1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 "icon_theme": "Zed (Default)",
14 // The name of a base set of key bindings to use.
15 // This setting can take six values, each named after another
16 // text editor:
17 //
18 // 1. "VSCode"
19 // 2. "Atom"
20 // 3. "JetBrains"
21 // 4. "None"
22 // 5. "SublimeText"
23 // 6. "TextMate"
24 "base_keymap": "VSCode",
25 // Features that can be globally enabled or disabled
26 "features": {
27 // Which edit prediction provider to use.
28 "edit_prediction_provider": "zed"
29 },
30 // The name of a font to use for rendering text in the editor
31 "buffer_font_family": "Zed Plex Mono",
32 // Set the buffer text's font fallbacks, this will be merged with
33 // the platform's default fallbacks.
34 "buffer_font_fallbacks": null,
35 // The OpenType features to enable for text in the editor.
36 "buffer_font_features": {
37 // Disable ligatures:
38 // "calt": false
39 },
40 // The default font size for text in the editor
41 "buffer_font_size": 15,
42 // The weight of the editor font in standard CSS units from 100 to 900.
43 "buffer_font_weight": 400,
44 // Set the buffer's line height.
45 // May take 3 values:
46 // 1. Use a line height that's comfortable for reading (1.618)
47 // "buffer_line_height": "comfortable"
48 // 2. Use a standard line height, (1.3)
49 // "buffer_line_height": "standard",
50 // 3. Use a custom line height
51 // "buffer_line_height": {
52 // "custom": 2
53 // },
54 "buffer_line_height": "comfortable",
55 // The name of a font to use for rendering text in the UI
56 // You can set this to ".SystemUIFont" to use the system font
57 "ui_font_family": "Zed Plex Sans",
58 // Set the UI's font fallbacks, this will be merged with the platform's
59 // default font fallbacks.
60 "ui_font_fallbacks": null,
61 // The OpenType features to enable for text in the UI
62 "ui_font_features": {
63 // Disable ligatures:
64 "calt": false
65 },
66 // The weight of the UI font in standard CSS units from 100 to 900.
67 "ui_font_weight": 400,
68 // The default font size for text in the UI
69 "ui_font_size": 16,
70 // The default font size for text in the agent panel
71 "agent_font_size": 16,
72 // How much to fade out unused code.
73 "unnecessary_code_fade": 0.3,
74 // Active pane styling settings.
75 "active_pane_modifiers": {
76 // The factor to grow the active pane by. Defaults to 1.0
77 // which gives the same size as all other panes.
78 "magnification": 1.0,
79 // Inset border size of the active pane, in pixels.
80 "border_size": 0.0,
81 // Opacity of the inactive panes. 0 means transparent, 1 means opaque.
82 // Values are clamped to the [0.0, 1.0] range.
83 "inactive_opacity": 1.0
84 },
85 // Layout mode of the bottom dock. Defaults to "contained"
86 "bottom_dock_layout": "contained",
87 // The direction that you want to split panes horizontally. Defaults to "up"
88 "pane_split_direction_horizontal": "up",
89 // The direction that you want to split panes horizontally. Defaults to "left"
90 "pane_split_direction_vertical": "left",
91 // Centered layout related settings.
92 "centered_layout": {
93 // The relative width of the left padding of the central pane from the
94 // workspace when the centered layout is used.
95 "left_padding": 0.2,
96 // The relative width of the right padding of the central pane from the
97 // workspace when the centered layout is used.
98 "right_padding": 0.2
99 },
100 // All settings related to the image viewer.
101 "image_viewer": {
102 // The unit for image file sizes.
103 // By default we're setting it to binary.
104 // The second option is decimal.
105 "unit": "binary"
106 },
107 // The key to use for adding multiple cursors
108 // Currently "alt" or "cmd_or_ctrl" (also aliased as
109 // "cmd" and "ctrl") are supported.
110 "multi_cursor_modifier": "alt",
111 // Whether to enable vim modes and key bindings.
112 "vim_mode": false,
113 // Whether to show the informational hover box when moving the mouse
114 // over symbols in the editor.
115 "hover_popover_enabled": true,
116 // Time to wait before showing the informational hover box
117 "hover_popover_delay": 350,
118 // Whether to confirm before quitting Zed.
119 "confirm_quit": false,
120 // Whether to restore last closed project when fresh Zed instance is opened.
121 "restore_on_startup": "last_session",
122 // Whether to attempt to restore previous file's state when opening it again.
123 // The state is stored per pane.
124 // When disabled, defaults are applied instead of the state restoration.
125 //
126 // E.g. for editors, selections, folds and scroll positions are restored, if the same file is closed and, later, opened again in the same pane.
127 // When disabled, a single selection in the very beginning of the file, zero scroll position and no folds state is used as a default.
128 //
129 // Default: true
130 "restore_on_file_reopen": true,
131 // Size of the drop target in the editor.
132 "drop_target_size": 0.2,
133 // Whether the window should be closed when using 'close active item' on a window with no tabs.
134 // May take 3 values:
135 // 1. Use the current platform's convention
136 // "when_closing_with_no_tabs": "platform_default"
137 // 2. Always close the window:
138 // "when_closing_with_no_tabs": "close_window",
139 // 3. Never close the window
140 // "when_closing_with_no_tabs": "keep_window_open",
141 "when_closing_with_no_tabs": "platform_default",
142 // What to do when the last window is closed.
143 // May take 2 values:
144 // 1. Use the current platform's convention
145 // "on_last_window_closed": "platform_default"
146 // 2. Always quit the application
147 // "on_last_window_closed": "quit_app",
148 "on_last_window_closed": "platform_default",
149 // Whether to use the system provided dialogs for Open and Save As.
150 // When set to false, Zed will use the built-in keyboard-first pickers.
151 "use_system_path_prompts": true,
152 // Whether to use the system provided dialogs for prompts, such as confirmation
153 // prompts.
154 // When set to false, Zed will use its built-in prompts. Note that on Linux,
155 // this option is ignored and Zed will always use the built-in prompts.
156 "use_system_prompts": true,
157 // Whether the cursor blinks in the editor.
158 "cursor_blink": true,
159 // Cursor shape for the default editor.
160 // 1. A vertical bar
161 // "bar"
162 // 2. A block that surrounds the following character
163 // "block"
164 // 3. An underline / underscore that runs along the following character
165 // "underline"
166 // 4. A box drawn around the following character
167 // "hollow"
168 //
169 // Default: not set, defaults to "bar"
170 "cursor_shape": null,
171 // Determines when the mouse cursor should be hidden in an editor or input box.
172 //
173 // 1. Never hide the mouse cursor:
174 // "never"
175 // 2. Hide only when typing:
176 // "on_typing"
177 // 3. Hide on both typing and cursor movement:
178 // "on_typing_and_movement"
179 "hide_mouse": "on_typing_and_movement",
180 // Determines how snippets are sorted relative to other completion items.
181 //
182 // 1. Place snippets at the top of the completion list:
183 // "top"
184 // 2. Place snippets normally without any preference:
185 // "inline"
186 // 3. Place snippets at the bottom of the completion list:
187 // "bottom"
188 "snippet_sort_order": "inline",
189 // How to highlight the current line in the editor.
