1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 // The name of a base set of key bindings to use.
14 // This setting can take four values, each named after another
15 // text editor:
16 //
17 // 1. "VSCode"
18 // 2. "Atom"
19 // 3. "JetBrains"
20 // 4. "None"
21 // 5. "SublimeText"
22 // 6. "TextMate"
23 "base_keymap": "VSCode",
24 // Features that can be globally enabled or disabled
25 "features": {
26 // Which inline completion provider to use.
27 "inline_completion_provider": "copilot"
28 },
29 // The name of a font to use for rendering text in the editor
30 "buffer_font_family": "Zed Plex Mono",
31 // Set the buffer text's font fallbacks, this will be merged with
32 // the platform's default fallbacks.
33 "buffer_font_fallbacks": null,
34 // The OpenType features to enable for text in the editor.
35 "buffer_font_features": {
36 // Disable ligatures:
37 // "calt": false
38 },
39 // The default font size for text in the editor
40 "buffer_font_size": 15,
41 // The weight of the editor font in standard CSS units from 100 to 900.
42 "buffer_font_weight": 400,
43 // Set the buffer's line height.
44 // May take 3 values:
45 // 1. Use a line height that's comfortable for reading (1.618)
46 // "buffer_line_height": "comfortable"
47 // 2. Use a standard line height, (1.3)
48 // "buffer_line_height": "standard",
49 // 3. Use a custom line height
50 // "buffer_line_height": {
51 // "custom": 2
52 // },
53 "buffer_line_height": "comfortable",
54 // The name of a font to use for rendering text in the UI
55 // You can set this to ".SystemUIFont" to use the system font
56 "ui_font_family": "Zed Plex Sans",
57 // Set the UI's font fallbacks, this will be merged with the platform's
58 // default font fallbacks.
59 "ui_font_fallbacks": null,
60 // The OpenType features to enable for text in the UI
61 "ui_font_features": {
62 // Disable ligatures:
63 "calt": false
64 },
65 // The weight of the UI font in standard CSS units from 100 to 900.
66 "ui_font_weight": 400,
67 // The default font size for text in the UI
68 "ui_font_size": 16,
69 // How much to fade out unused code.
70 "unnecessary_code_fade": 0.3,
71 // The factor to grow the active pane by. Defaults to 1.0
72 // which gives the same size as all other panes.
73 "active_pane_magnification": 1.0,
74 // The direction that you want to split panes horizontally. Defaults to "up"
75 "pane_split_direction_horizontal": "up",
76 // The direction that you want to split panes horizontally. Defaults to "left"
77 "pane_split_direction_vertical": "left",
78 // Centered layout related settings.
79 "centered_layout": {
80 // The relative width of the left padding of the central pane from the
81 // workspace when the centered layout is used.
82 "left_padding": 0.2,
83 // The relative width of the right padding of the central pane from the
84 // workspace when the centered layout is used.
85 "right_padding": 0.2
86 },
87 // The key to use for adding multiple cursors
88 // Currently "alt" or "cmd_or_ctrl" (also aliased as
89 // "cmd" and "ctrl") are supported.
90 "multi_cursor_modifier": "alt",
91 // Whether to enable vim modes and key bindings.
92 "vim_mode": false,
93 // Whether to show the informational hover box when moving the mouse
94 // over symbols in the editor.
95 "hover_popover_enabled": true,
96 // Whether to confirm before quitting Zed.
97 "confirm_quit": false,
98 // Whether to restore last closed project when fresh Zed instance is opened.
99 "restore_on_startup": "last_session",
100 // Size of the drop target in the editor.
101 "drop_target_size": 0.2,
102 // Whether the window should be closed when using 'close active item' on a window with no tabs.
103 // May take 3 values:
104 // 1. Use the current platform's convention
105 // "when_closing_with_no_tabs": "platform_default"
106 // 2. Always close the window:
107 // "when_closing_with_no_tabs": "close_window",
108 // 3. Never close the window
109 // "when_closing_with_no_tabs": "keep_window_open",
110 "when_closing_with_no_tabs": "platform_default",
111 // Whether to use the system provided dialogs for Open and Save As.
112 // When set to false, Zed will use the built-in keyboard-first pickers.
113 "use_system_path_prompts": true,
114 // Whether the cursor blinks in the editor.
115 "cursor_blink": true,
116 // Cursor shape for the default editor.
117 // 1. A vertical bar
118 // "bar"
119 // 2. A block that surrounds the following character
120 // "block"
121 // 3. An underline that runs along the following character
122 // "underscore"
123 // 4. A box drawn around the following character
124 // "hollow"
125 //
126 // Default: not set, defaults to "bar"
127 "cursor_shape": null,
128 // How to highlight the current line in the editor.
