1{
2 // The name of the Zed theme to use for the UI.
3 //
4 // `mode` is one of:
5 // - "system": Use the theme that corresponds to the system's appearance
6 // - "light": Use the theme indicated by the "light" field
7 // - "dark": Use the theme indicated by the "dark" field
8 "theme": {
9 "mode": "system",
10 "light": "One Light",
11 "dark": "One Dark"
12 },
13 // The name of a base set of key bindings to use.
14 // This setting can take four values, each named after another
15 // text editor:
16 //
17 // 1. "VSCode"
18 // 2. "Atom"
19 // 3. "JetBrains"
20 // 4. "None"
21 // 5. "SublimeText"
22 // 6. "TextMate"
23 "base_keymap": "VSCode",
24 // Features that can be globally enabled or disabled
25 "features": {
26 // Which inline completion provider to use.
27 "inline_completion_provider": "copilot"
28 },
29 // The name of a font to use for rendering text in the editor
30 "buffer_font_family": "Zed Plex Mono",
31 // Set the buffer text's font fallbacks, this will be merged with
32 // the platform's default fallbacks.
33 "buffer_font_fallbacks": null,
34 // The OpenType features to enable for text in the editor.
35 "buffer_font_features": {
36 // Disable ligatures:
37 // "calt": false
38 },
39 // The default font size for text in the editor
40 "buffer_font_size": 15,
41 // The weight of the editor font in standard CSS units from 100 to 900.
42 "buffer_font_weight": 400,
43 // Set the buffer's line height.
44 // May take 3 values:
45 // 1. Use a line height that's comfortable for reading (1.618)
46 // "buffer_line_height": "comfortable"
47 // 2. Use a standard line height, (1.3)
48 // "buffer_line_height": "standard",
49 // 3. Use a custom line height
50 // "buffer_line_height": {
51 // "custom": 2
52 // },
53 "buffer_line_height": "comfortable",
54 // The name of a font to use for rendering text in the UI
55 // You can set this to ".SystemUIFont" to use the system font
56 "ui_font_family": "Zed Plex Sans",
57 // Set the UI's font fallbacks, this will be merged with the platform's
58 // default font fallbacks.
59 "ui_font_fallbacks": null,
60 // The OpenType features to enable for text in the UI
61 "ui_font_features": {
62 // Disable ligatures:
63 "calt": false
64 },
65 // The weight of the UI font in standard CSS units from 100 to 900.
66 "ui_font_weight": 400,
67 // The default font size for text in the UI
68 "ui_font_size": 16,
69 // How much to fade out unused code.
70 "unnecessary_code_fade": 0.3,
71 // Active pane styling settings.
72 "active_pane_modifiers": {
73 // The factor to grow the active pane by. Defaults to 1.0
74 // which gives the same size as all other panes.
75 "magnification": 1.0,
76 // Inset border size of the active pane, in pixels.
77 "border_size": 0.0,
78 // Opacity of the inactive panes. 0 means transparent, 1 means opaque.
79 // Values are clamped to the [0.0, 1.0] range.
80 "inactive_opacity": 1.0
81 },
82 // The direction that you want to split panes horizontally. Defaults to "up"
83 "pane_split_direction_horizontal": "up",
84 // The direction that you want to split panes horizontally. Defaults to "left"
85 "pane_split_direction_vertical": "left",
86 // Centered layout related settings.
87 "centered_layout": {
88 // The relative width of the left padding of the central pane from the
89 // workspace when the centered layout is used.
90 "left_padding": 0.2,
91 // The relative width of the right padding of the central pane from the
92 // workspace when the centered layout is used.
93 "right_padding": 0.2
94 },
95 // The key to use for adding multiple cursors
96 // Currently "alt" or "cmd_or_ctrl" (also aliased as
97 // "cmd" and "ctrl") are supported.
98 "multi_cursor_modifier": "alt",
99 // Whether to enable vim modes and key bindings.
100 "vim_mode": false,
101 // Whether to show the informational hover box when moving the mouse
102 // over symbols in the editor.
103 "hover_popover_enabled": true,
104 // Time to wait before showing the informational hover box
105 "hover_popover_delay": 350,
106 // Whether to confirm before quitting Zed.
107 "confirm_quit": false,
108 // Whether to restore last closed project when fresh Zed instance is opened.
109 "restore_on_startup": "last_session",
110 // Size of the drop target in the editor.
111 "drop_target_size": 0.2,
112 // Whether the window should be closed when using 'close active item' on a window with no tabs.
113 // May take 3 values:
114 // 1. Use the current platform's convention
115 // "when_closing_with_no_tabs": "platform_default"
116 // 2. Always close the window:
117 // "when_closing_with_no_tabs": "close_window",
118 // 3. Never close the window
119 // "when_closing_with_no_tabs": "keep_window_open",
120 "when_closing_with_no_tabs": "platform_default",
121 // Whether to use the system provided dialogs for Open and Save As.
122 // When set to false, Zed will use the built-in keyboard-first pickers.
123 "use_system_path_prompts": true,
124 // Whether the cursor blinks in the editor.
125 "cursor_blink": true,
126 // Cursor shape for the default editor.
127 // 1. A vertical bar
128 // "bar"
129 // 2. A block that surrounds the following character
130 // "block"
131 // 3. An underline / underscore that runs along the following character
132 // "underline"
133 // 4. A box drawn around the following character
134 // "hollow"
135 //
136 // Default: not set, defaults to "bar"
137 "cursor_shape": null,
138 // How to highlight the current line in the editor.