190 //
191 // 1. Don't highlight the current line:
192 // "none"
193 // 2. Highlight the gutter area:
194 // "gutter"
195 // 3. Highlight the editor area:
196 // "line"
197 // 4. Highlight the full line (default):
198 // "all"
199 "current_line_highlight": "all",
200 // Whether to highlight all occurrences of the selected text in an editor.
201 "selection_highlight": true,
202 // The debounce delay before querying highlights from the language
203 // server based on the current cursor location.
204 "lsp_highlight_debounce": 75,
205 // Whether to pop the completions menu while typing in an editor without
206 // explicitly requesting it.
207 "show_completions_on_input": true,
208 // Whether to display inline and alongside documentation for items in the
209 // completions menu
210 "show_completion_documentation": true,
211 // Show method signatures in the editor, when inside parentheses.
212 "auto_signature_help": false,
213 // Whether to show the signature help after completion or a bracket pair inserted.
214 // If `auto_signature_help` is enabled, this setting will be treated as enabled also.
215 "show_signature_help_after_edits": false,
216 // What to do when go to definition yields no results.
217 //
218 // 1. Do nothing: `none`
219 // 2. Find references for the same symbol: `find_all_references` (default)
220 "go_to_definition_fallback": "find_all_references",
221 // Whether to show wrap guides (vertical rulers) in the editor.
222 // Setting this to true will show a guide at the 'preferred_line_length' value
223 // if 'soft_wrap' is set to 'preferred_line_length', and will show any
224 // additional guides as specified by the 'wrap_guides' setting.
225 "show_wrap_guides": true,
226 // Character counts at which to show wrap guides in the editor.
227 "wrap_guides": [],
228 // Hide the values of in variables from visual display in private files
229 "redact_private_values": false,
230 // The default number of lines to expand excerpts in the multibuffer by.
231 "expand_excerpt_lines": 5,
232 // Globs to match against file paths to determine if a file is private.
233 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
234 // Whether to use additional LSP queries to format (and amend) the code after
235 // every "trigger" symbol input, defined by LSP server capabilities.
236 "use_on_type_format": true,
237 // Whether to automatically add matching closing characters when typing
238 // opening parenthesis, bracket, brace, single or double quote characters.
239 // For example, when you type (, Zed will add a closing ) at the correct position.
240 "use_autoclose": true,
241 // Whether to automatically surround selected text when typing opening parenthesis,
242 // bracket, brace, single or double quote characters.
243 // For example, when you select text and type (, Zed will surround the text with ().
244 "use_auto_surround": true,
245 // Whether indentation of pasted content should be adjusted based on the context.
246 "auto_indent_on_paste": true,
247 // Controls how the editor handles the autoclosed characters.
248 // When set to `false`(default), skipping over and auto-removing of the closing characters
249 // happen only for auto-inserted characters.
250 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
251 // no matter how they were inserted.
252 "always_treat_brackets_as_autoclosed": false,
253 // Controls where the `editor::Rewrap` action is allowed in the current language scope.
254 //
255 // This setting can take three values:
256 //
257 // 1. Only allow rewrapping in comments:
258 // "in_comments"
259 // 2. Only allow rewrapping in the current selection(s):
260 // "in_selections"
261 // 3. Allow rewrapping anywhere:
262 // "anywhere"
263 //
264 // When using values other than `in_comments`, it is possible for the rewrapping to produce code
265 // that is syntactically invalid. Keep this in mind when selecting which behavior you would like
266 // to use.
267 //
268 // Note: This setting has no effect in Vim mode, as rewrap is already allowed everywhere.
269 "allow_rewrap": "in_comments",
270 // Controls whether edit predictions are shown immediately (true)
271 // or manually by triggering `editor::ShowEditPrediction` (false).
272 "show_edit_predictions": true,
273 // Controls whether edit predictions are shown in a given language scope.
274 // Example: ["string", "comment"]
275 "edit_predictions_disabled_in": [],
276 // Whether to show tabs and spaces in the editor.
277 // This setting can take four values:
278 //
279 // 1. Draw tabs and spaces only for the selected text (default):
280 // "selection"
281 // 2. Do not draw any tabs or spaces:
282 // "none"
283 // 3. Draw all invisible symbols:
284 // "all"
285 // 4. Draw whitespaces at boundaries only:
286 // "boundary"
287 // For a whitespace to be on a boundary, any of the following conditions need to be met:
288 // - It is a tab
289 // - It is adjacent to an edge (start or end)
290 // - It is adjacent to a whitespace (left or right)
291 "show_whitespaces": "selection",
292 // Settings related to calls in Zed
293 "calls": {
294 // Join calls with the microphone live by default
295 "mute_on_join": false,
296 // Share your project when you are the first to join a channel
297 "share_on_join": false
298 },
299 // Toolbar related settings
300 "toolbar": {
301 // Whether to show breadcrumbs.
302 "breadcrumbs": true,
303 // Whether to show quick action buttons.
304 "quick_actions": true,
305 // Whether to show the Selections menu in the editor toolbar.
306 "selections_menu": true,
307 // Whether to show agent review buttons in the editor toolbar.
308 "agent_review": true
309 },
310 // Titlebar related settings
311 "title_bar": {
312 // Whether to show the branch icon beside branch switcher in the title bar.
313 "show_branch_icon": false
314 },
315 // Scrollbar related settings
316 "scrollbar": {
317 // When to show the scrollbar in the editor.
318 // This setting can take four values:
319 //
320 // 1. Show the scrollbar if there's important information or
321 // follow the system's configured behavior (default):
322 // "auto"
323 // 2. Match the system's configured behavior:
324 // "system"
325 // 3. Always show the scrollbar:
326 // "always"
327 // 4. Never show the scrollbar:
328 // "never"
329 "show": "auto",
330 // Whether to show cursor positions in the scrollbar.
331 "cursors": true,
332 // Whether to show git diff indicators in the scrollbar.
333 "git_diff": true,
334 // Whether to show buffer search results in the scrollbar.
335 "search_results": true,
336 // Whether to show selected text occurrences in the scrollbar.
337 "selected_text": true,
338 // Whether to show selected symbol occurrences in the scrollbar.
339 "selected_symbol": true,
340 // Which diagnostic indicators to show in the scrollbar:
341 // - "none" or false: do not show diagnostics
342 // - "error": show only errors
343 // - "warning": show only errors and warnings
344 // - "information": show only errors, warnings, and information
345 // - "all" or true: show all diagnostics
346 "diagnostics": "all",
347 // Forcefully enable or disable the scrollbar for each axis
348 "axes": {
349 // When false, forcefully disables the horizontal scrollbar. Otherwise, obey other settings.
350 "horizontal": true,
351 // When false, forcefully disables the vertical scrollbar. Otherwise, obey other settings.
352 "vertical": true
353 }
354 },
355 // Enable middle-click paste on Linux.
356 "middle_click_paste": true,
357 // What to do when multibuffer is double clicked in some of its excerpts
358 // (parts of singleton buffers).
359 // May take 2 values:
360 // 1. Behave as a regular buffer and select the whole word (default).
361 // "double_click_in_multibuffer": "select"
362 // 2. Open the excerpt clicked as a new buffer in the new tab.
363 // "double_click_in_multibuffer": "open",
364 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
365 "double_click_in_multibuffer": "select",
366 "gutter": {
367 // Whether to show line numbers in the gutter.
368 "line_numbers": true,
369 // Whether to show code action buttons in the gutter.
370 "code_actions": true,
371 // Whether to show runnables buttons in the gutter.
