Closes #ISSUE

Rewrite our release pipeline to be generated by `gh-workflow`

Release Notes:

- N/A *or* Added/Fixed/Improved ...

Closes #17524

This PR adds a button to the bottom right corner of the ollama settings
ui. It resets the available ollama models, also resets the "Connected"
state in the process. This means it can be used to check if the
connection is still valid as well. It's a question whether we should
clear the available models on ALL `fetch_models` calls, since these only
happen during auth anyway.

Ollama is a local model provider which means clicking the refresh button
often only flashes the "not connected" state because the latency of the
request is so low. This accentuates changes in the UI, however I don't
think there's a way around this without adding some rather cumbersome
deferred ui updates.

I've attached the refresh button to the "Connected" `ButtonLike`, since
I don't think automatic UI spacing should separate these elements. I
think this is okay because the "Connected" isn't actually something that
the user can interact with.

Before: 
<img width="211" height="245" alt="image"
src="https://github.com/user-attachments/assets/ea90e24a-b603-4ee2-9212-2917e1695774"
/>

After: 
<img width="211" height="250" alt="image"
src="https://github.com/user-attachments/assets/be9af950-86a2-4067-87a0-52034a80a823"
/>


Alternative approach: There was also a suggestion to simply add a entry
to the command palette, however none of the other providers have this
ability currently either so I went with this approach. The current
approach also makes it more discoverable to the user.

Release Notes:

- Added a button for refreshing available ollama models

---------

Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>

Closes #ISSUE

Release Notes:

- N/A

Release Notes:

- N/A

Closes #41313

Release Notes:

- Fixes #41313

<img width="453" height="870" alt="Screenshot 2025-10-27 at 10 23 37 PM"
src="https://github.com/user-attachments/assets/93bfba18-1bff-494e-a4c2-05b54ad6eed8"
/>

Co-authored-by: Richard Feldman <oss@rtfeldman.com>

Fixes ZED-29Z

Release Notes:

- Fixed panic in `refresh_linked_ranges`

Closes #41478

Release Notes:

- Fixed #41478

<img width="459" height="916" alt="Screenshot 2025-10-29 at 1 31 26 PM"
src="https://github.com/user-attachments/assets/1d5b9fdf-9800-44e4-bdd5-f0964f93625f"
/>

> caused by using haiku 4.5 from the anthropic provider and then
swapping to sonnet 3.7 through zed, doing this does mess with prompt
caching but a model swap already invalidates that so it shouldn't have
any cost impact on end users

Update the behavior of the `zed_actions::agent::AddSelectionToThread`
action so that, after the selecitons are added to the current thread,
the editor automatically scrolls to the cursor's position, fixing an
issue where the inserted selection's UI component could wrap the cursor
to the next line below, leaving it outside the viewable area.

Closes #39694

Release Notes:

- Improved the `agent: add selection to thread` action so as to
automatically scroll to the cursor's position after selections are
inserted

Update `Vim::activate` to ensure that the `Vim.focused` method is only
called if the associated editor is also focused.

This ensures that the `VimEvent::Focused` event is only emitted when the
editor is actually focused, preventing a bug where, after starting Zed,
Vim's mode indicator would show that the mode was `Insert` even though
it was in `Normal` mode in the main editor.

Closes #41353 

Release Notes:

- Fixed vim's mode being shown as `Inserted` right after opening Zed

Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>

When rerunning a task, our process id fetching seems to sometimes return
the previous terminal's process id when respawning the task, causing us
to kill the new terminal once the previous one drops as we spawn a new
one, then drop the old one. This results in rerun sometimes spawning a
blank task as the terminal immediately exits. The fix here is simple, we
actually want to kill the process running inside the terminal process,
not the terminal process itself when we exit in the terminal.

No relnotes as this was introduced yesterday in
https://github.com/zed-industries/zed/pull/41562

Release Notes:

- N/A *or* Added/Fixed/Improved ...