139 //
140 // 1. Don't highlight the current line:
141 // "none"
142 // 2. Highlight the gutter area:
143 // "gutter"
144 // 3. Highlight the editor area:
145 // "line"
146 // 4. Highlight the full line (default):
147 // "all"
148 "current_line_highlight": "all",
149 // The debounce delay before querying highlights from the language
150 // server based on the current cursor location.
151 "lsp_highlight_debounce": 75,
152 // Whether to pop the completions menu while typing in an editor without
153 // explicitly requesting it.
154 "show_completions_on_input": true,
155 // Whether to display inline and alongside documentation for items in the
156 // completions menu
157 "show_completion_documentation": true,
158 // Show method signatures in the editor, when inside parentheses.
159 "auto_signature_help": false,
160 /// Whether to show the signature help after completion or a bracket pair inserted.
161 /// If `auto_signature_help` is enabled, this setting will be treated as enabled also.
162 "show_signature_help_after_edits": false,
163 /// Whether to show the inline completions next to the completions provided by a language server.
164 /// Only has an effect if inline completion provider supports it.
165 "show_inline_completions_in_menu": true,
166 // Whether to show wrap guides (vertical rulers) in the editor.
167 // Setting this to true will show a guide at the 'preferred_line_length' value
168 // if 'soft_wrap' is set to 'preferred_line_length', and will show any
169 // additional guides as specified by the 'wrap_guides' setting.
170 "show_wrap_guides": true,
171 // Character counts at which to show wrap guides in the editor.
172 "wrap_guides": [],
173 // Hide the values of in variables from visual display in private files
174 "redact_private_values": false,
175 // The default number of lines to expand excerpts in the multibuffer by.
176 "expand_excerpt_lines": 3,
177 // Globs to match against file paths to determine if a file is private.
178 "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
179 // Whether to use additional LSP queries to format (and amend) the code after
180 // every "trigger" symbol input, defined by LSP server capabilities.
181 "use_on_type_format": true,
182 // Whether to automatically add matching closing characters when typing
183 // opening parenthesis, bracket, brace, single or double quote characters.
184 // For example, when you type (, Zed will add a closing ) at the correct position.
185 "use_autoclose": true,
186 // Whether to automatically surround selected text when typing opening parenthesis,
187 // bracket, brace, single or double quote characters.
188 // For example, when you select text and type (, Zed will surround the text with ().
189 "use_auto_surround": true,
190 // Whether indentation of pasted content should be adjusted based on the context.
191 "auto_indent_on_paste": true,
192 // Controls how the editor handles the autoclosed characters.
193 // When set to `false`(default), skipping over and auto-removing of the closing characters
194 // happen only for auto-inserted characters.
195 // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
196 // no matter how they were inserted.
197 "always_treat_brackets_as_autoclosed": false,
198 // Controls whether inline completions are shown immediately (true)
199 // or manually by triggering `editor::ShowInlineCompletion` (false).
200 "show_inline_completions": true,
201 // Controls whether inline completions are shown in a given language scope.
202 // Example: ["string", "comment"]
203 "inline_completions_disabled_in": [],
204 // Whether to show tabs and spaces in the editor.
205 // This setting can take three values:
206 //
207 // 1. Draw tabs and spaces only for the selected text (default):
208 // "selection"
209 // 2. Do not draw any tabs or spaces:
210 // "none"
211 // 3. Draw all invisible symbols:
212 // "all"
213 // 4. Draw whitespaces at boundaries only:
214 // "boundary"
215 // For a whitespace to be on a boundary, any of the following conditions need to be met:
216 // - It is a tab
217 // - It is adjacent to an edge (start or end)
218 // - It is adjacent to a whitespace (left or right)
219 "show_whitespaces": "selection",
220 // Settings related to calls in Zed
221 "calls": {
222 // Join calls with the microphone live by default
223 "mute_on_join": false,
224 // Share your project when you are the first to join a channel
225 "share_on_join": false
226 },
227 // Toolbar related settings
228 "toolbar": {
229 // Whether to show breadcrumbs.
230 "breadcrumbs": true,
231 // Whether to show quick action buttons.
232 "quick_actions": true,
233 // Whether to show the Selections menu in the editor toolbar
234 "selections_menu": true
235 },
236 // Scrollbar related settings
237 "scrollbar": {
238 // When to show the scrollbar in the editor.
239 // This setting can take four values:
240 //
241 // 1. Show the scrollbar if there's important information or
242 // follow the system's configured behavior (default):
243 // "auto"
244 // 2. Match the system's configured behavior:
245 // "system"
246 // 3. Always show the scrollbar:
247 // "always"
248 // 4. Never show the scrollbar:
249 // "never"
250 "show": "auto",
251 // Whether to show cursor positions in the scrollbar.
252 "cursors": true,
253 // Whether to show git diff indicators in the scrollbar.
254 "git_diff": true,
255 // Whether to show buffer search results in the scrollbar.
256 "search_results": true,
257 // Whether to show selected symbol occurrences in the scrollbar.
258 "selected_symbol": true,
259 // Whether to show diagnostic indicators in the scrollbar.
260 "diagnostics": true,
261 /// Forcefully enable or disable the scrollbar for each axis
262 "axes": {
263 /// When false, forcefully disables the horizontal scrollbar. Otherwise, obey other settings.
264 "horizontal": true,
265 /// When false, forcefully disables the vertical scrollbar. Otherwise, obey other settings.
266 "vertical": true
267 }
268 },
269 // Enable middle-click paste on Linux.
270 "middle_click_paste": true,
271 // What to do when multibuffer is double clicked in some of its excerpts
272 // (parts of singleton buffers).
273 // May take 2 values:
274 // 1. Behave as a regular buffer and select the whole word (default).