372 "runnables": true,
373 // Whether to show breakpoints in the gutter.
374 "breakpoints": true,
375 // Whether to show fold buttons in the gutter.
376 "folds": true
377 },
378 "indent_guides": {
379 // Whether to show indent guides in the editor.
380 "enabled": true,
381 // The width of the indent guides in pixels, between 1 and 10.
382 "line_width": 1,
383 // The width of the active indent guide in pixels, between 1 and 10.
384 "active_line_width": 1,
385 // Determines how indent guides are colored.
386 // This setting can take the following three values:
387 //
388 // 1. "disabled"
389 // 2. "fixed"
390 // 3. "indent_aware"
391 "coloring": "fixed",
392 // Determines how indent guide backgrounds are colored.
393 // This setting can take the following two values:
394 //
395 // 1. "disabled"
396 // 2. "indent_aware"
397 "background_coloring": "disabled"
398 },
399 // Whether the editor will scroll beyond the last line.
400 "scroll_beyond_last_line": "one_page",
401 // The number of lines to keep above/below the cursor when scrolling.
402 "vertical_scroll_margin": 3,
403 // Whether to scroll when clicking near the edge of the visible text area.
404 "autoscroll_on_clicks": false,
405 // The number of characters to keep on either side when scrolling with the mouse
406 "horizontal_scroll_margin": 5,
407 // Scroll sensitivity multiplier. This multiplier is applied
408 // to both the horizontal and vertical delta values while scrolling.
409 "scroll_sensitivity": 1.0,
410 "relative_line_numbers": false,
411 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
412 "search_wrap": true,
413 // Search options to enable by default when opening new project and buffer searches.
414 "search": {
415 "whole_word": false,
416 "case_sensitive": false,
417 "include_ignored": false,
418 "regex": false
419 },
420 // When to populate a new search's query based on the text under the cursor.
421 // This setting can take the following three values:
422 //
423 // 1. Always populate the search query with the word under the cursor (default).
424 // "always"
425 // 2. Only populate the search query when there is text selected
426 // "selection"
427 // 3. Never populate the search query
428 // "never"
429 "seed_search_query_from_cursor": "always",
430 // When enabled, automatically adjusts search case sensitivity based on your query.
431 // If your search query contains any uppercase letters, the search becomes case-sensitive;
432 // if it contains only lowercase letters, the search becomes case-insensitive.
433 "use_smartcase_search": false,
434 // Inlay hint related settings
435 "inlay_hints": {
436 // Global switch to toggle hints on and off, switched off by default.
437 "enabled": false,
438 // Toggle certain types of hints on and off, all switched on by default.
439 "show_type_hints": true,
440 "show_parameter_hints": true,
441 // Corresponds to null/None LSP hint type value.
442 "show_other_hints": true,
443 // Whether to show a background for inlay hints.
444 //
445 // If set to `true`, the background will use the `hint.background` color from the current theme.
446 "show_background": false,
447 // Time to wait after editing the buffer, before requesting the hints,
448 // set to 0 to disable debouncing.
449 "edit_debounce_ms": 700,
450 // Time to wait after scrolling the buffer, before requesting the hints,
451 // set to 0 to disable debouncing.
452 "scroll_debounce_ms": 50,
453 // A set of modifiers which, when pressed, will toggle the visibility of inlay hints.
454 // If the set if empty or not all the modifiers specified are pressed, inlay hints will not be toggled.
455 "toggle_on_modifiers_press": {
456 "control": false,
457 "shift": false,
458 "alt": false,
459 "platform": false,
460 "function": false
461 }
462 },
463 "project_panel": {
464 // Whether to show the project panel button in the status bar
465 "button": true,
466 // Whether to hide the gitignore entries in the project panel.
467 "hide_gitignore": false,
468 // Default width of the project panel.
469 "default_width": 240,
470 // Where to dock the project panel. Can be 'left' or 'right'.
471 "dock": "left",
472 // Spacing between worktree entries in the project panel. Can be 'comfortable' or 'standard'.
473 "entry_spacing": "comfortable",
474 // Whether to show file icons in the project panel.
475 "file_icons": true,
476 // Whether to show folder icons or chevrons for directories in the project panel.
477 "folder_icons": true,
478 // Whether to show the git status in the project panel.
479 "git_status": true,
480 // Amount of indentation for nested items.
481 "indent_size": 20,
482 // Whether to reveal it in the project panel automatically,
483 // when a corresponding project entry becomes active.
484 // Gitignored entries are never auto revealed.
485 "auto_reveal_entries": true,
486 // Whether to fold directories automatically and show compact folders
487 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
488 "auto_fold_dirs": true,
489 // Scrollbar-related settings
490 "scrollbar": {
491 // When to show the scrollbar in the project panel.
492 // This setting can take five values:
493 //
494 // 1. null (default): Inherit editor settings
495 // 2. Show the scrollbar if there's important information or
496 // follow the system's configured behavior (default):
497 // "auto"
498 // 3. Match the system's configured behavior:
499 // "system"
500 // 4. Always show the scrollbar:
501 // "always"
502 // 5. Never show the scrollbar:
503 // "never"
504 "show": null
505 },
506 // Which files containing diagnostic errors/warnings to mark in the project panel.
507 // This setting can take the following three values:
508 //
509 // 1. Do not mark any files:
510 // "off"
511 // 2. Only mark files with errors:
512 // "errors"
513 // 3. Mark files with errors and warnings:
514 // "all"
515 "show_diagnostics": "all",
516 // Settings related to indent guides in the project panel.
517 "indent_guides": {
518 // When to show indent guides in the project panel.
519 // This setting can take two values:
520 //
521 // 1. Always show indent guides:
522 // "always"
523 // 2. Never show indent guides:
524 // "never"
525 "show": "always"
526 }
527 },
528 "outline_panel": {
529 // Whether to show the outline panel button in the status bar
530 "button": true,
531 // Default width of the outline panel.
532 "default_width": 300,
533 // Where to dock the outline panel. Can be 'left' or 'right'.
534 "dock": "left",
535 // Whether to show file icons in the outline panel.
536 "file_icons": true,
537 // Whether to show folder icons or chevrons for directories in the outline panel.
538 "folder_icons": true,
539 // Whether to show the git status in the outline panel.
540 "git_status": true,
541 // Amount of indentation for nested items.
542 "indent_size": 20,
543 // Whether to reveal it in the outline panel automatically,
544 // when a corresponding outline entry becomes active.
545 // Gitignored entries are never auto revealed.
546 "auto_reveal_entries": true,
547 // Whether to fold directories automatically
548 // when a directory has only one directory inside.
549 "auto_fold_dirs": true,
550 // Settings related to indent guides in the outline panel.
551 "indent_guides": {
552 // When to show indent guides in the outline panel.
553 // This setting can take two values:
554 //
555 // 1. Always show indent guides:
556 // "always"
557 // 2. Never show indent guides:
558 // "never"
559 "show": "always"
560 },
561 // Scrollbar-related settings
562 "scrollbar": {
563 // When to show the scrollbar in the project panel.
564 // This setting can take five values:
565 //
566 // 1. null (default): Inherit editor settings
567 // 2. Show the scrollbar if there's important information or
568 // follow the system's configured behavior (default):
569 // "auto"
570 // 3. Match the system's configured behavior:
571 // "system"
572 // 4. Always show the scrollbar:
573 // "always"
574 // 5. Never show the scrollbar:
575 // "never"
576 "show": null
577 }
578 },
579 "collaboration_panel": {
580 // Whether to show the collaboration panel button in the status bar.
