1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 "icon_theme": "Zed (Default)",
14 // The name of a base set of key bindings to use.
15 // This setting can take six values, each named after another
16 // text editor:
17 //
18 // 1. "VSCode"
19 // 2. "Atom"
20 // 3. "JetBrains"
21 // 4. "None"
22 // 5. "SublimeText"
23 // 6. "TextMate"
24 "base_keymap": "VSCode",
25 // Features that can be globally enabled or disabled
26 "features": {
27 // Which edit prediction provider to use.
28 "edit_prediction_provider": "copilot"
29 },
30 // The name of a font to use for rendering text in the editor
31 "buffer_font_family": "Zed Plex Mono",
32 // Set the buffer text's font fallbacks, this will be merged with
33 // the platform's default fallbacks.
34 "buffer_font_fallbacks": null,
35 // The OpenType features to enable for text in the editor.
36 "buffer_font_features": {
37 // Disable ligatures:
38 // "calt": false
39 },
40 // The default font size for text in the editor
41 "buffer_font_size": 15,
42 // The weight of the editor font in standard CSS units from 100 to 900.
43 "buffer_font_weight": 400,
44 // Set the buffer's line height.
45 // May take 3 values:
46 // 1. Use a line height that's comfortable for reading (1.618)
47 // "buffer_line_height": "comfortable"
48 // 2. Use a standard line height, (1.3)
49 // "buffer_line_height": "standard",
50 // 3. Use a custom line height
51 // "buffer_line_height": {
52 // "custom": 2
53 // },
54 "buffer_line_height": "comfortable",
55 // The name of a font to use for rendering text in the UI
56 // You can set this to ".SystemUIFont" to use the system font
57 "ui_font_family": "Zed Plex Sans",
58 // Set the UI's font fallbacks, this will be merged with the platform's
59 // default font fallbacks.
60 "ui_font_fallbacks": null,
61 // The OpenType features to enable for text in the UI
62 "ui_font_features": {
63 // Disable ligatures:
64 "calt": false
65 },
66 // The weight of the UI font in standard CSS units from 100 to 900.
67 "ui_font_weight": 400,
68 // The default font size for text in the UI
69 "ui_font_size": 16,
70 // How much to fade out unused code.
71 "unnecessary_code_fade": 0.3,
72 // Active pane styling settings.
73 "active_pane_modifiers": {
74 // The factor to grow the active pane by. Defaults to 1.0
75 // which gives the same size as all other panes.
76 "magnification": 1.0,
77 // Inset border size of the active pane, in pixels.
78 "border_size": 0.0,
79 // Opacity of the inactive panes. 0 means transparent, 1 means opaque.
80 // Values are clamped to the [0.0, 1.0] range.
81 "inactive_opacity": 1.0
82 },
83 // The direction that you want to split panes horizontally. Defaults to "up"
84 "pane_split_direction_horizontal": "up",
85 // The direction that you want to split panes horizontally. Defaults to "left"
86 "pane_split_direction_vertical": "left",
87 // Centered layout related settings.
88 "centered_layout": {
89 // The relative width of the left padding of the central pane from the
90 // workspace when the centered layout is used.
91 "left_padding": 0.2,
92 // The relative width of the right padding of the central pane from the
93 // workspace when the centered layout is used.
94 "right_padding": 0.2
95 },
96 // All settings related to the image viewer.
97 "image_viewer": {
98 // The unit for image file sizes.
99 // By default we're setting it to binary.
100 // The second option is decimal.
101 "unit": "binary"
102 },
103 // The key to use for adding multiple cursors
104 // Currently "alt" or "cmd_or_ctrl" (also aliased as
105 // "cmd" and "ctrl") are supported.
106 "multi_cursor_modifier": "alt",
107 // Whether to enable vim modes and key bindings.
108 "vim_mode": false,
109 // Whether to show the informational hover box when moving the mouse
110 // over symbols in the editor.
111 "hover_popover_enabled": true,
112 // Time to wait before showing the informational hover box
113 "hover_popover_delay": 350,
114 // Whether to confirm before quitting Zed.
115 "confirm_quit": false,
116 // Whether to restore last closed project when fresh Zed instance is opened.
117 "restore_on_startup": "last_session",
118 // Size of the drop target in the editor.
119 "drop_target_size": 0.2,
120 // Whether the window should be closed when using 'close active item' on a window with no tabs.
121 // May take 3 values:
122 // 1. Use the current platform's convention
123 // "when_closing_with_no_tabs": "platform_default"
124 // 2. Always close the window:
125 // "when_closing_with_no_tabs": "close_window",
126 // 3. Never close the window
127 // "when_closing_with_no_tabs": "keep_window_open",
128 "when_closing_with_no_tabs": "platform_default",
129 // What to do when the last window is closed.
130 // May take 2 values:
131 // 1. Use the current platform's convention
132 // "on_last_window_closed": "platform_default"
133 // 2. Always quit the application
134 // "on_last_window_closed": "quit_app",
135 "on_last_window_closed": "platform_default",
136 // Whether to use the system provided dialogs for Open and Save As.
137 // When set to false, Zed will use the built-in keyboard-first pickers.
138 "use_system_path_prompts": true,
139 // Whether the cursor blinks in the editor.
140 "cursor_blink": true,
141 // Cursor shape for the default editor.
142 // 1. A vertical bar
143 // "bar"
144 // 2. A block that surrounds the following character
145 // "block"
146 // 3. An underline / underscore that runs along the following character
147 // "underline"
148 // 4. A box drawn around the following character
149 // "hollow"
150 //
151 // Default: not set, defaults to "bar"
152 "cursor_shape": null,
153 // How to highlight the current line in the editor.
154 //
155 // 1. Don't highlight the current line:
156 // "none"
157 // 2. Highlight the gutter area:
158 // "gutter"
159 // 3. Highlight the editor area:
160 // "line"
161 // 4. Highlight the full line (default):
162 // "all"
163 "current_line_highlight": "all",
164 // Whether to highlight all occurrences of the selected text in an editor.
165 "selection_highlight": true,
166 // The debounce delay before querying highlights based on the selected text.
167 "selection_highlight_debounce": 50,
168 // The debounce delay before querying highlights from the language
169 // server based on the current cursor location.