275 // "double_click_in_multibuffer": "select"
276 // 2. Open the excerpt clicked as a new buffer in the new tab.
277 // "double_click_in_multibuffer": "open",
278 // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
279 "double_click_in_multibuffer": "select",
280 "gutter": {
281 // Whether to show line numbers in the gutter.
282 "line_numbers": true,
283 // Whether to show code action buttons in the gutter.
284 "code_actions": true,
285 // Whether to show runnables buttons in the gutter.
286 "runnables": true,
287 // Whether to show fold buttons in the gutter.
288 "folds": true
289 },
290 "indent_guides": {
291 /// Whether to show indent guides in the editor.
292 "enabled": true,
293 /// The width of the indent guides in pixels, between 1 and 10.
294 "line_width": 1,
295 /// The width of the active indent guide in pixels, between 1 and 10.
296 "active_line_width": 1,
297 /// Determines how indent guides are colored.
298 /// This setting can take the following three values:
299 ///
300 /// 1. "disabled"
301 /// 2. "fixed"
302 /// 3. "indent_aware"
303 "coloring": "fixed",
304 /// Determines how indent guide backgrounds are colored.
305 /// This setting can take the following two values:
306 ///
307 /// 1. "disabled"
308 /// 2. "indent_aware"
309 "background_coloring": "disabled"
310 },
311 // Whether the editor will scroll beyond the last line.
312 "scroll_beyond_last_line": "one_page",
313 // The number of lines to keep above/below the cursor when scrolling.
314 "vertical_scroll_margin": 3,
315 // Whether to scroll when clicking near the edge of the visible text area.
316 "autoscroll_on_clicks": false,
317 // The number of characters to keep on either side when scrolling with the mouse
318 "horizontal_scroll_margin": 5,
319 // Scroll sensitivity multiplier. This multiplier is applied
320 // to both the horizontal and vertical delta values while scrolling.
321 "scroll_sensitivity": 1.0,
322 "relative_line_numbers": false,
323 // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
324 "search_wrap": true,
325 // Search options to enable by default when opening new project and buffer searches.
326 "search": {
327 "whole_word": false,
328 "case_sensitive": false,
329 "include_ignored": false,
330 "regex": false
331 },
332 // When to populate a new search's query based on the text under the cursor.
333 // This setting can take the following three values:
334 //
335 // 1. Always populate the search query with the word under the cursor (default).
336 // "always"
337 // 2. Only populate the search query when there is text selected
338 // "selection"
339 // 3. Never populate the search query
340 // "never"
341 "seed_search_query_from_cursor": "always",
342 "use_smartcase_search": false,
343 // Inlay hint related settings
344 "inlay_hints": {
345 // Global switch to toggle hints on and off, switched off by default.
346 "enabled": false,
347 // Toggle certain types of hints on and off, all switched on by default.
348 "show_type_hints": true,
349 "show_parameter_hints": true,
350 // Corresponds to null/None LSP hint type value.
351 "show_other_hints": true,
352 // Whether to show a background for inlay hints.
353 //
354 // If set to `true`, the background will use the `hint.background` color from the current theme.
355 "show_background": false,
356 // Time to wait after editing the buffer, before requesting the hints,
357 // set to 0 to disable debouncing.
358 "edit_debounce_ms": 700,
359 // Time to wait after scrolling the buffer, before requesting the hints,
360 // set to 0 to disable debouncing.
361 "scroll_debounce_ms": 50
362 },
363 "project_panel": {
364 // Whether to show the project panel button in the status bar
365 "button": true,
366 // Default width of the project panel.
367 "default_width": 240,
368 // Where to dock the project panel. Can be 'left' or 'right'.
369 "dock": "left",
370 // Whether to show file icons in the project panel.
371 "file_icons": true,
372 // Whether to show folder icons or chevrons for directories in the project panel.
373 "folder_icons": true,
374 // Whether to show the git status in the project panel.
375 "git_status": true,
376 // Amount of indentation for nested items.
377 "indent_size": 20,
378 // Whether to reveal it in the project panel automatically,
379 // when a corresponding project entry becomes active.
380 // Gitignored entries are never auto revealed.
381 "auto_reveal_entries": true,
382 // Whether to fold directories automatically and show compact folders
383 // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
384 "auto_fold_dirs": true,
385 /// Scrollbar-related settings
386 "scrollbar": {
387 /// When to show the scrollbar in the project panel.
388 /// This setting can take four values:
389 ///
390 /// 1. null (default): Inherit editor settings
391 /// 2. Show the scrollbar if there's important information or
392 /// follow the system's configured behavior (default):
393 /// "auto"
394 /// 3. Match the system's configured behavior:
395 /// "system"
396 /// 4. Always show the scrollbar:
397 /// "always"
398 /// 5. Never show the scrollbar:
399 /// "never"
400 "show": null
401 },
402 /// Which files containing diagnostic errors/warnings to mark in the project panel.
403 /// This setting can take the following three values:
404 ///
405 /// 1. Do not mark any files:
406 /// "off"
407 /// 2. Only mark files with errors:
408 /// "errors"
409 /// 3. Mark files with errors and warnings:
410 /// "all"
411 "show_diagnostics": "all",
412 // Settings related to indent guides in the project panel.
413 "indent_guides": {
414 // When to show indent guides in the project panel.
415 // This setting can take two values:
416 //
417 // 1. Always show indent guides:
418 // "always"
419 // 2. Never show indent guides:
420 // "never"
421 "show": "always"
422 }
423 },
424 "outline_panel": {
425 // Whether to show the outline panel button in the status bar
426 "button": true,
427 // Default width of the outline panel.
428 "default_width": 300,
429 // Where to dock the outline panel. Can be 'left' or 'right'.