129 //
130 // 1. Don't highlight the current line:
131 // "none"
132 // 2. Highlight the gutter area:
133 // "gutter"
134 // 3. Highlight the editor area:
135 // "line"
136 // 4. Highlight the full line (default):
137 // "all"
138 "current_line_highlight": "all",
139 // Whether to pop the completions menu while typing in an editor without
140 // explicitly requesting it.
141 "show_completions_on_input": true,
142 // Whether to display inline and alongside documentation for items in the
143 // completions menu
144 "show_completion_documentation": true,
145 // The debounce delay before re-querying the language server for completion
146 // documentation when not included in original completion list.
147 "completion_documentation_secondary_query_debounce": 300,
148 // Show method signatures in the editor, when inside parentheses.
149 "auto_signature_help": false,
150 /// Whether to show the signature help after completion or a bracket pair inserted.
151 /// If `auto_signature_help` is enabled, this setting will be treated as enabled also.
152 "show_signature_help_after_edits": true,
153 // Whether to show wrap guides (vertical rulers) in the editor.
154 // Setting this to true will show a guide at the 'preferred_line_length' value
155 // if softwrap is set to 'preferred_line_length', and will show any
156 // additional guides as specified by the 'wrap_guides' setting.
157 "show_wrap_guides": true,
158 // Character counts at which to show wrap guides in the editor.
159 "wrap_guides": [],
160 // Hide the values of in variables from visual display in private files
161 "redact_private_values": false,
162 // The default number of lines to expand excerpts in the multibuffer by.
163 "expand_excerpt_lines": 3,
164 // Globs to match against file paths to determine if a file is private.
165 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
166 // Whether to use additional LSP queries to format (and amend) the code after
167 // every "trigger" symbol input, defined by LSP server capabilities.
168 "use_on_type_format": true,
169 // Whether to automatically add matching closing characters when typing
170 // opening parenthesis, bracket, brace, single or double quote characters.
171 // For example, when you type (, Zed will add a closing ) at the correct position.
172 "use_autoclose": true,
173 // Whether to automatically surround selected text when typing opening parenthesis,
174 // bracket, brace, single or double quote characters.
175 // For example, when you select text and type (, Zed will surround the text with ().
176 "use_auto_surround": true,
177 // Controls how the editor handles the autoclosed characters.
178 // When set to `false`(default), skipping over and auto-removing of the closing characters
179 // happen only for auto-inserted characters.
180 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
181 // no matter how they were inserted.
182 "always_treat_brackets_as_autoclosed": false,
183 // Controls whether inline completions are shown immediately (true)
184 // or manually by triggering `editor::ShowInlineCompletion` (false).
185 "show_inline_completions": true,
186 // Whether to show tabs and spaces in the editor.
187 // This setting can take three values:
188 //
189 // 1. Draw tabs and spaces only for the selected text (default):
190 // "selection"
191 // 2. Do not draw any tabs or spaces:
192 // "none"
193 // 3. Draw all invisible symbols:
194 // "all"
195 // 4. Draw whitespaces at boundaries only:
196 // "boundary"
197 // For a whitespace to be on a boundary, any of the following conditions need to be met:
198 // - It is a tab
199 // - It is adjacent to an edge (start or end)
200 // - It is adjacent to a whitespace (left or right)
201 "show_whitespaces": "selection",
202 // Settings related to calls in Zed
203 "calls": {
204 // Join calls with the microphone live by default
205 "mute_on_join": false,
206 // Share your project when you are the first to join a channel
207 "share_on_join": false
208 },
209 // Toolbar related settings
210 "toolbar": {
211 // Whether to show breadcrumbs.
212 "breadcrumbs": true,
213 // Whether to show quick action buttons.
214 "quick_actions": true,
215 // Whether to show the Selections menu in the editor toolbar
216 "selections_menu": true
217 },
218 // Scrollbar related settings
219 "scrollbar": {
220 // When to show the scrollbar in the editor.
221 // This setting can take four values:
222 //
223 // 1. Show the scrollbar if there's important information or
224 // follow the system's configured behavior (default):
225 // "auto"
226 // 2. Match the system's configured behavior:
227 // "system"
228 // 3. Always show the scrollbar:
229 // "always"
230 // 4. Never show the scrollbar:
231 // "never"
232 "show": "auto",
233 // Whether to show cursor positions in the scrollbar.
234 "cursors": true,
235 // Whether to show git diff indicators in the scrollbar.
236 "git_diff": true,
237 // Whether to show buffer search results in the scrollbar.
238 "search_results": true,
239 // Whether to show selected symbol occurrences in the scrollbar.
240 "selected_symbol": true,
241 // Whether to show diagnostic indicators in the scrollbar.
242 "diagnostics": true
243 },
244 // Enable middle-click paste on Linux.
245 "middle_click_paste": true,
246 // What to do when multibuffer is double clicked in some of its excerpts
247 // (parts of singleton buffers).
248 // May take 2 values:
249 // 1. Behave as a regular buffer and select the whole word (default).
