1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 // The name of a base set of key bindings to use.
14 // This setting can take four values, each named after another
15 // text editor:
16 //
17 // 1. "VSCode"
18 // 2. "Atom"
19 // 3. "JetBrains"
20 // 4. "None"
21 // 5. "SublimeText"
22 // 6. "TextMate"
23 "base_keymap": "VSCode",
24 // Features that can be globally enabled or disabled
25 "features": {
26 // Which inline completion provider to use.
27 "inline_completion_provider": "copilot"
28 },
29 // The name of a font to use for rendering text in the editor
30 "buffer_font_family": "Zed Plex Mono",
31 // Set the buffer text's font fallbacks, this will be merged with
32 // the platform's default fallbacks.
33 "buffer_font_fallbacks": null,
34 // The OpenType features to enable for text in the editor.
35 "buffer_font_features": {
36 // Disable ligatures:
37 // "calt": false
38 },
39 // The default font size for text in the editor
40 "buffer_font_size": 15,
41 // The weight of the editor font in standard CSS units from 100 to 900.
42 "buffer_font_weight": 400,
43 // Set the buffer's line height.
44 // May take 3 values:
45 // 1. Use a line height that's comfortable for reading (1.618)
46 // "buffer_line_height": "comfortable"
47 // 2. Use a standard line height, (1.3)
48 // "buffer_line_height": "standard",
49 // 3. Use a custom line height
50 // "buffer_line_height": {
51 // "custom": 2
52 // },
53 "buffer_line_height": "comfortable",
54 // The name of a font to use for rendering text in the UI
55 // You can set this to ".SystemUIFont" to use the system font
56 "ui_font_family": "Zed Plex Sans",
57 // Set the UI's font fallbacks, this will be merged with the platform's
58 // default font fallbacks.
59 "ui_font_fallbacks": null,
60 // The OpenType features to enable for text in the UI
61 "ui_font_features": {
62 // Disable ligatures:
63 "calt": false
64 },
65 // The weight of the UI font in standard CSS units from 100 to 900.
66 "ui_font_weight": 400,
67 // The default font size for text in the UI
68 "ui_font_size": 16,
69 // How much to fade out unused code.
70 "unnecessary_code_fade": 0.3,
71 // The factor to grow the active pane by. Defaults to 1.0
72 // which gives the same size as all other panes.
73 "active_pane_magnification": 1.0,
74 // The direction that you want to split panes horizontally. Defaults to "up"
75 "pane_split_direction_horizontal": "up",
76 // The direction that you want to split panes horizontally. Defaults to "left"
77 "pane_split_direction_vertical": "left",
78 // Centered layout related settings.
79 "centered_layout": {
80 // The relative width of the left padding of the central pane from the
81 // workspace when the centered layout is used.
82 "left_padding": 0.2,
83 // The relative width of the right padding of the central pane from the
84 // workspace when the centered layout is used.
85 "right_padding": 0.2
86 },
87 // The key to use for adding multiple cursors
88 // Currently "alt" or "cmd_or_ctrl" (also aliased as
89 // "cmd" and "ctrl") are supported.
90 "multi_cursor_modifier": "alt",
91 // Whether to enable vim modes and key bindings.
92 "vim_mode": false,
93 // Whether to show the informational hover box when moving the mouse
94 // over symbols in the editor.
95 "hover_popover_enabled": true,
96 // Whether to confirm before quitting Zed.
97 "confirm_quit": false,
98 // Whether to restore last closed project when fresh Zed instance is opened.
99 "restore_on_startup": "last_session",
100 // Size of the drop target in the editor.
101 "drop_target_size": 0.2,
102 // Whether the window should be closed when using 'close active item' on a window with no tabs.
103 // May take 3 values:
104 // 1. Use the current platform's convention
105 // "when_closing_with_no_tabs": "platform_default"
106 // 2. Always close the window:
107 // "when_closing_with_no_tabs": "close_window",
108 // 3. Never close the window
109 // "when_closing_with_no_tabs": "keep_window_open",
110 "when_closing_with_no_tabs": "platform_default",
111 // Whether to use the system provided dialogs for Open and Save As.
112 // When set to false, Zed will use the built-in keyboard-first pickers.
113 "use_system_path_prompts": true,
114 // Whether the cursor blinks in the editor.
115 "cursor_blink": true,
116 // Cursor shape for the default editor.
117 // 1. A vertical bar
118 // "bar"
119 // 2. A block that surrounds the following character
120 // "block"
121 // 3. An underline that runs along the following character
122 // "underscore"
123 // 4. A box drawn around the following character
124 // "hollow"
125 //
126 // Default: not set, defaults to "bar"
127 "cursor_shape": null,
128 // How to highlight the current line in the editor.
