1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 // The name of a base set of key bindings to use.
14 // This setting can take four values, each named after another
15 // text editor:
16 //
17 // 1. "VSCode"
18 // 2. "Atom"
19 // 3. "JetBrains"
20 // 4. "None"
21 // 5. "SublimeText"
22 // 6. "TextMate"
23 "base_keymap": "VSCode",
24 // Features that can be globally enabled or disabled
25 "features": {
26 // Which inline completion provider to use.
27 "inline_completion_provider": "copilot"
28 },
29 // The name of a font to use for rendering text in the editor
30 "buffer_font_family": "Zed Plex Mono",
31 // Set the buffer text's font fallbacks, this will be merged with
32 // the platform's default fallbacks.
33 "buffer_font_fallbacks": null,
34 // The OpenType features to enable for text in the editor.
35 "buffer_font_features": {
36 // Disable ligatures:
37 // "calt": false
38 },
39 // The default font size for text in the editor
40 "buffer_font_size": 15,
41 // The weight of the editor font in standard CSS units from 100 to 900.
42 "buffer_font_weight": 400,
43 // Set the buffer's line height.
44 // May take 3 values:
45 // 1. Use a line height that's comfortable for reading (1.618)
46 // "buffer_line_height": "comfortable"
47 // 2. Use a standard line height, (1.3)
48 // "buffer_line_height": "standard",
49 // 3. Use a custom line height
50 // "buffer_line_height": {
51 // "custom": 2
52 // },
53 "buffer_line_height": "comfortable",
54 // The name of a font to use for rendering text in the UI
55 // You can set this to ".SystemUIFont" to use the system font
56 "ui_font_family": "Zed Plex Sans",
57 // Set the UI's font fallbacks, this will be merged with the platform's
58 // default font fallbacks.
59 "ui_font_fallbacks": null,
60 // The OpenType features to enable for text in the UI
61 "ui_font_features": {
62 // Disable ligatures:
63 "calt": false
64 },
65 // The weight of the UI font in standard CSS units from 100 to 900.
66 "ui_font_weight": 400,
67 // The default font size for text in the UI
68 "ui_font_size": 16,
69 // How much to fade out unused code.
70 "unnecessary_code_fade": 0.3,
71 // The factor to grow the active pane by. Defaults to 1.0
72 // which gives the same size as all other panes.
73 "active_pane_magnification": 1.0,
74 // The direction that you want to split panes horizontally. Defaults to "up"
75 "pane_split_direction_horizontal": "up",
76 // The direction that you want to split panes horizontally. Defaults to "left"
77 "pane_split_direction_vertical": "left",
78 // Centered layout related settings.
79 "centered_layout": {
80 // The relative width of the left padding of the central pane from the
81 // workspace when the centered layout is used.
82 "left_padding": 0.2,
83 // The relative width of the right padding of the central pane from the
84 // workspace when the centered layout is used.
85 "right_padding": 0.2
86 },
87 // The key to use for adding multiple cursors
88 // Currently "alt" or "cmd_or_ctrl" (also aliased as
89 // "cmd" and "ctrl") are supported.
90 "multi_cursor_modifier": "alt",
91 // Whether to enable vim modes and key bindings.
92 "vim_mode": false,
93 // Whether to show the informational hover box when moving the mouse
94 // over symbols in the editor.
95 "hover_popover_enabled": true,
96 // Whether to confirm before quitting Zed.
97 "confirm_quit": false,
98 // Whether to restore last closed project when fresh Zed instance is opened.
99 "restore_on_startup": "last_session",
100 // Size of the drop target in the editor.
101 "drop_target_size": 0.2,
102 // Whether the window should be closed when using 'close active item' on a window with no tabs.
103 // May take 3 values:
104 // 1. Use the current platform's convention
105 // "when_closing_with_no_tabs": "platform_default"
106 // 2. Always close the window:
107 // "when_closing_with_no_tabs": "close_window",
108 // 3. Never close the window
109 // "when_closing_with_no_tabs": "keep_window_open",
110 "when_closing_with_no_tabs": "platform_default",
111 // Whether to use the system provided dialogs for Open and Save As.
112 // When set to false, Zed will use the built-in keyboard-first pickers.
113 "use_system_path_prompts": true,
114 // Whether the cursor blinks in the editor.
115 "cursor_blink": true,
116 // Cursor shape for the default editor.
117 // 1. A vertical bar
118 // "bar"
119 // 2. A block that surrounds the following character
120 // "block"
121 // 3. An underline / underscore that runs along the following character
122 // "underline"
123 // 4. A box drawn around the following character
124 // "hollow"
125 //
126 // Default: not set, defaults to "bar"
127 "cursor_shape": null,
128 // How to highlight the current line in the editor.
129 //
130 // 1. Don't highlight the current line:
131 // "none"
132 // 2. Highlight the gutter area:
133 // "gutter"
134 // 3. Highlight the editor area:
135 // "line"
136 // 4. Highlight the full line (default):
137 // "all"
138 "current_line_highlight": "all",
139 // Whether to pop the completions menu while typing in an editor without
140 // explicitly requesting it.
