The archive view's fuzzy_match_positions used chars().enumerate()
which produces character indices, not byte indices. When thread titles
contain multi-byte UTF-8 characters (emoji, CJK, etc.), these character
indices don't correspond to valid byte boundaries, causing a panic in
HighlightedLabel::new which asserts that highlight indices are valid
UTF-8 boundaries.

Switch to char_indices() and eq_ignore_ascii_case() to produce correct
byte positions, matching the approach used by the sidebar's version of
the same function.

The archive view's fuzzy_match_positions used chars().enumerate()
which produces character indices, not byte indices. When thread titles
contain multi-byte UTF-8 characters (emoji, CJK, etc.), these character
indices don't correspond to valid byte boundaries, causing a panic in
HighlightedLabel::new.

Switch to char_indices() and eq_ignore_ascii_case() to produce correct
byte positions, matching the approach used by the sidebar's version of
the same function.

When archiving an agent thread that uses linked git worktrees, clean up
those worktrees by removing them from open projects and running
git worktree remove. Handles fallback workspace navigation when the
current workspace becomes empty, save prompts for dirty buffers, and
rollback on failure.

Key design decisions:
- Sidebar focus management always runs on archive, even when async
  cleanup is pending, so active_entry stays consistent.
- All error paths after worktree removal trigger rollback to re-add
  the worktrees to affected projects.
- Temporary projects created for repository access are kept alive
  until the git operation completes.
- The open workspaces list is computed once during planning and
  threaded through to avoid redundant iteration.

Release Notes:

* [x] It's possible to get into a state where agent panel shows a thread
that is archived

- N/A

---------

Co-authored-by: Eric Holk <eric@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>

Closes #52943

## Summary
- Prefer SSH nicknames over raw hosts in remote connection display names
- Add regression tests for nickname and host fallback behavior

## Why
The `nickname` field is documented as the user-facing label for SSH
connections, but `RemoteConnectionOptions::display_name()` always
returned the raw host. That meant recent-projects UI surfaces kept
ignoring nicknames even when they were configured.

## Validation
- `cargo test -p remote ssh_display_name`
- `cargo test -p remote`

Release Notes:

- Fixed SSH recent-project labels to show configured nicknames instead
of raw hosts when available.

Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable

Addresses an auxiliary windows bug found in #52924 - bind mounts are not
working in Windows because MountDefinition is not accounting for
absolute Windows paths.

Release Notes:

- Fixed windows bind mount issue with dev containers

Follow up to https://github.com/zed-industries/zed/pull/53017

This PR does some significant refactoring of the `follow_tail` feature
in the GPUI list. That's only used by the agent panel's thread view and
given to the height-changing nature of streaming agent responses, we
were seeing some scroll snapping bugs upon scrolling while the thread is
generating. In the process of fixing it, we introduced a
`remeasure_items` method as an alternative to `splice` so that we could
get the remeasurement fix without scroll position changes. We already
had a `remeasure` method that did that for all of the indexes, but we
needed something more scoped out for the agent panel case, so as to not
remeasure the entire list's content on every new streamed token.

Effectively, this ends up reverting what the PR linked above introduced,
but it improved the API in the process.
 
Release Notes:

- N/A

Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>

Implements basic focus-follows-mouse behavior.

Right now, it's only applied in the `workspace` crate for `Pane`s, so
anything that lives outside of that container (panels and such for the
most part) won't have this behavior applied. The core logic is
implemented as an extension trait, and should be trivial to apply to
other elements as it makes sense.



https://github.com/user-attachments/assets/d338fa30-7f9c-439f-8b50-1720e3f509b1



Closes #8167 

Release Notes:

- Added "Focus Follows Mouse" for editor and terminal panes

---------

Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>

When atlas tiles are rapidly allocated and freed (e.g. watching a shared
screen in Collab), a texture can become unreferenced and be removed
while GPU uploads for it are still pending. On the next frame,
`flush_uploads` indexes into the now-empty texture slot and panics:

```
  thread 'main' panicked at crates/gpui_wgpu/src/wgpu_atlas.rs:231:40:
  texture must exist...

  #11 core::option::expect_failed
  #12 gpui_wgpu::wgpu_atlas::WgpuAtlas::before_frame
  #13 gpui_wgpu::wgpu_renderer::WgpuRenderer::draw
```

This change drains pending uploads for a texture when it becomes
unreferenced in `remove`, and skips uploads for missing textures in
`flush_uploads` as a safety net.

Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable


Release Notes:

- Fixed occasional crashes when viewing a screen share

Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable

Closes #53048

Release Notes:

- Fixed serialization error with Docker Compose for dev containers

I needed to run the docs locally and ran into this error when following
the [docs
README.md](https://github.com/zed-industries/zed/blob/main/docs/README.md).

```
Error: Found 27 errors in docs
2026-04-01 10:15:39 [ERROR] (mdbook::utils): Error: The "zed_docs_preprocessor" preprocessor exited unsuccessfully with exit status: 1 status
```

It turns out I needed to run `script/generate-action-metadata` first.
This PR adds that step to the doc.

Self-Review Checklist:

- [X] I've reviewed my own diff for quality, security, and reliability
- [X] Unsafe blocks (if any) have justifying comments
- [X] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [X] Tests cover the new/changed behavior
- [X] Performance impact has been considered and is acceptable

Closes #ISSUE

Release Notes:

- N/A

I also added a keybinding to focus the search bar.

Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable

Closes #ISSUE

Release Notes:

- N/A or Added/Fixed/Improved ...

Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [ ] Unsafe blocks (if any) have justifying comments
- [ ] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable

Closes #53042

Release Notes:

- Fixed dev container failing to open when Docker Compose file contains
`labels`

---------

Co-authored-by: KyleBarton <kjb@initialcapacity.io>

This PR adds tracking of project groups to the MultiWorkspace and
serialization/restoration of them. This will later be used by the
sidebar to provide reliable reloading of threads across Zed reloads.

Release Notes:

- N/A

---------

Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>

## Context

Fixes #48163

Also update the logic from `git remote -v` + manually parse => `git
remote get-url origin`

Not sure the best way to test this

## How to Review

<!-- Help reviewers focus their attention:
- For small PRs: note what to focus on (e.g., "error handling in
foo.rs")
- For large PRs (>400 LOC): provide a guided tour — numbered list of
files/commits to read in order. (The `large-pr` label is applied
automatically.)
     - See the review process guidelines for comment conventions -->

## Self-Review Checklist

<!-- Check before requesting review: -->
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [ ] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable

Release Notes:

- Fixed rebuilding dev extensions when user git config contains url
rewriting rules

Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable

Closes #52973

## Problem

The file picker crashes with `highlight index N is not a valid UTF-8
boundary` when file paths contain Unicode characters whose lowercase
form expands to multiple codepoints. Turkish `İ` (U+0130) is the trigger
here: Rust's `char::to_lowercase()` turns it into `i` + combining dot
above (two codepoints). That expansion breaks the fuzzy matcher in two
ways:

1. The `j_regular` index mapping mixes the expanded lowercase index
space with the original character index space, so highlight positions
land on invalid byte boundaries.
2. The scoring matrices are allocated with the expanded length but
indexed with the original length as stride, so rows alias each other and
corrupt stored values.

Users with Turkish locale filenames were hitting this on v0.229.0 and
v0.230.0 stable.

## Fix

I went with simple 1:1 case mapping: a `simple_lowercase` helper in
`char_bag.rs` that takes only the first codepoint from `to_lowercase()`
and drops any trailing combining characters. For `İ` this gives `i`,
which is what anyone would actually type in a search query. The same
function is used in the matcher, the char bag pre-filter, and both
query-lowercasing call sites (`paths.rs` and `strings.rs`).

This gets rid of the `extra_lowercase_chars` BTreeMap, the `j_regular`
adjustment, and the matrix sizing discrepancy. The matcher now works
with a flat character array where `lowercase_candidate_chars.len() ==
candidate_chars.len()`, so there's no expanded-vs-original index space
to get wrong.