250 // "double_click_in_multibuffer": "select"
251 // 2. Open the excerpt clicked as a new buffer in the new tab.
252 // "double_click_in_multibuffer": "open",
253 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
254 "double_click_in_multibuffer": "select",
255 "gutter": {
256 // Whether to show line numbers in the gutter.
257 "line_numbers": true,
258 // Whether to show code action buttons in the gutter.
259 "code_actions": true,
260 // Whether to show runnables buttons in the gutter.
261 "runnables": true,
262 // Whether to show fold buttons in the gutter.
263 "folds": true
264 },
265 "indent_guides": {
266 /// Whether to show indent guides in the editor.
267 "enabled": true,
268 /// The width of the indent guides in pixels, between 1 and 10.
269 "line_width": 1,
270 /// The width of the active indent guide in pixels, between 1 and 10.
271 "active_line_width": 1,
272 /// Determines how indent guides are colored.
273 /// This setting can take the following three values:
274 ///
275 /// 1. "disabled"
276 /// 2. "fixed"
277 /// 3. "indent_aware"
278 "coloring": "fixed",
279 /// Determines how indent guide backgrounds are colored.
280 /// This setting can take the following two values:
281 ///
282 /// 1. "disabled"
283 /// 2. "indent_aware"
284 "background_coloring": "disabled"
285 },
286 // Whether the editor will scroll beyond the last line.
287 "scroll_beyond_last_line": "one_page",
288 // The number of lines to keep above/below the cursor when scrolling.
289 "vertical_scroll_margin": 3,
290 // Scroll sensitivity multiplier. This multiplier is applied
291 // to both the horizontal and vertical delta values while scrolling.
292 "scroll_sensitivity": 1.0,
293 "relative_line_numbers": false,
294 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
295 "search_wrap": true,
296 // Search options to enable by default when opening new project and buffer searches.
297 "search": {
298 "whole_word": false,
299 "case_sensitive": false,
300 "include_ignored": false,
301 "regex": false
302 },
303 // When to populate a new search's query based on the text under the cursor.
304 // This setting can take the following three values:
305 //
306 // 1. Always populate the search query with the word under the cursor (default).
307 // "always"
308 // 2. Only populate the search query when there is text selected
309 // "selection"
310 // 3. Never populate the search query
311 // "never"
312 "seed_search_query_from_cursor": "always",
313 "use_smartcase_search": false,
314 // Inlay hint related settings
315 "inlay_hints": {
316 // Global switch to toggle hints on and off, switched off by default.
317 "enabled": false,
318 // Toggle certain types of hints on and off, all switched on by default.
319 "show_type_hints": true,
320 "show_parameter_hints": true,
321 // Corresponds to null/None LSP hint type value.
322 "show_other_hints": true,
323 // Whether to show a background for inlay hints.
324 //
325 // If set to `true`, the background will use the `hint.background` color from the current theme.
326 "show_background": false,
327 // Time to wait after editing the buffer, before requesting the hints,
328 // set to 0 to disable debouncing.
329 "edit_debounce_ms": 700,
330 // Time to wait after scrolling the buffer, before requesting the hints,
331 // set to 0 to disable debouncing.
332 "scroll_debounce_ms": 50
333 },
334 "project_panel": {
335 // Whether to show the project panel button in the status bar
336 "button": true,
337 // Default width of the project panel.
338 "default_width": 240,
339 // Where to dock the project panel. Can be 'left' or 'right'.
340 "dock": "left",
341 // Whether to show file icons in the project panel.
342 "file_icons": true,
343 // Whether to show folder icons or chevrons for directories in the project panel.
344 "folder_icons": true,
345 // Whether to show the git status in the project panel.
346 "git_status": true,
347 // Amount of indentation for nested items.
348 "indent_size": 20,
349 // Whether to reveal it in the project panel automatically,
350 // when a corresponding project entry becomes active.
351 // Gitignored entries are never auto revealed.
352 "auto_reveal_entries": true,
353 // Whether to fold directories automatically and show compact folders
354 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
355 "auto_fold_dirs": true,
356 /// Scrollbar-related settings
357 "scrollbar": {
358 /// When to show the scrollbar in the project panel.
359 /// This setting can take four values:
360 ///
361 /// 1. null (default): Inherit editor settings
362 /// 2. Show the scrollbar if there's important information or
363 /// follow the system's configured behavior (default):
364 /// "auto"
365 /// 3. Match the system's configured behavior:
366 /// "system"
367 /// 4. Always show the scrollbar:
368 /// "always"
369 /// 5. Never show the scrollbar:
370 /// "never"
371 "show": null
372 }
373 },
374 "outline_panel": {
375 // Whether to show the outline panel button in the status bar
376 "button": true,
377 // Default width of the outline panel.
378 "default_width": 300,
379 // Where to dock the outline panel. Can be 'left' or 'right'.
380 "dock": "left",
381 // Whether to show file icons in the outline panel.