581 "button": true,
582 // Where to dock the collaboration panel. Can be 'left' or 'right'.
583 "dock": "left",
584 // Default width of the collaboration panel.
585 "default_width": 240
586 },
587 "chat_panel": {
588 // When to show the chat panel button in the status bar.
589 // Can be 'never', 'always', or 'when_in_call',
590 // or a boolean (interpreted as 'never'/'always').
591 "button": "when_in_call",
592 // Where to the chat panel. Can be 'left' or 'right'.
593 "dock": "right",
594 // Default width of the chat panel.
595 "default_width": 240
596 },
597 "git_panel": {
598 // Whether to show the git panel button in the status bar.
599 "button": true,
600 // Where to show the git panel. Can be 'left' or 'right'.
601 "dock": "left",
602 // Default width of the git panel.
603 "default_width": 360,
604 // Style of the git status indicator in the panel.
605 //
606 // Default: icon
607 "status_style": "icon",
608 // What branch name to use if init.defaultBranch
609 // is not set
610 //
611 // Default: main
612 "fallback_branch_name": "main",
613
614 // Whether to sort entries in the panel by path
615 // or by status (the default).
616 //
617 // Default: false
618 "sort_by_path": false,
619
620 "scrollbar": {
621 // When to show the scrollbar in the git panel.
622 //
623 // Default: inherits editor scrollbar settings
624 "show": null
625 }
626 },
627 "message_editor": {
628 // Whether to automatically replace emoji shortcodes with emoji characters.
629 // For example: typing `:wave:` gets replaced with `👋`.
630 "auto_replace_emoji_shortcode": true
631 },
632 "notification_panel": {
633 // Whether to show the notification panel button in the status bar.
634 "button": true,
635 // Where to dock the notification panel. Can be 'left' or 'right'.
636 "dock": "right",
637 // Default width of the notification panel.
638 "default_width": 380
639 },
640 "agent": {
641 // Version of this setting.
642 "version": "2",
643 // Whether the agent is enabled.
644 "enabled": true,
645 // Whether to show the agent panel button in the status bar.
646 "button": true,
647 // Where to dock the agent panel. Can be 'left', 'right' or 'bottom'.
648 "dock": "right",
649 // Default width when the agent panel is docked to the left or right.
650 "default_width": 640,
651 // Default height when the agent panel is docked to the bottom.
652 "default_height": 320,
653 // The default model to use when creating new threads.
654 "default_model": {
655 // The provider to use.
656 "provider": "zed.dev",
657 // The model to use.
658 "model": "claude-3-7-sonnet-latest"
659 },
660 // The model to use when applying edits from the agent.
661 "editor_model": {
662 // The provider to use.
663 "provider": "zed.dev",
664 // The model to use.
665 "model": "claude-3-7-sonnet-latest"
666 },
667 // When enabled, the agent can run potentially destructive actions without asking for your confirmation.
668 "always_allow_tool_actions": false,
669 // When enabled, the agent will stream edits.
670 "stream_edits": false,
671 // When enabled, agent edits will be displayed in single-file editors for review
672 "single_file_review": true,
673 "default_profile": "write",
674 "profiles": {
675 "write": {
676 "name": "Write",
677 "enable_all_context_servers": true,
678 "tools": {
679 "copy_path": true,
680 "create_directory": true,
681 "create_file": true,
682 "delete_path": true,
683 "diagnostics": true,
684 "edit_file": true,
685 "fetch": true,
686 "list_directory": true,
687 "move_path": true,
688 "now": true,
689 "find_path": true,
690 "read_file": true,
691 "grep": true,
692 "terminal": true,
693 "thinking": true,
694 "web_search": true
695 }
696 },
697 "ask": {
698 "name": "Ask",
699 // We don't know which of the context server tools are safe for the "Ask" profile, so we don't enable them by default.
700 // "enable_all_context_servers": true,
701 "tools": {
702 "contents": true,
703 "diagnostics": true,
704 "fetch": true,
705 "list_directory": true,
706 "now": true,
707 "find_path": true,
708 "read_file": true,
709 "open": true,
710 "grep": true,
711 "thinking": true,
712 "web_search": true
713 }
714 },
715 "minimal": {
716 "name": "Minimal",
717 "enable_all_context_servers": false,
718 "tools": {}
719 }
720 },
721 // Where to show notifications when the agent has either completed
722 // its response, or else needs confirmation before it can run a
723 // tool action.
724 // "primary_screen" - Show the notification only on your primary screen (default)
725 // "all_screens" - Show these notifications on all screens
726 // "never" - Never show these notifications
727 "notify_when_agent_waiting": "primary_screen"
728 },
729 // The settings for slash commands.
730 "slash_commands": {
731 // Settings for the `/docs` slash command.
732 "docs": {
733 // Whether `/docs` is enabled.
734 "enabled": false
735 },
736 // Settings for the `/project` slash command.
737 "project": {
738 // Whether `/project` is enabled.
739 "enabled": false
740 }
741 },
742 // Whether the screen sharing icon is shown in the os status bar.
743 "show_call_status_icon": true,
744 // Whether to use language servers to provide code intelligence.
745 "enable_language_server": true,
746 // Whether to perform linked edits of associated ranges, if the language server supports it.
747 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
748 "linked_edits": true,
749 // The list of language servers to use (or disable) for all languages.
750 //
751 // This is typically customized on a per-language basis.
752 "language_servers": ["..."],
753 // When to automatically save edited buffers. This setting can
754 // take four values.
755 //
756 // 1. Never automatically save:
757 // "autosave": "off",
758 // 2. Save when changing focus away from the Zed window:
759 // "autosave": "on_window_change",
760 // 3. Save when changing focus away from a specific buffer:
761 // "autosave": "on_focus_change",
762 // 4. Save when idle for a certain amount of time:
763 // "autosave": { "after_delay": {"milliseconds": 500} },
764 "autosave": "off",
765 // Maximum number of tabs per pane. Unset for unlimited.
766 "max_tabs": null,
767 // Settings related to the editor's tab bar.
768 "tab_bar": {
769 // Whether or not to show the tab bar in the editor
770 "show": true,
771 // Whether or not to show the navigation history buttons.
772 "show_nav_history_buttons": true,
773 // Whether or not to show the tab bar buttons.
774 "show_tab_bar_buttons": true
775 },
776 // Settings related to the editor's tabs
777 "tabs": {
778 // Show git status colors in the editor tabs.
779 "git_status": false,
780 // Position of the close button on the editor tabs.
781 // One of: ["right", "left", "hidden"]
782 "close_position": "right",
783 // Whether to show the file icon for a tab.
784 "file_icons": false,
785 // Controls the appearance behavior of the tab's close button.
786 //
787 // 1. Show it just upon hovering the tab. (default)
788 // "hover"
789 // 2. Show it persistently.
790 // "always"
791 // 3. Never show it, even if hovering it.
792 // "hidden"
793 "show_close_button": "hover",
794 // What to do after closing the current tab.
795 //
796 // 1. Activate the tab that was open previously (default)
797 // "history"
798 // 2. Activate the right neighbour tab if present
799 // "neighbour"
800 // 3. Activate the left neighbour tab if present
801 // "left_neighbour"
802 "activate_on_close": "history",
803 // Which files containing diagnostic errors/warnings to mark in the tabs.