170 "lsp_highlight_debounce": 75,
171 // Whether to pop the completions menu while typing in an editor without
172 // explicitly requesting it.
173 "show_completions_on_input": true,
174 // Whether to display inline and alongside documentation for items in the
175 // completions menu
176 "show_completion_documentation": true,
177 // Show method signatures in the editor, when inside parentheses.
178 "auto_signature_help": false,
179 // Whether to show the signature help after completion or a bracket pair inserted.
180 // If `auto_signature_help` is enabled, this setting will be treated as enabled also.
181 "show_signature_help_after_edits": false,
182 // Whether to show wrap guides (vertical rulers) in the editor.
183 // Setting this to true will show a guide at the 'preferred_line_length' value
184 // if 'soft_wrap' is set to 'preferred_line_length', and will show any
185 // additional guides as specified by the 'wrap_guides' setting.
186 "show_wrap_guides": true,
187 // Character counts at which to show wrap guides in the editor.
188 "wrap_guides": [],
189 // Hide the values of in variables from visual display in private files
190 "redact_private_values": false,
191 // The default number of lines to expand excerpts in the multibuffer by.
192 "expand_excerpt_lines": 3,
193 // Globs to match against file paths to determine if a file is private.
194 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
195 // Whether to use additional LSP queries to format (and amend) the code after
196 // every "trigger" symbol input, defined by LSP server capabilities.
197 "use_on_type_format": true,
198 // Whether to automatically add matching closing characters when typing
199 // opening parenthesis, bracket, brace, single or double quote characters.
200 // For example, when you type (, Zed will add a closing ) at the correct position.
201 "use_autoclose": true,
202 // Whether to automatically surround selected text when typing opening parenthesis,
203 // bracket, brace, single or double quote characters.
204 // For example, when you select text and type (, Zed will surround the text with ().
205 "use_auto_surround": true,
206 // Whether indentation of pasted content should be adjusted based on the context.
207 "auto_indent_on_paste": true,
208 // Controls how the editor handles the autoclosed characters.
209 // When set to `false`(default), skipping over and auto-removing of the closing characters
210 // happen only for auto-inserted characters.
211 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
212 // no matter how they were inserted.
213 "always_treat_brackets_as_autoclosed": false,
214 // Controls where the `editor::Rewrap` action is allowed in the current language scope.
215 //
216 // This setting can take three values:
217 //
218 // 1. Only allow rewrapping in comments:
219 // "in_comments"
220 // 2. Only allow rewrapping in the current selection(s):
221 // "in_selections"
222 // 3. Allow rewrapping anywhere:
223 // "anywhere"
224 //
225 // When using values other than `in_comments`, it is possible for the rewrapping to produce code
226 // that is syntactically invalid. Keep this in mind when selecting which behavior you would like
227 // to use.
228 //
229 // Note: This setting has no effect in Vim mode, as rewrap is already allowed everywhere.
230 "allow_rewrap": "in_comments",
231 // Controls whether edit predictions are shown immediately (true)
232 // or manually by triggering `editor::ShowEditPrediction` (false).
233 "show_edit_predictions": true,
234 // Controls whether edit predictions are shown in a given language scope.
235 // Example: ["string", "comment"]
236 "edit_predictions_disabled_in": [],
237 // Whether to show tabs and spaces in the editor.
238 // This setting can take four values:
239 //
240 // 1. Draw tabs and spaces only for the selected text (default):
241 // "selection"
242 // 2. Do not draw any tabs or spaces:
243 // "none"
244 // 3. Draw all invisible symbols:
245 // "all"
246 // 4. Draw whitespaces at boundaries only:
247 // "boundary"
248 // For a whitespace to be on a boundary, any of the following conditions need to be met:
249 // - It is a tab
250 // - It is adjacent to an edge (start or end)
251 // - It is adjacent to a whitespace (left or right)
252 "show_whitespaces": "selection",
253 // Settings related to calls in Zed
254 "calls": {
255 // Join calls with the microphone live by default
256 "mute_on_join": false,
257 // Share your project when you are the first to join a channel
258 "share_on_join": false
259 },
260 // Toolbar related settings
261 "toolbar": {
262 // Whether to show breadcrumbs.
263 "breadcrumbs": true,
264 // Whether to show quick action buttons.
265 "quick_actions": true,
266 // Whether to show the Selections menu in the editor toolbar
267 "selections_menu": true
268 },
269 // Scrollbar related settings
270 "scrollbar": {
271 // When to show the scrollbar in the editor.
272 // This setting can take four values:
273 //
274 // 1. Show the scrollbar if there's important information or
275 // follow the system's configured behavior (default):
276 // "auto"
277 // 2. Match the system's configured behavior:
278 // "system"
279 // 3. Always show the scrollbar:
280 // "always"
281 // 4. Never show the scrollbar:
282 // "never"
283 "show": "auto",
284 // Whether to show cursor positions in the scrollbar.
285 "cursors": true,
286 // Whether to show git diff indicators in the scrollbar.
287 "git_diff": true,
288 // Whether to show buffer search results in the scrollbar.
289 "search_results": true,
290 // Whether to show selected text occurrences in the scrollbar.
291 "selected_text": true,
292 // Whether to show selected symbol occurrences in the scrollbar.
293 "selected_symbol": true,
294 // Which diagnostic indicators to show in the scrollbar:
295 // - "none" or false: do not show diagnostics
296 // - "error": show only errors
297 // - "warning": show only errors and warnings
298 // - "information": show only errors, warnings, and information
299 // - "all" or true: show all diagnostics
300 "diagnostics": "all",
301 // Forcefully enable or disable the scrollbar for each axis
302 "axes": {
303 // When false, forcefully disables the horizontal scrollbar. Otherwise, obey other settings.
304 "horizontal": true,
305 // When false, forcefully disables the vertical scrollbar. Otherwise, obey other settings.
306 "vertical": true
307 }
308 },
309 // Enable middle-click paste on Linux.
310 "middle_click_paste": true,
311 // What to do when multibuffer is double clicked in some of its excerpts
312 // (parts of singleton buffers).
313 // May take 2 values:
314 // 1. Behave as a regular buffer and select the whole word (default).