129 //
130 // 1. Don't highlight the current line:
131 // "none"
132 // 2. Highlight the gutter area:
133 // "gutter"
134 // 3. Highlight the editor area:
135 // "line"
136 // 4. Highlight the full line (default):
137 // "all"
138 "current_line_highlight": "all",
139 // Whether to pop the completions menu while typing in an editor without
140 // explicitly requesting it.
141 "show_completions_on_input": true,
142 // Whether to display inline and alongside documentation for items in the
143 // completions menu
144 "show_completion_documentation": true,
145 // The debounce delay before re-querying the language server for completion
146 // documentation when not included in original completion list.
147 "completion_documentation_secondary_query_debounce": 300,
148 // Show method signatures in the editor, when inside parentheses.
149 "auto_signature_help": false,
150 /// Whether to show the signature help after completion or a bracket pair inserted.
151 /// If `auto_signature_help` is enabled, this setting will be treated as enabled also.
152 "show_signature_help_after_edits": true,
153 // Whether to show wrap guides (vertical rulers) in the editor.
154 // Setting this to true will show a guide at the 'preferred_line_length' value
155 // if softwrap is set to 'preferred_line_length', and will show any
156 // additional guides as specified by the 'wrap_guides' setting.
157 "show_wrap_guides": true,
158 // Character counts at which to show wrap guides in the editor.
159 "wrap_guides": [],
160 // Hide the values of in variables from visual display in private files
161 "redact_private_values": false,
162 // The default number of lines to expand excerpts in the multibuffer by.
163 "expand_excerpt_lines": 3,
164 // Globs to match against file paths to determine if a file is private.
165 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
166 // Whether to use additional LSP queries to format (and amend) the code after
167 // every "trigger" symbol input, defined by LSP server capabilities.
168 "use_on_type_format": true,
169 // Whether to automatically add matching closing characters when typing
170 // opening parenthesis, bracket, brace, single or double quote characters.
171 // For example, when you type (, Zed will add a closing ) at the correct position.
172 "use_autoclose": true,
173 // Whether to automatically surround selected text when typing opening parenthesis,
174 // bracket, brace, single or double quote characters.
175 // For example, when you select text and type (, Zed will surround the text with ().
176 "use_auto_surround": true,
177 // Controls how the editor handles the autoclosed characters.
178 // When set to `false`(default), skipping over and auto-removing of the closing characters
179 // happen only for auto-inserted characters.
180 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
181 // no matter how they were inserted.
182 "always_treat_brackets_as_autoclosed": false,
183 // Controls whether inline completions are shown immediately (true)
184 // or manually by triggering `editor::ShowInlineCompletion` (false).
185 "show_inline_completions": true,
186 // Whether to show tabs and spaces in the editor.
187 // This setting can take three values:
188 //
189 // 1. Draw tabs and spaces only for the selected text (default):
190 // "selection"
191 // 2. Do not draw any tabs or spaces:
192 // "none"
193 // 3. Draw all invisible symbols:
194 // "all"
195 // 4. Draw whitespaces at boundaries only:
196 // "boundary"
197 // For a whitespace to be on a boundary, any of the following conditions need to be met:
198 // - It is a tab
199 // - It is adjacent to an edge (start or end)
200 // - It is adjacent to a whitespace (left or right)
201 "show_whitespaces": "selection",
202 // Settings related to calls in Zed
203 "calls": {
204 // Join calls with the microphone live by default
205 "mute_on_join": false,
206 // Share your project when you are the first to join a channel
207 "share_on_join": false
208 },
209 // Toolbar related settings
210 "toolbar": {
211 // Whether to show breadcrumbs.
212 "breadcrumbs": true,
213 // Whether to show quick action buttons.
214 "quick_actions": true,
215 // Whether to show the Selections menu in the editor toolbar
216 "selections_menu": true
217 },
218 // Scrollbar related settings
219 "scrollbar": {
220 // When to show the scrollbar in the editor.
221 // This setting can take four values:
222 //
223 // 1. Show the scrollbar if there's important information or
224 // follow the system's configured behavior (default):
225 // "auto"
226 // 2. Match the system's configured behavior:
227 // "system"
228 // 3. Always show the scrollbar:
229 // "always"
230 // 4. Never show the scrollbar:
231 // "never"
232 "show": "auto",
233 // Whether to show cursor positions in the scrollbar.
234 "cursors": true,
235 // Whether to show git diff indicators in the scrollbar.
236 "git_diff": true,
237 // Whether to show buffer search results in the scrollbar.
238 "search_results": true,
239 // Whether to show selected symbol occurrences in the scrollbar.
240 "selected_symbol": true,
241 // Whether to show diagnostic indicators in the scrollbar.
242 "diagnostics": true
243 },
244 // Enable middle-click paste on Linux.