I also fixed `CharBag::insert`, which used `to_ascii_lowercase()` and
silently ignored non-ASCII characters. A file like `aİbİcdef.txt`
wouldn't show up when searching `ai` because `İ` was never registered as
`i` in the bag. It now goes through `simple_lowercase` too.

The alternative was keeping full case folding and fixing the index
tracking with a `Vec<usize>` mapping expanded positions back to
originals. That would work but keeps the dual-index-space complexity
that caused these bugs, plus adds a per-candidate allocation for the
mapping vector.

## Prior art

fzf uses Go's `unicode.To(unicode.LowerCase, r)`, which is simple case
mapping -- always one rune in, one rune out. `İ` maps to `i`, no
expansion.

VS Code's `String.toLowerCase()` does produce the expanded form, but the
scorer compares UTF-16 code units independently and sidesteps the
problem in practice.

Neither tool maintains a mapping between expanded and original index
spaces.

## Trade-off

Searching for the combining dot above (U+0307) won't match `İ` in a path
anymore. Nobody types combining characters in a file picker, and fzf
doesn't support it either.

## Screenshot
<img width="1282" height="458" alt="Screenshot 2026-04-02 at 09 56 34"
src="https://github.com/user-attachments/assets/720d327a-4855-4d4d-989e-cbd1c0657f97"
/>


Release Notes:
- Fixed a crash and improved matching and highlighting in the file
picker for paths with non-ASCII
  characters (e.g., Turkish İ, ß, fi).

---------

Co-authored-by: Oleksiy Syvokon <oleksiy.syvokon@gmail.com>

Closes #51622

Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [ ] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)

Release Notes:

- Fixed markdown escape characters being visible in LSP diagnostic
messages when leading whitespace caused indented code blocks

---------

Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>

This enables us to always different git worktrees of the same repo
together.

Depends on https://github.com/zed-industries/cloud/pull/2220

Release Notes:

- N/A

---------

Co-authored-by: Eric Holk <eric@zed.dev>

This PR adds persistence to the toggle state for the `Show Occupied
Channels` filter.

Also, while driving by, I:
- renamed a few variables to use `occupied` over `active`, which
should've happened in https://github.com/zed-industries/zed/pull/52531.
- extracted `"favorite_channels"` into a global

Self-Review Checklist:

- [X] I've reviewed my own diff for quality, security, and reliability
- [X] Unsafe blocks (if any) have justifying comments
- [X] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [ ] Tests cover the new/changed behavior
- [X] Performance impact has been considered and is acceptable

Closes #ISSUE

Release Notes:

- Added persistence to the `Show Occupied Channels` collab toggle.

- Make notification icons show up even for threads of the currently
active workspace
- When with a notification/any other status, replace thread item's agent
icon a status icon for higher visbility
- Remove hover state from currently active project/workspace's header
- Make project/workspace label brighter if I'm inside of it
- Adjust colors all around a bit (sidebar background and border, and
icons within the project header)

Release Notes:

- N/A

Follow-up to https://github.com/zed-industries/zed/pull/52781, adding
some different icons to better express the state in which the split diff
_is selected_ but _isn't active_, which happens when the editor is
smaller than a given amount of defined columns.


https://github.com/user-attachments/assets/2e7aaf6c-077f-4be5-9439-ce6c2050e63d

Release Notes:

- N/A

This PR decouples `language_model`'s dependence on Zed-specific
implementation details. In particular
* `credentials_provider` is split into a generic `credentials_provider`
crate that provides a trait, and `zed_credentials_provider` that
implements the said trait for Zed-specific providers and has functions
that can populate a global state with them
* `zed_env_vars` is split into a generic `env_var` crate that provides
generic tooling for managing env vars, and `zed_env_vars` that contains
Zed-specific statics
* `client` is now dependent on `language_model` and not vice versa

Release Notes:

- N/A

Some tiny tweaks so that things look just a bit tidier in the collab
panel.