430 "dock": "left",
431 // Whether to show file icons in the outline panel.
432 "file_icons": true,
433 // Whether to show folder icons or chevrons for directories in the outline panel.
434 "folder_icons": true,
435 // Whether to show the git status in the outline panel.
436 "git_status": true,
437 // Amount of indentation for nested items.
438 "indent_size": 20,
439 // Whether to reveal it in the outline panel automatically,
440 // when a corresponding outline entry becomes active.
441 // Gitignored entries are never auto revealed.
442 "auto_reveal_entries": true,
443 /// Whether to fold directories automatically
444 /// when a directory has only one directory inside.
445 "auto_fold_dirs": true,
446 // Settings related to indent guides in the outline panel.
447 "indent_guides": {
448 // When to show indent guides in the outline panel.
449 // This setting can take two values:
450 //
451 // 1. Always show indent guides:
452 // "always"
453 // 2. Never show indent guides:
454 // "never"
455 "show": "always"
456 },
457 /// Scrollbar-related settings
458 "scrollbar": {
459 /// When to show the scrollbar in the project panel.
460 /// This setting can take four values:
461 ///
462 /// 1. null (default): Inherit editor settings
463 /// 2. Show the scrollbar if there's important information or
464 /// follow the system's configured behavior (default):
465 /// "auto"
466 /// 3. Match the system's configured behavior:
467 /// "system"
468 /// 4. Always show the scrollbar:
469 /// "always"
470 /// 5. Never show the scrollbar:
471 /// "never"
472 "show": null
473 }
474 },
475 "collaboration_panel": {
476 // Whether to show the collaboration panel button in the status bar.
477 "button": true,
478 // Where to dock the collaboration panel. Can be 'left' or 'right'.
479 "dock": "left",
480 // Default width of the collaboration panel.
481 "default_width": 240
482 },
483 "chat_panel": {
484 // Whether to show the chat panel button in the status bar.
485 "button": true,
486 // Where to the chat panel. Can be 'left' or 'right'.
487 "dock": "right",
488 // Default width of the chat panel.
489 "default_width": 240
490 },
491 "git_panel": {
492 // Whether to show the git panel button in the status bar.
493 "button": true,
494 // Where to the git panel. Can be 'left' or 'right'.
495 "dock": "left",
496 // Default width of the git panel.
497 "default_width": 360
498 },
499 "message_editor": {
500 // Whether to automatically replace emoji shortcodes with emoji characters.
501 // For example: typing `:wave:` gets replaced with `👋`.
502 "auto_replace_emoji_shortcode": true
503 },
504 "notification_panel": {
505 // Whether to show the notification panel button in the status bar.
506 "button": true,
507 // Where to dock the notification panel. Can be 'left' or 'right'.
508 "dock": "right",
509 // Default width of the notification panel.
510 "default_width": 380
511 },
512 "assistant": {
513 // Version of this setting.
514 "version": "2",
515 // Whether the assistant is enabled.
516 "enabled": true,
517 // Whether to show the assistant panel button in the status bar.
518 "button": true,
519 // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
520 "dock": "right",
521 // Default width when the assistant is docked to the left or right.
522 "default_width": 640,
523 // Default height when the assistant is docked to the bottom.
524 "default_height": 320,
525 // The default model to use when creating new chats.
526 "default_model": {
527 // The provider to use.
528 "provider": "zed.dev",
529 // The model to use.
530 "model": "claude-3-5-sonnet"
531 }
532 },
533 // The settings for slash commands.
534 "slash_commands": {
535 // Settings for the `/docs` slash command.
536 "docs": {
537 // Whether `/docs` is enabled.
538 "enabled": false
539 },
540 // Settings for the `/project` slash command.
541 "project": {
542 // Whether `/project` is enabled.
543 "enabled": false
544 }
545 },
546 // Whether the screen sharing icon is shown in the os status bar.
547 "show_call_status_icon": true,
548 // Whether to use language servers to provide code intelligence.
549 "enable_language_server": true,
550 // Whether to perform linked edits of associated ranges, if the language server supports it.
551 // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
552 "linked_edits": true,
553 // The list of language servers to use (or disable) for all languages.
554 //
555 // This is typically customized on a per-language basis.
556 "language_servers": ["..."],
557 // When to automatically save edited buffers. This setting can
558 // take four values.
559 //
560 // 1. Never automatically save:
561 // "autosave": "off",
562 // 2. Save when changing focus away from the Zed window:
563 // "autosave": "on_window_change",
564 // 3. Save when changing focus away from a specific buffer:
565 // "autosave": "on_focus_change",
566 // 4. Save when idle for a certain amount of time:
567 // "autosave": { "after_delay": {"milliseconds": 500} },
568 "autosave": "off",
569 // Maximum number of tabs per pane. Unset for unlimited.
570 "max_tabs": null,
571 // Settings related to the editor's tab bar.
572 "tab_bar": {
573 // Whether or not to show the tab bar in the editor
574 "show": true,
575 // Whether or not to show the navigation history buttons.
576 "show_nav_history_buttons": true
577 },
578 // Settings related to the editor's tabs
579 "tabs": {
580 // Show git status colors in the editor tabs.
581 "git_status": false,
582 // Position of the close button on the editor tabs.
583 "close_position": "right",
584 // Whether to show the file icon for a tab.
585 "file_icons": false,
586 // Whether to always show the close button on tabs.
587 "always_show_close_button": false,
588 // What to do after closing the current tab.