245 "middle_click_paste": true,
246 // What to do when multibuffer is double clicked in some of its excerpts
247 // (parts of singleton buffers).
248 // May take 2 values:
249 // 1. Behave as a regular buffer and select the whole word (default).
250 // "double_click_in_multibuffer": "select"
251 // 2. Open the excerpt clicked as a new buffer in the new tab.
252 // "double_click_in_multibuffer": "open",
253 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
254 "double_click_in_multibuffer": "select",
255 "gutter": {
256 // Whether to show line numbers in the gutter.
257 "line_numbers": true,
258 // Whether to show code action buttons in the gutter.
259 "code_actions": true,
260 // Whether to show runnables buttons in the gutter.
261 "runnables": true,
262 // Whether to show fold buttons in the gutter.
263 "folds": true
264 },
265 "indent_guides": {
266 /// Whether to show indent guides in the editor.
267 "enabled": true,
268 /// The width of the indent guides in pixels, between 1 and 10.
269 "line_width": 1,
270 /// The width of the active indent guide in pixels, between 1 and 10.
271 "active_line_width": 1,
272 /// Determines how indent guides are colored.
273 /// This setting can take the following three values:
274 ///
275 /// 1. "disabled"
276 /// 2. "fixed"
277 /// 3. "indent_aware"
278 "coloring": "fixed",
279 /// Determines how indent guide backgrounds are colored.
280 /// This setting can take the following two values:
281 ///
282 /// 1. "disabled"
283 /// 2. "indent_aware"
284 "background_coloring": "disabled"
285 },
286 // Whether the editor will scroll beyond the last line.
287 "scroll_beyond_last_line": "one_page",
288 // The number of lines to keep above/below the cursor when scrolling.
289 "vertical_scroll_margin": 3,
290 // Scroll sensitivity multiplier. This multiplier is applied
291 // to both the horizontal and vertical delta values while scrolling.
292 "scroll_sensitivity": 1.0,
293 "relative_line_numbers": false,
294 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
295 "search_wrap": true,
296 // Search options to enable by default when opening new project and buffer searches.
297 "search": {
298 "whole_word": false,
299 "case_sensitive": false,
300 "include_ignored": false,
301 "regex": false
302 },
303 // When to populate a new search's query based on the text under the cursor.
304 // This setting can take the following three values:
305 //
306 // 1. Always populate the search query with the word under the cursor (default).
307 // "always"
308 // 2. Only populate the search query when there is text selected
309 // "selection"
310 // 3. Never populate the search query
311 // "never"
312 "seed_search_query_from_cursor": "always",
313 "use_smartcase_search": false,
314 // Inlay hint related settings
315 "inlay_hints": {
316 // Global switch to toggle hints on and off, switched off by default.
317 "enabled": false,
318 // Toggle certain types of hints on and off, all switched on by default.
319 "show_type_hints": true,
320 "show_parameter_hints": true,
321 // Corresponds to null/None LSP hint type value.
322 "show_other_hints": true,
323 // Whether to show a background for inlay hints.
324 //
325 // If set to `true`, the background will use the `hint.background` color from the current theme.
326 "show_background": false,
327 // Time to wait after editing the buffer, before requesting the hints,
328 // set to 0 to disable debouncing.
329 "edit_debounce_ms": 700,
330 // Time to wait after scrolling the buffer, before requesting the hints,
331 // set to 0 to disable debouncing.
332 "scroll_debounce_ms": 50
333 },
334 "project_panel": {
335 // Whether to show the project panel button in the status bar
336 "button": true,
337 // Default width of the project panel.
338 "default_width": 240,
339 // Where to dock the project panel. Can be 'left' or 'right'.
340 "dock": "left",
341 // Whether to show file icons in the project panel.
342 "file_icons": true,
343 // Whether to show folder icons or chevrons for directories in the project panel.
344 "folder_icons": true,
345 // Whether to show the git status in the project panel.
346 "git_status": true,
347 // Amount of indentation for nested items.
348 "indent_size": 20,
349 // Whether to reveal it in the project panel automatically,
350 // when a corresponding project entry becomes active.
351 // Gitignored entries are never auto revealed.
352 "auto_reveal_entries": true,
353 // Whether to fold directories automatically and show compact folders
354 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
355 "auto_fold_dirs": true,
356 /// Scrollbar-related settings
357 "scrollbar": {
358 /// When to show the scrollbar in the project panel.
359 ///
360 /// Default: always
361 "show": "always"
362 }
363 },
364 "outline_panel": {
365 // Whether to show the outline panel button in the status bar
366 "button": true,
367 // Default width of the outline panel.
368 "default_width": 300,
369 // Where to dock the outline panel. Can be 'left' or 'right'.
370 "dock": "left",
371 // Whether to show file icons in the outline panel.
