Closes https://github.com/rzukic/zed-latex/issues/70 where the language
server `texlab` is not used for code formatting when the "cspell"
extension is also installed, because it also provides a language server
for the LaTeX filetype but only for spell checking.

Release Notes:

- Fix conflict between LaTeX and cspell extensions affecting code formatting on save.

- Add instructions in description to read before editing
- Add instructions in edit prefix to explicitly ask for reads
- Fix `connection error: delay between messages too long` by processing
chunks off a channel

Release Notes:

- N/A

Release Notes:

- N/A

Co-authored-by: Ben <ben@zed.dev>

This PR adds the `create-file` and `copy-path` tools to the "Code
Writer" profile.

Release Notes:

- N/A

Closes #10832

Note: This PR only fixes the issue where when entering one of `except`,
`finally`, `else`, and `elif` after another block like so:

```python
try:
    for i in range(n):
        pass
except:|
```

The `except` would be indented resulting in the following:

```python
try:
    for i in range(n):
        pass
    except:|
```

This PR does not fix a separate issue in which the indentation is not
corrected from the second example to the first, i.e. if example 2 is
typed verbatim in Zed it will not auto-indent to look like example 1.
Handling of this case would likely require specific logic to handle, or
changes to the tree-sitter grammar for Python, as the current grammar
results in ERROR nodes that obscure the natural structure (cannot tie
the `except` to the `try`)

Release Notes:

- Fixed an issue where `except`, `finally`, `else`, and `elif` control
flow keywords in Python would be incorrectly indented when entered at
the correct level of indentation.

<img width="627" alt="Screenshot 2025-03-24 at 12 52 04 PM"
src="https://github.com/user-attachments/assets/0e8c061a-11c5-4d60-a694-55575b6c8f5e"
/>

Release Notes:

- N/A

Follow-up of
https://github.com/zed-industries/zed/pull/27424/files#r2012188255

Release Notes:

- N/A

Fixes Nightly builds for macOS.

Release Notes:

- N/A

Closes: https://github.com/zed-industries/zed/issues/13089

This PR attempts to resolve the issues discussed in my previous PR
#26146.

Release Notes:

- Fixed: `inactiveRegions` doesn't replace existing diagnostics anymore

Closes #22410

With this PR extensions can provide additional workspace configuration
for other LSP Adapters. This allows extensions like Astro, Svelte, Vue,
etc to provide plugins for vtsls typescript server, fixing issues like:
https://github.com/zed-industries/zed/issues/4577,
https://github.com/zed-industries/zed/issues/21697,
https://github.com/zed-industries/zed/issues/26901#issuecomment-2737485096

Todo:

- [x] Test case when extension is installed, does vtsls workspace config
refreshes?

Before:
<img width="450" alt="image"
src="https://github.com/user-attachments/assets/f242167c-5264-44ab-b5a7-8c90eb75c6a1"
/>

After:
<img width="450" alt="image"
src="https://github.com/user-attachments/assets/6a5f1afe-a0e1-4f64-8a95-919b0bf97614"
/>

Release Notes:

- N/A

Release Notes:

- N/A

Release Notes:

- N/A

---------

Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>

Release Notes:

- Improved user menu placement

| Before | After |
| --- | --- |
| ![Pasted image
(2)](https://github.com/user-attachments/assets/fae750fd-d6bc-45d2-9ab0-7a1a1c6262ba)
|
![image](https://github.com/user-attachments/assets/c5d0453f-5bd5-45e2-a56d-e200e90c0a2a)
|

- Follow-up to: #25529 

Release Notes:

- Added Claude Sonnet 3.7 Thought to GitHub Copilot Chat

Release Notes:

- Fixed an issue where both the predict edit and git onboarding banners
would both show at the same time.

Closes #22015


Release Notes:

- N/A

It turns out that on linux crane's `buildDepsOnly` was working fine, so
I'm re-enabling it and will worry about why it's failing on darwin
later.

This should significantly improve the amount of artifact-reuse for the
linux nix builds, which will hopefully bring build times low enough that
we're ok putting it in CI.