804 // Diagnostics are only shown when file icons are also active.
805 // This setting only works when can take the following three values:
806 //
807 // 1. Do not mark any files:
808 // "off"
809 // 2. Only mark files with errors:
810 // "errors"
811 // 3. Mark files with errors and warnings:
812 // "all"
813 "show_diagnostics": "off"
814 },
815 // Settings related to preview tabs.
816 "preview_tabs": {
817 // Whether preview tabs should be enabled.
818 // Preview tabs allow you to open files in preview mode, where they close automatically
819 // when you switch to another file unless you explicitly pin them.
820 // This is useful for quickly viewing files without cluttering your workspace.
821 "enabled": true,
822 // Whether to open tabs in preview mode when selected from the file finder.
823 "enable_preview_from_file_finder": false,
824 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
825 "enable_preview_from_code_navigation": false
826 },
827 // Settings related to the file finder.
828 "file_finder": {
829 // Whether to show file icons in the file finder.
830 "file_icons": true,
831 // Determines how much space the file finder can take up in relation to the available window width.
832 // There are 5 possible width values:
833 //
834 // 1. Small: This value is essentially a fixed width.
835 // "modal_max_width": "small"
836 // 2. Medium:
837 // "modal_max_width": "medium"
838 // 3. Large:
839 // "modal_max_width": "large"
840 // 4. Extra Large:
841 // "modal_max_width": "xlarge"
842 // 5. Fullscreen: This value removes any horizontal padding, as it consumes the whole viewport width.
843 // "modal_max_width": "full"
844 //
845 // Default: small
846 "modal_max_width": "small",
847 // Determines whether the file finder should skip focus for the active file in search results.
848 // There are 2 possible values:
849 //
850 // 1. true: When searching for files, if the currently active file appears as the first result,
851 // auto-focus will skip it and focus the second result instead.
852 // "skip_focus_for_active_in_search": true
853 //
854 // 2. false: When searching for files, the first result will always receive focus,
855 // even if it's the currently active file.
856 // "skip_focus_for_active_in_search": false
857 //
858 // Default: true
859 "skip_focus_for_active_in_search": true
860 },
861 // Whether or not to remove any trailing whitespace from lines of a buffer
862 // before saving it.
863 "remove_trailing_whitespace_on_save": true,
864 // Whether to start a new line with a comment when a previous line is a comment as well.
865 "extend_comment_on_newline": true,
866 // Removes any lines containing only whitespace at the end of the file and
867 // ensures just one newline at the end.
868 "ensure_final_newline_on_save": true,
869 // Whether or not to perform a buffer format before saving
870 //
871 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
872 "format_on_save": "on",
873 // How to perform a buffer format. This setting can take 4 values:
874 //
875 // 1. Format code using the current language server:
876 // "formatter": "language_server"
877 // 2. Format code using an external command:
878 // "formatter": {
879 // "external": {
880 // "command": "prettier",
881 // "arguments": ["--stdin-filepath", "{buffer_path}"]
882 // }
883 // }
884 // 3. Format code using Zed's Prettier integration:
885 // "formatter": "prettier"
886 // 4. Default. Format files using Zed's Prettier integration (if applicable),
887 // or falling back to formatting via language server:
888 // "formatter": "auto"
889 "formatter": "auto",
890 // How to soft-wrap long lines of text.
891 // Possible values:
892 //
893 // 1. Prefer a single line generally, unless an overly long line is encountered.
894 // "soft_wrap": "none",
895 // "soft_wrap": "prefer_line", // (deprecated, same as "none")
896 // 2. Soft wrap lines that overflow the editor.
897 // "soft_wrap": "editor_width",
898 // 3. Soft wrap lines at the preferred line length.
899 // "soft_wrap": "preferred_line_length",
900 // 4. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
901 // "soft_wrap": "bounded",
902 "soft_wrap": "none",
903 // The column at which to soft-wrap lines, for buffers where soft-wrap
904 // is enabled.
905 "preferred_line_length": 80,
906 // Whether to indent lines using tab characters, as opposed to multiple
907 // spaces.
908 "hard_tabs": false,
909 // How many columns a tab should occupy.
910 "tab_size": 4,
911 // What debuggers are preferred by default for all languages.
912 "debuggers": [],
913 // Control what info is collected by Zed.
914 "telemetry": {
915 // Send debug info like crash reports.
916 "diagnostics": true,
917 // Send anonymized usage data like what languages you're using Zed with.
918 "metrics": true
919 },
920 // Automatically update Zed. This setting may be ignored on Linux if
921 // installed through a package manager.
922 "auto_update": true,
923 // Diagnostics configuration.
924 "diagnostics": {
925 // Whether to show warnings or not by default.
926 "include_warnings": true,
927 // Settings for inline diagnostics
928 "inline": {
929 // Whether to show diagnostics inline or not
930 "enabled": false,
931 // The delay in milliseconds to show inline diagnostics after the
932 // last diagnostic update.
933 "update_debounce_ms": 150,
934 // The amount of padding between the end of the source line and the start
935 // of the inline diagnostic in units of em widths.
936 "padding": 4,
937 // The minimum column to display inline diagnostics. This setting can be
938 // used to horizontally align inline diagnostics at some column. Lines
939 // longer than this value will still push diagnostics further to the right.
940 "min_column": 0,
941 // The minimum severity of the diagnostics to show inline.
942 // Shows all diagnostics when not specified.
943 "max_severity": null
944 },
945 "cargo": {
946 // When enabled, Zed disables rust-analyzer's check on save and starts to query
947 // Cargo diagnostics separately.
948 "fetch_cargo_diagnostics": false
949 }
950 },
951 // Files or globs of files that will be excluded by Zed entirely. They will be skipped during file
952 // scans, file searches, and not be displayed in the project file tree. Takes precedence over `file_scan_inclusions`.
953 "file_scan_exclusions": [
954 "**/.git",
955 "**/.svn",
956 "**/.hg",
957 "**/.jj",
958 "**/CVS",
959 "**/.DS_Store",
960 "**/Thumbs.db",
961 "**/.classpath",
962 "**/.settings"
963 ],
964 // Files or globs of files that will be included by Zed, even when ignored by git. This is useful
965 // for files that are not tracked by git, but are still important to your project. Note that globs
966 // that are overly broad can slow down Zed's file scanning. `file_scan_exclusions` takes
967 // precedence over these inclusions.
968 "file_scan_inclusions": [".env*"],
969 // Git gutter behavior configuration.
970 "git": {
971 // Control whether the git gutter is shown. May take 2 values:
972 // 1. Show the gutter
973 // "git_gutter": "tracked_files"
974 // 2. Hide the gutter
975 // "git_gutter": "hide"
976 "git_gutter": "tracked_files",
977 // Control whether the git blame information is shown inline,
978 // in the currently focused line.
979 "inline_blame": {
980 "enabled": true
981 // Sets a delay after which the inline blame information is shown.
982 // Delay is restarted with every cursor movement.
983 // "delay_ms": 600
984 //
985 // Whether or not to display the git commit summary on the same line.
986 // "show_commit_summary": false
987 //
988 // The minimum column number to show the inline blame information at
989 // "min_column": 0
990 },
991 // How git hunks are displayed visually in the editor.