372 "file_icons": true,
373 // Whether to show folder icons or chevrons for directories in the outline panel.
374 "folder_icons": true,
375 // Whether to show the git status in the outline panel.
376 "git_status": true,
377 // Amount of indentation for nested items.
378 "indent_size": 20,
379 // Whether to reveal it in the outline panel automatically,
380 // when a corresponding outline entry becomes active.
381 // Gitignored entries are never auto revealed.
382 "auto_reveal_entries": true,
383 /// Whether to fold directories automatically
384 /// when a directory has only one directory inside.
385 "auto_fold_dirs": true
386 },
387 "collaboration_panel": {
388 // Whether to show the collaboration panel button in the status bar.
389 "button": true,
390 // Where to dock the collaboration panel. Can be 'left' or 'right'.
391 "dock": "left",
392 // Default width of the collaboration panel.
393 "default_width": 240
394 },
395 "chat_panel": {
396 // Whether to show the chat panel button in the status bar.
397 "button": true,
398 // Where to the chat panel. Can be 'left' or 'right'.
399 "dock": "right",
400 // Default width of the chat panel.
401 "default_width": 240
402 },
403 "message_editor": {
404 // Whether to automatically replace emoji shortcodes with emoji characters.
405 // For example: typing `:wave:` gets replaced with `👋`.
406 "auto_replace_emoji_shortcode": true
407 },
408 "notification_panel": {
409 // Whether to show the notification panel button in the status bar.
410 "button": true,
411 // Where to dock the notification panel. Can be 'left' or 'right'.
412 "dock": "right",
413 // Default width of the notification panel.
414 "default_width": 380
415 },
416 "assistant": {
417 // Version of this setting.
418 "version": "2",
419 // Whether the assistant is enabled.
420 "enabled": true,
421 // Whether to show the assistant panel button in the status bar.
422 "button": true,
423 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
424 "dock": "right",
425 // Default width when the assistant is docked to the left or right.
426 "default_width": 640,
427 // Default height when the assistant is docked to the bottom.
428 "default_height": 320,
429 // The default model to use when creating new contexts.
430 "default_model": {
431 // The provider to use.
432 "provider": "zed.dev",
433 // The model to use.
434 "model": "claude-3-5-sonnet"
435 }
436 },
437 // The settings for slash commands.
438 "slash_commands": {
439 // Settings for the `/docs` slash command.
440 "docs": {
441 // Whether `/docs` is enabled.
442 "enabled": false
443 },
444 // Settings for the `/project` slash command.
445 "project": {
446 // Whether `/project` is enabled.
447 "enabled": false
448 }
449 },
450 // Whether the screen sharing icon is shown in the os status bar.
451 "show_call_status_icon": true,
452 // Whether to use language servers to provide code intelligence.
453 "enable_language_server": true,
454 // Whether to perform linked edits of associated ranges, if the language server supports it.
455 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
456 "linked_edits": true,
457 // The list of language servers to use (or disable) for all languages.
458 //
459 // This is typically customized on a per-language basis.
460 "language_servers": ["..."],
461 // When to automatically save edited buffers. This setting can
462 // take four values.
463 //
464 // 1. Never automatically save:
465 // "autosave": "off",
466 // 2. Save when changing focus away from the Zed window:
467 // "autosave": "on_window_change",
468 // 3. Save when changing focus away from a specific buffer:
469 // "autosave": "on_focus_change",
470 // 4. Save when idle for a certain amount of time:
471 // "autosave": { "after_delay": {"milliseconds": 500} },
472 "autosave": "off",
473 // Settings related to the editor's tab bar.
474 "tab_bar": {
475 // Whether or not to show the tab bar in the editor
476 "show": true,
477 // Whether or not to show the navigation history buttons.
478 "show_nav_history_buttons": true
479 },
480 // Settings related to the editor's tabs
481 "tabs": {
482 // Show git status colors in the editor tabs.
483 "git_status": false,
484 // Position of the close button on the editor tabs.
485 "close_position": "right",
486 // Whether to show the file icon for a tab.
487 "file_icons": false
488 },
489 // Settings related to preview tabs.
490 "preview_tabs": {
491 // Whether preview tabs should be enabled.
492 // Preview tabs allow you to open files in preview mode, where they close automatically
493 // when you switch to another file unless you explicitly pin them.
494 // This is useful for quickly viewing files without cluttering your workspace.
495 "enabled": true,
496 // Whether to open tabs in preview mode when selected from the file finder.
497 "enable_preview_from_file_finder": false,
498 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
499 "enable_preview_from_code_navigation": false
500 },
501 // Settings related to the file finder.
502 "file_finder": {
503 // Whether to show file icons in the file finder.
504 "file_icons": true
505 },
506 // Whether or not to remove any trailing whitespace from lines of a buffer
507 // before saving it.