| Before | After |
|--------|--------|
| <img width="594" height="276" alt="Screenshot 2026-04-02 at 11  39@2x"
src="https://github.com/user-attachments/assets/f542d131-dbc5-41eb-bc13-0ebce3cf19a6"
/> | <img width="592" height="260" alt="Screenshot 2026-04-02 at 11 
34@2x"
src="https://github.com/user-attachments/assets/1198bc49-f780-433e-bb5d-6304f13703d6"
/> |

Release Notes:

- N/A

Fixes #52656

Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable

Closes #52656 

Release Notes:

- Added keybindings for scrolling in agent view

---------

Co-authored-by: Oleksiy Syvokon <oleksiy.syvokon@gmail.com>

This PR fixes an issue where, sometimes, you couldn't scroll all the way
to the bottom of the thread's content. The scrollbar would show up at
the bottom of the scrollable container but the content was visibly cut
off. Turns out that's a consequence of the top-down thread generation
introduced in https://github.com/zed-industries/zed/pull/52440, where
changing the list alignment to `Top` made it visible that sometimes, the
maximum scroll area would get underestimated because the items in the
thread view's list would have a stale height measurement. So, the way
this PR fixes the issue is by calling `splice_focusable` in the
`EntryUpdated` event, too, so that the height of the items in the
overdraw area get marked as unmeasured, triggering a list re-render and
re-measuring.

We started by writing a test at the list level that would reproduce the
regression but then later figured out that this is not an inherent list
problem; it was rather a problem with its use within the thread view
layer. Then, we explored writing a test that documented the regression,
but it turned out to be very hard to simulate this sort of set up in
which certain elements would have its height changed during streaming,
which would be how you'd get to a mismatched height situation.

Therefore, given `AcpThreadEvent::NewEntry` already called
`splice_focusable` and don't have a test for it, we figure it'd be safe
to move forward without one, too. We then introduced a helper that's now
shared between `AcpThreadEvent::NewEntry` and
`AcpThreadEvent::EntryUpdated`.

Release Notes:

- Agent: Fixed an issue where sometimes you couldn't scroll all the way
to the bottom of the thread even though there's visibly more content
below the fold.

Co-authored-by: Eric Holk <eric@zed.dev>

Taking advantage that we do have this capability now within the number
field component. I initially thought that some wouldn't make sense to be
editable but upon further reflection, why not? The buttons continue to
work, but if you want to type a more precise value, it should be
possible, too!

Release Notes:

- N/A

## Before you mark this PR as ready for review, make sure that you have:

- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [x] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)

## Summary

Adds a `--dev-container` CLI flag that automatically triggers "Reopen in
Dev Container" when a `.devcontainer/` configuration is found in the
project directory.

```sh
zed --dev-container /path/to/project
```

## Motivation

This enables fully scripted dev container workflows — for example,
creating a git worktree and immediately opening it in a dev container
without any manual UI interaction:

```sh
git worktree add ../feature-branch
zed --dev-container ../feature-branch
```

The dev container modal fires automatically once the workspace finishes
initializing, so the environment is ready by the time you look at the
window. This is useful for automation scripts that prepare environments
and kick off agent runs for tasks like bug report triage.

Here's an [example
script](https://github.com/antont/todo-rs-ts/blob/main/scripts/devcontainer-new.sh)
that creates a worktree and opens it as a dev container in one step.

Related: #48682 requests a `devcontainer://` protocol for connecting to
already-running dev containers — a complementary but different use case.
This PR covers the "open project and trigger dev container setup" path.

## How it works

- The `--dev-container` flag flows through the CLI IPC protocol to the
workspace as an `open_in_dev_container` option.
- On the first worktree scan completion, if devcontainer configs are
detected, the dev container modal opens automatically.
- If no `.devcontainer/` config is found, the flag is cleared and a
warning is logged.

## Notable changes

- **`Workspace::worktree_scans_complete`** promoted from `#[cfg(test)]`
to production. It was only test-gated because it had no production
callers — it's a pure read-only future with no side effects.
- **`suggest_on_worktree_updated`** now takes `&mut Workspace` to read
and clear the CLI flag.
- Extracted **`open_dev_container_modal`** helper shared between the CLI
code path and the suggest notification.

