1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 // The name of a base set of key bindings to use.
14 // This setting can take four values, each named after another
15 // text editor:
16 //
17 // 1. "VSCode"
18 // 2. "JetBrains"
19 // 3. "SublimeText"
20 // 4. "Atom"
21 "base_keymap": "VSCode",
22 // Features that can be globally enabled or disabled
23 "features": {
24 // Which inline completion provider to use.
25 "inline_completion_provider": "copilot"
26 },
27 // The name of a font to use for rendering text in the editor
28 "buffer_font_family": "Zed Plex Mono",
29 // Set the buffer text's font fallbacks, this will be merged with
30 // the platform's default fallbacks.
31 "buffer_font_fallbacks": [],
32 // The OpenType features to enable for text in the editor.
33 "buffer_font_features": {
34 // Disable ligatures:
35 // "calt": false
36 },
37 // The default font size for text in the editor
38 "buffer_font_size": 15,
39 // The weight of the editor font in standard CSS units from 100 to 900.
40 "buffer_font_weight": 400,
41 // Set the buffer's line height.
42 // May take 3 values:
43 // 1. Use a line height that's comfortable for reading (1.618)
44 // "buffer_line_height": "comfortable"
45 // 2. Use a standard line height, (1.3)
46 // "buffer_line_height": "standard",
47 // 3. Use a custom line height
48 // "buffer_line_height": {
49 // "custom": 2
50 // },
51 "buffer_line_height": "comfortable",
52 // The name of a font to use for rendering text in the UI
53 // You can set this to ".SystemUIFont" to use the system font
54 "ui_font_family": "Zed Plex Sans",
55 // Set the UI's font fallbacks, this will be merged with the platform's
56 // default font fallbacks.
57 "ui_font_fallbacks": [],
58 // The OpenType features to enable for text in the UI
59 "ui_font_features": {
60 // Disable ligatures:
61 "calt": false
62 },
63 // The weight of the UI font in standard CSS units from 100 to 900.
64 "ui_font_weight": 400,
65 // The default font size for text in the UI
66 "ui_font_size": 16,
67 // The factor to grow the active pane by. Defaults to 1.0
68 // which gives the same size as all other panes.
69 "active_pane_magnification": 1.0,
70 // Centered layout related settings.
71 "centered_layout": {
72 // The relative width of the left padding of the central pane from the
73 // workspace when the centered layout is used.
74 "left_padding": 0.2,
75 // The relative width of the right padding of the central pane from the
76 // workspace when the centered layout is used.
77 "right_padding": 0.2
78 },
79 // The key to use for adding multiple cursors
80 // Currently "alt" or "cmd_or_ctrl" (also aliased as
81 // "cmd" and "ctrl") are supported.
82 "multi_cursor_modifier": "alt",
83 // Whether to enable vim modes and key bindings.
84 "vim_mode": false,
85 // Whether to show the informational hover box when moving the mouse
86 // over symbols in the editor.
87 "hover_popover_enabled": true,
88 // Whether to confirm before quitting Zed.
89 "confirm_quit": false,
90 // Whether to restore last closed project when fresh Zed instance is opened.
91 "restore_on_startup": "last_session",
92 // Size of the drop target in the editor.
93 "drop_target_size": 0.2,
94 // Whether the window should be closed when using 'close active item' on a window with no tabs.
95 // May take 3 values:
96 // 1. Use the current platform's convention
97 // "when_closing_with_no_tabs": "platform_default"
98 // 2. Always close the window:
99 // "when_closing_with_no_tabs": "close_window",
100 // 3. Never close the window
101 // "when_closing_with_no_tabs": "keep_window_open",
102 "when_closing_with_no_tabs": "platform_default",
103 // Whether to use the system provided dialogs for Open and Save As.
104 // When set to false, Zed will use the built-in keyboard-first pickers.
105 "use_system_path_prompts": true,
106 // Whether the cursor blinks in the editor.
107 "cursor_blink": true,
108 // How to highlight the current line in the editor.
109 //
110 // 1. Don't highlight the current line:
111 // "none"
112 // 2. Highlight the gutter area:
113 // "gutter"
114 // 3. Highlight the editor area:
115 // "line"
116 // 4. Highlight the full line (default):
117 // "all"
118 "current_line_highlight": "all",
119 // Whether to pop the completions menu while typing in an editor without
120 // explicitly requesting it.