508 "remove_trailing_whitespace_on_save": true,
509 // Whether to start a new line with a comment when a previous line is a comment as well.
510 "extend_comment_on_newline": true,
511 // Whether or not to ensure there's a single newline at the end of a buffer
512 // when saving it.
513 "ensure_final_newline_on_save": true,
514 // Whether or not to perform a buffer format before saving
515 //
516 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
517 "format_on_save": "on",
518 // How to perform a buffer format. This setting can take 4 values:
519 //
520 // 1. Format code using the current language server:
521 // "formatter": "language_server"
522 // 2. Format code using an external command:
523 // "formatter": {
524 // "external": {
525 // "command": "prettier",
526 // "arguments": ["--stdin-filepath", "{buffer_path}"]
527 // }
528 // }
529 // 3. Format code using Zed's Prettier integration:
530 // "formatter": "prettier"
531 // 4. Default. Format files using Zed's Prettier integration (if applicable),
532 // or falling back to formatting via language server:
533 // "formatter": "auto"
534 "formatter": "auto",
535 // How to soft-wrap long lines of text.
536 // Possible values:
537 //
538 // 1. Do not soft wrap.
539 // "soft_wrap": "none",
540 // 2. Prefer a single line generally, unless an overly long line is encountered.
541 // "soft_wrap": "prefer_line",
542 // 3. Soft wrap lines that overflow the editor.
543 // "soft_wrap": "editor_width",
544 // 4. Soft wrap lines at the preferred line length.
545 // "soft_wrap": "preferred_line_length",
546 // 5. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
547 // "soft_wrap": "bounded",
548 "soft_wrap": "prefer_line",
549 // The column at which to soft-wrap lines, for buffers where soft-wrap
550 // is enabled.
551 "preferred_line_length": 80,
552 // Whether to indent lines using tab characters, as opposed to multiple
553 // spaces.
554 "hard_tabs": false,
555 // How many columns a tab should occupy.
556 "tab_size": 4,
557 // Control what info is collected by Zed.
558 "telemetry": {
559 // Send debug info like crash reports.
560 "diagnostics": true,
561 // Send anonymized usage data like what languages you're using Zed with.
562 "metrics": true
563 },
564 // Automatically update Zed. This setting may be ignored on Linux if
565 // installed through a package manager.
566 "auto_update": true,
567 // Diagnostics configuration.
568 "diagnostics": {
569 // Whether to show warnings or not by default.
570 "include_warnings": true
571 },
572 // Add files or globs of files that will be excluded by Zed entirely:
573 // they will be skipped during FS scan(s), file tree and file search
574 // will lack the corresponding file entries.
575 "file_scan_exclusions": [
576 "**/.git",
577 "**/.svn",
578 "**/.hg",
579 "**/CVS",
580 "**/.DS_Store",
581 "**/Thumbs.db",
582 "**/.classpath",
583 "**/.settings"
584 ],
585 // Git gutter behavior configuration.
586 "git": {
587 // Control whether the git gutter is shown. May take 2 values:
588 // 1. Show the gutter
589 // "git_gutter": "tracked_files"
590 // 2. Hide the gutter
591 // "git_gutter": "hide"
592 "git_gutter": "tracked_files",
593 // Control whether the git blame information is shown inline,
594 // in the currently focused line.
595 "inline_blame": {
596 "enabled": true
597 // Sets a delay after which the inline blame information is shown.
598 // Delay is restarted with every cursor movement.
599 // "delay_ms": 600
600 }
601 },
602 // Configuration for how direnv configuration should be loaded. May take 2 values:
603 // 1. Load direnv configuration through the shell hook, works for POSIX shells and fish.
604 // "load_direnv": "shell_hook"
605 // 2. Load direnv configuration using `direnv export json` directly.
606 // This can help with some shells that otherwise would not detect
607 // the direnv environment, such as nushell or elvish.
608 // "load_direnv": "direct"
609 "load_direnv": "shell_hook",
610 "inline_completions": {
611 // A list of globs representing files that inline completions should be disabled for.
612 "disabled_globs": [".env"]
613 },
614 // Settings specific to journaling
615 "journal": {
616 // The path of the directory where journal entries are stored
617 "path": "~",
618 // What format to display the hours in
619 // May take 2 values:
620 // 1. hour12
621 // 2. hour24
622 "hour_format": "hour12"
623 },
624 // Settings specific to the terminal
625 "terminal": {
626 // What shell to use when opening a terminal. May take 3 values:
627 // 1. Use the system's default terminal configuration in /etc/passwd
628 // "shell": "system"
629 // 2. A program:
630 // "shell": {
631 // "program": "sh"
632 // }
633 // 3. A program with arguments:
634 // "shell": {
635 // "with_arguments": {
636 // "program": "/bin/bash",
637 // "args": ["--login"]
638 // }
639 // }
640 "shell": "system",
641 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
642 "dock": "bottom",
643 // Default width when the terminal is docked to the left or right.