589 //
590 // 1. Activate the tab that was open previously (default)
591 // "history"
592 // 2. Activate the right neighbour tab if present
593 // "neighbour"
594 // 3. Activate the left neighbour tab if present
595 // "left_neighbour"
596 "activate_on_close": "history",
597 /// Which files containing diagnostic errors/warnings to mark in the tabs.
598 /// Diagnostics are only shown when file icons are also active.
599 /// This setting only works when can take the following three values:
600 ///
601 /// 1. Do not mark any files:
602 /// "off"
603 /// 2. Only mark files with errors:
604 /// "errors"
605 /// 3. Mark files with errors and warnings:
606 /// "all"
607 "show_diagnostics": "off"
608 },
609 // Settings related to preview tabs.
610 "preview_tabs": {
611 // Whether preview tabs should be enabled.
612 // Preview tabs allow you to open files in preview mode, where they close automatically
613 // when you switch to another file unless you explicitly pin them.
614 // This is useful for quickly viewing files without cluttering your workspace.
615 "enabled": true,
616 // Whether to open tabs in preview mode when selected from the file finder.
617 "enable_preview_from_file_finder": false,
618 // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
619 "enable_preview_from_code_navigation": false
620 },
621 // Settings related to the file finder.
622 "file_finder": {
623 // Whether to show file icons in the file finder.
624 "file_icons": true,
625 // Determines how much space the file finder can take up in relation to the available window width.
626 // There are 5 possible width values:
627 //
628 // 1. Small: This value is essentially a fixed width.
629 // "modal_width": "small"
630 // 2. Medium:
631 // "modal_width": "medium"
632 // 3. Large:
633 // "modal_width": "large"
634 // 4. Extra Large:
635 // "modal_width": "xlarge"
636 // 5. Fullscreen: This value removes any horizontal padding, as it consumes the whole viewport width.
637 // "modal_width": "full"
638 //
639 // Default: small
640 "modal_max_width": "small"
641 },
642 // Whether or not to remove any trailing whitespace from lines of a buffer
643 // before saving it.
644 "remove_trailing_whitespace_on_save": true,
645 // Whether to start a new line with a comment when a previous line is a comment as well.
646 "extend_comment_on_newline": true,
647 // Whether or not to ensure there's a single newline at the end of a buffer
648 // when saving it.
649 "ensure_final_newline_on_save": true,
650 // Whether or not to perform a buffer format before saving
651 //
652 // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
653 "format_on_save": "on",
654 // How to perform a buffer format. This setting can take 4 values:
655 //
656 // 1. Format code using the current language server:
657 // "formatter": "language_server"
658 // 2. Format code using an external command:
659 // "formatter": {
660 // "external": {
661 // "command": "prettier",
662 // "arguments": ["--stdin-filepath", "{buffer_path}"]
663 // }
664 // }
665 // 3. Format code using Zed's Prettier integration:
666 // "formatter": "prettier"
667 // 4. Default. Format files using Zed's Prettier integration (if applicable),
668 // or falling back to formatting via language server:
669 // "formatter": "auto"
670 "formatter": "auto",
671 // How to soft-wrap long lines of text.
672 // Possible values:
673 //
674 // 1. Prefer a single line generally, unless an overly long line is encountered.
675 // "soft_wrap": "none",
676 // "soft_wrap": "prefer_line", // (deprecated, same as "none")
677 // 2. Soft wrap lines that overflow the editor.
678 // "soft_wrap": "editor_width",
679 // 3. Soft wrap lines at the preferred line length.
680 // "soft_wrap": "preferred_line_length",
681 // 4. Soft wrap lines at the preferred line length or the editor width (whichever is smaller).
682 // "soft_wrap": "bounded",
683 "soft_wrap": "none",
684 // The column at which to soft-wrap lines, for buffers where soft-wrap
685 // is enabled.
686 "preferred_line_length": 80,
687 // Whether to indent lines using tab characters, as opposed to multiple
688 // spaces.
689 "hard_tabs": false,
690 // How many columns a tab should occupy.
691 "tab_size": 4,
692 // Control what info is collected by Zed.
693 "telemetry": {
694 // Send debug info like crash reports.
695 "diagnostics": true,
696 // Send anonymized usage data like what languages you're using Zed with.
697 "metrics": true
698 },
699 // Automatically update Zed. This setting may be ignored on Linux if
700 // installed through a package manager.
701 "auto_update": true,
702 // Diagnostics configuration.
703 "diagnostics": {
704 // Whether to show warnings or not by default.
705 "include_warnings": true
706 },
707 // Add files or globs of files that will be excluded by Zed entirely:
708 // they will be skipped during FS scan(s), file tree and file search
709 // will lack the corresponding file entries. Overrides `file_scan_inclusions`.
710 "file_scan_exclusions": [
711 "**/.git",
712 "**/.svn",
713 "**/.hg",
714 "**/.jj",
715 "**/CVS",
716 "**/.DS_Store",
717 "**/Thumbs.db",
718 "**/.classpath",
719 "**/.settings"
720 ],
721 // Add files or globs of files that will be included by Zed, even when
722 // ignored by git. This is useful for files that are not tracked by git,
723 // but are still important to your project. Note that globs that are
724 // overly broad can slow down Zed's file scanning. Overridden by `file_scan_exclusions`.
725 "file_scan_inclusions": [".env*"],
726 // Git gutter behavior configuration.
727 "git": {
728 // Control whether the git gutter is shown. May take 2 values:
729 // 1. Show the gutter
730 // "git_gutter": "tracked_files"
731 // 2. Hide the gutter
732 // "git_gutter": "hide"
733 "git_gutter": "tracked_files",
734 // Control whether the git blame information is shown inline,
735 // in the currently focused line.
736 "inline_blame": {
737 "enabled": true
738 // Sets a delay after which the inline blame information is shown.