Fixes ZED-2TR
Fixes ZED-2TQ
Fixes ZED-2TB
Fixes ZED-2SW
Fixes ZED-2SQ

Release Notes:

- Fixed panic in repainting hover popups

Co-authored by: David <david@zed.dev>

Closes https://github.com/zed-industries/zed/issues/41633

Release Notes:

- N/A

Release Notes:

- N/A *or* Added/Fixed/Improved ...

Co-authored by: Kate <kate@zed.dev>

Release Notes:

- Increased the max size of picker based UI

Closes #41125

Release Notes:

- Fixed `SwitchToHelixNormalMode` to keep selection
- Added default keybinds for `SwitchToHelixNormalMode` when in Helix
mode

Testing PR for @zed-zippy

Release Notes:

- N/A

Release Notes:

- N/A

Release Notes:

- N/A

Closes #40796


Release Notes:

- Fixed an issue where `~` would not be expanded when specifiying the
path of an ACP server

Closes #39937

Release Notes:

- Fixed expand/collapse all entries not working in singleton buffer mode

Release Notes:

- N/A

---------

Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Oleksiy Syvokon <oleksiy.syvokon@gmail.com>

- Update `vim::normal::Vim.normal_replace` to work with more than one
  character
- Add `vim::replace::Vim.paste_replace` to handle pasting the 
  clipboard's contents while in replace mode
- Update vim's handling of the `editor::actions::Paste` action so that
  the `paste_replace` method is called when vim is in replace mode,
  otherwise it'll just call the regular `editor::Editor.paste` method

Closes #41378 

Release Notes:

- Improved pasting while in Vim's Replace mode, ensuring that the Zed
replaces the same number of characters as the length of the contents
being pasted

This PR fixes breakpoint icon alignment to also be at the end of a
rendered entry and enables editing breakpoint qualities when there's no
active session.

The alignment issue was caused by some icons being invisible, so the
layout phase always accounted for the space they would take up. Only
laying out the icons when they are visible fixed the issue.

#### Before
<img width="1014" height="316" alt="image"
src="https://github.com/user-attachments/assets/9a9ced06-e219-4d9d-8793-6bdfdaca48e8"
/>

#### After
[
<img width="502" height="167" alt="Screenshot 2025-10-30 at 3 21 17 PM"
src="https://github.com/user-attachments/assets/23744868-e354-461c-a940-9b6812e1bcf4"
/>
](url)

Release Notes:

- Breakpoint list: Allow adding conditions, logs, and hit conditions to
breakpoints when there's no active session

Closes #40360

This PR added heuristics to determine what variable/breakpoint list
entry has the longest width when rendered. I added this in so the
uniform list would correctly determine which item has the longest width
and use that to calculate the scrollbar size.

The heuristic can be off if a non-mono space font is used in the UI; in
most cases, it's more than accurate enough though.

Release Notes:

- debugger: Add horizontal scroll bars to variable list, memory view,
and breakpoint list

---------

Co-authored-by: MrSubidubi <dev@bahn.sh>

Release Notes:

- N/A

Co-authored by: Max Brunsfeld <max@zed.dev>

When doing a project wide search in zed on windows for `hang`, zed
starts to freeze for a couple seconds ultimately starting to error with
`Not enough quota is available to process this command.` when
dispatching windows messages. The cause for this is that we simply
overload the windows message pump due to the sheer amount of foreground
tasks we spawn when we populate the project search.

This PR is an attempt at reducing this.

Release Notes:

- Reduced hangs and stutters in large project file searches

This ensures the thread summary is treated as a tracked mention with
accessible context.

Changes:
- Fixed `MessageEditor::insert_thread_summary()` to use proper mention
URI format
- Added test coverage to verify the fix

Release Notes:

- Fixed an issue where "New From Summary" was not properly inserting
thread summaries as contextual mentions when creating new threads.
Thread summaries are now inserted as proper mention URIs.