## Test plan

- [x] `cargo test -p zed open_listener` — includes
`test_dev_container_flag_opens_modal` and
`test_dev_container_flag_cleared_without_config`
- [x] `cargo test -p recent_projects` — existing suggest tests still
pass
- [x] Manual: `cargo run -- --dev-container
/path/to/project-with-devcontainer` opens the modal

Release Notes:

- Added `--dev-container` CLI flag to automatically open a project in a
dev container when `.devcontainer/` configuration is present.

🤖 Generated with [Claude Code](https://claude.com/claude-code)

---------

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>

Closes #47907

Implements the four git checkpoint operations (`create`, `restore`,
`compare`, `diff`) that had been stubbed out for remote repositories,
and related test infrastructure.

Testing steps:

1. Open a project with a `.devcontainer` configuration and connect to
the Dev Container
2. Open an Agent thread and ask the agent to make a code change
3. After the agent completes, verify the "Restore from checkpoint"
button appears (previously missing in Dev Container sessions)
4. Click "Restore from checkpoint" and confirm the file reverts to its
prior state

Release Notes:

- Added support for git checkpoint operations in remote/Dev Container
sessions, restoring the "Restore from checkpoint" button in Agent
threads.

---------

Co-authored-by: KyleBarton <kjb@initialcapacity.io>

Syntax highlighting and its customization are very important to many
developers, including me. I've looked through a number of issues and
discussions on this topic and haven't found any active PRs. Currently,
there's no way to customize highlighting for custom JSX tags, as they
use `@type`. Since TSX has a particularly complex syntax and can often
contain types/aliases/generics/tags in a dense sequence, they all blends
into a single color and makes it difficult to "parse" by eyes.

To avoid proposing something arbitrary, I looked into how this is done
elsewhere.

- VS Code `support.class.component.tsx`
[TypeScriptReact.tmLanguage.json](https://github.com/microsoft/vscode/blob/724656efa2c26ab6e7eb2023426dcf2658dc3203/extensions/typescript-basics/syntaxes/TypeScriptReact.tmLanguage.json#L5802)

But it relies on both legacy [tmLanguage naming
conventions](https://macromates.com/manual/en/language_grammars#:~:text=rarely%20be%20used\).-,support,-%E2%80%94%20things%20provided%20by)
and the outdated assumption that React components are always classes.

- ReScript `@tag`
[rescript-zed](https://github.com/rescript-lang/rescript-zed/blob/b3930c1754ab2762938244546ea2c7fb97d01cb3/languages/rescript/highlights.scm#L277)

It's not entirely correct to just use a `@tag` - it's better to
distinguish JSX Intrinsic Elements from custom ones.

- Vue `@tag @tag.component.type.constructor`
[zed-extensions/vue](https://github.com/zed-extensions/vue/blob/2697588c5cde11375d47f53f9449af8e32600d81/languages/vue/highlights.scm#L9C21-L9C52)

- Svelte `@tag @tag.component.type.constructor`
[zed-extensions/svelte](https://github.com/zed-extensions/svelte/blob/ae381a1217d14c26cbedfaf84b0a2f5ae508f40c/languages/svelte/highlights.scm#L46C21-L46C52)

The similarity between Vue and Svelte implementations (perhaps one
borrowed from the other) didn't seem coincidental and the approach felt
appropriate.

**I decided to adopt the same one to maintain consistency for theme
creators.**

So, how it looks:

**Release (0.224.9) version**
<img width="440" height="220" alt="zed-one-release"
src="https://github.com/user-attachments/assets/6f8726c5-a17e-4387-941c-69e5c1569049"
/>

**Local version with changes** - no breaking changes for builtin themes
- uses `type` color as before and can be changed in themes separately if
needed
<img width="440" height="220" alt="zed-one-local"
src="https://github.com/user-attachments/assets/a11cc5ed-20fc-45d2-8ebd-a908503999c3"
/>

**Local version with changes and theme overrides**
<img width="440" height="220" alt="zed-one-with-overrides"
src="https://github.com/user-attachments/assets/1997bd5b-7fa4-4346-8338-b5d61e9e832b"
/>

With these changes in the config:

```jsonc
"theme_overrides": {
  "One Light": {
    "syntax": {
      // "tag.component" also matches
      "type.component": {
        "color": "#d3604fff",
      },
    },
  },
},
```

I'm pretty sure this will help many developers enjoy Zed even more.