315 // "double_click_in_multibuffer": "select"
316 // 2. Open the excerpt clicked as a new buffer in the new tab.
317 // "double_click_in_multibuffer": "open",
318 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
319 "double_click_in_multibuffer": "select",
320 "gutter": {
321 // Whether to show line numbers in the gutter.
322 "line_numbers": true,
323 // Whether to show code action buttons in the gutter.
324 "code_actions": true,
325 // Whether to show runnables buttons in the gutter.
326 "runnables": true,
327 // Whether to show fold buttons in the gutter.
328 "folds": true
329 },
330 "indent_guides": {
331 // Whether to show indent guides in the editor.
332 "enabled": true,
333 // The width of the indent guides in pixels, between 1 and 10.
334 "line_width": 1,
335 // The width of the active indent guide in pixels, between 1 and 10.
336 "active_line_width": 1,
337 // Determines how indent guides are colored.
338 // This setting can take the following three values:
339 ///
340 // 1. "disabled"
341 // 2. "fixed"
342 // 3. "indent_aware"
343 "coloring": "fixed",
344 // Determines how indent guide backgrounds are colored.
345 // This setting can take the following two values:
346 ///
347 // 1. "disabled"
348 // 2. "indent_aware"
349 "background_coloring": "disabled"
350 },
351 // Whether the editor will scroll beyond the last line.
352 "scroll_beyond_last_line": "one_page",
353 // The number of lines to keep above/below the cursor when scrolling.
354 "vertical_scroll_margin": 3,
355 // Whether to scroll when clicking near the edge of the visible text area.
356 "autoscroll_on_clicks": false,
357 // The number of characters to keep on either side when scrolling with the mouse
358 "horizontal_scroll_margin": 5,
359 // Scroll sensitivity multiplier. This multiplier is applied
360 // to both the horizontal and vertical delta values while scrolling.
361 "scroll_sensitivity": 1.0,
362 "relative_line_numbers": false,
363 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
364 "search_wrap": true,
365 // Search options to enable by default when opening new project and buffer searches.
366 "search": {
367 "whole_word": false,
368 "case_sensitive": false,
369 "include_ignored": false,
370 "regex": false
371 },
372 // When to populate a new search's query based on the text under the cursor.
373 // This setting can take the following three values:
374 //
375 // 1. Always populate the search query with the word under the cursor (default).
376 // "always"
377 // 2. Only populate the search query when there is text selected
378 // "selection"
379 // 3. Never populate the search query
380 // "never"
381 "seed_search_query_from_cursor": "always",
382 // When enabled, automatically adjusts search case sensitivity based on your query.
383 // If your search query contains any uppercase letters, the search becomes case-sensitive;
384 // if it contains only lowercase letters, the search becomes case-insensitive.
385 "use_smartcase_search": false,
386 // Inlay hint related settings
387 "inlay_hints": {
388 // Global switch to toggle hints on and off, switched off by default.
389 "enabled": false,
390 // Toggle certain types of hints on and off, all switched on by default.
391 "show_type_hints": true,
392 "show_parameter_hints": true,
393 // Corresponds to null/None LSP hint type value.
394 "show_other_hints": true,
395 // Whether to show a background for inlay hints.
396 //
397 // If set to `true`, the background will use the `hint.background` color from the current theme.
398 "show_background": false,
399 // Time to wait after editing the buffer, before requesting the hints,
400 // set to 0 to disable debouncing.
401 "edit_debounce_ms": 700,
402 // Time to wait after scrolling the buffer, before requesting the hints,
403 // set to 0 to disable debouncing.
404 "scroll_debounce_ms": 50
405 },
406 "project_panel": {
407 // Whether to show the project panel button in the status bar
408 "button": true,
409 // Default width of the project panel.
410 "default_width": 240,
411 // Where to dock the project panel. Can be 'left' or 'right'.
412 "dock": "left",
413 // Spacing between worktree entries in the project panel. Can be 'comfortable' or 'standard'.
414 "entry_spacing": "comfortable",
415 // Whether to show file icons in the project panel.
416 "file_icons": true,
417 // Whether to show folder icons or chevrons for directories in the project panel.
418 "folder_icons": true,
419 // Whether to show the git status in the project panel.
420 "git_status": true,
421 // Amount of indentation for nested items.
422 "indent_size": 20,
423 // Whether to reveal it in the project panel automatically,
424 // when a corresponding project entry becomes active.
425 // Gitignored entries are never auto revealed.
426 "auto_reveal_entries": true,
427 // Whether to fold directories automatically and show compact folders
428 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
429 "auto_fold_dirs": true,
430 // Scrollbar-related settings
431 "scrollbar": {
432 // When to show the scrollbar in the project panel.
433 // This setting can take five values:
434 ///
435 // 1. null (default): Inherit editor settings
436 // 2. Show the scrollbar if there's important information or
437 // follow the system's configured behavior (default):
438 // "auto"
439 // 3. Match the system's configured behavior:
440 // "system"
441 // 4. Always show the scrollbar:
442 // "always"
443 // 5. Never show the scrollbar:
444 // "never"
445 "show": null
446 },
447 // Which files containing diagnostic errors/warnings to mark in the project panel.
448 // This setting can take the following three values:
449 ///
450 // 1. Do not mark any files:
451 // "off"
452 // 2. Only mark files with errors:
453 // "errors"
454 // 3. Mark files with errors and warnings:
455 // "all"
456 "show_diagnostics": "all",
457 // Settings related to indent guides in the project panel.
458 "indent_guides": {
459 // When to show indent guides in the project panel.
460 // This setting can take two values:
461 //
462 // 1. Always show indent guides:
463 // "always"
464 // 2. Never show indent guides:
465 // "never"
466 "show": "always"
467 }
468 },
469 "outline_panel": {
470 // Whether to show the outline panel button in the status bar
471 "button": true,
472 // Default width of the outline panel.
473 "default_width": 300,
474 // Where to dock the outline panel. Can be 'left' or 'right'.
475 "dock": "left",
476 // Whether to show file icons in the outline panel.
477 "file_icons": true,
478 // Whether to show folder icons or chevrons for directories in the outline panel.
479 "folder_icons": true,
480 // Whether to show the git status in the outline panel.