382 "file_icons": true,
383 // Whether to show folder icons or chevrons for directories in the outline panel.
384 "folder_icons": true,
385 // Whether to show the git status in the outline panel.
386 "git_status": true,
387 // Amount of indentation for nested items.
388 "indent_size": 20,
389 // Whether to reveal it in the outline panel automatically,
390 // when a corresponding outline entry becomes active.
391 // Gitignored entries are never auto revealed.
392 "auto_reveal_entries": true,
393 /// Whether to fold directories automatically
394 /// when a directory has only one directory inside.
395 "auto_fold_dirs": true
396 },
397 "collaboration_panel": {
398 // Whether to show the collaboration panel button in the status bar.
399 "button": true,
400 // Where to dock the collaboration panel. Can be 'left' or 'right'.
401 "dock": "left",
402 // Default width of the collaboration panel.
403 "default_width": 240
404 },
405 "chat_panel": {
406 // Whether to show the chat panel button in the status bar.
407 "button": true,
408 // Where to the chat panel. Can be 'left' or 'right'.
409 "dock": "right",
410 // Default width of the chat panel.
411 "default_width": 240
412 },
413 "message_editor": {
414 // Whether to automatically replace emoji shortcodes with emoji characters.
415 // For example: typing `:wave:` gets replaced with `👋`.
416 "auto_replace_emoji_shortcode": true
417 },
418 "notification_panel": {
419 // Whether to show the notification panel button in the status bar.
420 "button": true,
421 // Where to dock the notification panel. Can be 'left' or 'right'.
422 "dock": "right",
423 // Default width of the notification panel.
424 "default_width": 380
425 },
426 "assistant": {
427 // Version of this setting.
428 "version": "2",
429 // Whether the assistant is enabled.
430 "enabled": true,
431 // Whether to show the assistant panel button in the status bar.
432 "button": true,
433 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
434 "dock": "right",
435 // Default width when the assistant is docked to the left or right.
436 "default_width": 640,
437 // Default height when the assistant is docked to the bottom.
438 "default_height": 320,
439 // The default model to use when creating new contexts.
440 "default_model": {
441 // The provider to use.
442 "provider": "zed.dev",
443 // The model to use.
444 "model": "claude-3-5-sonnet"
445 }
446 },
447 // The settings for slash commands.
448 "slash_commands": {
449 // Settings for the `/docs` slash command.
450 "docs": {
451 // Whether `/docs` is enabled.
452 "enabled": false
453 },
454 // Settings for the `/project` slash command.
455 "project": {
456 // Whether `/project` is enabled.
457 "enabled": false
458 }
459 },
460 // Whether the screen sharing icon is shown in the os status bar.
461 "show_call_status_icon": true,
462 // Whether to use language servers to provide code intelligence.
463 "enable_language_server": true,
464 // Whether to perform linked edits of associated ranges, if the language server supports it.
465 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
466 "linked_edits": true,
467 // The list of language servers to use (or disable) for all languages.
468 //
469 // This is typically customized on a per-language basis.
470 "language_servers": ["..."],
471 // When to automatically save edited buffers. This setting can
472 // take four values.
473 //
474 // 1. Never automatically save:
475 // "autosave": "off",
476 // 2. Save when changing focus away from the Zed window:
477 // "autosave": "on_window_change",
478 // 3. Save when changing focus away from a specific buffer:
479 // "autosave": "on_focus_change",
480 // 4. Save when idle for a certain amount of time:
481 // "autosave": { "after_delay": {"milliseconds": 500} },
482 "autosave": "off",
483 // Settings related to the editor's tab bar.
484 "tab_bar": {
485 // Whether or not to show the tab bar in the editor
486 "show": true,
487 // Whether or not to show the navigation history buttons.
488 "show_nav_history_buttons": true
489 },
490 // Settings related to the editor's tabs
491 "tabs": {
492 // Show git status colors in the editor tabs.
493 "git_status": false,
494 // Position of the close button on the editor tabs.
495 "close_position": "right",
496 // Whether to show the file icon for a tab.
497 "file_icons": false
498 },
499 // Settings related to preview tabs.
500 "preview_tabs": {
501 // Whether preview tabs should be enabled.
502 // Preview tabs allow you to open files in preview mode, where they close automatically
503 // when you switch to another file unless you explicitly pin them.
504 // This is useful for quickly viewing files without cluttering your workspace.
505 "enabled": true,
506 // Whether to open tabs in preview mode when selected from the file finder.
507 "enable_preview_from_file_finder": false,
508 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
509 "enable_preview_from_code_navigation": false
510 },
511 // Settings related to the file finder.
512 "file_finder": {
513 // Whether to show file icons in the file finder.
514 "file_icons": true
515 },
516 // Whether or not to remove any trailing whitespace from lines of a buffer
517 // before saving it.