141 "show_completions_on_input": true,
142 // Whether to display inline and alongside documentation for items in the
143 // completions menu
144 "show_completion_documentation": true,
145 // The debounce delay before re-querying the language server for completion
146 // documentation when not included in original completion list.
147 "completion_documentation_secondary_query_debounce": 300,
148 // Show method signatures in the editor, when inside parentheses.
149 "auto_signature_help": false,
150 /// Whether to show the signature help after completion or a bracket pair inserted.
151 /// If `auto_signature_help` is enabled, this setting will be treated as enabled also.
152 "show_signature_help_after_edits": true,
153 // Whether to show wrap guides (vertical rulers) in the editor.
154 // Setting this to true will show a guide at the 'preferred_line_length' value
155 // if softwrap is set to 'preferred_line_length', and will show any
156 // additional guides as specified by the 'wrap_guides' setting.
157 "show_wrap_guides": true,
158 // Character counts at which to show wrap guides in the editor.
159 "wrap_guides": [],
160 // Hide the values of in variables from visual display in private files
161 "redact_private_values": false,
162 // The default number of lines to expand excerpts in the multibuffer by.
163 "expand_excerpt_lines": 3,
164 // Globs to match against file paths to determine if a file is private.
165 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
166 // Whether to use additional LSP queries to format (and amend) the code after
167 // every "trigger" symbol input, defined by LSP server capabilities.
168 "use_on_type_format": true,
169 // Whether to automatically add matching closing characters when typing
170 // opening parenthesis, bracket, brace, single or double quote characters.
171 // For example, when you type (, Zed will add a closing ) at the correct position.
172 "use_autoclose": true,
173 // Whether to automatically surround selected text when typing opening parenthesis,
174 // bracket, brace, single or double quote characters.
175 // For example, when you select text and type (, Zed will surround the text with ().
176 "use_auto_surround": true,
177 // Controls how the editor handles the autoclosed characters.
178 // When set to `false`(default), skipping over and auto-removing of the closing characters
179 // happen only for auto-inserted characters.
180 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
181 // no matter how they were inserted.
182 "always_treat_brackets_as_autoclosed": false,
183 // Controls whether inline completions are shown immediately (true)
184 // or manually by triggering `editor::ShowInlineCompletion` (false).
185 "show_inline_completions": true,
186 // Whether to show tabs and spaces in the editor.
187 // This setting can take three values:
188 //
189 // 1. Draw tabs and spaces only for the selected text (default):
190 // "selection"
191 // 2. Do not draw any tabs or spaces:
192 // "none"
193 // 3. Draw all invisible symbols:
194 // "all"
195 // 4. Draw whitespaces at boundaries only:
196 // "boundary"
197 // For a whitespace to be on a boundary, any of the following conditions need to be met:
198 // - It is a tab
199 // - It is adjacent to an edge (start or end)
200 // - It is adjacent to a whitespace (left or right)
201 "show_whitespaces": "selection",
202 // Settings related to calls in Zed
203 "calls": {
204 // Join calls with the microphone live by default
205 "mute_on_join": false,
206 // Share your project when you are the first to join a channel
207 "share_on_join": false
208 },
209 // Toolbar related settings
210 "toolbar": {
211 // Whether to show breadcrumbs.
212 "breadcrumbs": true,
213 // Whether to show quick action buttons.
214 "quick_actions": true,
215 // Whether to show the Selections menu in the editor toolbar
216 "selections_menu": true
217 },
218 // Scrollbar related settings
219 "scrollbar": {
220 // When to show the scrollbar in the editor.
221 // This setting can take four values:
222 //
223 // 1. Show the scrollbar if there's important information or
224 // follow the system's configured behavior (default):
225 // "auto"
226 // 2. Match the system's configured behavior:
227 // "system"
228 // 3. Always show the scrollbar:
229 // "always"
230 // 4. Never show the scrollbar:
231 // "never"
232 "show": "auto",
233 // Whether to show cursor positions in the scrollbar.
234 "cursors": true,
235 // Whether to show git diff indicators in the scrollbar.
236 "git_diff": true,
237 // Whether to show buffer search results in the scrollbar.
238 "search_results": true,
239 // Whether to show selected symbol occurrences in the scrollbar.
240 "selected_symbol": true,
241 // Whether to show diagnostic indicators in the scrollbar.
242 "diagnostics": true
243 },
244 // Enable middle-click paste on Linux.
245 "middle_click_paste": true,
246 // What to do when multibuffer is double clicked in some of its excerpts
247 // (parts of singleton buffers).
248 // May take 2 values:
249 // 1. Behave as a regular buffer and select the whole word (default).
250 // "double_click_in_multibuffer": "select"
251 // 2. Open the excerpt clicked as a new buffer in the new tab.
252 // "double_click_in_multibuffer": "open",
253 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
254 "double_click_in_multibuffer": "select",
255 "gutter": {
256 // Whether to show line numbers in the gutter.