121 "show_completions_on_input": true,
122 // Whether to display inline and alongside documentation for items in the
123 // completions menu
124 "show_completion_documentation": true,
125 // The debounce delay before re-querying the language server for completion
126 // documentation when not included in original completion list.
127 "completion_documentation_secondary_query_debounce": 300,
128 // Show method signatures in the editor, when inside parentheses.
129 "auto_signature_help": false,
130 /// Whether to show the signature help after completion or a bracket pair inserted.
131 /// If `auto_signature_help` is enabled, this setting will be treated as enabled also.
132 "show_signature_help_after_edits": true,
133 // Whether to show wrap guides (vertical rulers) in the editor.
134 // Setting this to true will show a guide at the 'preferred_line_length' value
135 // if softwrap is set to 'preferred_line_length', and will show any
136 // additional guides as specified by the 'wrap_guides' setting.
137 "show_wrap_guides": true,
138 // Character counts at which to show wrap guides in the editor.
139 "wrap_guides": [],
140 // Hide the values of in variables from visual display in private files
141 "redact_private_values": false,
142 // The default number of lines to expand excerpts in the multibuffer by.
143 "expand_excerpt_lines": 3,
144 // Globs to match against file paths to determine if a file is private.
145 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
146 // Whether to use additional LSP queries to format (and amend) the code after
147 // every "trigger" symbol input, defined by LSP server capabilities.
148 "use_on_type_format": true,
149 // Whether to automatically add matching closing characters when typing
150 // opening parenthesis, bracket, brace, single or double quote characters.
151 // For example, when you type (, Zed will add a closing ) at the correct position.
152 "use_autoclose": true,
153 // Whether to automatically surround selected text when typing opening parenthesis,
154 // bracket, brace, single or double quote characters.
155 // For example, when you select text and type (, Zed will surround the text with ().
156 "use_auto_surround": true,
157 // Controls how the editor handles the autoclosed characters.
158 // When set to `false`(default), skipping over and auto-removing of the closing characters
159 // happen only for auto-inserted characters.
160 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
161 // no matter how they were inserted.
162 "always_treat_brackets_as_autoclosed": false,
163 // Controls whether inline completions are shown immediately (true)
164 // or manually by triggering `editor::ShowInlineCompletion` (false).
165 "show_inline_completions": true,
166 // Whether to show tabs and spaces in the editor.
167 // This setting can take three values:
168 //
169 // 1. Draw tabs and spaces only for the selected text (default):
170 // "selection"
171 // 2. Do not draw any tabs or spaces:
172 // "none"
173 // 3. Draw all invisible symbols:
174 // "all"
175 // 4. Draw whitespaces at boundaries only:
176 // "boundary"
177 // For a whitespace to be on a boundary, any of the following conditions need to be met:
178 // - It is a tab
179 // - It is adjacent to an edge (start or end)
180 // - It is adjacent to a whitespace (left or right)
181 "show_whitespaces": "selection",
182 // Settings related to calls in Zed
183 "calls": {
184 // Join calls with the microphone live by default
185 "mute_on_join": false,
186 // Share your project when you are the first to join a channel
187 "share_on_join": false
188 },
189 // Toolbar related settings
190 "toolbar": {
191 // Whether to show breadcrumbs.
192 "breadcrumbs": true,
193 // Whether to show quick action buttons.
194 "quick_actions": true,
195 // Whether to show the Selections menu in the editor toolbar
196 "selections_menu": true
197 },
198 // Scrollbar related settings
199 "scrollbar": {
200 // When to show the scrollbar in the editor.
201 // This setting can take four values:
202 //
203 // 1. Show the scrollbar if there's important information or
204 // follow the system's configured behavior (default):
205 // "auto"
206 // 2. Match the system's configured behavior:
207 // "system"
208 // 3. Always show the scrollbar:
209 // "always"
210 // 4. Never show the scrollbar:
211 // "never"
212 "show": "auto",
213 // Whether to show cursor positions in the scrollbar.
214 "cursors": true,
215 // Whether to show git diff indicators in the scrollbar.
216 "git_diff": true,
217 // Whether to show buffer search results in the scrollbar.
218 "search_results": true,
219 // Whether to show selected symbol occurrences in the scrollbar.
220 "selected_symbol": true,
221 // Whether to show diagnostic indicators in the scrollbar.
222 "diagnostics": true
223 },
224 // What to do when multibuffer is double clicked in some of its excerpts
225 // (parts of singleton buffers).
226 // May take 2 values:
227 // 1. Behave as a regular buffer and select the whole word (default).
