google": {
872 "api_url": "https://generativelanguage.googleapis.com"
873 },
874 "ollama": {
875 "api_url": "http://localhost:11434"
876 },
877 "openai": {
878 "version": "1",
879 "api_url": "https://api.openai.com/v1"
880 }
881 },
882 // Zed's Prettier integration settings.
883 // Allows to enable/disable formatting with Prettier
884 // and configure default Prettier, used when no project-level Prettier installation is found.
885 "prettier": {
886 // // Whether to consider prettier formatter or not when attempting to format a file.
887 // "allowed": false,
888 //
889 // // Use regular Prettier json configuration.
890 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
891 // // the project has no other Prettier installed.
892 // "plugins": [],
893 //
894 // // Use regular Prettier json configuration.
895 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
896 // // the project has no other Prettier installed.
897 // "trailingComma": "es5",
898 // "tabWidth": 4,
899 // "semi": false,
900 // "singleQuote": true
901 },
902 // LSP Specific settings.
903 "lsp": {
904 // Specify the LSP name as a key here.
905 // "rust-analyzer": {
906 // // These initialization options are merged into Zed's defaults
907 // "initialization_options": {
908 // "check": {
909 // "command": "clippy" // rust-analyzer.check.command (default: "check")
910 // }
911 // }
912 // }
913 },
914 // Jupyter settings
915 "jupyter": {
916 "enabled": true
917 // Specify the language name as the key and the kernel name as the value.
918 // "kernel_selections": {
919 // "python": "conda-base"
920 // "typescript": "deno"
921 // }
922 },
923 // Vim settings
924 "vim": {
925 "use_system_clipboard": "always",
926 "use_multiline_find": false,
927 "use_smartcase_find": false,
928 "custom_digraphs": {}
929 },
930 // The server to connect to. If the environment variable
931 // ZED_SERVER_URL is set, it will override this setting.
932 "server_url": "https://zed.dev",
933 // Settings overrides to use when using Zed Preview.
934 // Mostly useful for developers who are managing multiple instances of Zed.
935 "preview": {
936 // "theme": "Andromeda"
937 },
938 // Settings overrides to use when using Zed Nightly.
939 // Mostly useful for developers who are managing multiple instances of Zed.
940 "nightly": {
941 // "theme": "Andromeda"
942 },
943 // Settings overrides to use when using Zed Stable.
944 // Mostly useful for developers who are managing multiple instances of Zed.
945 "stable": {
946 // "theme": "Andromeda"
947 },
948 // Settings overrides to use when using Zed Dev.
949 // Mostly useful for developers who are managing multiple instances of Zed.
950 "dev": {
951 // "theme": "Andromeda"
952 },
953 // Task-related settings.
954 "task": {
955 // Whether to show task status indicator in the status bar. Default: true
956 "show_status_indicator": true
957 },
958 // Whether to show full labels in line indicator or short ones
959 //
960 // Values:
961 // - `short`: "2 s, 15 l, 32 c"
962 // - `long`: "2 selections, 15 lines, 32 characters"
963 // Default: long
964 "line_indicator_format": "long",
965 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
966 //
967 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
968 // `socks5h`. `http` will be used when no scheme is specified.
969 //
970 // By default no proxy will be used, or Zed will try get proxy settings from
971 // environment variables.
972 //
973 // Examples:
974 // - "proxy": "socks5://localhost:10808"
975 // - "proxy": "http://127.0.0.1:10809"
976 "proxy": null,
977 // Set to configure aliases for the command palette.
978 // When typing a query which is a key of this object, the value will be used instead.
979 //
980 // Examples:
981 // {
982 // "W": "workspace::Save"
983 // }
984 "command_aliases": {},
985 // ssh_connections is an array of ssh connections.
986 // By default this setting is null, which disables the direct ssh connection support.
987 // You can configure these from `project: Open Remote` in the command palette.
988 // Zed's ssh support will pull configuration from your ~/.ssh too.
989 // Examples:
990 // [
991 // {
992 // "host": "example-box",
993 // "projects": [
994 // {
995 // "paths": ["/home/user/code/zed"]
996 // }
997 // ]
998 // }
999 // ]
1000 "ssh_connections": null
1001}