257 "line_numbers": true,
258 // Whether to show code action buttons in the gutter.
259 "code_actions": true,
260 // Whether to show runnables buttons in the gutter.
261 "runnables": true,
262 // Whether to show fold buttons in the gutter.
263 "folds": true
264 },
265 "indent_guides": {
266 /// Whether to show indent guides in the editor.
267 "enabled": true,
268 /// The width of the indent guides in pixels, between 1 and 10.
269 "line_width": 1,
270 /// The width of the active indent guide in pixels, between 1 and 10.
271 "active_line_width": 1,
272 /// Determines how indent guides are colored.
273 /// This setting can take the following three values:
274 ///
275 /// 1. "disabled"
276 /// 2. "fixed"
277 /// 3. "indent_aware"
278 "coloring": "fixed",
279 /// Determines how indent guide backgrounds are colored.
280 /// This setting can take the following two values:
281 ///
282 /// 1. "disabled"
283 /// 2. "indent_aware"
284 "background_coloring": "disabled"
285 },
286 // Whether the editor will scroll beyond the last line.
287 "scroll_beyond_last_line": "one_page",
288 // The number of lines to keep above/below the cursor when scrolling.
289 "vertical_scroll_margin": 3,
290 // Scroll sensitivity multiplier. This multiplier is applied
291 // to both the horizontal and vertical delta values while scrolling.
292 "scroll_sensitivity": 1.0,
293 "relative_line_numbers": false,
294 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
295 "search_wrap": true,
296 // Search options to enable by default when opening new project and buffer searches.
297 "search": {
298 "whole_word": false,
299 "case_sensitive": false,
300 "include_ignored": false,
301 "regex": false
302 },
303 // When to populate a new search's query based on the text under the cursor.
304 // This setting can take the following three values:
305 //
306 // 1. Always populate the search query with the word under the cursor (default).
307 // "always"
308 // 2. Only populate the search query when there is text selected
309 // "selection"
310 // 3. Never populate the search query
311 // "never"
312 "seed_search_query_from_cursor": "always",
313 "use_smartcase_search": false,
314 // Inlay hint related settings
315 "inlay_hints": {
316 // Global switch to toggle hints on and off, switched off by default.
317 "enabled": false,
318 // Toggle certain types of hints on and off, all switched on by default.
319 "show_type_hints": true,
320 "show_parameter_hints": true,
321 // Corresponds to null/None LSP hint type value.
322 "show_other_hints": true,
323 // Whether to show a background for inlay hints.
324 //
325 // If set to `true`, the background will use the `hint.background` color from the current theme.
326 "show_background": false,
327 // Time to wait after editing the buffer, before requesting the hints,
328 // set to 0 to disable debouncing.
329 "edit_debounce_ms": 700,
330 // Time to wait after scrolling the buffer, before requesting the hints,
331 // set to 0 to disable debouncing.
332 "scroll_debounce_ms": 50
333 },
334 "project_panel": {
335 // Whether to show the project panel button in the status bar
336 "button": true,
337 // Default width of the project panel.
338 "default_width": 240,
339 // Where to dock the project panel. Can be 'left' or 'right'.
340 "dock": "left",
341 // Whether to show file icons in the project panel.
342 "file_icons": true,
343 // Whether to show folder icons or chevrons for directories in the project panel.
344 "folder_icons": true,
345 // Whether to show the git status in the project panel.
346 "git_status": true,
347 // Amount of indentation for nested items.
348 "indent_size": 20,
349 // Whether to reveal it in the project panel automatically,
350 // when a corresponding project entry becomes active.
351 // Gitignored entries are never auto revealed.
352 "auto_reveal_entries": true,
353 // Whether to fold directories automatically and show compact folders
354 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
355 "auto_fold_dirs": true,
356 /// Scrollbar-related settings
357 "scrollbar": {
358 /// When to show the scrollbar in the project panel.
359 /// This setting can take four values:
360 ///
361 /// 1. null (default): Inherit editor settings
362 /// 2. Show the scrollbar if there's important information or
363 /// follow the system's configured behavior (default):
364 /// "auto"
365 /// 3. Match the system's configured behavior:
366 /// "system"
367 /// 4. Always show the scrollbar:
368 /// "always"
369 /// 5. Never show the scrollbar:
370 /// "never"
371 "show": null
372 },
373 // Settings related to indent guides in the project panel.
374 "indent_guides": {
375 // When to show indent guides in the project panel.
376 // This setting can take two values:
377 //
378 // 1. Always show indent guides:
379 // "always"
380 // 2. Never show indent guides:
381 // "never"
382 "show": "always"
383 }
384 },
385 "outline_panel": {
386 // Whether to show the outline panel button in the status bar
387 "button": true,
388 // Default width of the outline panel.
389 "default_width": 300,
390 // Where to dock the outline panel. Can be 'left' or 'right'.
391 "dock": "left",
392 // Whether to show file icons in the outline panel.
393 "file_icons": true,
394 // Whether to show folder icons or chevrons for directories in the outline panel.