228 // "double_click_in_multibuffer": "select"
229 // 2. Open the excerpt clicked as a new buffer in the new tab.
230 // "double_click_in_multibuffer": "open",
231 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
232 "double_click_in_multibuffer": "select",
233 "gutter": {
234 // Whether to show line numbers in the gutter.
235 "line_numbers": true,
236 // Whether to show code action buttons in the gutter.
237 "code_actions": true,
238 // Whether to show runnables buttons in the gutter.
239 "runnables": true,
240 // Whether to show fold buttons in the gutter.
241 "folds": true
242 },
243 "indent_guides": {
244 /// Whether to show indent guides in the editor.
245 "enabled": true,
246 /// The width of the indent guides in pixels, between 1 and 10.
247 "line_width": 1,
248 /// The width of the active indent guide in pixels, between 1 and 10.
249 "active_line_width": 1,
250 /// Determines how indent guides are colored.
251 /// This setting can take the following three values:
252 ///
253 /// 1. "disabled"
254 /// 2. "fixed"
255 /// 3. "indent_aware"
256 "coloring": "fixed",
257 /// Determines how indent guide backgrounds are colored.
258 /// This setting can take the following two values:
259 ///
260 /// 1. "disabled"
261 /// 2. "indent_aware"
262 "background_coloring": "disabled"
263 },
264 // Whether the editor will scroll beyond the last line.
265 "scroll_beyond_last_line": "one_page",
266 // The number of lines to keep above/below the cursor when scrolling.
267 "vertical_scroll_margin": 3,
268 // Scroll sensitivity multiplier. This multiplier is applied
269 // to both the horizontal and vertical delta values while scrolling.
270 "scroll_sensitivity": 1.0,
271 "relative_line_numbers": false,
272 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
273 "search_wrap": true,
274 // When to populate a new search's query based on the text under the cursor.
275 // This setting can take the following three values:
276 //
277 // 1. Always populate the search query with the word under the cursor (default).
278 // "always"
279 // 2. Only populate the search query when there is text selected
280 // "selection"
281 // 3. Never populate the search query
282 // "never"
283 "seed_search_query_from_cursor": "always",
284 // Inlay hint related settings
285 "inlay_hints": {
286 // Global switch to toggle hints on and off, switched off by default.
287 "enabled": false,
288 // Toggle certain types of hints on and off, all switched on by default.
289 "show_type_hints": true,
290 "show_parameter_hints": true,
291 // Corresponds to null/None LSP hint type value.
292 "show_other_hints": true,
293 // Time to wait after editing the buffer, before requesting the hints,
294 // set to 0 to disable debouncing.
295 "edit_debounce_ms": 700,
296 // Time to wait after scrolling the buffer, before requesting the hints,
297 // set to 0 to disable debouncing.
298 "scroll_debounce_ms": 50
299 },
300 "project_panel": {
301 // Whether to show the project panel button in the status bar
302 "button": true,
303 // Default width of the project panel.
304 "default_width": 240,
305 // Where to dock the project panel. Can be 'left' or 'right'.
306 "dock": "left",
307 // Whether to show file icons in the project panel.
308 "file_icons": true,
309 // Whether to show folder icons or chevrons for directories in the project panel.
310 "folder_icons": true,
311 // Whether to show the git status in the project panel.
312 "git_status": true,
313 // Amount of indentation for nested items.
314 "indent_size": 20,
315 // Whether to reveal it in the project panel automatically,
316 // when a corresponding project entry becomes active.
317 // Gitignored entries are never auto revealed.
318 "auto_reveal_entries": true,
319 // Whether to fold directories automatically and show compact folders
320 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
321 "auto_fold_dirs": true,
322 /// Scrollbar-related settings
323 "scrollbar": {
324 /// When to show the scrollbar in the project panel.
325 ///
326 /// Default: always
327 "show": "always"
328 }
329 },
330 "outline_panel": {
331 // Whether to show the outline panel button in the status bar
332 "button": true,
333 // Default width of the outline panel.
334 "default_width": 300,
335 // Where to dock the outline panel. Can be 'left' or 'right'.
336 "dock": "left",
337 // Whether to show file icons in the outline panel.
338 "file_icons": true,
339 // Whether to show folder icons or chevrons for directories in the outline panel.
340 "folder_icons": true,
341 // Whether to show the git status in the outline panel.
342 "git_status": true,
343 // Amount of indentation for nested items.