992 // This setting can take two values:
993 //
994 // 1. Show unstaged hunks filled and staged hunks hollow:
995 // "hunk_style": "staged_hollow"
996 // 2. Show unstaged hunks hollow and staged hunks filled:
997 // "hunk_style": "unstaged_hollow"
998 "hunk_style": "staged_hollow"
999 },
1000 // The list of custom Git hosting providers.
1001 "git_hosting_providers": [
1002 // {
1003 // "provider": "github",
1004 // "name": "BigCorp GitHub",
1005 // "base_url": "https://code.big-corp.com"
1006 // }
1007 ],
1008 // Configuration for how direnv configuration should be loaded. May take 2 values:
1009 // 1. Load direnv configuration using `direnv export json` directly.
1010 // "load_direnv": "direct"
1011 // 2. Load direnv configuration through the shell hook, works for POSIX shells and fish.
1012 // "load_direnv": "shell_hook"
1013 "load_direnv": "direct",
1014 "edit_predictions": {
1015 // A list of globs representing files that edit predictions should be disabled for.
1016 // There's a sensible default list of globs already included.
1017 // Any addition to this list will be merged with the default list.
1018 // Globs are matched relative to the worktree root,
1019 // except when starting with a slash (/) or equivalent in Windows.
1020 "disabled_globs": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/.dev.vars", "**/secrets.yml"],
1021 // When to show edit predictions previews in buffer.
1022 // This setting takes two possible values:
1023 // 1. Display predictions inline when there are no language server completions available.
1024 // "mode": "eager"
1025 // 2. Display predictions inline only when holding a modifier key (alt by default).
1026 // "mode": "subtle"
1027 "mode": "eager",
1028 // Whether edit predictions are enabled when editing text threads.
1029 // This setting has no effect if globally disabled.
1030 "enabled_in_text_threads": true
1031 },
1032 // Settings specific to journaling
1033 "journal": {
1034 // The path of the directory where journal entries are stored
1035 "path": "~",
1036 // What format to display the hours in
1037 // May take 2 values:
1038 // 1. hour12
1039 // 2. hour24
1040 "hour_format": "hour12"
1041 },
1042 // Settings specific to the terminal
1043 "terminal": {
1044 // What shell to use when opening a terminal. May take 3 values:
1045 // 1. Use the system's default terminal configuration in /etc/passwd
1046 // "shell": "system"
1047 // 2. A program:
1048 // "shell": {
1049 // "program": "sh"
1050 // }
1051 // 3. A program with arguments:
1052 // "shell": {
1053 // "with_arguments": {
1054 // "program": "/bin/bash",
1055 // "args": ["--login"]
1056 // }
1057 // }
1058 "shell": "system",
1059 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
1060 "dock": "bottom",
1061 // Default width when the terminal is docked to the left or right.
1062 "default_width": 640,
1063 // Default height when the terminal is docked to the bottom.
1064 "default_height": 320,
1065 // What working directory to use when launching the terminal.
1066 // May take 4 values:
1067 // 1. Use the current file's project directory. Will Fallback to the
1068 // first project directory strategy if unsuccessful
1069 // "working_directory": "current_project_directory"
1070 // 2. Use the first project in this workspace's directory
1071 // "working_directory": "first_project_directory"
1072 // 3. Always use this platform's home directory (if we can find it)
1073 // "working_directory": "always_home"
1074 // 4. Always use a specific directory. This value will be shell expanded.
1075 // If this path is not a valid directory the terminal will default to
1076 // this platform's home directory (if we can find it)
1077 // "working_directory": {
1078 // "always": {
1079 // "directory": "~/zed/projects/"
1080 // }
1081 // }
1082 "working_directory": "current_project_directory",
1083 // Set the cursor blinking behavior in the terminal.
1084 // May take 3 values:
1085 // 1. Never blink the cursor, ignoring the terminal mode
1086 // "blinking": "off",
1087 // 2. Default the cursor blink to off, but allow the terminal to
1088 // set blinking
1089 // "blinking": "terminal_controlled",
1090 // 3. Always blink the cursor, ignoring the terminal mode
1091 // "blinking": "on",
1092 "blinking": "terminal_controlled",
1093 // Default cursor shape for the terminal.
1094 // 1. A block that surrounds the following character
1095 // "block"
1096 // 2. A vertical bar
1097 // "bar"
1098 // 3. An underline / underscore that runs along the following character
1099 // "underline"
1100 // 4. A box drawn around the following character
1101 // "hollow"
1102 //
1103 // Default: not set, defaults to "block"
1104 "cursor_shape": null,
1105 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
1106 // Alternate Scroll mode converts mouse scroll events into up / down key
1107 // presses when in the alternate screen (e.g. when running applications
1108 // like vim or less). The terminal can still set and unset this mode.
1109 // May take 2 values:
1110 // 1. Default alternate scroll mode to on
1111 // "alternate_scroll": "on",
1112 // 2. Default alternate scroll mode to off
1113 // "alternate_scroll": "off",
1114 "alternate_scroll": "on",
1115 // Set whether the option key behaves as the meta key.
1116 // May take 2 values:
1117 // 1. Rely on default platform handling of option key, on macOS
1118 // this means generating certain unicode characters
1119 // "option_as_meta": false,
1120 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
1121 // "option_as_meta": true,
1122 "option_as_meta": false,
1123 // Whether or not selecting text in the terminal will automatically
1124 // copy to the system clipboard.
1125 "copy_on_select": false,
1126 // Whether to show the terminal button in the status bar
1127 "button": true,
1128 // Any key-value pairs added to this list will be added to the terminal's
1129 // environment. Use `:` to separate multiple values.
1130 "env": {
1131 // "KEY": "value1:value2"
1132 },
1133 // Set the terminal's line height.
1134 // May take 3 values:
1135 // 1. Use a line height that's comfortable for reading, 1.618
1136 // "line_height": "comfortable"
1137 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
1138 // particularly if they use box characters
1139 // "line_height": "standard",
1140 // 3. Use a custom line height.
1141 // "line_height": {
1142 // "custom": 2
1143 // },
1144 "line_height": "comfortable",
1145 // Activate the python virtual environment, if one is found, in the
1146 // terminal's working directory (as resolved by the working_directory
1147 // setting). Set this to "off" to disable this behavior.
1148 "detect_venv": {
1149 "on": {
1150 // Default directories to search for virtual environments, relative
1151 // to the current working directory. We recommend overriding this
1152 // in your project's settings, rather than globally.
1153 "directories": [".env", "env", ".venv", "venv"],
1154 // Can also be `csh`, `fish`, `nushell` and `power_shell`
1155 "activate_script": "default"
1156 }
1157 },
1158 "toolbar": {
1159 // Whether to display the terminal title in its toolbar's breadcrumbs.
1160 // Only shown if the terminal title is not empty.
1161 //
1162 // The shell running in the terminal needs to be configured to emit the title.
1163 // Example: `echo -e "\e]2;New Title\007";`
1164 "breadcrumbs": true
1165 },
1166 // Scrollbar-related settings
1167 "scrollbar": {
1168 // When to show the scrollbar in the terminal.
1169 // This setting can take five values:
1170 //
1171 // 1. null (default): Inherit editor settings
1172 // 2. Show the scrollbar if there's important information or
1173 // follow the system's configured behavior (default):
1174 // "auto"
1175 // 3. Match the system's configured behavior:
1176 // "system"
1177 // 4. Always show the scrollbar:
1178 // "always"
1179 // 5. Never show the scrollbar:
1180 // "never"
1181 "show": null
1182 }
1183 // Set the terminal's font size. If this option is not included,
1184 // the terminal will default to matching the buffer's font size.