395 "folder_icons": true,
396 // Whether to show the git status in the outline panel.
397 "git_status": true,
398 // Amount of indentation for nested items.
399 "indent_size": 20,
400 // Whether to reveal it in the outline panel automatically,
401 // when a corresponding outline entry becomes active.
402 // Gitignored entries are never auto revealed.
403 "auto_reveal_entries": true,
404 /// Whether to fold directories automatically
405 /// when a directory has only one directory inside.
406 "auto_fold_dirs": true,
407 // Settings related to indent guides in the outline panel.
408 "indent_guides": {
409 // When to show indent guides in the outline panel.
410 // This setting can take two values:
411 //
412 // 1. Always show indent guides:
413 // "always"
414 // 2. Never show indent guides:
415 // "never"
416 "show": "always"
417 }
418 },
419 "collaboration_panel": {
420 // Whether to show the collaboration panel button in the status bar.
421 "button": true,
422 // Where to dock the collaboration panel. Can be 'left' or 'right'.
423 "dock": "left",
424 // Default width of the collaboration panel.
425 "default_width": 240
426 },
427 "chat_panel": {
428 // Whether to show the chat panel button in the status bar.
429 "button": true,
430 // Where to the chat panel. Can be 'left' or 'right'.
431 "dock": "right",
432 // Default width of the chat panel.
433 "default_width": 240
434 },
435 "message_editor": {
436 // Whether to automatically replace emoji shortcodes with emoji characters.
437 // For example: typing `:wave:` gets replaced with `👋`.
438 "auto_replace_emoji_shortcode": true
439 },
440 "notification_panel": {
441 // Whether to show the notification panel button in the status bar.
442 "button": true,
443 // Where to dock the notification panel. Can be 'left' or 'right'.
444 "dock": "right",
445 // Default width of the notification panel.
446 "default_width": 380
447 },
448 "assistant": {
449 // Version of this setting.
450 "version": "2",
451 // Whether the assistant is enabled.
452 "enabled": true,
453 // Whether to show the assistant panel button in the status bar.
454 "button": true,
455 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
456 "dock": "right",
457 // Default width when the assistant is docked to the left or right.
458 "default_width": 640,
459 // Default height when the assistant is docked to the bottom.
460 "default_height": 320,
461 // The default model to use when creating new contexts.
462 "default_model": {
463 // The provider to use.
464 "provider": "zed.dev",
465 // The model to use.
466 "model": "claude-3-5-sonnet"
467 }
468 },
469 // The settings for slash commands.
470 "slash_commands": {
471 // Settings for the `/docs` slash command.
472 "docs": {
473 // Whether `/docs` is enabled.
474 "enabled": false
475 },
476 // Settings for the `/project` slash command.
477 "project": {
478 // Whether `/project` is enabled.
479 "enabled": false
480 }
481 },
482 // Whether the screen sharing icon is shown in the os status bar.
483 "show_call_status_icon": true,
484 // Whether to use language servers to provide code intelligence.
485 "enable_language_server": true,
486 // Whether to perform linked edits of associated ranges, if the language server supports it.
487 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
488 "linked_edits": true,
489 // The list of language servers to use (or disable) for all languages.
490 //
491 // This is typically customized on a per-language basis.
492 "language_servers": ["..."],
493 // When to automatically save edited buffers. This setting can
494 // take four values.
495 //
496 // 1. Never automatically save:
497 // "autosave": "off",
498 // 2. Save when changing focus away from the Zed window:
499 // "autosave": "on_window_change",
500 // 3. Save when changing focus away from a specific buffer:
501 // "autosave": "on_focus_change",
502 // 4. Save when idle for a certain amount of time:
503 // "autosave": { "after_delay": {"milliseconds": 500} },
504 "autosave": "off",
505 // Settings related to the editor's tab bar.
506 "tab_bar": {
507 // Whether or not to show the tab bar in the editor
508 "show": true,
509 // Whether or not to show the navigation history buttons.
510 "show_nav_history_buttons": true
511 },
512 // Settings related to the editor's tabs
513 "tabs": {
514 // Show git status colors in the editor tabs.
515 "git_status": false,
516 // Position of the close button on the editor tabs.
517 "close_position": "right",
518 // Whether to show the file icon for a tab.
519 "file_icons": false,
520 // What to do after closing the current tab.
521 //
522 // 1. Activate the tab that was open previously (default)
523 // "History"
524 // 2. Activate the neighbour tab (prefers the right one, if present)
525 // "Neighbour"
526 "activate_on_close": "history"
527 },
528 // Settings related to preview tabs.
529 "preview_tabs": {
530 // Whether preview tabs should be enabled.
531 // Preview tabs allow you to open files in preview mode, where they close automatically
532 // when you switch to another file unless you explicitly pin them.
533 // This is useful for quickly viewing files without cluttering your workspace.
534 "enabled": true,
535 // Whether to open tabs in preview mode when selected from the file finder.
536 "enable_preview_from_file_finder": false,
537 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
538 "enable_preview_from_code_navigation": false
539 },
540 // Settings related to the file finder.