344 "indent_size": 20,
345 // Whether to reveal it in the outline panel automatically,
346 // when a corresponding outline entry becomes active.
347 // Gitignored entries are never auto revealed.
348 "auto_reveal_entries": true,
349 /// Whether to fold directories automatically
350 /// when a directory has only one directory inside.
351 "auto_fold_dirs": true
352 },
353 "collaboration_panel": {
354 // Whether to show the collaboration panel button in the status bar.
355 "button": true,
356 // Where to dock the collaboration panel. Can be 'left' or 'right'.
357 "dock": "left",
358 // Default width of the collaboration panel.
359 "default_width": 240
360 },
361 "chat_panel": {
362 // Whether to show the chat panel button in the status bar.
363 "button": true,
364 // Where to the chat panel. Can be 'left' or 'right'.
365 "dock": "right",
366 // Default width of the chat panel.
367 "default_width": 240
368 },
369 "message_editor": {
370 // Whether to automatically replace emoji shortcodes with emoji characters.
371 // For example: typing `:wave:` gets replaced with `👋`.
372 "auto_replace_emoji_shortcode": true
373 },
374 "notification_panel": {
375 // Whether to show the notification panel button in the status bar.
376 "button": true,
377 // Where to dock the notification panel. Can be 'left' or 'right'.
378 "dock": "right",
379 // Default width of the notification panel.
380 "default_width": 380
381 },
382 "assistant": {
383 // Version of this setting.
384 "version": "2",
385 // Whether the assistant is enabled.
386 "enabled": true,
387 // Whether to show the assistant panel button in the status bar.
388 "button": true,
389 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
390 "dock": "right",
391 // Default width when the assistant is docked to the left or right.
392 "default_width": 640,
393 // Default height when the assistant is docked to the bottom.
394 "default_height": 320,
395 // The default model to use when creating new contexts.
396 "default_model": {
397 // The provider to use.
398 "provider": "zed.dev",
399 // The model to use.
400 "model": "claude-3-5-sonnet"
401 }
402 },
403 // The settings for slash commands.
404 "slash_commands": {
405 // Settings for the `/docs` slash command.
406 "docs": {
407 // Whether `/docs` is enabled.
408 "enabled": false
409 },
410 // Settings for the `/project` slash command.
411 "project": {
412 // Whether `/project` is enabled.
413 "enabled": false
414 }
415 },
416 // Whether the screen sharing icon is shown in the os status bar.
417 "show_call_status_icon": true,
418 // Whether to use language servers to provide code intelligence.
419 "enable_language_server": true,
420 // Whether to perform linked edits of associated ranges, if the language server supports it.
421 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
422 "linked_edits": true,
423 // The list of language servers to use (or disable) for all languages.
424 //
425 // This is typically customized on a per-language basis.
426 "language_servers": ["..."],
427 // When to automatically save edited buffers. This setting can
428 // take four values.
429 //
430 // 1. Never automatically save:
431 // "autosave": "off",
432 // 2. Save when changing focus away from the Zed window:
433 // "autosave": "on_window_change",
434 // 3. Save when changing focus away from a specific buffer:
435 // "autosave": "on_focus_change",
436 // 4. Save when idle for a certain amount of time:
437 // "autosave": { "after_delay": {"milliseconds": 500} },
438 "autosave": "off",
439 // Settings related to the editor's tab bar.
440 "tab_bar": {
441 // Whether or not to show the tab bar in the editor
442 "show": true,
443 // Whether or not to show the navigation history buttons.
444 "show_nav_history_buttons": true
445 },
446 // Settings related to the editor's tabs
447 "tabs": {
448 // Show git status colors in the editor tabs.
449 "git_status": false,
450 // Position of the close button on the editor tabs.
451 "close_position": "right",
452 // Whether to show the file icon for a tab.
453 "file_icons": false
454 },
455 // Settings related to preview tabs.
456 "preview_tabs": {
457 // Whether preview tabs should be enabled.
458 // Preview tabs allow you to open files in preview mode, where they close automatically
459 // when you switch to another file unless you explicitly pin them.
460 // This is useful for quickly viewing files without cluttering your workspace.
461 "enabled": true,
462 // Whether to open tabs in preview mode when selected from the file finder.
463 "enable_preview_from_file_finder": false,
464 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
465 "enable_preview_from_code_navigation": false
466 },
467 // Whether or not to remove any trailing whitespace from lines of a buffer
468 // before saving it.
469 "remove_trailing_whitespace_on_save": true,
470 // Whether to start a new line with a comment when a previous line is a comment as well.