Release Notes:

- N/A

Release Notes:

- Changed the default edit prediction provider from Copilot to Zed

Another step towards having `zlog` as the default logging solution in
Zed.
The new ScopeMap replaces the previous HashMap based implementation used
for scope lookups to:

A. Reduce complexity
B. Increase speed at which non-enabled logs can be filtered out
C. Provide more granular control over how scopes are determined to be
enabled/disabled,
   and what caching/other speed increase opportunities are available

Release Notes:

- N/A

<img width="631" alt="Screenshot 2025-03-24 at 11 01 10 AM"
src="https://github.com/user-attachments/assets/7e144619-83d0-4455-8d80-cc7ec6a7b03e"
/>

Release Notes:

- N/A

Closes #ISSUE
/cc @RemcoSmitsDev 

Release Notes:

- N/A

Also took the opportunity to rename the action to something that would
be clearer in the command palette, from `DeployPromptLibrary` to
`OpenPromptLibrary`.

Release Notes:

- N/A

---------

Co-authored-by: Marshall Bowers <git@maxdeviant.com>

Really small stuff, like adding icons and adjusting colors.

Release Notes:

- N/A

This PR improves the keyboard navigation for the variable list. 
Before this PR, if you want to open/close nested variables, you had to
use the right/left & up/down arrow keys.
Now you can step through with just only using your left/right arrow
keys, this feels a bit more natural and more similar to how other
editors allow you to navigate through variables.

This PR also fixes the following issues:
- Allow selecting a scope to be the start of your selection
- Allow selecting previous item if the first item is selected

-----


https://github.com/user-attachments/assets/aff0b133-97be-4c09-8ee6-b11495ad5568

Release Notes:

- N/A

This PR updates Copilot to use the official
[`@github/copilot-language-server`](https://github.com/github/copilot-language-server-release).

It's [available on
npm](https://www.npmjs.com/package/@github/copilot-language-server), so
we're installing it from there.

I tested it out locally and it seemed to be working as expected.

Release Notes:

- Updated Copilot to use the official
[`@github/copilot-language-server`](https://github.com/github/copilot-language-server-release).

This PR updates two existing settings to use the settings migrator
instead of a manually implemented visitor. Both of these settings were
changed prior to the introduction of automatic migrations and the
visitor ensured that the settings were kept backwards compatible. See
https://github.com/zed-industries/zed/pull/22200 and
https://github.com/zed-industries/zed/pull/22364 respectively.

WIth this change, existing user configurations are updated accordingly
and the corresponding settings can derive `Deserialize` again.

I also added tests for the replacement of settings values, as there was
no test for this behaviour. Additionally, I added a seperate test for
the existing migration of `always_show_close_button`, since that
migration updated both the key and value.

Release Notes:

- N/A

Release Notes:

- Fix (rare) panic in the project diff view

Caused by #27313

Release Notes:

- N/A

This PR forks a new version of the `zed_extension_api` in preparation
for new changes.

Release Notes:

- N/A

This PR adds the `move-path` tool to the "Code Writer" profile.

Release Notes:

- N/A

We decided to take this out for now. It doesn't seem necessary, and it
complicates the code a lot. We can always put it back later if desired.

Release Notes:

- N/A

Closes: https://github.com/zed-industries/zed/issues/27365

Release Notes:

- N/A

Release Notes:

- Fix rare crash when toggling deleted hunks.

---------

Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>

This is one of the causes for race conditions, but isn't a specific bug fix by itself.

Release Notes:

- N/A

Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>

https://github.com/user-attachments/assets/167f753f-2775-4d31-bfef-55565e61e4bc

Release Notes:

- N/A

## Before

<img width="627" alt="Screenshot 2025-03-24 at 12 55 15 PM"
src="https://github.com/user-attachments/assets/349d7025-e65e-4107-86ae-45eb321003b3"
/>

## After

<img width="627" alt="Screenshot 2025-03-24 at 12 52 04 PM"
src="https://github.com/user-attachments/assets/0e8c061a-11c5-4d60-a694-55575b6c8f5e"
/>

Release Notes:

- N/A

This is not going to fully fix the multi-root story, as we still need to
weave venvs through. Hence, no release note just yet.