644 "default_width": 640,
645 // Default height when the terminal is docked to the bottom.
646 "default_height": 320,
647 // What working directory to use when launching the terminal.
648 // May take 4 values:
649 // 1. Use the current file's project directory. Will Fallback to the
650 // first project directory strategy if unsuccessful
651 // "working_directory": "current_project_directory"
652 // 2. Use the first project in this workspace's directory
653 // "working_directory": "first_project_directory"
654 // 3. Always use this platform's home directory (if we can find it)
655 // "working_directory": "always_home"
656 // 4. Always use a specific directory. This value will be shell expanded.
657 // If this path is not a valid directory the terminal will default to
658 // this platform's home directory (if we can find it)
659 // "working_directory": {
660 // "always": {
661 // "directory": "~/zed/projects/"
662 // }
663 // }
664 "working_directory": "current_project_directory",
665 // Set the cursor blinking behavior in the terminal.
666 // May take 3 values:
667 // 1. Never blink the cursor, ignoring the terminal mode
668 // "blinking": "off",
669 // 2. Default the cursor blink to off, but allow the terminal to
670 // set blinking
671 // "blinking": "terminal_controlled",
672 // 3. Always blink the cursor, ignoring the terminal mode
673 // "blinking": "on",
674 "blinking": "terminal_controlled",
675 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
676 // Alternate Scroll mode converts mouse scroll events into up / down key
677 // presses when in the alternate screen (e.g. when running applications
678 // like vim or less). The terminal can still set and unset this mode.
679 // May take 2 values:
680 // 1. Default alternate scroll mode to on
681 // "alternate_scroll": "on",
682 // 2. Default alternate scroll mode to off
683 // "alternate_scroll": "off",
684 "alternate_scroll": "off",
685 // Set whether the option key behaves as the meta key.
686 // May take 2 values:
687 // 1. Rely on default platform handling of option key, on macOS
688 // this means generating certain unicode characters
689 // "option_to_meta": false,
690 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
691 // "option_to_meta": true,
692 "option_as_meta": true,
693 // Whether or not selecting text in the terminal will automatically
694 // copy to the system clipboard.
695 "copy_on_select": false,
696 // Whether to show the terminal button in the status bar
697 "button": true,
698 // Any key-value pairs added to this list will be added to the terminal's
699 // environment. Use `:` to separate multiple values.
700 "env": {
701 // "KEY": "value1:value2"
702 },
703 // Set the terminal's line height.
704 // May take 3 values:
705 // 1. Use a line height that's comfortable for reading, 1.618
706 // "line_height": "comfortable"
707 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
708 // particularly if they use box characters
709 // "line_height": "standard",
710 // 3. Use a custom line height.
711 // "line_height": {
712 // "custom": 2
713 // },
714 "line_height": "comfortable",
715 // Activate the python virtual environment, if one is found, in the
716 // terminal's working directory (as resolved by the working_directory
717 // setting). Set this to "off" to disable this behavior.
718 "detect_venv": {
719 "on": {
720 // Default directories to search for virtual environments, relative
721 // to the current working directory. We recommend overriding this
722 // in your project's settings, rather than globally.
723 "directories": [".env", "env", ".venv", "venv"],
724 // Can also be `csh`, `fish`, `nushell` and `power_shell`
725 "activate_script": "default"
726 }
727 },
728 "toolbar": {
729 // Whether to display the terminal title in its toolbar.
730 "title": true
731 }
732 // Set the terminal's font size. If this option is not included,
733 // the terminal will default to matching the buffer's font size.
734 // "font_size": 15,
735 // Set the terminal's font family. If this option is not included,
736 // the terminal will default to matching the buffer's font family.
737 // "font_family": "Zed Plex Mono",
738 // Set the terminal's font fallbacks. If this option is not included,
739 // the terminal will default to matching the buffer's font fallbacks.
740 // This will be merged with the platform's default font fallbacks
741 // "font_fallbacks": ["FiraCode Nerd Fonts"],
742 // Sets the maximum number of lines in the terminal's scrollback buffer.
743 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
744 // Existing terminals will not pick up this change until they are recreated.
745 // "max_scroll_history_lines": 10000,
746 },
747 "code_actions_on_format": {},
748 /// Settings related to running tasks.
749 "tasks": {
750 "variables": {}
751 },
752 // An object whose keys are language names, and whose values
753 // are arrays of filenames or extensions of files that should
754 // use those languages.