518 "remove_trailing_whitespace_on_save": true,
519 // Whether to start a new line with a comment when a previous line is a comment as well.
520 "extend_comment_on_newline": true,
521 // Whether or not to ensure there's a single newline at the end of a buffer
522 // when saving it.
523 "ensure_final_newline_on_save": true,
524 // Whether or not to perform a buffer format before saving
525 //
526 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
527 "format_on_save": "on",
528 // How to perform a buffer format. This setting can take 4 values:
529 //
530 // 1. Format code using the current language server:
531 // "formatter": "language_server"
532 // 2. Format code using an external command:
533 // "formatter": {
534 // "external": {
535 // "command": "prettier",
536 // "arguments": ["--stdin-filepath", "{buffer_path}"]
537 // }
538 // }
539 // 3. Format code using Zed's Prettier integration:
540 // "formatter": "prettier"
541 // 4. Default. Format files using Zed's Prettier integration (if applicable),
542 // or falling back to formatting via language server:
543 // "formatter": "auto"
544 "formatter": "auto",
545 // How to soft-wrap long lines of text.
546 // Possible values:
547 //
548 // 1. Prefer a single line generally, unless an overly long line is encountered.
549 // "soft_wrap": "none",
550 // "soft_wrap": "prefer_line", // (deprecated, same as "none")
551 // 2. Soft wrap lines that overflow the editor.
552 // "soft_wrap": "editor_width",
553 // 3. Soft wrap lines at the preferred line length.
554 // "soft_wrap": "preferred_line_length",
555 // 4. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
556 // "soft_wrap": "bounded",
557 "soft_wrap": "none",
558 // The column at which to soft-wrap lines, for buffers where soft-wrap
559 // is enabled.
560 "preferred_line_length": 80,
561 // Whether to indent lines using tab characters, as opposed to multiple
562 // spaces.
563 "hard_tabs": false,
564 // How many columns a tab should occupy.
565 "tab_size": 4,
566 // Control what info is collected by Zed.
567 "telemetry": {
568 // Send debug info like crash reports.
569 "diagnostics": true,
570 // Send anonymized usage data like what languages you're using Zed with.
571 "metrics": true
572 },
573 // Automatically update Zed. This setting may be ignored on Linux if
574 // installed through a package manager.
575 "auto_update": true,
576 // Diagnostics configuration.
577 "diagnostics": {
578 // Whether to show warnings or not by default.
579 "include_warnings": true
580 },
581 // Add files or globs of files that will be excluded by Zed entirely:
582 // they will be skipped during FS scan(s), file tree and file search
583 // will lack the corresponding file entries.
584 "file_scan_exclusions": [
585 "**/.git",
586 "**/.svn",
587 "**/.hg",
588 "**/CVS",
589 "**/.DS_Store",
590 "**/Thumbs.db",
591 "**/.classpath",
592 "**/.settings"
593 ],
594 // Git gutter behavior configuration.
595 "git": {
596 // Control whether the git gutter is shown. May take 2 values:
597 // 1. Show the gutter
598 // "git_gutter": "tracked_files"
599 // 2. Hide the gutter
600 // "git_gutter": "hide"
601 "git_gutter": "tracked_files",
602 // Control whether the git blame information is shown inline,
603 // in the currently focused line.
604 "inline_blame": {
605 "enabled": true
606 // Sets a delay after which the inline blame information is shown.
607 // Delay is restarted with every cursor movement.
608 // "delay_ms": 600
609 }
610 },
611 // Configuration for how direnv configuration should be loaded. May take 2 values:
612 // 1. Load direnv configuration using `direnv export json` directly.
613 // "load_direnv": "direct"
614 // 2. Load direnv configuration through the shell hook, works for POSIX shells and fish.
615 // "load_direnv": "shell_hook"
616 "load_direnv": "direct",
617 "inline_completions": {
618 // A list of globs representing files that inline completions should be disabled for.
619 "disabled_globs": [".env"]
620 },
621 // Settings specific to journaling
622 "journal": {
623 // The path of the directory where journal entries are stored
624 "path": "~",
625 // What format to display the hours in
626 // May take 2 values:
627 // 1. hour12
628 // 2. hour24
629 "hour_format": "hour12"
630 },
631 // Settings specific to the terminal
632 "terminal": {
633 // What shell to use when opening a terminal. May take 3 values:
634 // 1. Use the system's default terminal configuration in /etc/passwd
635 // "shell": "system"
636 // 2. A program:
637 // "shell": {
638 // "program": "sh"
639 // }
640 // 3. A program with arguments:
641 // "shell": {
642 // "with_arguments": {
643 // "program": "/bin/bash",
644 // "args": ["--login"]
645 // }
646 // }
647 "shell": "system",
648 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
649 "dock": "bottom",
650 // Default width when the terminal is docked to the left or right.
651 "default_width": 640,
652 // Default height when the terminal is docked to the bottom.