471 "extend_comment_on_newline": true,
472 // Whether or not to ensure there's a single newline at the end of a buffer
473 // when saving it.
474 "ensure_final_newline_on_save": true,
475 // Whether or not to perform a buffer format before saving
476 //
477 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
478 "format_on_save": "on",
479 // How to perform a buffer format. This setting can take 4 values:
480 //
481 // 1. Format code using the current language server:
482 // "formatter": "language_server"
483 // 2. Format code using an external command:
484 // "formatter": {
485 // "external": {
486 // "command": "prettier",
487 // "arguments": ["--stdin-filepath", "{buffer_path}"]
488 // }
489 // }
490 // 3. Format code using Zed's Prettier integration:
491 // "formatter": "prettier"
492 // 4. Default. Format files using Zed's Prettier integration (if applicable),
493 // or falling back to formatting via language server:
494 // "formatter": "auto"
495 "formatter": "auto",
496 // How to soft-wrap long lines of text.
497 // Possible values:
498 //
499 // 1. Do not soft wrap.
500 // "soft_wrap": "none",
501 // 2. Prefer a single line generally, unless an overly long line is encountered.
502 // "soft_wrap": "prefer_line",
503 // 3. Soft wrap lines that overflow the editor.
504 // "soft_wrap": "editor_width",
505 // 4. Soft wrap lines at the preferred line length.
506 // "soft_wrap": "preferred_line_length",
507 "soft_wrap": "prefer_line",
508 // The column at which to soft-wrap lines, for buffers where soft-wrap
509 // is enabled.
510 "preferred_line_length": 80,
511 // Whether to indent lines using tab characters, as opposed to multiple
512 // spaces.
513 "hard_tabs": false,
514 // How many columns a tab should occupy.
515 "tab_size": 4,
516 // Control what info is collected by Zed.
517 "telemetry": {
518 // Send debug info like crash reports.
519 "diagnostics": true,
520 // Send anonymized usage data like what languages you're using Zed with.
521 "metrics": true
522 },
523 // Automatically update Zed. This setting may be ignored on Linux if
524 // installed through a package manager.
525 "auto_update": true,
526 // Diagnostics configuration.
527 "diagnostics": {
528 // Whether to show warnings or not by default.
529 "include_warnings": true
530 },
531 // Add files or globs of files that will be excluded by Zed entirely:
532 // they will be skipped during FS scan(s), file tree and file search
533 // will lack the corresponding file entries.
534 "file_scan_exclusions": [
535 "**/.git",
536 "**/.svn",
537 "**/.hg",
538 "**/CVS",
539 "**/.DS_Store",
540 "**/Thumbs.db",
541 "**/.classpath",
542 "**/.settings"
543 ],
544 // Git gutter behavior configuration.
545 "git": {
546 // Control whether the git gutter is shown. May take 2 values:
547 // 1. Show the gutter
548 // "git_gutter": "tracked_files"
549 // 2. Hide the gutter
550 // "git_gutter": "hide"
551 "git_gutter": "tracked_files",
552 // Control whether the git blame information is shown inline,
553 // in the currently focused line.
554 "inline_blame": {
555 "enabled": true
556 // Sets a delay after which the inline blame information is shown.
557 // Delay is restarted with every cursor movement.
558 // "delay_ms": 600
559 }
560 },
561 // Configuration for how direnv configuration should be loaded. May take 2 values:
562 // 1. Load direnv configuration through the shell hook, works for POSIX shells and fish.
563 // "load_direnv": "shell_hook"
564 // 2. Load direnv configuration using `direnv export json` directly.
565 // This can help with some shells that otherwise would not detect
566 // the direnv environment, such as nushell or elvish.
567 // "load_direnv": "direct"
568 "load_direnv": "shell_hook",
569 "inline_completions": {
570 // A list of globs representing files that inline completions should be disabled for.
571 "disabled_globs": [".env"]
572 },
573 // Settings specific to journaling
574 "journal": {
575 // The path of the directory where journal entries are stored
576 "path": "~",
577 // What format to display the hours in
578 // May take 2 values:
579 // 1. hour12
580 // 2. hour24
581 "hour_format": "hour12"
582 },
583 // Settings specific to the terminal
584 "terminal": {
585 // What shell to use when opening a terminal. May take 3 values:
586 // 1. Use the system's default terminal configuration in /etc/passwd
587 // "shell": "system"
588 // 2. A program:
589 // "shell": {
590 // "program": "sh"
591 // }
592 // 3. A program with arguments:
593 // "shell": {
594 // "with_arguments": {
595 // "program": "/bin/bash",
596 // "arguments": ["--login"]
597 // }
598 // }
599 "shell": "system",
600 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
601 "dock": "bottom",
602 // Default width when the terminal is docked to the left or right.