481 "git_status": true,
482 // Amount of indentation for nested items.
483 "indent_size": 20,
484 // Whether to reveal it in the outline panel automatically,
485 // when a corresponding outline entry becomes active.
486 // Gitignored entries are never auto revealed.
487 "auto_reveal_entries": true,
488 // Whether to fold directories automatically
489 // when a directory has only one directory inside.
490 "auto_fold_dirs": true,
491 // Settings related to indent guides in the outline panel.
492 "indent_guides": {
493 // When to show indent guides in the outline panel.
494 // This setting can take two values:
495 //
496 // 1. Always show indent guides:
497 // "always"
498 // 2. Never show indent guides:
499 // "never"
500 "show": "always"
501 },
502 // Scrollbar-related settings
503 "scrollbar": {
504 // When to show the scrollbar in the project panel.
505 // This setting can take five values:
506 ///
507 // 1. null (default): Inherit editor settings
508 // 2. Show the scrollbar if there's important information or
509 // follow the system's configured behavior (default):
510 // "auto"
511 // 3. Match the system's configured behavior:
512 // "system"
513 // 4. Always show the scrollbar:
514 // "always"
515 // 5. Never show the scrollbar:
516 // "never"
517 "show": null
518 }
519 },
520 "collaboration_panel": {
521 // Whether to show the collaboration panel button in the status bar.
522 "button": true,
523 // Where to dock the collaboration panel. Can be 'left' or 'right'.
524 "dock": "left",
525 // Default width of the collaboration panel.
526 "default_width": 240
527 },
528 "chat_panel": {
529 // When to show the chat panel button in the status bar.
530 // Can be 'never', 'always', or 'when_in_call',
531 // or a boolean (interpreted as 'never'/'always').
532 "button": "when_in_call",
533 // Where to the chat panel. Can be 'left' or 'right'.
534 "dock": "right",
535 // Default width of the chat panel.
536 "default_width": 240
537 },
538 "git_panel": {
539 // Whether to show the git panel button in the status bar.
540 "button": true,
541 // Where to the git panel. Can be 'left' or 'right'.
542 "dock": "left",
543 // Default width of the git panel.
544 "default_width": 360,
545 // Style of the git status indicator in the panel.
546 //
547 // Default: icon
548 "status_style": "icon",
549 "scrollbar": {
550 // When to show the scrollbar in the git panel.
551 //
552 // Default: inherits editor scrollbar settings
553 "show": null
554 }
555 },
556 "message_editor": {
557 // Whether to automatically replace emoji shortcodes with emoji characters.
558 // For example: typing `:wave:` gets replaced with `👋`.
559 "auto_replace_emoji_shortcode": true
560 },
561 "notification_panel": {
562 // Whether to show the notification panel button in the status bar.
563 "button": true,
564 // Where to dock the notification panel. Can be 'left' or 'right'.
565 "dock": "right",
566 // Default width of the notification panel.
567 "default_width": 380
568 },
569 "assistant": {
570 // Version of this setting.
571 "version": "2",
572 // Whether the assistant is enabled.
573 "enabled": true,
574 // Whether to show the assistant panel button in the status bar.
575 "button": true,
576 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
577 "dock": "right",
578 // Default width when the assistant is docked to the left or right.
579 "default_width": 640,
580 // Default height when the assistant is docked to the bottom.
581 "default_height": 320,
582 // The default model to use when creating new chats.
583 "default_model": {
584 // The provider to use.
585 "provider": "zed.dev",
586 // The model to use.
587 "model": "claude-3-5-sonnet-latest"
588 }
589 },
590 // The settings for slash commands.
591 "slash_commands": {
592 // Settings for the `/docs` slash command.
593 "docs": {
594 // Whether `/docs` is enabled.
595 "enabled": false
596 },
597 // Settings for the `/project` slash command.
598 "project": {
599 // Whether `/project` is enabled.
600 "enabled": false
601 }
602 },
603 // Whether the screen sharing icon is shown in the os status bar.
604 "show_call_status_icon": true,
605 // Whether to use language servers to provide code intelligence.
606 "enable_language_server": true,
607 // Whether to perform linked edits of associated ranges, if the language server supports it.
608 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
609 "linked_edits": true,
610 // The list of language servers to use (or disable) for all languages.
611 //
612 // This is typically customized on a per-language basis.
613 "language_servers": ["..."],
614 // When to automatically save edited buffers. This setting can
615 // take four values.
616 //
617 // 1. Never automatically save:
618 // "autosave": "off",
619 // 2. Save when changing focus away from the Zed window:
620 // "autosave": "on_window_change",
621 // 3. Save when changing focus away from a specific buffer:
622 // "autosave": "on_focus_change",
623 // 4. Save when idle for a certain amount of time:
624 // "autosave": { "after_delay": {"milliseconds": 500} },
625 "autosave": "off",
626 // Maximum number of tabs per pane. Unset for unlimited.
627 "max_tabs": null,
628 // Settings related to the editor's tab bar.
629 "tab_bar": {
630 // Whether or not to show the tab bar in the editor
631 "show": true,
632 // Whether or not to show the navigation history buttons.
633 "show_nav_history_buttons": true,
634 // Whether or not to show the tab bar buttons.
635 "show_tab_bar_buttons": true
636 },
637 // Settings related to the editor's tabs
638 "tabs": {
639 // Show git status colors in the editor tabs.
640 "git_status": false,
641 // Position of the close button on the editor tabs.
642 "close_position": "right",
643 // Whether to show the file icon for a tab.
644 "file_icons": false,
645 // Whether to always show the close button on tabs.
646 "always_show_close_button": false,
647 // What to do after closing the current tab.
648 //
649 // 1. Activate the tab that was open previously (default)
650 // "history"
651 // 2. Activate the right neighbour tab if present
652 // "neighbour"
653 // 3. Activate the left neighbour tab if present
654 // "left_neighbour"
655 "activate_on_close": "history",
656 // Which files containing diagnostic errors/warnings to mark in the tabs.
657 // Diagnostics are only shown when file icons are also active.