Release Notes:

- Improved syntax highlighting for custom jsx elements in TSX and
JavaScript languages. Theme authors and users can now highlight these in
their theme/theme overrides using `tag.component.jsx`

Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable

Closes #ISSUE

Release Notes:

- N/A or Added/Fixed/Improved ...

Co-authored-by: Joseph T. Lyons <JosephTLyons@gmail.com>

After #52953 gets merged the git graph will be ready for it's preview
release, so we can finally remove the feature flag! AKA this PR releases
the git graph

Self-Review Checklist:

- [ ] I've reviewed my own diff for quality, security, and reliability
- [ ] Unsafe blocks (if any) have justifying comments
- [ ] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [ ] Tests cover the new/changed behavior
- [ ] Performance impact has been considered and is acceptable

Closes #ISSUE

Release Notes:

- Add Git Graph. Can be accessed through the button on the bottom of the
git panel or the `git graph: Open` action

Release Notes:

- Added controls to the settings UI for whether the terminal and agent
panels use flexible width.

Update the heading typeface to use IBM Plex Serif, the code typeface to
use Lilex (IBM Plex Mono), and pull them from the zed.dev CDN. Also
added some stray design adjustments here and there.

Release Notes:

- N/A

### Summary

This PR integrates the git graph canvas with the `Table` component’s
`RedistributableColumnsState`, making the graph column resizable while
preserving the table’s existing resize behavior. In particular, column
resizing continues to use the same cascading redistribution behavior as
the table. This is also the last PR needed to remove the feature flag on
the git graph!

### Table API changes

I pulled the redistributable column logic out of `Table` into reusable
UI helpers so layouts outside of `Table` can participate in the same
column resizing behavior. This adds a shared
`RedistributableColumnsState` API, along with helpers for binding
drag/drop behavior, rendering resize handles, and constructing header
resize metadata. I also added `ColumnWidthConfig::explicit` and
`TableRenderContext::for_column_widths` so callers can render table like
headers and content with externally managed column widths.

The reason for this change is that the git graph now renders a custom
split layout: a graph canvas on the left and table content on the right.
By reusing the same column state and resize machinery, the graph column
can resize together with the table columns while preserving the existing
table behavior, including cascading column redistribution and double
click reset to default sizing.

I also adjusted the resize handle interaction styling so the divider
stays in its hovered/highlighted state while a drag is active, which
makes the drag target feel more stable and visually consistent during
resizing.

### Preview

https://github.com/user-attachments/assets/347eed71-0cc1-4db4-9dee-a86ee5ab6f91



Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [ ] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable

Release Notes:

- N/A or Added/Fixed/Improved ...

Now that I've started migrating blog content into the `zeddotdev-images`
bucket, I've added a bit of structure.

`/blog`
`/docs`

This PR just updates the links so we can stay organized going forward.
Shouldn't be seeing much thrash like this after this PR.

Release Notes:

- N/A

This PR mostly moves some code around. It also adds a high-level
`format_expected_output` function that routes patch formatting to
specific prompt formats. This was `zeta_prompt` can format
`expected_output` for training.

Keeping everything prompt-related in a "pure" module (with no heavy
dependencies) makes it easier to write bindings.


Release Notes:

- N/A

Follow-up of https://github.com/zed-industries/zed/pull/40185

Release Notes:

- N/A

## Summary

- PR #48109 changed the capture name for C/C++ preprocessor directives
from `@keyword.directive` to `@preproc`. While semantically correct, the
builtin themes had `preproc` defined with colors nearly
indistinguishable from plain text (e.g. One Dark `#dce0e5ff`, Ayu Dark
`#bfbdb6ff`), making `#include`, `#define`, etc. appear unhighlighted.
- This PR updates the `preproc` color in all builtin themes (and the
fallback theme) to match their respective `keyword` color, restoring
visible highlighting for preprocessor directives.