603 "default_width": 640,
604 // Default height when the terminal is docked to the bottom.
605 "default_height": 320,
606 // What working directory to use when launching the terminal.
607 // May take 4 values:
608 // 1. Use the current file's project directory. Will Fallback to the
609 // first project directory strategy if unsuccessful
610 // "working_directory": "current_project_directory"
611 // 2. Use the first project in this workspace's directory
612 // "working_directory": "first_project_directory"
613 // 3. Always use this platform's home directory (if we can find it)
614 // "working_directory": "always_home"
615 // 4. Always use a specific directory. This value will be shell expanded.
616 // If this path is not a valid directory the terminal will default to
617 // this platform's home directory (if we can find it)
618 // "working_directory": {
619 // "always": {
620 // "directory": "~/zed/projects/"
621 // }
622 // }
623 "working_directory": "current_project_directory",
624 // Set the cursor blinking behavior in the terminal.
625 // May take 3 values:
626 // 1. Never blink the cursor, ignoring the terminal mode
627 // "blinking": "off",
628 // 2. Default the cursor blink to off, but allow the terminal to
629 // set blinking
630 // "blinking": "terminal_controlled",
631 // 3. Always blink the cursor, ignoring the terminal mode
632 // "blinking": "on",
633 "blinking": "terminal_controlled",
634 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
635 // Alternate Scroll mode converts mouse scroll events into up / down key
636 // presses when in the alternate screen (e.g. when running applications
637 // like vim or less). The terminal can still set and unset this mode.
638 // May take 2 values:
639 // 1. Default alternate scroll mode to on
640 // "alternate_scroll": "on",
641 // 2. Default alternate scroll mode to off
642 // "alternate_scroll": "off",
643 "alternate_scroll": "off",
644 // Set whether the option key behaves as the meta key.
645 // May take 2 values:
646 // 1. Rely on default platform handling of option key, on macOS
647 // this means generating certain unicode characters
648 // "option_to_meta": false,
649 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
650 // "option_to_meta": true,
651 "option_as_meta": true,
652 // Whether or not selecting text in the terminal will automatically
653 // copy to the system clipboard.
654 "copy_on_select": false,
655 // Whether to show the terminal button in the status bar
656 "button": true,
657 // Any key-value pairs added to this list will be added to the terminal's
658 // environment. Use `:` to separate multiple values.
659 "env": {
660 // "KEY": "value1:value2"
661 },
662 // Set the terminal's line height.
663 // May take 3 values:
664 // 1. Use a line height that's comfortable for reading, 1.618
665 // "line_height": "comfortable"
666 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
667 // particularly if they use box characters
668 // "line_height": "standard",
669 // 3. Use a custom line height.
670 // "line_height": {
671 // "custom": 2
672 // },
673 "line_height": "comfortable",
674 // Activate the python virtual environment, if one is found, in the
675 // terminal's working directory (as resolved by the working_directory
676 // setting). Set this to "off" to disable this behavior.
677 "detect_venv": {
678 "on": {
679 // Default directories to search for virtual environments, relative
680 // to the current working directory. We recommend overriding this
681 // in your project's settings, rather than globally.
682 "directories": [".env", "env", ".venv", "venv"],
683 // Can also be `csh`, `fish`, and `nushell`
684 "activate_script": "default"
685 }
686 },
687 "toolbar": {
688 // Whether to display the terminal title in its toolbar.
689 "title": true
690 }
691 // Set the terminal's font size. If this option is not included,
692 // the terminal will default to matching the buffer's font size.
693 // "font_size": 15,
694 // Set the terminal's font family. If this option is not included,
695 // the terminal will default to matching the buffer's font family.
696 // "font_family": "Zed Plex Mono",
697 // Set the terminal's font fallbacks. If this option is not included,
698 // the terminal will default to matching the buffer's font fallbacks.
699 // This will be merged with the platform's default font fallbacks
700 // "font_fallbacks": ["FiraCode Nerd Fonts"],
701 // Sets the maximum number of lines in the terminal's scrollback buffer.
702 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
703 // Existing terminals will not pick up this change until they are recreated.