658 // This setting only works when can take the following three values:
659 ///
660 // 1. Do not mark any files:
661 // "off"
662 // 2. Only mark files with errors:
663 // "errors"
664 // 3. Mark files with errors and warnings:
665 // "all"
666 "show_diagnostics": "off"
667 },
668 // Settings related to preview tabs.
669 "preview_tabs": {
670 // Whether preview tabs should be enabled.
671 // Preview tabs allow you to open files in preview mode, where they close automatically
672 // when you switch to another file unless you explicitly pin them.
673 // This is useful for quickly viewing files without cluttering your workspace.
674 "enabled": true,
675 // Whether to open tabs in preview mode when selected from the file finder.
676 "enable_preview_from_file_finder": false,
677 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
678 "enable_preview_from_code_navigation": false
679 },
680 // Settings related to the file finder.
681 "file_finder": {
682 // Whether to show file icons in the file finder.
683 "file_icons": true,
684 // Determines how much space the file finder can take up in relation to the available window width.
685 // There are 5 possible width values:
686 //
687 // 1. Small: This value is essentially a fixed width.
688 // "modal_max_width": "small"
689 // 2. Medium:
690 // "modal_max_width": "medium"
691 // 3. Large:
692 // "modal_max_width": "large"
693 // 4. Extra Large:
694 // "modal_max_width": "xlarge"
695 // 5. Fullscreen: This value removes any horizontal padding, as it consumes the whole viewport width.
696 // "modal_max_width": "full"
697 //
698 // Default: small
699 "modal_max_width": "small"
700 },
701 // Whether or not to remove any trailing whitespace from lines of a buffer
702 // before saving it.
703 "remove_trailing_whitespace_on_save": true,
704 // Whether to start a new line with a comment when a previous line is a comment as well.
705 "extend_comment_on_newline": true,
706 // Whether or not to ensure there's a single newline at the end of a buffer
707 // when saving it.
708 "ensure_final_newline_on_save": true,
709 // Whether or not to perform a buffer format before saving
710 //
711 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
712 "format_on_save": "on",
713 // How to perform a buffer format. This setting can take 4 values:
714 //
715 // 1. Format code using the current language server:
716 // "formatter": "language_server"
717 // 2. Format code using an external command:
718 // "formatter": {
719 // "external": {
720 // "command": "prettier",
721 // "arguments": ["--stdin-filepath", "{buffer_path}"]
722 // }
723 // }
724 // 3. Format code using Zed's Prettier integration:
725 // "formatter": "prettier"
726 // 4. Default. Format files using Zed's Prettier integration (if applicable),
727 // or falling back to formatting via language server:
728 // "formatter": "auto"
729 "formatter": "auto",
730 // How to soft-wrap long lines of text.
731 // Possible values:
732 //
733 // 1. Prefer a single line generally, unless an overly long line is encountered.
734 // "soft_wrap": "none",
735 // "soft_wrap": "prefer_line", // (deprecated, same as "none")
736 // 2. Soft wrap lines that overflow the editor.
737 // "soft_wrap": "editor_width",
738 // 3. Soft wrap lines at the preferred line length.
739 // "soft_wrap": "preferred_line_length",
740 // 4. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
741 // "soft_wrap": "bounded",
742 "soft_wrap": "none",
743 // The column at which to soft-wrap lines, for buffers where soft-wrap
744 // is enabled.
745 "preferred_line_length": 80,
746 // Whether to indent lines using tab characters, as opposed to multiple
747 // spaces.
748 "hard_tabs": false,
749 // How many columns a tab should occupy.
750 "tab_size": 4,
751 // Control what info is collected by Zed.
752 "telemetry": {
753 // Send debug info like crash reports.
754 "diagnostics": true,
755 // Send anonymized usage data like what languages you're using Zed with.
756 "metrics": true
757 },
758 // Automatically update Zed. This setting may be ignored on Linux if
759 // installed through a package manager.
760 "auto_update": true,
761 // Diagnostics configuration.
762 "diagnostics": {
763 // Whether to show warnings or not by default.
764 "include_warnings": true,
765 // Settings for inline diagnostics
766 "inline": {
767 // Whether to show diagnostics inline or not
768 "enabled": false,
769 // The delay in milliseconds to show inline diagnostics after the
770 // last diagnostic update.
771 "update_debounce_ms": 150,
772 // The amount of padding between the end of the source line and the start
773 // of the inline diagnostic in units of em widths.
774 "padding": 4,
775 // The minimum column to display inline diagnostics. This setting can be
776 // used to horizontally align inline diagnostics at some column. Lines
777 // longer than this value will still push diagnostics further to the right.
778 "min_column": 0,
779 // The minimum severity of the diagnostics to show inline.
780 // Shows all diagnostics when not specified.
781 "max_severity": null
782 }
783 },
784 // Files or globs of files that will be excluded by Zed entirely. They will be skipped during file
785 // scans, file searches, and not be displayed in the project file tree. Takes precedence over `file_scan_inclusions`.
786 "file_scan_exclusions": [
787 "**/.git",
788 "**/.svn",
789 "**/.hg",
790 "**/.jj",
791 "**/CVS",
792 "**/.DS_Store",
793 "**/Thumbs.db",
794 "**/.classpath",
795 "**/.settings"
796 ],
797 // Files or globs of files that will be included by Zed, even when ignored by git. This is useful
798 // for files that are not tracked by git, but are still important to your project. Note that globs
799 // that are overly broad can slow down Zed's file scanning. `file_scan_exclusions` takes
800 // precedence over these inclusions.
801 "file_scan_inclusions": [".env*"],
802 // Git gutter behavior configuration.
803 "git": {
804 // Control whether the git gutter is shown. May take 2 values:
805 // 1. Show the gutter
806 // "git_gutter": "tracked_files"
807 // 2. Hide the gutter
808 // "git_gutter": "hide"
809 "git_gutter": "tracked_files",
810 // Control whether the git blame information is shown inline,
811 // in the currently focused line.
812 "inline_blame": {
813 "enabled": true
814 // Sets a delay after which the inline blame information is shown.
815 // Delay is restarted with every cursor movement.
816 // "delay_ms": 600
817 //
818 // Whether or not to display the git commit summary on the same line.