739 // Delay is restarted with every cursor movement.
740 // "delay_ms": 600
741 //
742 // Whether or not do display the git commit summary on the same line.
743 // "show_commit_summary": false
744 //
745 // The minimum column number to show the inline blame information at
746 // "min_column": 0
747 }
748 },
749 // Configuration for how direnv configuration should be loaded. May take 2 values:
750 // 1. Load direnv configuration using `direnv export json` directly.
751 // "load_direnv": "direct"
752 // 2. Load direnv configuration through the shell hook, works for POSIX shells and fish.
753 // "load_direnv": "shell_hook"
754 "load_direnv": "direct",
755 "inline_completions": {
756 // A list of globs representing files that inline completions should be disabled for.
757 "disabled_globs": [".env"]
758 },
759 // Settings specific to journaling
760 "journal": {
761 // The path of the directory where journal entries are stored
762 "path": "~",
763 // What format to display the hours in
764 // May take 2 values:
765 // 1. hour12
766 // 2. hour24
767 "hour_format": "hour12"
768 },
769 // Settings specific to the terminal
770 "terminal": {
771 // What shell to use when opening a terminal. May take 3 values:
772 // 1. Use the system's default terminal configuration in /etc/passwd
773 // "shell": "system"
774 // 2. A program:
775 // "shell": {
776 // "program": "sh"
777 // }
778 // 3. A program with arguments:
779 // "shell": {
780 // "with_arguments": {
781 // "program": "/bin/bash",
782 // "args": ["--login"]
783 // }
784 // }
785 "shell": "system",
786 // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
787 "dock": "bottom",
788 // Default width when the terminal is docked to the left or right.
789 "default_width": 640,
790 // Default height when the terminal is docked to the bottom.
791 "default_height": 320,
792 // What working directory to use when launching the terminal.
793 // May take 4 values:
794 // 1. Use the current file's project directory. Will Fallback to the
795 // first project directory strategy if unsuccessful
796 // "working_directory": "current_project_directory"
797 // 2. Use the first project in this workspace's directory
798 // "working_directory": "first_project_directory"
799 // 3. Always use this platform's home directory (if we can find it)
800 // "working_directory": "always_home"
801 // 4. Always use a specific directory. This value will be shell expanded.
802 // If this path is not a valid directory the terminal will default to
803 // this platform's home directory (if we can find it)
804 // "working_directory": {
805 // "always": {
806 // "directory": "~/zed/projects/"
807 // }
808 // }
809 "working_directory": "current_project_directory",
810 // Set the cursor blinking behavior in the terminal.
811 // May take 3 values:
812 // 1. Never blink the cursor, ignoring the terminal mode
813 // "blinking": "off",
814 // 2. Default the cursor blink to off, but allow the terminal to
815 // set blinking
816 // "blinking": "terminal_controlled",
817 // 3. Always blink the cursor, ignoring the terminal mode
818 // "blinking": "on",
819 "blinking": "terminal_controlled",
820 // Default cursor shape for the terminal.
821 // 1. A block that surrounds the following character
822 // "block"
823 // 2. A vertical bar
824 // "bar"
825 // 3. An underline / underscore that runs along the following character
826 // "underline"
827 // 4. A box drawn around the following character
828 // "hollow"
829 //
830 // Default: not set, defaults to "block"
831 "cursor_shape": null,
832 // Set whether Alternate Scroll mode (code: ?1007) is active by default.
833 // Alternate Scroll mode converts mouse scroll events into up / down key
834 // presses when in the alternate screen (e.g. when running applications
835 // like vim or less). The terminal can still set and unset this mode.
836 // May take 2 values:
837 // 1. Default alternate scroll mode to on
838 // "alternate_scroll": "on",
839 // 2. Default alternate scroll mode to off
840 // "alternate_scroll": "off",
841 "alternate_scroll": "off",
842 // Set whether the option key behaves as the meta key.
843 // May take 2 values:
844 // 1. Rely on default platform handling of option key, on macOS
845 // this means generating certain unicode characters
846 // "option_as_meta": false,
847 // 2. Make the option keys behave as a 'meta' key, e.g. for emacs
848 // "option_as_meta": true,
849 "option_as_meta": false,
850 // Whether or not selecting text in the terminal will automatically
851 // copy to the system clipboard.
852 "copy_on_select": false,
853 // Whether to show the terminal button in the status bar
854 "button": true,
855 // Any key-value pairs added to this list will be added to the terminal's
856 // environment. Use `:` to separate multiple values.
857 "env": {
858 // "KEY": "value1:value2"
859 },
860 // Set the terminal's line height.
861 // May take 3 values:
862 // 1. Use a line height that's comfortable for reading, 1.618
863 // "line_height": "comfortable"
864 // 2. Use a standard line height, 1.3. This option is useful for TUIs,
865 // particularly if they use box characters
866 // "line_height": "standard",
867 // 3. Use a custom line height.
868 // "line_height": {
869 // "custom": 2
870 // },
871 "line_height": "comfortable",
872 // Activate the python virtual environment, if one is found, in the
873 // terminal's working directory (as resolved by the working_directory
874 // setting). Set this to "off" to disable this behavior.
875 "detect_venv": {
876 "on": {
877 // Default directories to search for virtual environments, relative
878 // to the current working directory. We recommend overriding this
879 // in your project's settings, rather than globally.
880 "directories": [".env", "env", ".venv", "venv"],
881 // Can also be `csh`, `fish`, `nushell` and `power_shell`
882 "activate_script": "default"
883 }
884 },
885 "toolbar": {
886 // Whether to display the terminal title in its toolbar's breadcrumbs.