653 "default_height": 320,
654 // What working directory to use when launching the terminal.
655 // May take 4 values:
656 // 1. Use the current file's project directory. Will Fallback to the
657 // first project directory strategy if unsuccessful
658 // "working_directory": "current_project_directory"
659 // 2. Use the first project in this workspace's directory
660 // "working_directory": "first_project_directory"
661 // 3. Always use this platform's home directory (if we can find it)
662 // "working_directory": "always_home"
663 // 4. Always use a specific directory. This value will be shell expanded.
664 // If this path is not a valid directory the terminal will default to
665 // this platform's home directory (if we can find it)
666 // "working_directory": {
667 // "always": {
668 // "directory": "~/zed/projects/"
669 // }
670 // }
671 "working_directory": "current_project_directory",
672 // Set the cursor blinking behavior in the terminal.
673 // May take 3 values:
674 // 1. Never blink the cursor, ignoring the terminal mode
675 // "blinking": "off",
676 // 2. Default the cursor blink to off, but allow the terminal to
677 // set blinking
678 // "blinking": "terminal_controlled",
679 // 3. Always blink the cursor, ignoring the terminal mode
680 // "blinking": "on",
681 "blinking": "terminal_controlled",
682 // Default cursor shape for the terminal.
683 // 1. A block that surrounds the following character
684 // "block"
685 // 2. A vertical bar
686 // "bar"
687 // 3. An underline that runs along the following character
688 // "underscore"
689 // 4. A box drawn around the following character
690 // "hollow"
691 //
692 // Default: not set, defaults to "block"
693 "cursor_shape": null,
694 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
695 // Alternate Scroll mode converts mouse scroll events into up / down key
696 // presses when in the alternate screen (e.g. when running applications
697 // like vim or less). The terminal can still set and unset this mode.
698 // May take 2 values:
699 // 1. Default alternate scroll mode to on
700 // "alternate_scroll": "on",
701 // 2. Default alternate scroll mode to off
702 // "alternate_scroll": "off",
703 "alternate_scroll": "off",
704 // Set whether the option key behaves as the meta key.
705 // May take 2 values:
706 // 1. Rely on default platform handling of option key, on macOS
707 // this means generating certain unicode characters
708 // "option_to_meta": false,
709 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
710 // "option_to_meta": true,
711 "option_as_meta": true,
712 // Whether or not selecting text in the terminal will automatically
713 // copy to the system clipboard.
714 "copy_on_select": false,
715 // Whether to show the terminal button in the status bar
716 "button": true,
717 // Any key-value pairs added to this list will be added to the terminal's
718 // environment. Use `:` to separate multiple values.
719 "env": {
720 // "KEY": "value1:value2"
721 },
722 // Set the terminal's line height.
723 // May take 3 values:
724 // 1. Use a line height that's comfortable for reading, 1.618
725 // "line_height": "comfortable"
726 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
727 // particularly if they use box characters
728 // "line_height": "standard",
729 // 3. Use a custom line height.
730 // "line_height": {
731 // "custom": 2
732 // },
733 "line_height": "comfortable",
734 // Activate the python virtual environment, if one is found, in the
735 // terminal's working directory (as resolved by the working_directory
736 // setting). Set this to "off" to disable this behavior.
737 "detect_venv": {
738 "on": {
739 // Default directories to search for virtual environments, relative
740 // to the current working directory. We recommend overriding this
741 // in your project's settings, rather than globally.
742 "directories": [".env", "env", ".venv", "venv"],
743 // Can also be `csh`, `fish`, `nushell` and `power_shell`
744 "activate_script": "default"
745 }
746 },
747 "toolbar": {
748 // Whether to display the terminal title in its toolbar.
749 "title": true
750 }
751 // Set the terminal's font size. If this option is not included,
752 // the terminal will default to matching the buffer's font size.
753 // "font_size": 15,
754 // Set the terminal's font family. If this option is not included,
755 // the terminal will default to matching the buffer's font family.
756 // "font_family": "Zed Plex Mono",
757 // Set the terminal's font fallbacks. If this option is not included,
758 // the terminal will default to matching the buffer's font fallbacks.
759 // This will be merged with the platform's default font fallbacks
760 // "font_fallbacks": ["FiraCode Nerd Fonts"],
761 // Sets the maximum number of lines in the terminal's scrollback buffer.
762 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
763 // Existing terminals will not pick up this change until they are recreated.
764 // "max_scroll_history_lines": 10000,
765 },
766 "code_actions_on_format": {},
767 /// Settings related to running tasks.
768 "tasks": {
769 "variables": {}
770 },
771 // An object whose keys are language names, and whose values
772 // are arrays of filenames or extensions of files that should
773 // use those languages.