541 "file_finder": {
542 // Whether to show file icons in the file finder.
543 "file_icons": true
544 },
545 // Whether or not to remove any trailing whitespace from lines of a buffer
546 // before saving it.
547 "remove_trailing_whitespace_on_save": true,
548 // Whether to start a new line with a comment when a previous line is a comment as well.
549 "extend_comment_on_newline": true,
550 // Whether or not to ensure there's a single newline at the end of a buffer
551 // when saving it.
552 "ensure_final_newline_on_save": true,
553 // Whether or not to perform a buffer format before saving
554 //
555 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
556 "format_on_save": "on",
557 // How to perform a buffer format. This setting can take 4 values:
558 //
559 // 1. Format code using the current language server:
560 // "formatter": "language_server"
561 // 2. Format code using an external command:
562 // "formatter": {
563 // "external": {
564 // "command": "prettier",
565 // "arguments": ["--stdin-filepath", "{buffer_path}"]
566 // }
567 // }
568 // 3. Format code using Zed's Prettier integration:
569 // "formatter": "prettier"
570 // 4. Default. Format files using Zed's Prettier integration (if applicable),
571 // or falling back to formatting via language server:
572 // "formatter": "auto"
573 "formatter": "auto",
574 // How to soft-wrap long lines of text.
575 // Possible values:
576 //
577 // 1. Prefer a single line generally, unless an overly long line is encountered.
578 // "soft_wrap": "none",
579 // "soft_wrap": "prefer_line", // (deprecated, same as "none")
580 // 2. Soft wrap lines that overflow the editor.
581 // "soft_wrap": "editor_width",
582 // 3. Soft wrap lines at the preferred line length.
583 // "soft_wrap": "preferred_line_length",
584 // 4. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
585 // "soft_wrap": "bounded",
586 "soft_wrap": "none",
587 // The column at which to soft-wrap lines, for buffers where soft-wrap
588 // is enabled.
589 "preferred_line_length": 80,
590 // Whether to indent lines using tab characters, as opposed to multiple
591 // spaces.
592 "hard_tabs": false,
593 // How many columns a tab should occupy.
594 "tab_size": 4,
595 // Control what info is collected by Zed.
596 "telemetry": {
597 // Send debug info like crash reports.
598 "diagnostics": true,
599 // Send anonymized usage data like what languages you're using Zed with.
600 "metrics": true
601 },
602 // Automatically update Zed. This setting may be ignored on Linux if
603 // installed through a package manager.
604 "auto_update": true,
605 // Diagnostics configuration.
606 "diagnostics": {
607 // Whether to show warnings or not by default.
608 "include_warnings": true
609 },
610 // Add files or globs of files that will be excluded by Zed entirely:
611 // they will be skipped during FS scan(s), file tree and file search
612 // will lack the corresponding file entries.
613 "file_scan_exclusions": [
614 "**/.git",
615 "**/.svn",
616 "**/.hg",
617 "**/CVS",
618 "**/.DS_Store",
619 "**/Thumbs.db",
620 "**/.classpath",
621 "**/.settings"
622 ],
623 // Git gutter behavior configuration.
624 "git": {
625 // Control whether the git gutter is shown. May take 2 values:
626 // 1. Show the gutter
627 // "git_gutter": "tracked_files"
628 // 2. Hide the gutter
629 // "git_gutter": "hide"
630 "git_gutter": "tracked_files",
631 // Control whether the git blame information is shown inline,
632 // in the currently focused line.
633 "inline_blame": {
634 "enabled": true
635 // Sets a delay after which the inline blame information is shown.
636 // Delay is restarted with every cursor movement.
637 // "delay_ms": 600
638 }
639 },
640 // Configuration for how direnv configuration should be loaded. May take 2 values:
641 // 1. Load direnv configuration using `direnv export json` directly.
642 // "load_direnv": "direct"
643 // 2. Load direnv configuration through the shell hook, works for POSIX shells and fish.
644 // "load_direnv": "shell_hook"
645 "load_direnv": "direct",
646 "inline_completions": {
647 // A list of globs representing files that inline completions should be disabled for.
648 "disabled_globs": [".env"]
649 },
650 // Settings specific to journaling
651 "journal": {
652 // The path of the directory where journal entries are stored
653 "path": "~",
654 // What format to display the hours in
655 // May take 2 values:
656 // 1. hour12
657 // 2. hour24
658 "hour_format": "hour12"
659 },
660 // Settings specific to the terminal
661 "terminal": {
662 // What shell to use when opening a terminal. May take 3 values:
663 // 1. Use the system's default terminal configuration in /etc/passwd
664 // "shell": "system"
665 // 2. A program:
666 // "shell": {
667 // "program": "sh"
668 // }
669 // 3. A program with arguments:
670 // "shell": {
671 // "with_arguments": {
672 // "program": "/bin/bash",
673 // "args": ["--login"]
674 // }
675 // }
676 "shell": "system",
677 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
678 "dock": "bottom",
679 // Default width when the terminal is docked to the left or right.