887 // Only shown if the terminal title is not empty.
888 //
889 // The shell running in the terminal needs to be configured to emit the title.
890 // Example: `echo -e "\e]2;New Title\007";`
891 "breadcrumbs": true
892 }
893 // Set the terminal's font size. If this option is not included,
894 // the terminal will default to matching the buffer's font size.
895 // "font_size": 15,
896 // Set the terminal's font family. If this option is not included,
897 // the terminal will default to matching the buffer's font family.
898 // "font_family": "Zed Plex Mono",
899 // Set the terminal's font fallbacks. If this option is not included,
900 // the terminal will default to matching the buffer's font fallbacks.
901 // This will be merged with the platform's default font fallbacks
902 // "font_fallbacks": ["FiraCode Nerd Fonts"],
903 // Sets the maximum number of lines in the terminal's scrollback buffer.
904 // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
905 // Existing terminals will not pick up this change until they are recreated.
906 // "max_scroll_history_lines": 10000,
907 },
908 "code_actions_on_format": {},
909 /// Settings related to running tasks.
910 "tasks": {
911 "variables": {}
912 },
913 // An object whose keys are language names, and whose values
914 // are arrays of filenames or extensions of files that should
915 // use those languages.
916 //
917 // For example, to treat files like `foo.notjs` as JavaScript,
918 // and `Embargo.lock` as TOML:
919 //
920 // {
921 // "JavaScript": ["notjs"],
922 // "TOML": ["Embargo.lock"]
923 // }
924 //
925 "file_types": {
926 "Plain Text": ["txt"],
927 "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "**/.vscode/**/*.json"],
928 "Shell Script": [".env.*"]
929 },
930 /// By default use a recent system version of node, or install our own.
931 /// You can override this to use a version of node that is not in $PATH with:
932 /// {
933 /// "node": {
934 /// "path": "/path/to/node"
935 /// "npm_path": "/path/to/npm" (defaults to node_path/../npm)
936 /// }
937 /// }
938 /// or to ensure Zed always downloads and installs an isolated version of node:
939 /// {
940 /// "node": {
941 /// "ignore_system_version": true,
942 /// }
943 /// NOTE: changing this setting currently requires restarting Zed.
944 "node": {},
945 // The extensions that Zed should automatically install on startup.
946 //
947 // If you don't want any of these extensions, add this field to your settings
948 // and change the value to `false`.
949 "auto_install_extensions": {
950 "html": true
951 },
952 // Different settings for specific languages.
953 "languages": {
954 "Astro": {
955 "language_servers": ["astro-language-server", "..."],
956 "prettier": {
957 "allowed": true,
958 "plugins": ["prettier-plugin-astro"]
959 }
960 },
961 "Blade": {
962 "prettier": {
963 "allowed": true
964 }
965 },
966 "C": {
967 "format_on_save": "off",
968 "use_on_type_format": false
969 },
970 "C++": {
971 "format_on_save": "off",
972 "use_on_type_format": false
973 },
974 "CSS": {
975 "prettier": {
976 "allowed": true
977 }
978 },
979 "Dart": {
980 "tab_size": 2
981 },
982 "Diff": {
983 "remove_trailing_whitespace_on_save": false,
984 "ensure_final_newline_on_save": false
985 },
986 "Elixir": {
987 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
988 },
989 "Erlang": {
990 "language_servers": ["erlang-ls", "!elp", "..."]
991 },
992 "Go": {
993 "code_actions_on_format": {
994 "source.organizeImports": true
995 }
996 },
997 "GraphQL": {
998 "prettier": {
999 "allowed": true
1000 }
1001 },
1002 "HEEX": {
1003 "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
1004 },
1005 "HTML": {
1006 "prettier": {
1007 "allowed": true
1008 }
1009 },
1010 "Java": {
1011 "prettier": {
1012 "allowed": true,
1013 "plugins": ["prettier-plugin-java"]
1014 }
1015 },
1016 "JavaScript": {
1017 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1018 "prettier": {
1019 "allowed": true
1020 }
1021 },
1022 "JSON": {
1023 "prettier": {
1024 "allowed": true
1025 }
1026 },
1027 "JSONC": {
1028 "prettier": {
1029 "allowed": true
1030 }
1031 },
1032 "Markdown": {
1033 "format_on_save": "off",
1034 "use_on_type_format": false,
1035 "prettier": {
1036 "allowed": true
1037 }
1038 },
1039 "PHP": {
1040 "language_servers": ["phpactor", "!intelephense", "..."],
1041 "prettier": {
1042 "allowed": true,
1043 "plugins": ["@prettier/plugin-php"],
1044 "parser": "php"
1045 }
1046 },
1047 "Ruby": {
1048 "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
1049 },
1050 "SCSS": {
1051 "prettier": {
1052 "allowed": true
1053 }
1054 },
1055 "SQL": {
1056 "prettier": {
1057 "allowed": true,
1058 "plugins": ["prettier-plugin-sql"]
1059 }
1060 },
1061 "Starlark": {
1062 "language_servers": ["starpls", "!buck2-lsp", "..."]
1063 },
1064 "Svelte": {
1065 "language_servers": ["svelte-language-server", "..."],
1066 "prettier": {
1067 "allowed": true,
1068 "plugins": ["prettier-plugin-svelte"]
1069 }
1070 },
1071 "TSX": {
1072 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1073 "prettier": {
1074 "allowed": true
1075 }
1076 },
1077 "Twig": {
1078 "prettier": {
1079 "allowed": true
1080 }
1081 },
1082 "TypeScript": {
1083 "language_servers": ["!typescript-language-server", "vtsls", "..."],
1084 "prettier": {
1085 "allowed": true
1086 }
1087 },
1088 "Vue.js": {
1089 "language_servers": ["vue-language-server", "..."],
1090 "prettier": {
1091 "allowed": true
1092 }
1093 },
1094 "XML": {
1095 "prettier": {
1096 "allowed": true,
1097 "plugins": ["@prettier/plugin-xml"]
1098 }
1099 },
1100 "YAML": {
1101 "prettier": {
1102 "allowed": true
1103 }
1104 },
1105 "Zig": {
1106 "language_servers": ["zls", "..."]