774 //
775 // For example, to treat files like `foo.notjs` as JavaScript,
776 // and `Embargo.lock` as TOML:
777 //
778 // {
779 // "JavaScript": ["notjs"],
780 // "TOML": ["Embargo.lock"]
781 // }
782 //
783 "file_types": {
784 "Plain Text": ["txt"],
785 "JSON": ["flake.lock"],
786 "JSONC": [
787 "**/.zed/**/*.json",
788 "**/zed/**/*.json",
789 "**/Zed/**/*.json",
790 "tsconfig.json",
791 "pyrightconfig.json"
792 ],
793 "TOML": ["uv.lock"]
794 },
795 /// By default use a recent system version of node, or install our own.
796 /// You can override this to use a version of node that is not in $PATH with:
797 /// {
798 /// "node": {
799 /// "node_path": "/path/to/node"
800 /// "npm_path": "/path/to/npm" (defaults to node_path/../npm)
801 /// }
802 /// }
803 /// or to ensure Zed always downloads and installs an isolated version of node:
804 /// {
805 /// "node": {
806 /// "ignore_system_version": true,
807 /// }
808 /// NOTE: changing this setting currently requires restarting Zed.
809 "node": {},
810 // The extensions that Zed should automatically install on startup.
811 //
812 // If you don't want any of these extensions, add this field to your settings
813 // and change the value to `false`.
814 "auto_install_extensions": {
815 "html": true
816 },
817 // Different settings for specific languages.
818 "languages": {
819 "Astro": {
820 "language_servers": ["astro-language-server", "..."],
821 "prettier": {
822 "allowed": true,
823 "plugins": ["prettier-plugin-astro"]
824 }
825 },
826 "Blade": {
827 "prettier": {
828 "allowed": true
829 }
830 },
831 "C": {
832 "format_on_save": "off",
833 "use_on_type_format": false
834 },
835 "C++": {
836 "format_on_save": "off",
837 "use_on_type_format": false
838 },
839 "CSS": {
840 "prettier": {
841 "allowed": true
842 }
843 },
844 "Dart": {
845 "tab_size": 2
846 },
847 "Elixir": {
848 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
849 },
850 "Erlang": {
851 "language_servers": ["erlang-ls", "!elp", "..."]
852 },
853 "Go": {
854 "code_actions_on_format": {
855 "source.organizeImports": true
856 }
857 },
858 "GraphQL": {
859 "prettier": {
860 "allowed": true
861 }
862 },
863 "HEEX": {
864 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
865 },
866 "HTML": {
867 "prettier": {
868 "allowed": true
869 }
870 },
871 "Java": {
872 "prettier": {
873 "allowed": true,
874 "plugins": ["prettier-plugin-java"]
875 }
876 },
877 "JavaScript": {
878 "language_servers": ["!typescript-language-server", "vtsls", "..."],
879 "prettier": {
880 "allowed": true
881 }
882 },
883 "JSON": {
884 "prettier": {
885 "allowed": true
886 }
887 },
888 "JSONC": {
889 "prettier": {
890 "allowed": true
891 }
892 },
893 "Markdown": {
894 "format_on_save": "off",
895 "use_on_type_format": false,
896 "prettier": {
897 "allowed": true
898 }
899 },
900 "PHP": {
901 "language_servers": ["phpactor", "!intelephense", "..."],
902 "prettier": {
903 "allowed": true,
904 "plugins": ["@prettier/plugin-php"],
905 "parser": "php"
906 }
907 },
908 "Ruby": {
909 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
910 },
911 "SCSS": {
912 "prettier": {
913 "allowed": true
914 }
915 },
916 "SQL": {
917 "prettier": {
918 "allowed": true,
919 "plugins": ["prettier-plugin-sql"]
920 }
921 },
922 "Starlark": {
923 "language_servers": ["starpls", "!buck2-lsp", "..."]
924 },
925 "Svelte": {
926 "language_servers": ["svelte-language-server", "..."],
927 "prettier": {
928 "allowed": true,
929 "plugins": ["prettier-plugin-svelte"]
930 }
931 },
932 "TSX": {
933 "language_servers": ["!typescript-language-server", "vtsls", "..."],
934 "prettier": {
935 "allowed": true
936 }
937 },
938 "Twig": {
939 "prettier": {
940 "allowed": true
941 }
942 },
943 "TypeScript": {
944 "language_servers": ["!typescript-language-server", "vtsls", "..."],
945 "prettier": {
946 "allowed": true
947 }
948 },
949 "Vue.js": {
950 "language_servers": ["vue-language-server", "..."],
951 "prettier": {
952 "allowed": true
953 }
954 },
955 "XML": {
956 "prettier": {
957 "allowed": true,
958 "plugins": ["@prettier/plugin-xml"]
959 }
960 },
961 "YAML": {
962 "prettier": {
963 "allowed": true
964 }
965 }
966 },
967 // Different settings for specific language models.