680 "default_width": 640,
681 // Default height when the terminal is docked to the bottom.
682 "default_height": 320,
683 // What working directory to use when launching the terminal.
684 // May take 4 values:
685 // 1. Use the current file's project directory. Will Fallback to the
686 // first project directory strategy if unsuccessful
687 // "working_directory": "current_project_directory"
688 // 2. Use the first project in this workspace's directory
689 // "working_directory": "first_project_directory"
690 // 3. Always use this platform's home directory (if we can find it)
691 // "working_directory": "always_home"
692 // 4. Always use a specific directory. This value will be shell expanded.
693 // If this path is not a valid directory the terminal will default to
694 // this platform's home directory (if we can find it)
695 // "working_directory": {
696 // "always": {
697 // "directory": "~/zed/projects/"
698 // }
699 // }
700 "working_directory": "current_project_directory",
701 // Set the cursor blinking behavior in the terminal.
702 // May take 3 values:
703 // 1. Never blink the cursor, ignoring the terminal mode
704 // "blinking": "off",
705 // 2. Default the cursor blink to off, but allow the terminal to
706 // set blinking
707 // "blinking": "terminal_controlled",
708 // 3. Always blink the cursor, ignoring the terminal mode
709 // "blinking": "on",
710 "blinking": "terminal_controlled",
711 // Default cursor shape for the terminal.
712 // 1. A block that surrounds the following character
713 // "block"
714 // 2. A vertical bar
715 // "bar"
716 // 3. An underline / underscore that runs along the following character
717 // "underline"
718 // 4. A box drawn around the following character
719 // "hollow"
720 //
721 // Default: not set, defaults to "block"
722 "cursor_shape": null,
723 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
724 // Alternate Scroll mode converts mouse scroll events into up / down key
725 // presses when in the alternate screen (e.g. when running applications
726 // like vim or less). The terminal can still set and unset this mode.
727 // May take 2 values:
728 // 1. Default alternate scroll mode to on
729 // "alternate_scroll": "on",
730 // 2. Default alternate scroll mode to off
731 // "alternate_scroll": "off",
732 "alternate_scroll": "off",
733 // Set whether the option key behaves as the meta key.
734 // May take 2 values:
735 // 1. Rely on default platform handling of option key, on macOS
736 // this means generating certain unicode characters
737 // "option_as_meta": false,
738 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
739 // "option_as_meta": true,
740 "option_as_meta": false,
741 // Whether or not selecting text in the terminal will automatically
742 // copy to the system clipboard.
743 "copy_on_select": false,
744 // Whether to show the terminal button in the status bar
745 "button": true,
746 // Any key-value pairs added to this list will be added to the terminal's
747 // environment. Use `:` to separate multiple values.
748 "env": {
749 // "KEY": "value1:value2"
750 },
751 // Set the terminal's line height.
752 // May take 3 values:
753 // 1. Use a line height that's comfortable for reading, 1.618
754 // "line_height": "comfortable"
755 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
756 // particularly if they use box characters
757 // "line_height": "standard",
758 // 3. Use a custom line height.
759 // "line_height": {
760 // "custom": 2
761 // },
762 "line_height": "comfortable",
763 // Activate the python virtual environment, if one is found, in the
764 // terminal's working directory (as resolved by the working_directory
765 // setting). Set this to "off" to disable this behavior.
766 "detect_venv": {
767 "on": {
768 // Default directories to search for virtual environments, relative
769 // to the current working directory. We recommend overriding this
770 // in your project's settings, rather than globally.
771 "directories": [".env", "env", ".venv", "venv"],
772 // Can also be `csh`, `fish`, `nushell` and `power_shell`
773 "activate_script": "default"
774 }
775 },
776 "toolbar": {
777 // Whether to display the terminal title in its toolbar.
778 "title": true
779 }
780 // Set the terminal's font size. If this option is not included,
781 // the terminal will default to matching the buffer's font size.
782 // "font_size": 15,
783 // Set the terminal's font family. If this option is not included,
784 // the terminal will default to matching the buffer's font family.
785 // "font_family": "Zed Plex Mono",
786 // Set the terminal's font fallbacks. If this option is not included,
787 // the terminal will default to matching the buffer's font fallbacks.
788 // This will be merged with the platform's default font fallbacks
789 // "font_fallbacks": ["FiraCode Nerd Fonts"],
790 // Sets the maximum number of lines in the terminal's scrollback buffer.
791 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
792 // Existing terminals will not pick up this change until they are recreated.
793 // "max_scroll_history_lines": 10000,
794 },
795 "code_actions_on_format": {},
796 /// Settings related to running tasks.
797 "tasks": {
798 "variables": {}
799 },
800 "toolchain": { "name": "default", "path": "default" },
801 // An object whose keys are language names, and whose values
802 // are arrays of filenames or extensions of files that should
803 // use those languages.