704 // "max_scroll_history_lines": 10000,
705 },
706 "code_actions_on_format": {},
707 /// Settings related to running tasks.
708 "tasks": {
709 "variables": {}
710 },
711 // An object whose keys are language names, and whose values
712 // are arrays of filenames or extensions of files that should
713 // use those languages.
714 //
715 // For example, to treat files like `foo.notjs` as JavaScript,
716 // and `Embargo.lock` as TOML:
717 //
718 // {
719 // "JavaScript": ["notjs"],
720 // "TOML": ["Embargo.lock"]
721 // }
722 //
723 "file_types": {
724 "JSON": ["flake.lock"],
725 "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "tsconfig.json"]
726 },
727 // The extensions that Zed should automatically install on startup.
728 //
729 // If you don't want any of these extensions, add this field to your settings
730 // and change the value to `false`.
731 "auto_install_extensions": {
732 "html": true
733 },
734 // Different settings for specific languages.
735 "languages": {
736 "Astro": {
737 "prettier": {
738 "allowed": true,
739 "plugins": ["prettier-plugin-astro"]
740 }
741 },
742 "Blade": {
743 "prettier": {
744 "allowed": true
745 }
746 },
747 "C": {
748 "format_on_save": "off",
749 "use_on_type_format": false
750 },
751 "C++": {
752 "format_on_save": "off",
753 "use_on_type_format": false
754 },
755 "CSS": {
756 "prettier": {
757 "allowed": true
758 }
759 },
760 "Elixir": {
761 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
762 },
763 "Erlang": {
764 "language_servers": ["erlang-ls", "!elp", "..."]
765 },
766 "Go": {
767 "code_actions_on_format": {
768 "source.organizeImports": true
769 }
770 },
771 "GraphQL": {
772 "prettier": {
773 "allowed": true
774 }
775 },
776 "HEEX": {
777 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
778 },
779 "HTML": {
780 "prettier": {
781 "allowed": true
782 }
783 },
784 "Java": {
785 "prettier": {
786 "allowed": true,
787 "plugins": ["prettier-plugin-java"]
788 }
789 },
790 "JavaScript": {
791 "language_servers": ["!typescript-language-server", "vtsls", "..."],
792 "prettier": {
793 "allowed": true
794 }
795 },
796 "JSON": {
797 "prettier": {
798 "allowed": true
799 }
800 },
801 "JSONC": {
802 "prettier": {
803 "allowed": true
804 }
805 },
806 "Markdown": {
807 "format_on_save": "off",
808 "use_on_type_format": false,
809 "prettier": {
810 "allowed": true
811 }
812 },
813 "PHP": {
814 "language_servers": ["phpactor", "!intelephense", "..."],
815 "prettier": {
816 "allowed": true,
817 "plugins": ["@prettier/plugin-php"],
818 "parser": "php"
819 }
820 },
821 "Ruby": {
822 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
823 },
824 "SCSS": {
825 "prettier": {
826 "allowed": true
827 }
828 },
829 "SQL": {
830 "prettier": {
831 "allowed": true,
832 "plugins": ["prettier-plugin-sql"]
833 }
834 },
835 "Starlark": {
836 "language_servers": ["starpls", "!buck2-lsp", "..."]
837 },
838 "Svelte": {
839 "language_servers": ["svelte-language-server", "..."],
840 "prettier": {
841 "allowed": true,
842 "plugins": ["prettier-plugin-svelte"]
843 }
844 },
845 "TSX": {
846 "language_servers": ["!typescript-language-server", "vtsls", "..."],
847 "prettier": {
848 "allowed": true
849 }
850 },
851 "Twig": {
852 "prettier": {
853 "allowed": true
854 }
855 },
856 "TypeScript": {
857 "language_servers": ["!typescript-language-server", "vtsls", "..."],
858 "prettier": {
859 "allowed": true
860 }
861 },
862 "Vue.js": {
863 "language_servers": ["vue-language-server", "..."],
864 "prettier": {
865 "allowed": true
866 }
867 },
868 "XML": {
869 "prettier": {
870 "allowed": true,
871 "plugins": ["@prettier/plugin-xml"]
872 }
873 },
874 "YAML": {
875 "prettier": {
876 "allowed": true
877 }
878 }
879 },
880 // Different settings for specific language models.