Fixes #49024

## Side effects

- Go uses `@preproc` for `//go:` and `// +build` compiler directives.
These will also change from the previous muted gray to the keyword
color. This is arguably an improvement — compiler directives are special
constructs that benefit from visible highlighting, consistent with how
other editors (CLion, VS Code) handle them.

## Test plan

- [x] `cargo test -p language highlight_map` passes
- [x] Open a C/C++ file and verify `#include`, `#define`, `#ifdef`, etc.
are highlighted with the keyword color
- [x] Verify across multiple builtin themes (One Dark, Ayu Dark, Gruvbox
Dark, etc.)
- [x] Open a Go file and verify `//go:` directives are highlighted
reasonably

🤖 Generated with [Claude Code](https://claude.com/claude-code)

Release Notes:

- Fixed C/C++ preprocessor directives (`#include`, `#define`, etc.)
appearing unhighlighted in builtin themes.

---------

Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: MrSubidubi <finn@zed.dev>

- Update diff in highlights.scm to use semantic @diff.plus and
@diff.minus tokens
- Add diff.plus, diff.minus tokens to fallback theme
- Add diff syntax tokens to all official themes (One, Gruvbox, Ayu)

This fixes the issue where diff files showed inverted colors (additions
in purple/blue, deletions in green) by using proper semantic tokens
instead of @string and @keyword.

Related discussion in https://github.com/zed-industries/zed/issues/34057
(thought there might be second issue in that issue)

Release Notes:

- Added support for diff.plus, diff.minus and diff.deleta theme
selectors in the diff syntax grammar. Previously diff.plus was mapped to
@string and diff.minus was mapped to @keyword.

*Before:*

<img width="689" height="566" alt="Screenshot 2025-12-20 at 10 58 34 AM"
src="https://github.com/user-attachments/assets/b7ae4428-2011-4ec2-a803-7e30599e1715"
/>

*After:*

<img width="659" height="548" alt="Screenshot 2025-12-20 at 10 58 30 AM"
src="https://github.com/user-attachments/assets/02df31b5-1f1a-40af-adf0-1ac34457cdd4"
/>

*Before:*

<img width="650" height="545" alt="Screenshot 2025-12-20 at 10 58 16 AM"
src="https://github.com/user-attachments/assets/78b348bd-1b91-478b-a850-8e526adcfb3c"
/>

*After:*

<img width="627" height="563" alt="Screenshot 2025-12-20 at 10 58 21 AM"
src="https://github.com/user-attachments/assets/1176d626-563f-455a-9902-137f646eb8f2"
/>

*Before:*

<img width="628" height="550" alt="Screenshot 2025-12-20 at 10 58 06 AM"
src="https://github.com/user-attachments/assets/d819f478-bb2d-4afd-8013-c4e1a2f64dfe"
/>

*After:*

<img width="643" height="642" alt="Screenshot 2025-12-20 at 10 56 00 AM"
src="https://github.com/user-attachments/assets/e0f03549-77ed-4a47-b1da-239b519b90f4"
/>

---------

Co-authored-by: Finn Evers <finn.evers@outlook.de>
Co-authored-by: MrSubidubi <finn@zed.dev>

Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [ ] Unsafe blocks (if any) have justifying comments
- [ ] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [ ] Tests cover the new/changed behavior
- [ ] Performance impact has been considered and is acceptable

Closes #52926
Follow-up to #48861
cc @SomeoneToIgnore

Release Notes:

- Edited buffers are no longer saved by default before running a task,
but you can still configure this using the "save" field in `tasks.json`.