804 //
805 // For example, to treat files like `foo.notjs` as JavaScript,
806 // and `Embargo.lock` as TOML:
807 //
808 // {
809 // "JavaScript": ["notjs"],
810 // "TOML": ["Embargo.lock"]
811 // }
812 //
813 "file_types": {
814 "Plain Text": ["txt"],
815 "JSON": ["flake.lock"],
816 "JSONC": [
817 "**/.zed/**/*.json",
818 "**/zed/**/*.json",
819 "**/Zed/**/*.json",
820 "tsconfig.json",
821 "pyrightconfig.json"
822 ],
823 "TOML": ["uv.lock"]
824 },
825 /// By default use a recent system version of node, or install our own.
826 /// You can override this to use a version of node that is not in $PATH with:
827 /// {
828 /// "node": {
829 /// "path": "/path/to/node"
830 /// "npm_path": "/path/to/npm" (defaults to node_path/../npm)
831 /// }
832 /// }
833 /// or to ensure Zed always downloads and installs an isolated version of node:
834 /// {
835 /// "node": {
836 /// "ignore_system_version": true,
837 /// }
838 /// NOTE: changing this setting currently requires restarting Zed.
839 "node": {},
840 // The extensions that Zed should automatically install on startup.
841 //
842 // If you don't want any of these extensions, add this field to your settings
843 // and change the value to `false`.
844 "auto_install_extensions": {
845 "html": true
846 },
847 // Different settings for specific languages.
848 "languages": {
849 "Astro": {
850 "language_servers": ["astro-language-server", "..."],
851 "prettier": {
852 "allowed": true,
853 "plugins": ["prettier-plugin-astro"]
854 }
855 },
856 "Blade": {
857 "prettier": {
858 "allowed": true
859 }
860 },
861 "C": {
862 "format_on_save": "off",
863 "use_on_type_format": false
864 },
865 "C++": {
866 "format_on_save": "off",
867 "use_on_type_format": false
868 },
869 "CSS": {
870 "prettier": {
871 "allowed": true
872 }
873 },
874 "Dart": {
875 "tab_size": 2
876 },
877 "Diff": {
878 "remove_trailing_whitespace_on_save": false,
879 "ensure_final_newline_on_save": false
880 },
881 "Elixir": {
882 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
883 },
884 "Erlang": {
885 "language_servers": ["erlang-ls", "!elp", "..."]
886 },
887 "Go": {
888 "code_actions_on_format": {
889 "source.organizeImports": true
890 }
891 },
892 "GraphQL": {
893 "prettier": {
894 "allowed": true
895 }
896 },
897 "HEEX": {
898 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
899 },
900 "HTML": {
901 "prettier": {
902 "allowed": true
903 }
904 },
905 "Java": {
906 "prettier": {
907 "allowed": true,
908 "plugins": ["prettier-plugin-java"]
909 }
910 },
911 "JavaScript": {
912 "language_servers": ["!typescript-language-server", "vtsls", "..."],
913 "prettier": {
914 "allowed": true
915 }
916 },
917 "JSON": {
918 "prettier": {
919 "allowed": true
920 }
921 },
922 "JSONC": {
923 "prettier": {
924 "allowed": true
925 }
926 },
927 "Markdown": {
928 "format_on_save": "off",
929 "use_on_type_format": false,
930 "prettier": {
931 "allowed": true
932 }
933 },
934 "PHP": {
935 "language_servers": ["phpactor", "!intelephense", "..."],
936 "prettier": {
937 "allowed": true,
938 "plugins": ["@prettier/plugin-php"],
939 "parser": "php"
940 }
941 },
942 "Ruby": {
943 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
944 },
945 "SCSS": {
946 "prettier": {
947 "allowed": true
948 }
949 },
950 "SQL": {
951 "prettier": {
952 "allowed": true,
953 "plugins": ["prettier-plugin-sql"]
954 }
955 },
956 "Starlark": {
957 "language_servers": ["starpls", "!buck2-lsp", "..."]
958 },
959 "Svelte": {
960 "language_servers": ["svelte-language-server", "..."],
961 "prettier": {
962 "allowed": true,
963 "plugins": ["prettier-plugin-svelte"]
964 }
965 },
966 "TSX": {
967 "language_servers": ["!typescript-language-server", "vtsls", "..."],
968 "prettier": {
969 "allowed": true
970 }
971 },
972 "Twig": {
973 "prettier": {
974 "allowed": true
975 }
976 },
977 "TypeScript": {
978 "language_servers": ["!typescript-language-server", "vtsls", "..."],
979 "prettier": {
980 "allowed": true
981 }
982 },
983 "Vue.js": {
984 "language_servers": ["vue-language-server", "..."],
985 "prettier": {
986 "allowed": true
987 }
988 },
989 "XML": {
990 "prettier": {
991 "allowed": true,
992 "plugins": ["@prettier/plugin-xml"]
993 }
994 },
995 "YAML": {
996 "prettier": {
997 "allowed": true
998 }
999 }
1000 },
1001 // Different settings for specific language models.