881 "language_models": {
882 "anthropic": {
883 "version": "1",
884 "api_url": "https://api.anthropic.com"
885 },
886 "google": {
887 "api_url": "https://generativelanguage.googleapis.com"
888 },
889 "ollama": {
890 "api_url": "http://localhost:11434"
891 },
892 "openai": {
893 "version": "1",
894 "api_url": "https://api.openai.com/v1"
895 }
896 },
897 // Zed's Prettier integration settings.
898 // Allows to enable/disable formatting with Prettier
899 // and configure default Prettier, used when no project-level Prettier installation is found.
900 "prettier": {
901 // // Whether to consider prettier formatter or not when attempting to format a file.
902 // "allowed": false,
903 //
904 // // Use regular Prettier json configuration.
905 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
906 // // the project has no other Prettier installed.
907 // "plugins": [],
908 //
909 // // Use regular Prettier json configuration.
910 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
911 // // the project has no other Prettier installed.
912 // "trailingComma": "es5",
913 // "tabWidth": 4,
914 // "semi": false,
915 // "singleQuote": true
916 },
917 // LSP Specific settings.
918 "lsp": {
919 // Specify the LSP name as a key here.
920 // "rust-analyzer": {
921 // // These initialization options are merged into Zed's defaults
922 // "initialization_options": {
923 // "check": {
924 // "command": "clippy" // rust-analyzer.check.command (default: "check")
925 // }
926 // }
927 // }
928 },
929 // Jupyter settings
930 "jupyter": {
931 "enabled": true
932 // Specify the language name as the key and the kernel name as the value.
933 // "kernel_selections": {
934 // "python": "conda-base"
935 // "typescript": "deno"
936 // }
937 },
938 // Vim settings
939 "vim": {
940 "use_system_clipboard": "always",
941 "use_multiline_find": false,
942 "use_smartcase_find": false,
943 "custom_digraphs": {}
944 },
945 // The server to connect to. If the environment variable
946 // ZED_SERVER_URL is set, it will override this setting.
947 "server_url": "https://zed.dev",
948 // Settings overrides to use when using Zed Preview.
949 // Mostly useful for developers who are managing multiple instances of Zed.
950 "preview": {
951 // "theme": "Andromeda"
952 },
953 // Settings overrides to use when using Zed Nightly.
954 // Mostly useful for developers who are managing multiple instances of Zed.
955 "nightly": {
956 // "theme": "Andromeda"
957 },
958 // Settings overrides to use when using Zed Stable.
959 // Mostly useful for developers who are managing multiple instances of Zed.
960 "stable": {
961 // "theme": "Andromeda"
962 },
963 // Settings overrides to use when using Zed Dev.
964 // Mostly useful for developers who are managing multiple instances of Zed.
965 "dev": {
966 // "theme": "Andromeda"
967 },
968 // Task-related settings.
969 "task": {
970 // Whether to show task status indicator in the status bar. Default: true
971 "show_status_indicator": true
972 },
973 // Whether to show full labels in line indicator or short ones
974 //
975 // Values:
976 // - `short`: "2 s, 15 l, 32 c"
977 // - `long`: "2 selections, 15 lines, 32 characters"
978 // Default: long
979 "line_indicator_format": "long",
980 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
981 //
982 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
983 // `socks5h`. `http` will be used when no scheme is specified.
984 //
985 // By default no proxy will be used, or Zed will try get proxy settings from
986 // environment variables.
987 //
988 // Examples:
989 // - "proxy": "socks5://localhost:10808"
990 // - "proxy": "http://127.0.0.1:10809"
991 "proxy": null,
992 // Set to configure aliases for the command palette.
993 // When typing a query which is a key of this object, the value will be used instead.
994 //
995 // Examples:
996 // {
997 // "W": "workspace::Save"
998 // }
999 "command_aliases": {},
1000 // ssh_connections is an array of ssh connections.
1001 // By default this setting is null, which disables the direct ssh connection support.
1002 // You can configure these from `project: Open Remote` in the command palette.
1003 // Zed's ssh support will pull configuration from your ~/.ssh too.
1004 // Examples:
1005 // [
1006 // {
1007 // "host": "example-box",
1008 // "projects": [
1009 // {
1010 // "paths": ["/home/user/code/zed"]
1011 // }
1012 // ]
1013 // }
1014 // ]
1015 "ssh_connections": null,
1016 // Configures the Context Server Protocol binaries
1017 //
1018 // Examples:
1019 // {
1020 // "id": "server-1",
1021 // "executable": "/path",
1022 // "args": ['arg1", "args2"]
1023 // }
1024 "experimental.context_servers": {
1025 "servers": []
1026 }
1027}