819 // "show_commit_summary": false
820 //
821 // The minimum column number to show the inline blame information at
822 // "min_column": 0
823 }
824 },
825 // Configuration for how direnv configuration should be loaded. May take 2 values:
826 // 1. Load direnv configuration using `direnv export json` directly.
827 // "load_direnv": "direct"
828 // 2. Load direnv configuration through the shell hook, works for POSIX shells and fish.
829 // "load_direnv": "shell_hook"
830 "load_direnv": "direct",
831 "edit_predictions": {
832 // A list of globs representing files that edit predictions should be disabled for.
833 // There's a sensible default list of globs already included.
834 // Any addition to this list will be merged with the default list.
835 // Globs are matched relative to the worktree root,
836 // except when starting with a slash (/) or equivalent in Windows.
837 "disabled_globs": [
838 "**/.env*",
839 "**/*.pem",
840 "**/*.key",
841 "**/*.cert",
842 "**/*.crt",
843 "**/.dev.vars",
844 "**/secrets.yml"
845 ],
846 // When to show edit predictions previews in buffer.
847 // This setting takes two possible values:
848 // 1. Display predictions inline when there are no language server completions available.
849 // "mode": "eager"
850 // 2. Display predictions inline only when holding a modifier key (alt by default).
851 // "mode": "subtle"
852 "mode": "eager",
853 // Whether edit predictions are enabled in the assistant panel.
854 // This setting has no effect if globally disabled.
855 "enabled_in_assistant": true
856 },
857 // Settings specific to journaling
858 "journal": {
859 // The path of the directory where journal entries are stored
860 "path": "~",
861 // What format to display the hours in
862 // May take 2 values:
863 // 1. hour12
864 // 2. hour24
865 "hour_format": "hour12"
866 },
867 // Settings specific to the terminal
868 "terminal": {
869 // What shell to use when opening a terminal. May take 3 values:
870 // 1. Use the system's default terminal configuration in /etc/passwd
871 // "shell": "system"
872 // 2. A program:
873 // "shell": {
874 // "program": "sh"
875 // }
876 // 3. A program with arguments:
877 // "shell": {
878 // "with_arguments": {
879 // "program": "/bin/bash",
880 // "args": ["--login"]
881 // }
882 // }
883 "shell": "system",
884 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
885 "dock": "bottom",
886 // Default width when the terminal is docked to the left or right.
887 "default_width": 640,
888 // Default height when the terminal is docked to the bottom.
889 "default_height": 320,
890 // What working directory to use when launching the terminal.
891 // May take 4 values:
892 // 1. Use the current file's project directory. Will Fallback to the
893 // first project directory strategy if unsuccessful
894 // "working_directory": "current_project_directory"
895 // 2. Use the first project in this workspace's directory
896 // "working_directory": "first_project_directory"
897 // 3. Always use this platform's home directory (if we can find it)
898 // "working_directory": "always_home"
899 // 4. Always use a specific directory. This value will be shell expanded.
900 // If this path is not a valid directory the terminal will default to
901 // this platform's home directory (if we can find it)
902 // "working_directory": {
903 // "always": {
904 // "directory": "~/zed/projects/"
905 // }
906 // }
907 "working_directory": "current_project_directory",
908 // Set the cursor blinking behavior in the terminal.
909 // May take 3 values:
910 // 1. Never blink the cursor, ignoring the terminal mode
911 // "blinking": "off",
912 // 2. Default the cursor blink to off, but allow the terminal to
913 // set blinking
914 // "blinking": "terminal_controlled",
915 // 3. Always blink the cursor, ignoring the terminal mode
916 // "blinking": "on",
917 "blinking": "terminal_controlled",
918 // Default cursor shape for the terminal.
919 // 1. A block that surrounds the following character
920 // "block"
921 // 2. A vertical bar
922 // "bar"
923 // 3. An underline / underscore that runs along the following character
924 // "underline"
925 // 4. A box drawn around the following character
926 // "hollow"
927 //
928 // Default: not set, defaults to "block"
929 "cursor_shape": null,
930 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
931 // Alternate Scroll mode converts mouse scroll events into up / down key
932 // presses when in the alternate screen (e.g. when running applications
933 // like vim or less). The terminal can still set and unset this mode.
934 // May take 2 values:
935 // 1. Default alternate scroll mode to on
936 // "alternate_scroll": "on",
937 // 2. Default alternate scroll mode to off
938 // "alternate_scroll": "off",
939 "alternate_scroll": "off",
940 // Set whether the option key behaves as the meta key.
941 // May take 2 values:
942 // 1. Rely on default platform handling of option key, on macOS
943 // this means generating certain unicode characters
944 // "option_as_meta": false,
945 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
946 // "option_as_meta": true,
947 "option_as_meta": false,
948 // Whether or not selecting text in the terminal will automatically
949 // copy to the system clipboard.
950 "copy_on_select": false,
951 // Whether to show the terminal button in the status bar
952 "button": true,
953 // Any key-value pairs added to this list will be added to the terminal's
954 // environment. Use `:` to separate multiple values.
955 "env": {
956 // "KEY": "value1:value2"
957 },
958 // Set the terminal's line height.
959 // May take 3 values:
960 // 1. Use a line height that's comfortable for reading, 1.618
961 // "line_height": "comfortable"
962 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
963 // particularly if they use box characters
964 // "line_height": "standard",
965 // 3. Use a custom line height.
966 // "line_height": {
967 // "custom": 2
968 // },
969 "line_height": "comfortable",
970 // Activate the python virtual environment, if one is found, in the
971 // terminal's working directory (as resolved by the working_directory
972 // setting). Set this to "off" to disable this behavior.
973 "detect_venv": {
974 "on": {
975 // Default directories to search for virtual environments, relative
976 // to the current working directory. We recommend overriding this
977 // in your project's settings, rather than globally.
978 "directories": [".env", "env", ".venv", "venv"],
979 // Can also be `csh`, `fish`, `nushell` and `power_shell`
980 "activate_script": "default"
981 }
982 },
983 "toolbar": {
984 // Whether to display the terminal title in its toolbar's breadcrumbs.
985 // Only shown if the terminal title is not empty.
986 //
987 // The shell running in the terminal needs to be configured to emit the title.