968 "language_models": {
969 "anthropic": {
970 "version": "1",
971 "api_url": "https://api.anthropic.com"
972 },
973 "google": {
974 "api_url": "https://generativelanguage.googleapis.com"
975 },
976 "ollama": {
977 "api_url": "http://localhost:11434",
978 "low_speed_timeout_in_seconds": 60
979 },
980 "openai": {
981 "version": "1",
982 "api_url": "https://api.openai.com/v1",
983 "low_speed_timeout_in_seconds": 600
984 }
985 },
986 // Zed's Prettier integration settings.
987 // Allows to enable/disable formatting with Prettier
988 // and configure default Prettier, used when no project-level Prettier installation is found.
989 "prettier": {
990 // // Whether to consider prettier formatter or not when attempting to format a file.
991 // "allowed": false,
992 //
993 // // Use regular Prettier json configuration.
994 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
995 // // the project has no other Prettier installed.
996 // "plugins": [],
997 //
998 // // Use regular Prettier json configuration.
999 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1000 // // the project has no other Prettier installed.
1001 // "trailingComma": "es5",
1002 // "tabWidth": 4,
1003 // "semi": false,
1004 // "singleQuote": true
1005 },
1006 // LSP Specific settings.
1007 "lsp": {
1008 // Specify the LSP name as a key here.
1009 // "rust-analyzer": {
1010 // // These initialization options are merged into Zed's defaults
1011 // "initialization_options": {
1012 // "check": {
1013 // "command": "clippy" // rust-analyzer.check.command (default: "check")
1014 // }
1015 // }
1016 // }
1017 },
1018 // Jupyter settings
1019 "jupyter": {
1020 "enabled": true
1021 // Specify the language name as the key and the kernel name as the value.
1022 // "kernel_selections": {
1023 // "python": "conda-base"
1024 // "typescript": "deno"
1025 // }
1026 },
1027 // Vim settings
1028 "vim": {
1029 "toggle_relative_line_numbers": false,
1030 "use_system_clipboard": "always",
1031 "use_multiline_find": false,
1032 "use_smartcase_find": false,
1033 "custom_digraphs": {}
1034 },
1035 // The server to connect to. If the environment variable
1036 // ZED_SERVER_URL is set, it will override this setting.
1037 "server_url": "https://zed.dev",
1038 // Settings overrides to use when using Zed Preview.
1039 // Mostly useful for developers who are managing multiple instances of Zed.
1040 "preview": {
1041 // "theme": "Andromeda"
1042 },
1043 // Settings overrides to use when using Zed Nightly.
1044 // Mostly useful for developers who are managing multiple instances of Zed.
1045 "nightly": {
1046 // "theme": "Andromeda"
1047 },
1048 // Settings overrides to use when using Zed Stable.
1049 // Mostly useful for developers who are managing multiple instances of Zed.
1050 "stable": {
1051 // "theme": "Andromeda"
1052 },
1053 // Settings overrides to use when using Zed Dev.
1054 // Mostly useful for developers who are managing multiple instances of Zed.
1055 "dev": {
1056 // "theme": "Andromeda"
1057 },
1058 // Task-related settings.
1059 "task": {
1060 // Whether to show task status indicator in the status bar. Default: true
1061 "show_status_indicator": true
1062 },
1063 // Whether to show full labels in line indicator or short ones
1064 //
1065 // Values:
1066 // - `short`: "2 s, 15 l, 32 c"
1067 // - `long`: "2 selections, 15 lines, 32 characters"
1068 // Default: long
1069 "line_indicator_format": "long",
1070 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1071 //
1072 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1073 // `socks5h`. `http` will be used when no scheme is specified.
1074 //
1075 // By default no proxy will be used, or Zed will try get proxy settings from
1076 // environment variables.
1077 //
1078 // Examples:
1079 // - "proxy": "socks5h://localhost:10808"
1080 // - "proxy": "http://127.0.0.1:10809"
1081 "proxy": null,
1082 // Set to configure aliases for the command palette.
1083 // When typing a query which is a key of this object, the value will be used instead.
1084 //
1085 // Examples:
1086 // {
1087 // "W": "workspace::Save"
1088 // }
1089 "command_aliases": {},
1090 // ssh_connections is an array of ssh connections.
1091 // By default this setting is null, which disables the direct ssh connection support.
1092 // You can configure these from `project: Open Remote` in the command palette.
1093 // Zed's ssh support will pull configuration from your ~/.ssh too.
1094 // Examples:
1095 // [
1096 // {
1097 // "host": "example-box",
1098 // "projects": [
1099 // {
1100 // "paths": ["/home/user/code/zed"]
1101 // }
1102 // ]
1103 // }
1104 // ]
1105 "ssh_connections": null,
1106 // Configures the Context Server Protocol binaries
1107 //
1108 // Examples:
1109 // {
1110 // "id": "server-1",
1111 // "executable": "/path",
1112 // "args": ['arg1", "args2"]
1113 // }
1114 "experimental.context_servers": {
1115 "servers": []
1116 }
1117}