755 //
756 // For example, to treat files like `foo.notjs` as JavaScript,
757 // and `Embargo.lock` as TOML:
758 //
759 // {
760 // "JavaScript": ["notjs"],
761 // "TOML": ["Embargo.lock"]
762 // }
763 //
764 "file_types": {
765 "Plain Text": ["txt"],
766 "JSON": ["flake.lock"],
767 "JSONC": [
768 "**/.zed/**/*.json",
769 "**/zed/**/*.json",
770 "**/Zed/**/*.json",
771 "tsconfig.json",
772 "pyrightconfig.json"
773 ]
774 },
775 /// By default use a recent system version of node, or install our own.
776 /// You can override this to use a version of node that is not in $PATH with:
777 /// {
778 /// "node": {
779 /// "node_path": "/path/to/node"
780 /// "npm_path": "/path/to/npm" (defaults to node_path/../npm)
781 /// }
782 /// }
783 /// or to ensure Zed always downloads and installs an isolated version of node:
784 /// {
785 /// "node": {
786 /// "disable_path_lookup": true
787 /// }
788 /// NOTE: changing this setting currently requires restarting Zed.
789 "node": {},
790 // The extensions that Zed should automatically install on startup.
791 //
792 // If you don't want any of these extensions, add this field to your settings
793 // and change the value to `false`.
794 "auto_install_extensions": {
795 "html": true
796 },
797 // Different settings for specific languages.
798 "languages": {
799 "Astro": {
800 "prettier": {
801 "allowed": true,
802 "plugins": ["prettier-plugin-astro"]
803 }
804 },
805 "Blade": {
806 "prettier": {
807 "allowed": true
808 }
809 },
810 "C": {
811 "format_on_save": "off",
812 "use_on_type_format": false
813 },
814 "C++": {
815 "format_on_save": "off",
816 "use_on_type_format": false
817 },
818 "CSS": {
819 "prettier": {
820 "allowed": true
821 }
822 },
823 "Elixir": {
824 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
825 },
826 "Erlang": {
827 "language_servers": ["erlang-ls", "!elp", "..."]
828 },
829 "Go": {
830 "code_actions_on_format": {
831 "source.organizeImports": true
832 }
833 },
834 "GraphQL": {
835 "prettier": {
836 "allowed": true
837 }
838 },
839 "HEEX": {
840 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
841 },
842 "HTML": {
843 "prettier": {
844 "allowed": true
845 }
846 },
847 "Java": {
848 "prettier": {
849 "allowed": true,
850 "plugins": ["prettier-plugin-java"]
851 }
852 },
853 "JavaScript": {
854 "language_servers": ["!typescript-language-server", "vtsls", "..."],
855 "prettier": {
856 "allowed": true
857 }
858 },
859 "JSON": {
860 "prettier": {
861 "allowed": true
862 }
863 },
864 "JSONC": {
865 "prettier": {
866 "allowed": true
867 }
868 },
869 "Markdown": {
870 "format_on_save": "off",
871 "use_on_type_format": false,
872 "prettier": {
873 "allowed": true
874 }
875 },
876 "PHP": {
877 "language_servers": ["phpactor", "!intelephense", "..."],
878 "prettier": {
879 "allowed": true,
880 "plugins": ["@prettier/plugin-php"],
881 "parser": "php"
882 }
883 },
884 "Ruby": {
885 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
886 },
887 "SCSS": {
888 "prettier": {
889 "allowed": true
890 }
891 },
892 "SQL": {
893 "prettier": {
894 "allowed": true,
895 "plugins": ["prettier-plugin-sql"]
896 }
897 },
898 "Starlark": {
899 "language_servers": ["starpls", "!buck2-lsp", "..."]
900 },
901 "Svelte": {
902 "language_servers": ["svelte-language-server", "..."],
903 "prettier": {
904 "allowed": true,
905 "plugins": ["prettier-plugin-svelte"]
906 }
907 },
908 "TSX": {
909 "language_servers": ["!typescript-language-server", "vtsls", "..."],
910 "prettier": {
911 "allowed": true
912 }
913 },
914 "Twig": {
915 "prettier": {
916 "allowed": true
917 }
918 },
919 "TypeScript": {
920 "language_servers": ["!typescript-language-server", "vtsls", "..."],
921 "prettier": {
922 "allowed": true
923 }
924 },
925 "Vue.js": {
926 "language_servers": ["vue-language-server", "..."],
927 "prettier": {
928 "allowed": true
929 }
930 },
931 "XML": {
932 "prettier": {
933 "allowed": true,
934 "plugins": ["@prettier/plugin-xml"]
935 }
936 },
937 "YAML": {
938 "prettier": {
939 "allowed": true
940 }
941 }
942 },
943 // Different settings for specific language models.