988 // Example: `echo -e "\e]2;New Title\007";`
989 "breadcrumbs": true
990 },
991 // Scrollbar-related settings
992 "scrollbar": {
993 // When to show the scrollbar in the terminal.
994 // This setting can take five values:
995 ///
996 // 1. null (default): Inherit editor settings
997 // 2. Show the scrollbar if there's important information or
998 // follow the system's configured behavior (default):
999 // "auto"
1000 // 3. Match the system's configured behavior:
1001 // "system"
1002 // 4. Always show the scrollbar:
1003 // "always"
1004 // 5. Never show the scrollbar:
1005 // "never"
1006 "show": null
1007 }
1008 // Set the terminal's font size. If this option is not included,
1009 // the terminal will default to matching the buffer's font size.
1010 // "font_size": 15,
1011 // Set the terminal's font family. If this option is not included,
1012 // the terminal will default to matching the buffer's font family.
1013 // "font_family": "Zed Plex Mono",
1014 // Set the terminal's font fallbacks. If this option is not included,
1015 // the terminal will default to matching the buffer's font fallbacks.
1016 // This will be merged with the platform's default font fallbacks
1017 // "font_fallbacks": ["FiraCode Nerd Fonts"],
1018 // Sets the maximum number of lines in the terminal's scrollback buffer.
1019 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
1020 // Existing terminals will not pick up this change until they are recreated.
1021 // "max_scroll_history_lines": 10000,
1022 },
1023 "code_actions_on_format": {},
1024 // Settings related to running tasks.
1025 "tasks": {
1026 "variables": {}
1027 },
1028 // An object whose keys are language names, and whose values
1029 // are arrays of filenames or extensions of files that should
1030 // use those languages.
1031 //
1032 // For example, to treat files like `foo.notjs` as JavaScript,
1033 // and `Embargo.lock` as TOML:
1034 //
1035 // {
1036 // "JavaScript": ["notjs"],
1037 // "TOML": ["Embargo.lock"]
1038 // }
1039 //
1040 "file_types": {
1041 "Plain Text": ["txt"],
1042 "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "**/.vscode/**/*.json"],
1043 "Shell Script": [".env.*"]
1044 },
1045 // By default use a recent system version of node, or install our own.
1046 // You can override this to use a version of node that is not in $PATH with:
1047 // {
1048 // "node": {
1049 // "path": "/path/to/node"
1050 // "npm_path": "/path/to/npm" (defaults to node_path/../npm)
1051 // }
1052 // }
1053 // or to ensure Zed always downloads and installs an isolated version of node:
1054 // {
1055 // "node": {
1056 // "ignore_system_version": true,
1057 // }
1058 // NOTE: changing this setting currently requires restarting Zed.
1059 "node": {},
1060 // The extensions that Zed should automatically install on startup.
1061 //
1062 // If you don't want any of these extensions, add this field to your settings
1063 // and change the value to `false`.
1064 "auto_install_extensions": {
1065 "html": true
1066 },
1067 // Different settings for specific languages.
1068 "languages": {
1069 "Astro": {
1070 "language_servers": ["astro-language-server", "..."],
1071 "prettier": {
1072 "allowed": true,
1073 "plugins": ["prettier-plugin-astro"]
1074 }
1075 },
1076 "Blade": {
1077 "prettier": {
1078 "allowed": true
1079 }
1080 },
1081 "C": {
1082 "format_on_save": "off",
1083 "use_on_type_format": false,
1084 "prettier": {
1085 "allowed": false
1086 }
1087 },
1088 "C++": {
1089 "format_on_save": "off",
1090 "use_on_type_format": false,
1091 "prettier": {
1092 "allowed": false
1093 }
1094 },
1095 "CSS": {
1096 "prettier": {
1097 "allowed": true
1098 }
1099 },
1100 "Dart": {
1101 "tab_size": 2
1102 },
1103 "Diff": {
1104 "show_edit_predictions": false,
1105 "remove_trailing_whitespace_on_save": false,
1106 "ensure_final_newline_on_save": false
1107 },
1108 "Elixir": {
1109 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1110 },
1111 "Erlang": {
1112 "language_servers": ["erlang-ls", "!elp", "..."]
1113 },
1114 "Git Commit": {
1115 "allow_rewrap": "anywhere"
1116 },
1117 "Go": {
1118 "code_actions_on_format": {
1119 "source.organizeImports": true
1120 }
1121 },
1122 "GraphQL": {
1123 "prettier": {
1124 "allowed": true
1125 }
1126 },
1127 "HEEX": {
1128 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1129 },
1130 "HTML": {
1131 "prettier": {
1132 "allowed": true
1133 }
1134 },
1135 "Java": {
1136 "prettier": {
1137 "allowed": true,
1138 "plugins": ["prettier-plugin-java"]
1139 }
1140 },
1141 "JavaScript": {
1142 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1143 "prettier": {
1144 "allowed": true
1145 }
1146 },
1147 "JSON": {
1148 "prettier": {
1149 "allowed": true
1150 }
1151 },
1152 "JSONC": {
1153 "prettier": {
1154 "allowed": true
1155 }
1156 },
1157 "Markdown": {
1158 "format_on_save": "off",
1159 "use_on_type_format": false,
1160 "allow_rewrap": "anywhere",
1161 "prettier": {
1162 "allowed": true
1163 }
1164 },
1165 "PHP": {
1166 "language_servers": ["phpactor", "!intelephense", "..."],
1167 "prettier": {
1168 "allowed": true,
1169 "plugins": ["@prettier/plugin-php"],
1170 "parser": "php"
1171 }
1172 },
1173 "Plain Text": {
1174 "allow_rewrap": "anywhere"
1175 },
1176 "Ruby": {
1177 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
1178 },
1179 "SCSS": {
1180 "prettier": {
1181 "allowed": true
1182 }
1183 },
1184 "SQL": {
1185 "prettier": {
1186 "allowed": true,
1187 "plugins": ["prettier-plugin-sql"]
1188 }
1189 },
1190 "Starlark": {
1191 "language_servers": ["starpls", "!buck2-lsp", "..."]