1107 }
1108 },
1109 // Different settings for specific language models.
1110 "language_models": {
1111 "anthropic": {
1112 "version": "1",
1113 "api_url": "https://api.anthropic.com"
1114 },
1115 "google": {
1116 "api_url": "https://generativelanguage.googleapis.com"
1117 },
1118 "ollama": {
1119 "api_url": "http://localhost:11434"
1120 },
1121 "openai": {
1122 "version": "1",
1123 "api_url": "https://api.openai.com/v1"
1124 }
1125 },
1126 // Zed's Prettier integration settings.
1127 // Allows to enable/disable formatting with Prettier
1128 // and configure default Prettier, used when no project-level Prettier installation is found.
1129 "prettier": {
1130 // // Whether to consider prettier formatter or not when attempting to format a file.
1131 // "allowed": false,
1132 //
1133 // // Use regular Prettier json configuration.
1134 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1135 // // the project has no other Prettier installed.
1136 // "plugins": [],
1137 //
1138 // // Use regular Prettier json configuration.
1139 // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
1140 // // the project has no other Prettier installed.
1141 // "trailingComma": "es5",
1142 // "tabWidth": 4,
1143 // "semi": false,
1144 // "singleQuote": true
1145 },
1146 // LSP Specific settings.
1147 "lsp": {
1148 // Specify the LSP name as a key here.
1149 // "rust-analyzer": {
1150 // // These initialization options are merged into Zed's defaults
1151 // "initialization_options": {
1152 // "check": {
1153 // "command": "clippy" // rust-analyzer.check.command (default: "check")
1154 // }
1155 // }
1156 // }
1157 },
1158 // Jupyter settings
1159 "jupyter": {
1160 "enabled": true
1161 // Specify the language name as the key and the kernel name as the value.
1162 // "kernel_selections": {
1163 // "python": "conda-base"
1164 // "typescript": "deno"
1165 // }
1166 },
1167 // Vim settings
1168 "vim": {
1169 "toggle_relative_line_numbers": false,
1170 "use_system_clipboard": "always",
1171 "use_multiline_find": false,
1172 "use_smartcase_find": false,
1173 "highlight_on_yank_duration": 200,
1174 "custom_digraphs": {}
1175 },
1176 // The server to connect to. If the environment variable
1177 // ZED_SERVER_URL is set, it will override this setting.
1178 "server_url": "https://zed.dev",
1179 // Settings overrides to use when using Zed Preview.
1180 // Mostly useful for developers who are managing multiple instances of Zed.
1181 "preview": {
1182 // "theme": "Andromeda"
1183 },
1184 // Settings overrides to use when using Zed Nightly.
1185 // Mostly useful for developers who are managing multiple instances of Zed.
1186 "nightly": {
1187 // "theme": "Andromeda"
1188 },
1189 // Settings overrides to use when using Zed Stable.
1190 // Mostly useful for developers who are managing multiple instances of Zed.
1191 "stable": {
1192 // "theme": "Andromeda"
1193 },
1194 // Settings overrides to use when using Zed Dev.
1195 // Mostly useful for developers who are managing multiple instances of Zed.
1196 "dev": {
1197 // "theme": "Andromeda"
1198 },
1199 // Task-related settings.
1200 "task": {
1201 // Whether to show task status indicator in the status bar. Default: true
1202 "show_status_indicator": true
1203 },
1204 // Whether to show full labels in line indicator or short ones
1205 //
1206 // Values:
1207 // - `short`: "2 s, 15 l, 32 c"
1208 // - `long`: "2 selections, 15 lines, 32 characters"
1209 // Default: long
1210 "line_indicator_format": "long",
1211 // Set a proxy to use. The proxy protocol is specified by the URI scheme.
1212 //
1213 // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
1214 // `socks5h`. `http` will be used when no scheme is specified.
1215 //
1216 // By default no proxy will be used, or Zed will try get proxy settings from
1217 // environment variables.
1218 //
1219 // Examples:
1220 // - "proxy": "socks5h://localhost:10808"
1221 // - "proxy": "http://127.0.0.1:10809"
1222 "proxy": null,
1223 // Set to configure aliases for the command palette.
1224 // When typing a query which is a key of this object, the value will be used instead.
1225 //
1226 // Examples:
1227 // {
1228 // "W": "workspace::Save"
1229 // }
1230 "command_aliases": {},
1231 // Whether to show user picture in titlebar.
1232 "show_user_picture": true,
1233 // ssh_connections is an array of ssh connections.
1234 // You can configure these from `project: Open Remote` in the command palette.
1235 // Zed's ssh support will pull configuration from your ~/.ssh too.
1236 // Examples:
1237 // [
1238 // {
1239 // "host": "example-box",
1240 // // "port": 22, "username": "test", "args": ["-i", "/home/user/.ssh/id_rsa"]
1241 // "projects": [
1242 // {
1243 // "paths": ["/home/user/code/zed"]
1244 // }
1245 // ]
1246 // }
1247 // ]
1248 "ssh_connections": [],
1249 // Configures context servers for use in the Assistant.
1250 "context_servers": {}
1251}