Release Notes:

- Fixed an issue where `agent: Chat with follow` was not working anymore

Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>

Related to issue: #40887

Release Notes:

- N/A

Co-authored-by: Remco Smits <djsmits12@gmail.com>

Release Notes:

- N/A

Attempt 2 for https://github.com/zed-industries/zed/pull/40774

We were spawning the process on the foreground thread before which can
block an arbitrary amount of time. Likewise we no longer block
deserialization on the terminal loading.

Release Notes:

- Improved startup time on systems with slow process spawning
capabilities

Release Notes:

- N/A

Release Notes:

- Fixed terminal processes occasionally leaking

Co-authored by: Jakub <jakub@zed.dev>

Adds an action to open the notes for the currently selected channel in
the collab panel, which is mapped to `alt-enter` in all platforms.

Release Notes:

- collab: Add `collab_panel::OpenSelectedChannelNotes` action
(`alt-enter` by default)

Add default keybinding for `pane::SplitRight` in the `Terminal` context
for all platforms.

Closes #ISSUE

Release Notes:

- Added VS Code's terminal split keybindings (`cmd` on MacOS,
`ctrl-shift-5` on Windows and Linux)

---------

Co-authored-by: dino <dinojoaocosta@gmail.com>

Release Notes:

- Fixed an issue where Zed would try to install extensions specified
under `auto_install_extensions` which were moved into core.

Closes #39515

**Details:**
- Improved logic for formatting completion labels, as some (such as
`namespace`) were missing space characters.
- Added extra logic as per stale PR #39533
[comment](https://github.com/zed-industries/zed/pull/39533#issuecomment-3368549433)
ensuring that cases where extra spaces are not necessary (such as
functions) are not affected
- I will note, I was not able to figure out how to fix the coloring of
`namespace` within completion labels as mentioned in that comment, if
someone would provide me with direction I would be happy to look into
that too.

Previous:
<img width="812" height="530" alt="previous"
src="https://github.com/user-attachments/assets/b38f1590-ca2d-489d-9dcb-2d478eb6ed03"
/>

Fixed:
<img width="812" height="530" alt="fixed"
src="https://github.com/user-attachments/assets/020b151d-e5d9-467e-99c1-5b0cab057169"
/>


Release Notes:

- Fixed minor issue where some `clangd` labels would be missing a space
in formatting

I just pulled and ran a local build via `script/bundle-mac -l -i` but
found that the resulting bundle wasn't installed as expected. (me:
"ToggleAllDocks!! Wait! Where is it?!") Looking into, it looks like the
`-l` flag was removed in #41392, leaving the `$local_only` var orphaned,
which then left the `-i/$local_install` flag unreachable. I suspect that
this was unintentional, so this PR re-adds the `-l/$local_only` flag to
`script/bundle-mac`.

I ran the build again and confirmed that local install seemed to work as
expected. (ie "ToggleAllDocks!! :tada:")

While here, I also removed the last reference to `$local_arch`, because
all other references to that were removed in #41392.

/cc @osiewicz 

Release Notes:

- N/A

---------

Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>

This re-implements the reverted commit 8b051d6cc3c7c3bcda16702f30dc0fabe7b9f881.

Closes #ISSUE

Release Notes:

- N/A

---------

Co-authored-by: Ben Kunkle <ben@zed.dev>

Follow up to https://github.com/zed-industries/zed/pull/41507 as I
realized I didn't change the title for this section.

Release Notes:

- N/A

Closes https://github.com/zed-industries/zed/issues/41500

<img width="500" height="1122" alt="Screenshot 2025-10-29 at 9  43@2x"
src="https://github.com/user-attachments/assets/ac2a81ad-99bb-43cd-b032-f2485fc23166"
/>

Release Notes:

- Added the ability to switch between configured edit prediction
providers through the status bar menu.