1192 },
1193 "Svelte": {
1194 "language_servers": ["svelte-language-server", "..."],
1195 "prettier": {
1196 "allowed": true,
1197 "plugins": ["prettier-plugin-svelte"]
1198 }
1199 },
1200 "TSX": {
1201 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1202 "prettier": {
1203 "allowed": true
1204 }
1205 },
1206 "Twig": {
1207 "prettier": {
1208 "allowed": true
1209 }
1210 },
1211 "TypeScript": {
1212 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1213 "prettier": {
1214 "allowed": true
1215 }
1216 },
1217 "Vue.js": {
1218 "language_servers": ["vue-language-server", "..."],
1219 "prettier": {
1220 "allowed": true
1221 }
1222 },
1223 "XML": {
1224 "prettier": {
1225 "allowed": true,
1226 "plugins": ["@prettier/plugin-xml"]
1227 }
1228 },
1229 "YAML": {
1230 "prettier": {
1231 "allowed": true
1232 }
1233 },
1234 "Zig": {
1235 "language_servers": ["zls", "..."]
1236 }
1237 },
1238 // Different settings for specific language models.
1239 "language_models": {
1240 "anthropic": {
1241 "version": "1",
1242 "api_url": "https://api.anthropic.com"
1243 },
1244 "google": {
1245 "api_url": "https://generativelanguage.googleapis.com"
1246 },
1247 "ollama": {
1248 "api_url": "http://localhost:11434"
1249 },
1250 "openai": {
1251 "version": "1",
1252 "api_url": "https://api.openai.com/v1"
1253 },
1254 "lmstudio": {
1255 "api_url": "http://localhost:1234/api/v0"
1256 },
1257 "deepseek": {
1258 "api_url": "https://api.deepseek.com"
1259 },
1260 "mistral": {
1261 "api_url": "https://api.mistral.ai/v1"
1262 }
1263 },
1264 // Zed's Prettier integration settings.
1265 // Allows to enable/disable formatting with Prettier
1266 // and configure default Prettier, used when no project-level Prettier installation is found.
1267 "prettier": {
1268 // // Whether to consider prettier formatter or not when attempting to format a file.
1269 // "allowed": false,
1270 //
1271 // // Use regular Prettier json configuration.
1272 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1273 // // the project has no other Prettier installed.
1274 // "plugins": [],
1275 //
1276 // // Use regular Prettier json configuration.
1277 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1278 // // the project has no other Prettier installed.
1279 // "trailingComma": "es5",
1280 // "tabWidth": 4,
1281 // "semi": false,
1282 // "singleQuote": true
1283 },
1284 // LSP Specific settings.
1285 "lsp": {
1286 // Specify the LSP name as a key here.
1287 // "rust-analyzer": {
1288 // // These initialization options are merged into Zed's defaults
1289 // "initialization_options": {
1290 // "check": {
1291 // "command": "clippy" // rust-analyzer.check.command (default: "check")
1292 // }
1293 // }
1294 // }
1295 },
1296 // Jupyter settings
1297 "jupyter": {
1298 "enabled": true
1299 // Specify the language name as the key and the kernel name as the value.
1300 // "kernel_selections": {
1301 // "python": "conda-base"
1302 // "typescript": "deno"
1303 // }
1304 },
1305 // Vim settings
1306 "vim": {
1307 "default_mode": "normal",
1308 "toggle_relative_line_numbers": false,
1309 "use_system_clipboard": "always",
1310 "use_multiline_find": false,
1311 "use_smartcase_find": false,
1312 "highlight_on_yank_duration": 200,
1313 "custom_digraphs": {}
1314 },
1315 // The server to connect to. If the environment variable
1316 // ZED_SERVER_URL is set, it will override this setting.
1317 "server_url": "https://zed.dev",
1318 // Settings overrides to use when using Zed Preview.
1319 // Mostly useful for developers who are managing multiple instances of Zed.
1320 "preview": {
1321 // "theme": "Andromeda"
1322 },
1323 // Settings overrides to use when using Zed Nightly.
1324 // Mostly useful for developers who are managing multiple instances of Zed.
1325 "nightly": {
1326 // "theme": "Andromeda"
1327 },
1328 // Settings overrides to use when using Zed Stable.
1329 // Mostly useful for developers who are managing multiple instances of Zed.
1330 "stable": {
1331 // "theme": "Andromeda"
1332 },
1333 // Settings overrides to use when using Zed Dev.
1334 // Mostly useful for developers who are managing multiple instances of Zed.
1335 "dev": {
1336 // "theme": "Andromeda"
1337 },
1338 // Task-related settings.
1339 "task": {
1340 // Whether to show task status indicator in the status bar. Default: true
1341 "show_status_indicator": true
1342 },
1343 // Whether to show full labels in line indicator or short ones
1344 //
1345 // Values:
1346 // - `short`: "2 s, 15 l, 32 c"
1347 // - `long`: "2 selections, 15 lines, 32 characters"
1348 // Default: long
1349 "line_indicator_format": "long",
1350 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1351 //
1352 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1353 // `socks5h`. `http` will be used when no scheme is specified.
1354 //
1355 // By default no proxy will be used, or Zed will try get proxy settings from
1356 // environment variables.
1357 //
1358 // Examples:
1359 // - "proxy": "socks5h://localhost:10808"
1360 // - "proxy": "http://127.0.0.1:10809"
1361 "proxy": null,
1362 // Set to configure aliases for the command palette.
1363 // When typing a query which is a key of this object, the value will be used instead.
1364 //
1365 // Examples:
1366 // {
1367 // "W": "workspace::Save"
1368 // }
1369 "command_aliases": {},
1370 // Whether to show user picture in titlebar.
1371 "show_user_picture": true,
1372 // ssh_connections is an array of ssh connections.
1373 // You can configure these from `project: Open Remote` in the command palette.
1374 // Zed's ssh support will pull configuration from your ~/.ssh too.
1375 // Examples:
1376 // [
1377 // {
1378 // "host": "example-box",
1379 // // "port": 22, "username": "test", "args": ["-i", "/home/user/.ssh/id_rsa"]
1380 // "projects": [
1381 // {
1382 // "paths": ["/home/user/code/zed"]
1383 // }
1384 // ]
1385 // }
1386 // ]
1387 "ssh_connections": [],
1388 // Configures context servers for use in the Assistant.
1389 "context_servers": {}
1390}