---------

Co-authored-by: Kirill Bulatov <mail4score@gmail.com>

Self-Review Checklist:

- [X] I've reviewed my own diff for quality, security, and reliability
- [ ] Unsafe blocks (if any) have justifying comments
- [ ] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [ ] Tests cover the new/changed behavior
- [ ] Performance impact has been considered and is acceptable

Release Notes:

- Added the option for highlights from languages to specify fallbacks.
That means that if you have a pattern with the captures `@second.capture
@first.capture`, Zed will first try resolving a highlight from your
theme for the code fragment using the first capture, then look for the
second capture if no match for the first capture could be found.

---------

Co-authored-by: Kirill Bulatov <kirill@zed.dev>

Release Notes:

- N/A

Make sure we don't try and load a thread we don't have metadata for and
therefore is unlikely to exist

Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable

Release Notes:

- N/A

We were inserting threads with no entries into the sidebar, when you
clicked on New Thread, typed a message and then added a new project to
the current workspace.
We now skip persisting threads when they are empty.

Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable

Release Notes:

- N/A

---------

Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>

This was missing from the previous permissions changes.

Self-Review Checklist:

- [X] I've reviewed my own diff for quality, security, and reliability
- [ ] Unsafe blocks (if any) have justifying comments
- [ ] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [ ] Tests cover the new/changed behavior
- [X] Performance impact has been considered and is acceptable

Release Notes:

- N/A

Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable

Closes #52882, should help #52723

According to the [Zed
documentation](https://zed.dev/docs/semantic-tokens#example-disabling-a-token-type),
users should be able to disable semantic highlighting for a specific
token type by adding an empty rule in `settings.json`.

However, the current implementation fails to respect this because its
merging logic allows lower-priority default styles to "leak through"
even when a matching high-priority rule is empty. This makes it
impossible to selectively disable semantic tokens to reveal the
underlying Tree-sitter highlighting when using "semantic_tokens":
"combined". This is particularly problematic for extensions that provide
specialized Tree-sitter queries which are currently being obscured by
less desirable semantic tokens(#52723).

This PR fixes the logic to ensure that a completely empty high-priority
rule acts as an opaque override, correctly disabling semantic styling
for that token type and allowing Tree-sitter highlighting to show
through as intended.

Release Notes:

- Fixed a bug where semantic token highlighting could not be disabled
via empty rules in `settings.json`.

Closes #51573
Closes #52852 * I believe, looking for verification of that.

A very similar issue was belived to be fixed with #51642 , however it
seems like there is still some edge cases that were causing crashes.
These issues appeared to me to be caused by the dedup method failing to
catch sub-ranges (created by entering SelectMode after the search) as
duplicates.

two new tests that isolate the case in 51573 and 52852 respectively.

fixed vid:


https://github.com/user-attachments/assets/f62d5210-6cb3-4bdf-a061-efc265eb2804



Self-Review Checklist:

- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable



Release Notes:

- helix: Fix search selection range deduplication logic

Closes #46933 

Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [x] NO UI CHANGES


Release Notes:
- Fixed `Failed to load shell environment` errors on Windows when users
have custom terminal shell arguments configured (e.g., cmd.exe with `/k
echo Hello` or similar startup commands)

This fixes three pre-existing issues in the visual test runner that were
never caught because visual tests aren't run in CI.

## Fixes

**1. Re-entrant read panic in sidebar creation (3 places)**

`Sidebar::new` reads the `MultiWorkspace` entity, so creating it inside
a `multi_workspace.update()` closure causes a `cannot read while being
updated` panic. Fixed by using `update_window` with
`root_view.downcast()` to get the handle without holding a mutable
borrow.

**2. Tooltip entity leak in breakpoint_hover test**

The tooltip system has an Rc cycle (`ActiveTooltip::Visible` holds a
`check_visible_and_update` closure that captures the
`Rc<RefCell<Option<ActiveTooltip>>>`). This cycle is normally broken
when the tooltip is dismissed, but the test closed the window while the
tooltip was still visible, causing a panic from the leak detector. Fixed
by simulating a click before cleanup to dismiss the tooltip.

**3. Visual tests not in CI**

Added a `cargo_run_visual_tests` step to the macOS test job via xtask so
these tests run on every PR and regressions are caught early.

Release Notes:

- N/A