1002 "language_models": {
1003 "anthropic": {
1004 "version": "1",
1005 "api_url": "https://api.anthropic.com"
1006 },
1007 "google": {
1008 "api_url": "https://generativelanguage.googleapis.com"
1009 },
1010 "ollama": {
1011 "api_url": "http://localhost:11434",
1012 "low_speed_timeout_in_seconds": 60
1013 },
1014 "openai": {
1015 "version": "1",
1016 "api_url": "https://api.openai.com/v1",
1017 "low_speed_timeout_in_seconds": 600
1018 }
1019 },
1020 // Zed's Prettier integration settings.
1021 // Allows to enable/disable formatting with Prettier
1022 // and configure default Prettier, used when no project-level Prettier installation is found.
1023 "prettier": {
1024 // // Whether to consider prettier formatter or not when attempting to format a file.
1025 // "allowed": false,
1026 //
1027 // // Use regular Prettier json configuration.
1028 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1029 // // the project has no other Prettier installed.
1030 // "plugins": [],
1031 //
1032 // // Use regular Prettier json configuration.
1033 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1034 // // the project has no other Prettier installed.
1035 // "trailingComma": "es5",
1036 // "tabWidth": 4,
1037 // "semi": false,
1038 // "singleQuote": true
1039 },
1040 // LSP Specific settings.
1041 "lsp": {
1042 // Specify the LSP name as a key here.
1043 // "rust-analyzer": {
1044 // // These initialization options are merged into Zed's defaults
1045 // "initialization_options": {
1046 // "check": {
1047 // "command": "clippy" // rust-analyzer.check.command (default: "check")
1048 // }
1049 // }
1050 // }
1051 },
1052 // Jupyter settings
1053 "jupyter": {
1054 "enabled": true
1055 // Specify the language name as the key and the kernel name as the value.
1056 // "kernel_selections": {
1057 // "python": "conda-base"
1058 // "typescript": "deno"
1059 // }
1060 },
1061 // Vim settings
1062 "vim": {
1063 "toggle_relative_line_numbers": false,
1064 "use_system_clipboard": "always",
1065 "use_multiline_find": false,
1066 "use_smartcase_find": false,
1067 "custom_digraphs": {}
1068 },
1069 // The server to connect to. If the environment variable
1070 // ZED_SERVER_URL is set, it will override this setting.
1071 "server_url": "https://zed.dev",
1072 // Settings overrides to use when using Zed Preview.
1073 // Mostly useful for developers who are managing multiple instances of Zed.
1074 "preview": {
1075 // "theme": "Andromeda"
1076 },
1077 // Settings overrides to use when using Zed Nightly.
1078 // Mostly useful for developers who are managing multiple instances of Zed.
1079 "nightly": {
1080 // "theme": "Andromeda"
1081 },
1082 // Settings overrides to use when using Zed Stable.
1083 // Mostly useful for developers who are managing multiple instances of Zed.
1084 "stable": {
1085 // "theme": "Andromeda"
1086 },
1087 // Settings overrides to use when using Zed Dev.
1088 // Mostly useful for developers who are managing multiple instances of Zed.
1089 "dev": {
1090 // "theme": "Andromeda"
1091 },
1092 // Task-related settings.
1093 "task": {
1094 // Whether to show task status indicator in the status bar. Default: true
1095 "show_status_indicator": true
1096 },
1097 // Whether to show full labels in line indicator or short ones
1098 //
1099 // Values:
1100 // - `short`: "2 s, 15 l, 32 c"
1101 // - `long`: "2 selections, 15 lines, 32 characters"
1102 // Default: long
1103 "line_indicator_format": "long",
1104 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1105 //
1106 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1107 // `socks5h`. `http` will be used when no scheme is specified.
1108 //
1109 // By default no proxy will be used, or Zed will try get proxy settings from
1110 // environment variables.
1111 //
1112 // Examples:
1113 // - "proxy": "socks5h://localhost:10808"
1114 // - "proxy": "http://127.0.0.1:10809"
1115 "proxy": null,
1116 // Set to configure aliases for the command palette.
1117 // When typing a query which is a key of this object, the value will be used instead.
1118 //
1119 // Examples:
1120 // {
1121 // "W": "workspace::Save"
1122 // }
1123 "command_aliases": {},
1124 // ssh_connections is an array of ssh connections.
1125 // You can configure these from `project: Open Remote` in the command palette.
1126 // Zed's ssh support will pull configuration from your ~/.ssh too.
1127 // Examples:
1128 // [
1129 // {
1130 // "host": "example-box",
1131 // // "port": 22, "username": "test", "args": ["-i", "/home/user/.ssh/id_rsa"]
1132 // "projects": [
1133 // {
1134 // "paths": ["/home/user/code/zed"]
1135 // }
1136 // ]
1137 // }
1138 // ]
1139 "ssh_connections": [],
1140 // Configures the Context Server Protocol binaries
1141 //
1142 // Examples:
1143 // {
1144 // "id": "server-1",
1145 // "executable": "/path",
1146 // "args": ['arg1", "args2"]
1147 // }
1148 "experimental.context_servers": {
1149 "servers": []
1150 }
1151}