1185 // "font_size": 15,
1186 // Set the terminal's font family. If this option is not included,
1187 // the terminal will default to matching the buffer's font family.
1188 // "font_family": "Zed Plex Mono",
1189 // Set the terminal's font fallbacks. If this option is not included,
1190 // the terminal will default to matching the buffer's font fallbacks.
1191 // This will be merged with the platform's default font fallbacks
1192 // "font_fallbacks": ["FiraCode Nerd Fonts"],
1193 // Sets the maximum number of lines in the terminal's scrollback buffer.
1194 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
1195 // Existing terminals will not pick up this change until they are recreated.
1196 // "max_scroll_history_lines": 10000,
1197 },
1198 "code_actions_on_format": {},
1199 // Settings related to running tasks.
1200 "tasks": {
1201 "variables": {},
1202 "enabled": true
1203 },
1204 // An object whose keys are language names, and whose values
1205 // are arrays of filenames or extensions of files that should
1206 // use those languages.
1207 //
1208 // For example, to treat files like `foo.notjs` as JavaScript,
1209 // and `Embargo.lock` as TOML:
1210 //
1211 // {
1212 // "JavaScript": ["notjs"],
1213 // "TOML": ["Embargo.lock"]
1214 // }
1215 //
1216 "file_types": {
1217 "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "**/.vscode/**/*.json"],
1218 "Shell Script": [".env.*"]
1219 },
1220 // By default use a recent system version of node, or install our own.
1221 // You can override this to use a version of node that is not in $PATH with:
1222 // {
1223 // "node": {
1224 // "path": "/path/to/node"
1225 // "npm_path": "/path/to/npm" (defaults to node_path/../npm)
1226 // }
1227 // }
1228 // or to ensure Zed always downloads and installs an isolated version of node:
1229 // {
1230 // "node": {
1231 // "ignore_system_version": true,
1232 // }
1233 // NOTE: changing this setting currently requires restarting Zed.
1234 "node": {},
1235 // The extensions that Zed should automatically install on startup.
1236 //
1237 // If you don't want any of these extensions, add this field to your settings
1238 // and change the value to `false`.
1239 "auto_install_extensions": {
1240 "html": true
1241 },
1242 // Controls how completions are processed for this language.
1243 "completions": {
1244 // Controls how words are completed.
1245 // For large documents, not all words may be fetched for completion.
1246 //
1247 // May take 3 values:
1248 // 1. "enabled"
1249 // Always fetch document's words for completions along with LSP completions.
1250 // 2. "fallback"
1251 // Only if LSP response errors or times out, use document's words to show completions.
1252 // 3. "disabled"
1253 // Never fetch or complete document's words for completions.
1254 // (Word-based completions can still be queried via a separate action)
1255 //
1256 // Default: fallback
1257 "words": "fallback",
1258 // Whether to fetch LSP completions or not.
1259 //
1260 // Default: true
1261 "lsp": true,
1262 // When fetching LSP completions, determines how long to wait for a response of a particular server.
1263 // When set to 0, waits indefinitely.
1264 //
1265 // Default: 0
1266 "lsp_fetch_timeout_ms": 0,
1267 // Controls what range to replace when accepting LSP completions.
1268 //
1269 // When LSP servers give an `InsertReplaceEdit` completion, they provides two ranges: `insert` and `replace`. Usually, `insert`
1270 // contains the word prefix before your cursor and `replace` contains the whole word.
1271 //
1272 // Effectively, this setting just changes whether Zed will use the received range for `insert` or `replace`, so the results may
1273 // differ depending on the underlying LSP server.
1274 //
1275 // Possible values:
1276 // 1. "insert"
1277 // Replaces text before the cursor, using the `insert` range described in the LSP specification.
1278 // 2. "replace"
1279 // Replaces text before and after the cursor, using the `replace` range described in the LSP specification.
1280 // 3. "replace_subsequence"
1281 // Behaves like `"replace"` if the text that would be replaced is a subsequence of the completion text,
1282 // and like `"insert"` otherwise.
1283 // 4. "replace_suffix"
1284 // Behaves like `"replace"` if the text after the cursor is a suffix of the completion, and like
1285 // `"insert"` otherwise.
1286 "lsp_insert_mode": "replace_suffix"
1287 },
1288 // Different settings for specific languages.
1289 "languages": {
1290 "Astro": {
1291 "language_servers": ["astro-language-server", "..."],
1292 "prettier": {
1293 "allowed": true,
1294 "plugins": ["prettier-plugin-astro"]
1295 }
1296 },
1297 "Blade": {
1298 "prettier": {
1299 "allowed": true
1300 }
1301 },
1302 "C": {
1303 "format_on_save": "off",
1304 "use_on_type_format": false,
1305 "prettier": {
1306 "allowed": false
1307 }
1308 },
1309 "C++": {
1310 "format_on_save": "off",
1311 "use_on_type_format": false,
1312 "prettier": {
1313 "allowed": false
1314 }
1315 },
1316 "CSS": {
1317 "prettier": {
1318 "allowed": true
1319 }
1320 },
1321 "Dart": {
1322 "tab_size": 2
1323 },
1324 "Diff": {
1325 "show_edit_predictions": false,
1326 "remove_trailing_whitespace_on_save": false,
1327 "ensure_final_newline_on_save": false
1328 },
1329 "Elixir": {
1330 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1331 },
1332 "Elm": {
1333 "tab_size": 4
1334 },
1335 "Erlang": {
1336 "language_servers": ["erlang-ls", "!elp", "..."]
1337 },
1338 "Git Commit": {
1339 "allow_rewrap": "anywhere"
1340 },
1341 "Go": {
1342 "code_actions_on_format": {
1343 "source.organizeImports": true
1344 }
1345 },
1346 "GraphQL": {
1347 "prettier": {
1348 "allowed": true
1349 }
1350 },
1351 "HEEX": {
1352 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1353 },
1354 "HTML": {
1355 "prettier": {
1356 "allowed": true
1357 }
1358 },
1359 "Java": {
1360 "prettier": {
1361 "allowed": true,
1362 "plugins": ["prettier-plugin-java"]
1363 }
1364 },
1365 "JavaScript": {
1366 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1367 "prettier": {
1368 "allowed": true
1369 }
1370 },
1371 "JSON": {
1372 "prettier": {
1373 "allowed": true
1374 }
1375 },
1376 "JSONC": {
1377 "prettier": {
1378 "allowed": true
1379 }
1380 },
1381 "LaTeX": {
1382 "format_on_save": "on",
1383 "formatter": "language_server",
1384 "language_servers": ["texlab", "..."],
1385 "prettier": {
1386 "allowed": false
1387 }
1388 },
1389 "Markdown": {
1390 "format_on_save": "off",
1391 "use_on_type_format": false,
1392 "allow_rewrap": "anywhere",
1393 "soft_wrap": "editor_width",
1394 "prettier": {
1395 "allowed": true
1396 }
1397 },
1398 "PHP": {
1399 "language_servers": ["phpactor", "!intelephense", "..."],
1400 "prettier": {
1401 "allowed": true,
1402 "plugins": ["@prettier/plugin-php"],
1403 "parser": "php"
1404 }
1405 },
1406 "Plain Text": {
1407 "allow_rewrap": "anywhere"
1408 },
1409 "Ruby": {
1410 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
1411 },
1412 "SCSS": {
1413 "prettier": {
1414 "allowed": true
1415 }
1416 },
1417 "SQL": {
1418 "prettier": {
1419 "allowed": true,
1420 "plugins": ["prettier-plugin-sql"]
1421 }
1422 },
1423 "Starlark": {
1424 "language_servers": ["starpls", "!buck2-lsp", "..."]