Release Notes:

- N/A

Release Notes:

- N/A

This fixes a rare bug where a breakpoint isn't saved in the database
when a user toggles a breakpoint and immediately exits out of zed.

Release Notes:

- N/A

Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>

Switch back to xkbcommon releases after
https://github.com/rust-x-bindings/xkbcommon-rs/pull/54 got merged in
0.8.0

Release Notes:

- N/A

- **support alternate tag name node names to fix autoclosing of
`<Foo.Bar>` style tags in TSX**
- **remove checks against close tag name while checking if tag is
closed**
- **move jsx tag auto close tests into jsx_tag_auto_close.rs**

Closes #27335

Release Notes:

- Fixed an issue with JSX tag auto-close where components containing a
`.` access like `<Foo.Bar>` would be auto-closed as `</>` instead of
`</Foo.Bar>`

<img width="629" alt="Screenshot 2025-03-24 at 10 06 39 AM"
src="https://github.com/user-attachments/assets/b099fcc0-b2f4-44ee-8c8f-416808363689"
/>

Release Notes:

- N/A

---------

Co-authored-by: Marshall Bowers <git@maxdeviant.com>

Closes #27355 
This PR treat `bun.lock` file as `.jsonc`
note: 
[bun.lock](https://bun.sh/blog/bun-lock-text-lockfile) is a lockfile of
bun.js

Release Notes:

- Updated `bun.lock` files to be recognized as JSONC.

Related #14222

Release Notes:

- This PR updates `cosmic-text` dependency on `gpui` crate from `0.11.2`
to 0.13.2`. This decreases RAM usage zed depending on the amount of
monospace fonts installed on the system. On Arch Linux with `nerd-fonts`
package installed (which provides around 2000 monospaced fonts), it
decreases ram usage from ~800mb to around ~300mb.

- Updated `cosmic-text` to `0.13.2` on `gpui` crate

Mostly just adjusting spacing and making it consistent with how we
display other tool calls.

<img
src="https://github.com/user-attachments/assets/85892006-9029-4cb8-b805-bebe4232e458"
width="600px" />

Release Notes:

- N/A

Closes #26631

Release Notes:

- Fixed markdown preview not rendering bullet points beginning with HTML

Before:
<img width="822" alt="before"
src="https://github.com/user-attachments/assets/102a7eac-fcc2-457b-9587-4a021800841d"
/>


After:
<img width="822" alt="after"
src="https://github.com/user-attachments/assets/8544b318-0efa-46c3-bd9b-c6c21444fab7"
/>

Note: I thought it would make sense to return `true` in `is_text_like`
for `Event::InlineMath` and `Event::DisplayMath` as well, but it looks
like rendering inline math is not supported at all at the moment:


https://github.com/zed-industries/zed/blob/4402e033a47db8ab6bf05623a9f111dc7b44cbd5/crates/markdown/src/parser.rs#L108

Closes #16004.


![image](https://github.com/user-attachments/assets/73cfe9da-5575-4616-9ed0-99fcb3ab61f5)

Python formats file and line number references in the form `File
"file.py", line 8"`
I'm not a CPython expert, but from a quick look, they appear to come
from:
-
https://github.com/python/cpython/blob/80e00ecc399db8aeaa9f3a1c87a2cfb34517d7be/Python/traceback.c#L613
-
https://github.com/python/cpython/blob/80e00ecc399db8aeaa9f3a1c87a2cfb34517d7be/Python/traceback.c#L927
I am not aware of the possiblity to also encode the column information.

Release Notes:

- File, line references from Python, like 'File "file.py", line 8' are
now clickable in the terminal

---------

Co-authored-by: Kirill Bulatov <kirill@zed.dev>

- update tooltips of `auto_install_extensions` , `active_pane_modifiers`
- update docs of `auto_install_extensions`, `active_pane_modifiers`,
`buffer_line_height`

Release Notes:

- N/A

---------

Co-authored-by: Kirill Bulatov <mail4score@gmail.com>

This PR updates the Erlang docs to list the two language servers the
extension offers support for, as well as how to switch from `erlang_ls`
to `erlang-language-platform`.

Release Notes:

- N/A