944 "language_models": {
945 "anthropic": {
946 "version": "1",
947 "api_url": "https://api.anthropic.com"
948 },
949 "google": {
950 "api_url": "https://generativelanguage.googleapis.com"
951 },
952 "ollama": {
953 "api_url": "http://localhost:11434",
954 "low_speed_timeout_in_seconds": 60
955 },
956 "openai": {
957 "version": "1",
958 "api_url": "https://api.openai.com/v1",
959 "low_speed_timeout_in_seconds": 600
960 }
961 },
962 // Zed's Prettier integration settings.
963 // Allows to enable/disable formatting with Prettier
964 // and configure default Prettier, used when no project-level Prettier installation is found.
965 "prettier": {
966 // // Whether to consider prettier formatter or not when attempting to format a file.
967 // "allowed": false,
968 //
969 // // Use regular Prettier json configuration.
970 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
971 // // the project has no other Prettier installed.
972 // "plugins": [],
973 //
974 // // Use regular Prettier json configuration.
975 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
976 // // the project has no other Prettier installed.
977 // "trailingComma": "es5",
978 // "tabWidth": 4,
979 // "semi": false,
980 // "singleQuote": true
981 },
982 // LSP Specific settings.
983 "lsp": {
984 // Specify the LSP name as a key here.
985 // "rust-analyzer": {
986 // // These initialization options are merged into Zed's defaults
987 // "initialization_options": {
988 // "check": {
989 // "command": "clippy" // rust-analyzer.check.command (default: "check")
990 // }
991 // }
992 // }
993 },
994 // Jupyter settings
995 "jupyter": {
996 "enabled": true
997 // Specify the language name as the key and the kernel name as the value.
998 // "kernel_selections": {
999 // "python": "conda-base"
1000 // "typescript": "deno"
1001 // }
1002 },
1003 // Vim settings
1004 "vim": {
1005 "toggle_relative_line_numbers": false,
1006 "use_system_clipboard": "always",
1007 "use_multiline_find": false,
1008 "use_smartcase_find": false,
1009 "custom_digraphs": {}
1010 },
1011 // The server to connect to. If the environment variable
1012 // ZED_SERVER_URL is set, it will override this setting.
1013 "server_url": "https://zed.dev",
1014 // Settings overrides to use when using Zed Preview.
1015 // Mostly useful for developers who are managing multiple instances of Zed.
1016 "preview": {
1017 // "theme": "Andromeda"
1018 },
1019 // Settings overrides to use when using Zed Nightly.
1020 // Mostly useful for developers who are managing multiple instances of Zed.
1021 "nightly": {
1022 // "theme": "Andromeda"
1023 },
1024 // Settings overrides to use when using Zed Stable.
1025 // Mostly useful for developers who are managing multiple instances of Zed.
1026 "stable": {
1027 // "theme": "Andromeda"
1028 },
1029 // Settings overrides to use when using Zed Dev.
1030 // Mostly useful for developers who are managing multiple instances of Zed.
1031 "dev": {
1032 // "theme": "Andromeda"
1033 },
1034 // Task-related settings.
1035 "task": {
1036 // Whether to show task status indicator in the status bar. Default: true
1037 "show_status_indicator": true
1038 },
1039 // Whether to show full labels in line indicator or short ones
1040 //
1041 // Values:
1042 // - `short`: "2 s, 15 l, 32 c"
1043 // - `long`: "2 selections, 15 lines, 32 characters"
1044 // Default: long
1045 "line_indicator_format": "long",
1046 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1047 //
1048 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1049 // `socks5h`. `http` will be used when no scheme is specified.
1050 //
1051 // By default no proxy will be used, or Zed will try get proxy settings from
1052 // environment variables.
1053 //
1054 // Examples:
1055 // - "proxy": "socks5h://localhost:10808"
1056 // - "proxy": "http://127.0.0.1:10809"
1057 "proxy": null,
1058 // Set to configure aliases for the command palette.
1059 // When typing a query which is a key of this object, the value will be used instead.
1060 //
1061 // Examples:
1062 // {
1063 // "W": "workspace::Save"
1064 // }
1065 "command_aliases": {},
1066 // ssh_connections is an array of ssh connections.
1067 // By default this setting is null, which disables the direct ssh connection support.
1068 // You can configure these from `project: Open Remote` in the command palette.
1069 // Zed's ssh support will pull configuration from your ~/.ssh too.
1070 // Examples:
1071 // [
1072 // {
1073 // "host": "example-box",
1074 // "projects": [
1075 // {
1076 // "paths": ["/home/user/code/zed"]
1077 // }
1078 // ]
1079 // }
1080 // ]
1081 "ssh_connections": null,
1082 // Configures the Context Server Protocol binaries
1083 //
1084 // Examples:
1085 // {
1086 // "id": "server-1",
1087 // "executable": "/path",
1088 // "args": ['arg1", "args2"]
1089 // }
1090 "experimental.context_servers": {
1091 "servers": []
1092 }
1093}