1425 },
1426 "Svelte": {
1427 "language_servers": ["svelte-language-server", "..."],
1428 "prettier": {
1429 "allowed": true,
1430 "plugins": ["prettier-plugin-svelte"]
1431 }
1432 },
1433 "TSX": {
1434 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1435 "prettier": {
1436 "allowed": true
1437 }
1438 },
1439 "Twig": {
1440 "prettier": {
1441 "allowed": true
1442 }
1443 },
1444 "TypeScript": {
1445 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1446 "prettier": {
1447 "allowed": true
1448 }
1449 },
1450 "Vue.js": {
1451 "language_servers": ["vue-language-server", "..."],
1452 "prettier": {
1453 "allowed": true
1454 }
1455 },
1456 "XML": {
1457 "prettier": {
1458 "allowed": true,
1459 "plugins": ["@prettier/plugin-xml"]
1460 }
1461 },
1462 "YAML": {
1463 "prettier": {
1464 "allowed": true
1465 }
1466 },
1467 "Zig": {
1468 "language_servers": ["zls", "..."]
1469 }
1470 },
1471 // Different settings for specific language models.
1472 "language_models": {
1473 "anthropic": {
1474 "version": "1",
1475 "api_url": "https://api.anthropic.com"
1476 },
1477 "google": {
1478 "api_url": "https://generativelanguage.googleapis.com"
1479 },
1480 "ollama": {
1481 "api_url": "http://localhost:11434"
1482 },
1483 "openai": {
1484 "version": "1",
1485 "api_url": "https://api.openai.com/v1"
1486 },
1487 "lmstudio": {
1488 "api_url": "http://localhost:1234/api/v0"
1489 },
1490 "deepseek": {
1491 "api_url": "https://api.deepseek.com"
1492 },
1493 "mistral": {
1494 "api_url": "https://api.mistral.ai/v1"
1495 }
1496 },
1497 // Zed's Prettier integration settings.
1498 // Allows to enable/disable formatting with Prettier
1499 // and configure default Prettier, used when no project-level Prettier installation is found.
1500 "prettier": {
1501 // // Whether to consider prettier formatter or not when attempting to format a file.
1502 // "allowed": false,
1503 //
1504 // // Use regular Prettier json configuration.
1505 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1506 // // the project has no other Prettier installed.
1507 // "plugins": [],
1508 //
1509 // // Use regular Prettier json configuration.
1510 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1511 // // the project has no other Prettier installed.
1512 // "trailingComma": "es5",
1513 // "tabWidth": 4,
1514 // "semi": false,
1515 // "singleQuote": true
1516 },
1517 // Settings for auto-closing of JSX tags.
1518 "jsx_tag_auto_close": {
1519 "enabled": true
1520 },
1521 // LSP Specific settings.
1522 "lsp": {
1523 // Specify the LSP name as a key here.
1524 // "rust-analyzer": {
1525 // // A special flag for rust-analyzer integration, to use server-provided tasks
1526 // enable_lsp_tasks": true,
1527 // // These initialization options are merged into Zed's defaults
1528 // "initialization_options": {
1529 // "check": {
1530 // "command": "clippy" // rust-analyzer.check.command (default: "check")
1531 // }
1532 // }
1533 // }
1534 },
1535 // Jupyter settings
1536 "jupyter": {
1537 "enabled": true
1538 // Specify the language name as the key and the kernel name as the value.
1539 // "kernel_selections": {
1540 // "python": "conda-base"
1541 // "typescript": "deno"
1542 // }
1543 },
1544 // Vim settings
1545 "vim": {
1546 "default_mode": "normal",
1547 "toggle_relative_line_numbers": false,
1548 "use_system_clipboard": "always",
1549 "use_multiline_find": false,
1550 "use_smartcase_find": false,
1551 "highlight_on_yank_duration": 200,
1552 "custom_digraphs": {},
1553 // Cursor shape for the each mode.
1554 // Specify the mode as the key and the shape as the value.
1555 // The mode can be one of the following: "normal", "replace", "insert", "visual".
1556 // The shape can be one of the following: "block", "bar", "underline", "hollow".
1557 "cursor_shape": {}
1558 },
1559 // The server to connect to. If the environment variable
1560 // ZED_SERVER_URL is set, it will override this setting.
1561 "server_url": "https://zed.dev",
1562 // Settings overrides to use when using Zed Preview.
1563 // Mostly useful for developers who are managing multiple instances of Zed.
1564 "preview": {
1565 // "theme": "Andromeda"
1566 },
1567 // Settings overrides to use when using Zed Nightly.
1568 // Mostly useful for developers who are managing multiple instances of Zed.
1569 "nightly": {
1570 // "theme": "Andromeda"
1571 },
1572 // Settings overrides to use when using Zed Stable.
1573 // Mostly useful for developers who are managing multiple instances of Zed.
1574 "stable": {
1575 // "theme": "Andromeda"
1576 },
1577 // Settings overrides to use when using Zed Dev.
1578 // Mostly useful for developers who are managing multiple instances of Zed.
1579 "dev": {
1580 // "theme": "Andromeda"
1581 },
1582 // Whether to show full labels in line indicator or short ones
1583 //
1584 // Values:
1585 // - `short`: "2 s, 15 l, 32 c"
1586 // - `long`: "2 selections, 15 lines, 32 characters"
1587 // Default: long
1588 "line_indicator_format": "long",
1589 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1590 //
1591 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1592 // `socks5h`. `http` will be used when no scheme is specified.
1593 //
1594 // By default no proxy will be used, or Zed will try get proxy settings from
1595 // environment variables.
1596 //
1597 // Examples:
1598 // - "proxy": "socks5h://localhost:10808"
1599 // - "proxy": "http://127.0.0.1:10809"
1600 "proxy": null,
1601 // Set to configure aliases for the command palette.
1602 // When typing a query which is a key of this object, the value will be used instead.
1603 //
1604 // Examples:
1605 // {
1606 // "W": "workspace::Save"
1607 // }
1608 "command_aliases": {},
1609 // Whether to show user picture in titlebar.
1610 "show_user_picture": true,
1611 // ssh_connections is an array of ssh connections.
1612 // You can configure these from `project: Open Remote` in the command palette.
1613 // Zed's ssh support will pull configuration from your ~/.ssh too.
1614 // Examples:
1615 // [
1616 // {
1617 // "host": "example-box",
1618 // // "port": 22, "username": "test", "args": ["-i", "/home/user/.ssh/id_rsa"]
1619 // "projects": [
1620 // {
1621 // "paths": ["/home/user/code/zed"]
1622 // }
1623 // ]
1624 // }
1625 // ]
1626 "ssh_connections": [],
1627 // Configures context servers for use by the agent.
1628 "context_servers": {},
1629 "debugger": {
1630 "stepping_granularity": "line",
1631 "save_breakpoints": true,
1632 "button": true
1633 }
1634}